linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 06/19] omap_hsmmc: Allow for power saving without going off
Date: Thu, 11 Feb 2010 16:51:22 -0800	[thread overview]
Message-ID: <20100212005122.24958.45328.stgit@baageli.muru.com> (raw)
In-Reply-To: <20100212004844.24958.29506.stgit@baageli.muru.com>

From: Adrian Hunter <adrian.hunter@nokia.com>

An eMMC may be always powered on, so that the lowest
power saving state possible is sleeping. Add a field
to the platform data to indicate that.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/hsmmc.c           |    3 +++
 arch/arm/mach-omap2/hsmmc.h           |    1 +
 arch/arm/plat-omap/include/plat/mmc.h |    3 +++
 drivers/mmc/host/omap_hsmmc.c         |    6 ++++++
 4 files changed, 13 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 4a05c37..e4ab123 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -202,6 +202,9 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
 		if (c->power_saving)
 			mmc->slots[0].power_saving = 1;
 
+		if (c->no_off)
+			mmc->slots[0].no_off = 1;
+
 		/* NOTE:  MMC slots should have a Vcc regulator set up.
 		 * This may be from a TWL4030-family chip, another
 		 * controllable regulator, or a fixed supply.
diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h
index f641f59..2453a7a 100644
--- a/arch/arm/mach-omap2/hsmmc.h
+++ b/arch/arm/mach-omap2/hsmmc.h
@@ -14,6 +14,7 @@ struct omap2_hsmmc_info {
 	bool	cover_only;	/* No card detect - just cover switch */
 	bool	nonremovable;	/* Nonremovable e.g. eMMC */
 	bool	power_saving;	/* Try to sleep or power off when possible */
+	bool	no_off;		/* power_saving and power is not to go off */
 	int	gpio_cd;	/* or -EINVAL */
 	int	gpio_wp;	/* or -EINVAL */
 	char	*name;		/* or NULL for default */
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index 8b23d32..b463949 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -96,6 +96,9 @@ struct omap_mmc_platform_data {
 		/* Try to sleep or power off when possible */
 		unsigned power_saving:1;
 
+		/* If using power_saving and the MMC power is not to go off */
+		unsigned no_off:1;
+
 		int switch_pin;			/* gpio (card detect) */
 		int gpio_wp;			/* gpio (write protect) */
 
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 2c5e15d..e15d0f4 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1656,6 +1656,9 @@ static int omap_hsmmc_disabled_to_sleep(struct omap_hsmmc_host *host)
 	dev_dbg(mmc_dev(host->mmc), "DISABLED -> %s\n",
 		host->dpm_state == CARDSLEEP ? "CARDSLEEP" : "REGSLEEP");
 
+	if (mmc_slot(host).no_off)
+		return 0;
+
 	if ((host->mmc->caps & MMC_CAP_NONREMOVABLE) ||
 	    mmc_slot(host).card_detect ||
 	    (mmc_slot(host).get_cover_state &&
@@ -1671,6 +1674,9 @@ static int omap_hsmmc_sleep_to_off(struct omap_hsmmc_host *host)
 	if (!mmc_try_claim_host(host->mmc))
 		return 0;
 
+	if (mmc_slot(host).no_off)
+		return 0;
+
 	if (!((host->mmc->caps & MMC_CAP_NONREMOVABLE) ||
 	      mmc_slot(host).card_detect ||
 	      (mmc_slot(host).get_cover_state &&

  parent reply	other threads:[~2010-02-12  0:51 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-02-12  0:51 [PATCH 00/19] omap updates for 2.6.34 merge window, part 2 Tony Lindgren
2010-02-12  0:51 ` [PATCH 01/19] omap_hsmmc: Move gpio and regulator control from board file Tony Lindgren
2010-02-12  0:51 ` [PATCH 02/19] omap: Rename mmc-twl4030 files to hsmmc Tony Lindgren
2010-02-12  0:51 ` [PATCH 03/19] omap: Rename hsmmc symbols to reflect independence from twl4030 Tony Lindgren
2010-02-12  0:51 ` [PATCH 04/19] omap: Reconnect hsmmc context loss count Tony Lindgren
2010-02-12  0:51 ` [PATCH 05/19] omap: RX51: Remux to pull eMMC lines down when powering off Tony Lindgren
2010-02-12  0:51 ` Tony Lindgren [this message]
2010-02-12  0:51 ` [PATCH 07/19] omap_hsmmc: Fix disable timeouts Tony Lindgren
2010-02-12  0:51 ` [PATCH 08/19] omap_hsmmc: Ensure regulator enable / disable are paired Tony Lindgren
2010-02-12  0:51 ` [PATCH 09/19] omap_hsmmc: Allow for a shared VccQ Tony Lindgren
2010-02-12  0:51 ` [PATCH 10/19] omap_hsmmc: allow compile without regulator framework Tony Lindgren
2010-02-12  0:51 ` [PATCH 11/19] omap3: Clean-up for omap_mux_init Tony Lindgren
2010-02-12  0:51 ` [PATCH 12/19] omap3: pm: Add T2 Keypad as a wakeup source Tony Lindgren
2010-02-12  0:51 ` [PATCH 13/19] AM35xx: Introduce am35xx.h file Tony Lindgren
2010-02-12  0:51 ` [PATCH 14/19] AM35xx: Add AM35xx intr_clr & sw_rst cntrl reg bit definition Tony Lindgren
2010-02-12  0:51 ` [PATCH 15/19] AM35xx: Update irq.h for AM35xx IPSS module interrupts Tony Lindgren
2010-02-12  0:51 ` [PATCH 16/19] arm: omap: kill compile warning on board-4430-sdp.c Tony Lindgren
2010-02-12  0:51 ` [PATCH 17/19] OMAP4: IRQ: Add McPDM IRQ definition Tony Lindgren
2010-02-12  0:51 ` [PATCH 18/19] ARM: OMAP4: Add McPDM base address Tony Lindgren
2010-02-12  0:51 ` [PATCH 19/19] OMAP4: MCPDM: Register McPDM platform device Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100212005122.24958.45328.stgit@baageli.muru.com \
    --to=tony@atomide.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).