From: anarsoul@gmail.com (Vasily Khoruzhick)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2.6.34-rc2] s3c: Adds support for banks H and J on S3C244X CPUs
Date: Fri, 23 Apr 2010 09:34:08 +0300 [thread overview]
Message-ID: <201004230934.14960.anarsoul@gmail.com> (raw)
In-Reply-To: <1269937367-7571-1-git-send-email-chripell@fsfe.org>
? ????????? ?? 30 ????? 2010 11:22:47 ????? Christian Pellegrin ???????:
> This patch adds support to gpiolib for GPIO bank J present on S3C244X
> CPUs.
>
> Signed-off-by: Christian Pellegrin <chripell@fsfe.org>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com>
> ---
> arch/arm/mach-s3c2410/include/mach/gpio-nrs.h | 4 ++++
> arch/arm/mach-s3c2410/include/mach/gpio.h | 8 ++++++++
> arch/arm/plat-s3c24xx/gpiolib.c | 16 +++++++++++++++-
> 3 files changed, 27 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
> b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h index 2edbb9c..f1f32e2
> 100644
> --- a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
> +++ b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
> @@ -24,6 +24,7 @@
> #define S3C2410_GPIO_BANKF (32*5)
> #define S3C2410_GPIO_BANKG (32*6)
> #define S3C2410_GPIO_BANKH (32*7)
> +#define S3C2410_GPIO_BANKJ (32*8)
>
> /* GPIO bank sizes */
> #define S3C2410_GPIO_A_NR (32)
> @@ -34,6 +35,7 @@
> #define S3C2410_GPIO_F_NR (32)
> #define S3C2410_GPIO_G_NR (32)
> #define S3C2410_GPIO_H_NR (32)
> +#define S3C2410_GPIO_J_NR (32)
>
> #if CONFIG_S3C_GPIO_SPACE != 0
> #error CONFIG_S3C_GPIO_SPACE cannot be zero at the moment
> @@ -53,6 +55,7 @@ enum s3c_gpio_number {
> S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
> S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
> S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
> + S3C2410_GPIO_J_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_H),
> };
>
> #endif /* __ASSEMBLY__ */
> @@ -67,6 +70,7 @@ enum s3c_gpio_number {
> #define S3C2410_GPF(_nr) (S3C2410_GPIO_F_START + (_nr))
> #define S3C2410_GPG(_nr) (S3C2410_GPIO_G_START + (_nr))
> #define S3C2410_GPH(_nr) (S3C2410_GPIO_H_START + (_nr))
> +#define S3C2410_GPJ(_nr) (S3C2410_GPIO_J_START + (_nr))
>
> /* compatibility until drivers can be modified */
>
> diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h
> b/arch/arm/mach-s3c2410/include/mach/gpio.h index 15f0b3e..1528fc7 100644
> --- a/arch/arm/mach-s3c2410/include/mach/gpio.h
> +++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
> @@ -20,10 +20,18 @@
> * devices that need GPIO.
> */
>
> +#ifdef CONFIG_CPU_S3C244X
> +#define ARCH_NR_GPIOS (32 * 9 + CONFIG_S3C24XX_GPIO_EXTRA)
> +#else
> #define ARCH_NR_GPIOS (256 + CONFIG_S3C24XX_GPIO_EXTRA)
> +#endif
>
> #include <asm-generic/gpio.h>
> #include <mach/gpio-nrs.h>
> #include <mach/gpio-fns.h>
>
> +#ifdef CONFIG_CPU_S3C244X
> +#define S3C_GPIO_END (S3C2410_GPIO_BANKJ + 32)
> +#else
> #define S3C_GPIO_END (S3C2410_GPIO_BANKH + 32)
> +#endif
> diff --git a/arch/arm/plat-s3c24xx/gpiolib.c
> b/arch/arm/plat-s3c24xx/gpiolib.c index 4f0f11a..0818a6e 100644
> --- a/arch/arm/plat-s3c24xx/gpiolib.c
> +++ b/arch/arm/plat-s3c24xx/gpiolib.c
> @@ -26,6 +26,7 @@
> #include <plat/pm.h>
>
> #include <mach/regs-gpio.h>
> +#include <mach/regs-gpioj.h>
>
> static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned
> offset) {
> @@ -151,7 +152,8 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
> .ngpio = 16,
> .to_irq = s3c24xx_gpiolib_bankg_toirq,
> },
> - }, {
> + },
> + [7] = {
> .base = S3C2410_GPHCON,
> .pm = __gpio_pm(&s3c_gpio_pm_2bit),
> .chip = {
> @@ -161,6 +163,18 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
> .ngpio = 11,
> },
> },
> +#ifdef CONFIG_CPU_S3C244X
> + [8] = {
> + .base = S3C2440_GPJCON,
> + .pm = __gpio_pm(&s3c_gpio_pm_2bit),
> + .chip = {
> + .base = S3C2410_GPJ(0),
> + .owner = THIS_MODULE,
> + .label = "GPIOJ",
> + .ngpio = 13,
> + },
> + },
> +#endif
> };
>
> static __init int s3c24xx_gpiolib_init(void)
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20100423/c9397c9c/attachment.sig>
prev parent reply other threads:[~2010-04-23 6:34 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-30 8:22 [PATCH v2.6.34-rc2] s3c: Adds support for banks H and J on S3C244X CPUs Christian Pellegrin
2010-04-23 6:34 ` Vasily Khoruzhick [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201004230934.14960.anarsoul@gmail.com \
--to=anarsoul@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).