From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 10/19] omap_hsmmc: allow compile without regulator framework
Date: Thu, 11 Feb 2010 16:51:31 -0800 [thread overview]
Message-ID: <20100212005131.24958.67879.stgit@baageli.muru.com> (raw)
In-Reply-To: <20100212004844.24958.29506.stgit@baageli.muru.com>
From: Adrian Hunter <adrian.hunter@nokia.com>
It is still possible to use the omap_hsmmc module
without the regulator framework. Accordingly, ifdef
out regulator-specific functions.
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/mmc/host/omap_hsmmc.c | 133 ++++++++++++++++++++++++-----------------
1 files changed, 79 insertions(+), 54 deletions(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index af37477..83f0aff 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -236,6 +236,8 @@ static int omap_hsmmc_resume_cdirq(struct device *dev, int slot)
#endif
+#ifdef CONFIG_REGULATOR
+
static int omap_hsmmc_1_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
@@ -357,59 +359,6 @@ static int omap_hsmmc_23_set_sleep(struct device *dev, int slot, int sleep,
return regulator_enable(host->vcc_aux);
}
-static int omap_hsmmc_gpio_init(struct omap_mmc_platform_data *pdata)
-{
- int ret;
-
- if (gpio_is_valid(pdata->slots[0].switch_pin)) {
- pdata->suspend = omap_hsmmc_suspend_cdirq;
- pdata->resume = omap_hsmmc_resume_cdirq;
- if (pdata->slots[0].cover)
- pdata->slots[0].get_cover_state =
- omap_hsmmc_get_cover_state;
- else
- pdata->slots[0].card_detect = omap_hsmmc_card_detect;
- pdata->slots[0].card_detect_irq =
- gpio_to_irq(pdata->slots[0].switch_pin);
- ret = gpio_request(pdata->slots[0].switch_pin, "mmc_cd");
- if (ret)
- return ret;
- ret = gpio_direction_input(pdata->slots[0].switch_pin);
- if (ret)
- goto err_free_sp;
- } else
- pdata->slots[0].switch_pin = -EINVAL;
-
- if (gpio_is_valid(pdata->slots[0].gpio_wp)) {
- pdata->slots[0].get_ro = omap_hsmmc_get_wp;
- ret = gpio_request(pdata->slots[0].gpio_wp, "mmc_wp");
- if (ret)
- goto err_free_cd;
- ret = gpio_direction_input(pdata->slots[0].gpio_wp);
- if (ret)
- goto err_free_wp;
- } else
- pdata->slots[0].gpio_wp = -EINVAL;
-
- return 0;
-
-err_free_wp:
- gpio_free(pdata->slots[0].gpio_wp);
-err_free_cd:
- if (gpio_is_valid(pdata->slots[0].switch_pin))
-err_free_sp:
- gpio_free(pdata->slots[0].switch_pin);
- return ret;
-}
-
-static void omap_hsmmc_gpio_free(struct omap_mmc_platform_data *pdata)
-{
- if (gpio_is_valid(pdata->slots[0].gpio_wp))
- gpio_free(pdata->slots[0].gpio_wp);
- if (gpio_is_valid(pdata->slots[0].switch_pin))
- gpio_free(pdata->slots[0].switch_pin);
-}
-
static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
{
struct regulator *reg;
@@ -488,6 +437,82 @@ static void omap_hsmmc_reg_put(struct omap_hsmmc_host *host)
mmc_slot(host).set_sleep = NULL;
}
+static inline int omap_hsmmc_have_reg(void)
+{
+ return 1;
+}
+
+#else
+
+static inline int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
+{
+ return -EINVAL;
+}
+
+static inline void omap_hsmmc_reg_put(struct omap_hsmmc_host *host)
+{
+}
+
+static inline int omap_hsmmc_have_reg(void)
+{
+ return 0;
+}
+
+#endif
+
+static int omap_hsmmc_gpio_init(struct omap_mmc_platform_data *pdata)
+{
+ int ret;
+
+ if (gpio_is_valid(pdata->slots[0].switch_pin)) {
+ pdata->suspend = omap_hsmmc_suspend_cdirq;
+ pdata->resume = omap_hsmmc_resume_cdirq;
+ if (pdata->slots[0].cover)
+ pdata->slots[0].get_cover_state =
+ omap_hsmmc_get_cover_state;
+ else
