From: linux@arm.linux.org.uk (Russell King - ARM Linux)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: Add Versatile Express support
Date: Fri, 5 Mar 2010 22:36:34 +0000 [thread overview]
Message-ID: <20100305223634.GA20095@n2100.arm.linux.org.uk> (raw)
In-Reply-To: <000101cabc6f$b54b4080$1fe1c180$@tuckley@arm.com>
On Fri, Mar 05, 2010 at 02:25:29PM -0000, Colin Tuckley wrote:
> For some reason you seem to have renamed the "System Register Interface" to
> "configuration register interface"
No I have not - I'm using the terminology found in the ARM documentation:
Configuration Data Register, SYS_CFG registers
The SYS_CFG registers enable communication between the MCC and DCC to
read and write a variety of system parameters, for example:
? oscillators
? voltage
? current
? power.
...
There's many more references to these being 'configuration' registers
in the user guides for these boards. I see no sign of it being called
by any different name.
Maybe the documentation on the ARM website is out of date? In any case,
it would seem that I'm using the publically documented names for these
interfaces.
next prev parent reply other threads:[~2010-03-05 22:36 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-05 9:54 Cleanup ARM platform support, and add Versatile Express support Russell King - ARM Linux
2010-03-04 19:11 ` [PATCH] ARM: Fix Versatile&Integrator includes to behave in the same way as Realview Russell King
2010-03-04 19:11 ` [PATCH] ARM: Improve documentation in arm_timer.h Russell King
2010-03-04 19:11 ` [PATCH] ARM: Integrator: convert to generic time support Russell King
2010-03-04 19:11 ` [PATCH] ARM: Integrator: convert to generic clockevent support Russell King
2010-03-04 19:11 ` [PATCH] ARM: Integrator: pass 'khz' to integrator_time_init Russell King
2010-03-04 19:11 ` [PATCH] ARM: Realview/Versatile/Integrator: remove unused definitions from platform.h Russell King
2010-03-04 19:11 ` [PATCH] ARM: Integrator: fix Integrator/CP definitions, move to platform.h Russell King
2010-03-04 19:11 ` [PATCH] ARM: Integrator: allow IO_ADDRESS() to be used for register addresses Russell King
2010-03-04 19:11 ` [PATCH] ARM: Integrator: convert to use register definitions Russell King
2010-03-04 19:11 ` [PATCH] ARM: ICST: merge common ICST VCO structures Russell King
2010-03-04 19:11 ` [PATCH] ARM: ICST: icst.*_ps_to_vco() functions are unused, remove them Russell King
2010-03-04 19:11 ` [PATCH] ARM: ICST: provide definitions for max/min VCO frequencies Russell King
2010-03-04 19:11 ` [PATCH] ARM: ICST: use Hz instead of kHz Russell King
2010-03-04 19:11 ` [PATCH] ARM: ICST: move minimum VCO frequency to icst_params Russell King
2010-03-04 19:11 ` [PATCH] ARM: ICST: indirect s2div and idx2s arrays via icst_params Russell King
2010-03-04 19:11 ` [PATCH] ARM: ICST: kill duplicate icst code Russell King
2010-03-04 19:11 ` [PATCH] ARM: Realview/Versatile/Integrator: separate out common clock code Russell King
2010-03-04 19:11 ` [PATCH] ARM: Realview/Versatile: separate out common SP804 timer code Russell King
2010-03-04 19:11 ` [PATCH] ARM: Realview/Versatile: remove useless TIMER_RELOAD calculations Russell King
2010-03-04 19:11 ` [PATCH] ARM: Realview/Versatile: don't use magic numbers for timer frequency Russell King
2010-03-04 19:11 ` [PATCH] ARM: Integrator: convert Integrator/CP to use SP804 timer support Russell King
2010-03-04 19:11 ` [PATCH] ARM: Integrator: move 16-bit timer support to Integrator/AP Russell King
2010-03-04 19:11 ` [PATCH] ARM: Realview/Versatile: separate out common sched_clock() Russell King
2010-03-04 19:11 ` [PATCH] ARM: Make Integrator/Versatile/Reaview VCO code similar Russell King
2010-03-04 19:11 ` [PATCH] ARM: 5890/1: Fix incorrect Realview board IRQs for L220 and PMU Russell King
2010-03-04 19:11 ` [PATCH] Video: ARM CLCD: Better fix for swapped IENB and CNTL registers Russell King
2010-03-04 19:11 ` [PATCH] ARM: Add L2 cache handling to smp boot support Russell King
2010-03-04 19:11 ` [PATCH] ARM: Indirect round/set_rate operations through clk structure Russell King
[not found] ` <git-1267729916-eaa5eec739637f32f8733d528ff0b94fd62b1214@rmk-PC>
2010-03-04 19:11 ` [PATCH] Merge branch 'origin' into versatile Russell King
2010-03-04 19:11 ` [PATCH] ARM: Add Versatile Express support Russell King
2010-03-04 19:11 ` [PATCH] ARM: Add Versatile Express CA9x4 processor support Russell King
2010-03-04 19:11 ` [PATCH] ARM: Add Versatile Express SMP support Russell King
2010-03-04 19:11 ` [PATCH] ARM: Versatile Express: support adjusting clock rates for CLCD Russell King
2010-03-05 22:52 ` Russell King - ARM Linux
2010-03-05 12:12 ` [PATCH] ARM: Add Versatile Express SMP support Colin Tuckley
2010-03-05 22:51 ` Russell King - ARM Linux
2010-03-05 10:47 ` [PATCH] ARM: Add Versatile Express CA9x4 processor support Albin Tonnerre
2010-03-05 12:08 ` Will Deacon
2010-03-05 20:43 ` Russell King - ARM Linux
2010-03-08 12:00 ` Will Deacon
2010-03-05 16:35 ` Colin Tuckley
2010-03-05 20:54 ` Russell King - ARM Linux
2010-03-05 10:27 ` [PATCH] ARM: Add Versatile Express support Albin Tonnerre
2010-03-05 10:29 ` Russell King - ARM Linux
2010-03-05 10:37 ` Albin Tonnerre
2010-03-05 14:25 ` Colin Tuckley
2010-03-05 22:36 ` Russell King - ARM Linux [this message]
2010-03-05 10:57 ` [PATCH] ARM: Realview/Versatile/Integrator: separate out common clock code Colin Tuckley
2010-03-05 14:30 ` [PATCH] ARM: Realview/Versatile/Integrator: separate outcommon " Catalin Marinas
2010-03-05 22:50 ` [PATCH] ARM: Realview/Versatile/Integrator: separate out common " Russell King - ARM Linux
2010-03-08 10:27 ` Cleanup ARM platform support, and add Versatile Express support Catalin Marinas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100305223634.GA20095@n2100.arm.linux.org.uk \
--to=linux@arm.linux.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).