* [PATCH] mxc: Change gpt timer code to be more generic by using V2 instead of MX3
@ 2010-04-21 18:34 Amit Kucheria
2010-04-22 11:41 ` Sascha Hauer
0 siblings, 1 reply; 2+ messages in thread
From: Amit Kucheria @ 2010-04-21 18:34 UTC (permalink / raw)
To: linux-arm-kernel
Replace mx3_ with v2_ since the register layout is the same for all SoCs using
version 2 of the timer (mx25, mx31, mx37 and now mx51)
Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
---
arch/arm/plat-mxc/time.c | 44 ++++++++++++++++++++++----------------------
1 files changed, 22 insertions(+), 22 deletions(-)
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index c1ce51a..714bdef 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -54,14 +54,14 @@
#define MX2_TSTAT_COMP (1 << 0)
/* MX31, MX35, MX25, MXC91231, MX5 */
-#define MX3_TCTL_WAITEN (1 << 3) /* Wait enable mode */
-#define MX3_TCTL_CLK_IPG (1 << 6)
-#define MX3_TCTL_FRR (1 << 9)
-#define MX3_IR 0x0c
-#define MX3_TSTAT 0x08
-#define MX3_TSTAT_OF1 (1 << 0)
-#define MX3_TCN 0x24
-#define MX3_TCMP 0x10
+#define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */
+#define V2_TCTL_CLK_IPG (1 << 6)
+#define V2_TCTL_FRR (1 << 9)
+#define V2_IR 0x0c
+#define V2_TSTAT 0x08
+#define V2_TSTAT_OF1 (1 << 0)
+#define V2_TCN 0x24
+#define V2_TCMP 0x10
#define timer_is_v1() (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
#define timer_is_v2() (!timer_is_v1())
@@ -76,7 +76,7 @@ static inline void gpt_irq_disable(void)
unsigned int tmp;
if (timer_is_v2())
- __raw_writel(0, timer_base + MX3_IR);
+ __raw_writel(0, timer_base + V2_IR);
else {
tmp = __raw_readl(timer_base + MXC_TCTL);
__raw_writel(tmp & ~MX1_2_TCTL_IRQEN, timer_base + MXC_TCTL);
@@ -86,7 +86,7 @@ static inline void gpt_irq_disable(void)
static inline void gpt_irq_enable(void)
{
if (timer_is_v2())
- __raw_writel(1<<0, timer_base + MX3_IR);
+ __raw_writel(1<<0, timer_base + V2_IR);
else {
__raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
timer_base + MXC_TCTL);
@@ -110,9 +110,9 @@ static cycle_t mx1_2_get_cycles(struct clocksource *cs)
return __raw_readl(timer_base + MX1_2_TCN);
}
-static cycle_t mx3_get_cycles(struct clocksource *cs)
+static cycle_t v2_get_cycles(struct clocksource *cs)
{
- return __raw_readl(timer_base + MX3_TCN);
+ return __raw_readl(timer_base + V2_TCN);
}
static struct clocksource clocksource_mxc = {
@@ -129,7 +129,7 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
unsigned int c = clk_get_rate(timer_clk);
if (timer_is_v2())
- clocksource_mxc.read = mx3_get_cycles;
+ clocksource_mxc.read = v2_get_cycles;
clocksource_mxc.mult = clocksource_hz2mult(c,
clocksource_mxc.shift);
@@ -153,16 +153,16 @@ static int mx1_2_set_next_event(unsigned long evt,
-ETIME : 0;
}
-static int mx3_set_next_event(unsigned long evt,
+static int v2_set_next_event(unsigned long evt,
struct clock_event_device *unused)
{
unsigned long tcmp;
- tcmp = __raw_readl(timer_base + MX3_TCN) + evt;
+ tcmp = __raw_readl(timer_base + V2_TCN) + evt;
- __raw_writel(tcmp, timer_base + MX3_TCMP);
+ __raw_writel(tcmp, timer_base + V2_TCMP);
- return (int)(tcmp - __raw_readl(timer_base + MX3_TCN)) < 0 ?