+ pdata->slots[0].card_detect = omap_hsmmc_card_detect;
+ pdata->slots[0].card_detect_irq =
+ gpio_to_irq(pdata->slots[0].switch_pin);
+ ret = gpio_request(pdata->slots[0].switch_pin, "mmc_cd");
+ if (ret)
+ return ret;
+ ret = gpio_direction_input(pdata->slots[0].switch_pin);
+ if (ret)
+ goto err_free_sp;
+ } else
+ pdata->slots[0].switch_pin = -EINVAL;
+
+ if (gpio_is_valid(pdata->slots[0].gpio_wp)) {
+ pdata->slots[0].get_ro = omap_hsmmc_get_wp;
+ ret = gpio_request(pdata->slots[0].gpio_wp, "mmc_wp");
+ if (ret)
+ goto err_free_cd;
+ ret = gpio_direction_input(pdata->slots[0].gpio_wp);
+ if (ret)
+ goto err_free_wp;
+ } else
+ pdata->slots[0].gpio_wp = -EINVAL;
+
+ return 0;
+
+err_free_wp:
+ gpio_free(pdata->slots[0].gpio_wp);
+err_free_cd:
+ if (gpio_is_valid(pdata->slots[0].switch_pin))
+err_free_sp:
+ gpio_free(pdata->slots[0].switch_pin);
+ return ret;
+}
+
+static void omap_hsmmc_gpio_free(struct omap_mmc_platform_data *pdata)
+{
+ if (gpio_is_valid(pdata->slots[0].gpio_wp))
+ gpio_free(pdata->slots[0].gpio_wp);
+ if (gpio_is_valid(pdata->slots[0].switch_pin))
+ gpio_free(pdata->slots[0].switch_pin);
+}
+
/*
* Stop clock to the card
*/
@@ -2119,7 +2144,7 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev)
}
}
- if (!mmc_slot(host).set_power) {
+ if (omap_hsmmc_have_reg() && !mmc_slot(host).set_power) {
ret = omap_hsmmc_reg_get(host);
if (ret)
goto err_reg;
next prev parent reply other threads:[~2010-02-12 0:51 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-12 0:51 [PATCH 00/19] omap updates for 2.6.34 merge window, part 2 Tony Lindgren
2010-02-12 0:51 ` [PATCH 01/19] omap_hsmmc: Move gpio and regulator control from board file Tony Lindgren
2010-02-12 0:51 ` [PATCH 02/19] omap: Rename mmc-twl4030 files to hsmmc Tony Lindgren
2010-02-12 0:51 ` [PATCH 03/19] omap: Rename hsmmc symbols to reflect independence from twl4030 Tony Lindgren
2010-02-12 0:51 ` [PATCH 04/19] omap: Reconnect hsmmc context loss count Tony Lindgren
2010-02-12 0:51 ` [PATCH 05/19] omap: RX51: Remux to pull eMMC lines down when powering off Tony Lindgren
2010-02-12 0:51 ` [PATCH 06/19] omap_hsmmc: Allow for power saving without going off Tony Lindgren
2010-02-12 0:51 ` [PATCH 07/19] omap_hsmmc: Fix disable timeouts Tony Lindgren
2010-02-12 0:51 ` [PATCH 08/19] omap_hsmmc: Ensure regulator enable / disable are paired Tony Lindgren
2010-02-12 0:51 ` [PATCH 09/19] omap_hsmmc: Allow for a shared VccQ Tony Lindgren
2010-02-12 0:51 ` Tony Lindgren [this message]
2010-02-12 0:51 ` [PATCH 11/19] omap3: Clean-up for omap_mux_init Tony Lindgren
2010-02-12 0:51 ` [PATCH 12/19] omap3: pm: Add T2 Keypad as a wakeup source Tony Lindgren
2010-02-12 0:51 ` [PATCH 13/19] AM35xx: Introduce am35xx.h file Tony Lindgren
2010-02-12 0:51 ` [PATCH 14/19] AM35xx: Add AM35xx intr_clr & sw_rst cntrl reg bit definition Tony Lindgren
2010-02-12 0:51 ` [PATCH 15/19] AM35xx: Update irq.h for AM35xx IPSS module interrupts Tony Lindgren
2010-02-12 0:51 ` [PATCH 16/19] arm: omap: kill compile warning on board-4430-sdp.c Tony Lindgren
2010-02-12 0:51 ` [PATCH 17/19] OMAP4: IRQ: Add McPDM IRQ definition Tony Lindgren
2010-02-12 0:51 ` [PATCH 18/19] ARM: OMAP4: Add McPDM base address Tony Lindgren
2010-02-12 0:51 ` [PATCH 19/19] OMAP4: MCPDM: Register McPDM platform device Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100212005131.24958.67879.stgit@baageli.muru.com \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).