From: paul@pwsan.com (Paul Walmsley)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 03/19] OMAP3: clock: use std _MASK suffix for CM_FCLKEN_IVA2 defines
Date: Mon, 15 Feb 2010 18:24:43 -0700 [thread overview]
Message-ID: <20100216012441.1101.85404.stgit@localhost.localdomain> (raw)
In-Reply-To: <20100216011942.1101.14348.stgit@localhost.localdomain>
From: Kevin Hilman <khilman@deeprootsystems.com>
Add _MASK suffix to CM_FCLKEN_IVA2 bitfieds to conform with the rest
of the usage in cm-regbits-34xx.h of using _SHIFT and _MASK suffixes.
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/cm-regbits-34xx.h | 2 +-
arch/arm/mach-omap2/pm34xx.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 6923deb..a76e835 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -55,7 +55,7 @@
/* Bits specific to each register */
/* CM_FCLKEN_IVA2 */
-#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2 (1 << 0)
+#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK (1 << 0)
#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT 0
/* CM_CLKEN_PLL_IVA2 */
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 5087b15..62e27aa 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -688,7 +688,7 @@ static void __init omap3_iva_idle(void)
OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
/* Enable IVA2 clock */
- cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2,
+ cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK,
OMAP3430_IVA2_MOD, CM_FCLKEN);
/* Set IVA2 boot mode to 'idle' */
next prev parent reply other threads:[~2010-02-16 1:24 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-16 1:24 [PATCH 00/19] OMAP: more clock/powerdomain/hwmod patches for 2.6.34 Paul Walmsley
2010-02-16 1:24 ` [PATCH 01/19] OMAP: omap_device: add omap_device_is_valid() Paul Walmsley
2010-02-16 1:24 ` [PATCH 02/19] OMAP: omap_device: when 'called from invalid state', print state Paul Walmsley
2010-02-16 1:24 ` Paul Walmsley [this message]
2010-02-16 1:24 ` [PATCH 04/19] OMAP3: Clock: Added IDLEST definitions for SGX Paul Walmsley
2010-02-16 1:24 ` [PATCH 05/19] OMAP2/3 PM: Adding powerdomain APIs for reading the next logic and mem state Paul Walmsley
2010-02-16 1:24 ` [PATCH 06/19] OMAP3 PM: Defining .pwrsts_logic_ret field for core power domain structure Paul Walmsley
2010-02-16 1:24 ` [PATCH 07/19] OMAP3 PM: Adding counters for power domain logic off and mem off during retention Paul Walmsley
2010-02-16 1:24 ` [PATCH 08/19] OMAP2/3 clock: Extend find_idlest() to pass back idle state value Paul Walmsley
2010-02-16 1:24 ` [PATCH 09/19] AM35xx: Add clock support for new modules on AM35xx Paul Walmsley
2010-02-16 1:24 ` [PATCH 10/19] OMAP3 clock: Check return values for clk_get() Paul Walmsley
2010-02-16 1:24 ` [PATCH 11/19] OMAP2/3: PRCM: fix misc. compiler warnings Paul Walmsley
2010-02-16 1:24 ` [PATCH 12/19] OMAP3 clock: Remove FreqSel for 3630 Paul Walmsley
2010-02-16 11:00 ` Sergei Shtylyov
2010-02-16 18:10 ` Paul Walmsley
2010-02-16 1:24 ` [PATCH 13/19] OMAP3: hwmod: support to specify the offset position of various SYSCONFIG register bits Paul Walmsley
2010-02-16 1:24 ` [PATCH 14/19] OMAP: HWMOD: Add support for early device register into omap device layer Paul Walmsley
2010-02-16 1:24 ` [PATCH 15/19] OMAP3630: Clock: Workaround for DPLL HS divider limitation Paul Walmsley
2010-02-16 1:25 ` [PATCH 16/19] ARM: OMAP4 clock domain: Add check for avoiding dependency related update Paul Walmsley
2010-02-16 1:25 ` [PATCH 17/19] OMAP3 clock: introduce DPLL4 Jtype Paul Walmsley
2010-02-16 1:25 ` [PATCH 18/19] OMAP3 clock: Introduce 3630 DPLL4 HSDivider changes Paul Walmsley
2010-02-16 1:25 ` [PATCH 19/19] OMAP3 clock: add support for 192Mhz DPLL4M2 output Paul Walmsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100216012441.1101.85404.stgit@localhost.localdomain \
--to=paul@pwsan.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).