+ return (int)(tcmp - __raw_readl(timer_base + V2_TCN)) < 0 ?
-ETIME : 0;
}
@@ -192,8 +192,8 @@ static void mxc_set_mode(enum clock_event_mode mode,
if (mode != clockevent_mode) {
/* Set event time into far-far future */
if (timer_is_v2())
- __raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
- timer_base + MX3_TCMP);
+ __raw_writel(__raw_readl(timer_base + V2_TCN) - 3,
+ timer_base + V2_TCMP);
else
__raw_writel(__raw_readl(timer_base + MX1_2_TCN) - 3,
timer_base + MX1_2_TCMP);
@@ -245,7 +245,7 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
uint32_t tstat;
if (timer_is_v2())
- tstat = __raw_readl(timer_base + MX3_TSTAT);
+ tstat = __raw_readl(timer_base + V2_TSTAT);
else
tstat = __raw_readl(timer_base + MX1_2_TSTAT);
@@ -276,7 +276,7 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
unsigned int c = clk_get_rate(timer_clk);
if (timer_is_v2())
- clockevent_mxc.set_next_event = mx3_set_next_event;
+ clockevent_mxc.set_next_event = v2_set_next_event;
clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
clockevent_mxc.shift);
@@ -308,7 +308,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
if (timer_is_v2())
- tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
+ tctl_val = V2_TCTL_CLK_IPG | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
else
tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
--
1.7.0.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH] mxc: Change gpt timer code to be more generic by using V2 instead of MX3
2010-04-21 18:34 [PATCH] mxc: Change gpt timer code to be more generic by using V2 instead of MX3 Amit Kucheria
@ 2010-04-22 11:41 ` Sascha Hauer
0 siblings, 0 replies; 2+ messages in thread
From: Sascha Hauer @ 2010-04-22 11:41 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Apr 21, 2010 at 09:34:36PM +0300, Amit Kucheria wrote:
> Replace mx3_ with v2_ since the register layout is the same for all SoCs using
> version 2 of the timer (mx25, mx31, mx37 and now mx51)
Ok, applied.
>
> Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
> ---
> arch/arm/plat-mxc/time.c | 44 ++++++++++++++++++++++----------------------
> 1 files changed, 22 insertions(+), 22 deletions(-)
>
> diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
> index c1ce51a..714bdef 100644
> --- a/arch/arm/plat-mxc/time.c
> +++ b/arch/arm/plat-mxc/time.c
> @@ -54,14 +54,14 @@
> #define MX2_TSTAT_COMP (1 << 0)
>
> /* MX31, MX35, MX25, MXC91231, MX5 */
> -#define MX3_TCTL_WAITEN (1 << 3) /* Wait enable mode */
> -#define MX3_TCTL_CLK_IPG (1 << 6)
> -#define MX3_TCTL_FRR (1 << 9)
> -#define MX3_IR 0x0c
> -#define MX3_TSTAT 0x08
> -#define MX3_TSTAT_OF1 (1 << 0)
> -#define MX3_TCN 0x24
> -#define MX3_TCMP 0x10
> +#define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */
> +#define V2_TCTL_CLK_IPG (1 << 6)
> +#define V2_TCTL_FRR (1 << 9)
> +#define V2_IR 0x0c
> +#define V2_TSTAT 0x08
> +#define V2_TSTAT_OF1 (1 << 0)
> +#define V2_TCN 0x24
> +#define V2_TCMP 0x10
>
> #define timer_is_v1() (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
> #define timer_is_v2() (!timer_is_v1())
> @@ -76,7 +76,7 @@ static inline void gpt_irq_disable(void)
> unsigned int tmp;
>
> if (timer_is_v2())
> - __raw_writel(0, timer_base + MX3_IR);
> + __raw_writel(0, timer_base + V2_IR);
> else {
> tmp = __raw_readl(timer_base + MXC_TCTL);
> __raw_writel(tmp & ~MX1_2_TCTL_IRQEN, timer_base + MXC_TCTL);
> @@ -86,7 +86,7 @@ static inline void gpt_irq_disable(void)
> static inline void gpt_irq_enable(void)
> {
> if (timer_is_v2())
> - __raw_writel(1<<0, timer_base + MX3_IR);
> + __raw_writel(1<<0, timer_base + V2_IR);
> else {
> __raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
> timer_base + MXC_TCTL);
> @@ -110,9 +110,9 @@ static cycle_t mx1_2_get_cycles(struct clocksource *cs)
> return __raw_readl(timer_base + MX1_2_TCN);
> }
>
> -static cycle_t mx3_get_cycles(struct clocksource *cs)
> +static cycle_t v2_get_cycles(struct clocksource *cs)
> {
> - return __raw_readl(timer_base + MX3_TCN);
> + return __raw_readl(timer_base + V2_TCN);
> }
>
> static struct clocksource clocksource_mxc = {
> @@ -129,7 +129,7 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
> unsigned int c = clk_get_rate(timer_clk);
>
> if (timer_is_v2())
> - clocksource_mxc.read = mx3_get_cycles;
> + clocksource_mxc.read = v2_get_cycles;
>
> clocksource_mxc.mult = clocksource_hz2mult(c,
> clocksource_mxc.shift);
> @@ -153,16 +153,16 @@ static int mx1_2_set_next_event(unsigned long evt,
> -ETIME : 0;
> }
>
> -static int mx3_set_next_event(unsigned long evt,
> +static int v2_set_next_event(unsigned long evt,
> struct clock_event_device *unused)
> {
> unsigned long tcmp;
>
> - tcmp = __raw_readl(timer_base + MX3_TCN) + evt;
> + tcmp = __raw_readl(timer_base + V2_TCN) + evt;
>
> - __raw_writel(tcmp, timer_base + MX3_TCMP);
> + __raw_writel(tcmp, timer_base + V2_TCMP);
>
> - return (int)(tcmp - __raw_readl(timer_base + MX3_TCN)) < 0 ?
> + return (int)(tcmp - __raw_readl(timer_base + V2_TCN)) < 0 ?
> -ETIME : 0;
> }
>
> @@ -192,8 +192,8 @@ static void mxc_set_mode(enum clock_event_mode mode,
> if (mode != clockevent_mode) {
> /* Set event time into far-far future */
> if (timer_is_v2())
> - __raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
> - timer_base + MX3_TCMP);
> + __raw_writel(__raw_readl(timer_base + V2_TCN) - 3,
> + timer_base + V2_TCMP);
> else
> __raw_writel(__raw_readl(timer_base + MX1_2_TCN) - 3,
> timer_base + MX1_2_TCMP);
> @@ -245,7 +245,7 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
> uint32_t tstat;
>
> if (timer_is_v2())
> - tstat = __raw_readl(timer_base + MX3_TSTAT);
> + tstat = __raw_readl(timer_base + V2_TSTAT);
> else
> tstat = __raw_readl(timer_base + MX1_2_TSTAT);
>
> @@ -276,7 +276,7 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
> unsigned int c = clk_get_rate(timer_clk);
>
> if (timer_is_v2())
> - clockevent_mxc.set_next_event = mx3_set_next_event;
> + clockevent_mxc.set_next_event = v2_set_next_event;
>
> clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
> clockevent_mxc.shift);
> @@ -308,7 +308,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
> __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
>
> if (timer_is_v2())
> - tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
> + tctl_val = V2_TCTL_CLK_IPG | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
> else
> tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
>
> --
> 1.7.0.4
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-04-22 11:41 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-04-21 18:34 [PATCH] mxc: Change gpt timer code to be more generic by using V2 instead of MX3 Amit Kucheria
2010-04-22 11:41 ` Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).