* [PATCH] ARM: S5PC100: Modified the clock code to conform to Samsung clock API.
@ 2010-05-13 1:10 Kukjin Kim
2010-05-13 1:32 ` Ben Dooks
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Kukjin Kim @ 2010-05-13 1:10 UTC (permalink / raw)
To: linux-arm-kernel
From: Thomas Abraham <thomas.ab@samsung.com>
Re-worked the existing clock code for Samsung's S5PC100 SoC to be in
sync with new clock API.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-s5pc100/Makefile | 2 +-
arch/arm/mach-s5pc100/clock.c | 1368 +++++++++++++++++++++++
arch/arm/mach-s5pc100/include/mach/regs-clock.h | 71 ++
arch/arm/plat-s5p/clock.c | 2 +-
arch/arm/plat-s5p/include/plat/pll.h | 22 +
arch/arm/plat-s5p/include/plat/s5p-clock.h | 2 +
6 files changed, 1465 insertions(+), 2 deletions(-)
create mode 100755 arch/arm/mach-s5pc100/clock.c
create mode 100644 arch/arm/mach-s5pc100/include/mach/regs-clock.h
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
index 809ff10..8540509 100644
--- a/arch/arm/mach-s5pc100/Makefile
+++ b/arch/arm/mach-s5pc100/Makefile
@@ -11,7 +11,7 @@ obj- :=
# Core support for S5PC100 system
-obj-$(CONFIG_CPU_S5PC100) += cpu.o
+obj-$(CONFIG_CPU_S5PC100) += cpu.o clock.o
# Helper and device support
diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
new file mode 100755
index 0000000..fac8ff0
--- /dev/null
+++ b/arch/arm/mach-s5pc100/clock.c
@@ -0,0 +1,1368 @@
+/* linux/arch/arm/mach-s5pc100/clock.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PC100 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+#include <mach/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5pc100.h>
+
+static struct clk s5p_clk_xusbxti = {
+ .name = "xusb_xti",
+ .id = -1,
+};
+
+static struct clk s5p_clk_otgphy = {
+ .name = "otg_phy",
+ .id = -1,
+};
+
+static struct clk *clk_src_mout_href_list[] = {
+ [0] = &s5p_clk_27m,
+ [1] = &clk_fin_hpll,
+};
+
+static struct clksrc_sources clk_src_mout_href = {
+ .sources = clk_src_mout_href_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mout_href_list),
+};
+
+static struct clksrc_clk clk_mout_href = {
+ .clk = {
+ .name = "mout_href",
+ .id = -1,
+ },
+ .sources = &clk_src_mout_href,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 1 },
+};
+
+static struct clk *clk_src_mout_48m_list[] = {
+ [0] = &s5p_clk_xusbxti,
+ [1] = &s5p_clk_otgphy,
+};
+
+static struct clksrc_sources clk_src_mout_48m = {
+ .sources = clk_src_mout_48m_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mout_48m_list),
+};
+
+static struct clksrc_clk clk_mout_48m = {
+ .clk = {
+ .name = "mout_48m",
+ .id = -1,
+ },
+ .sources = &clk_src_mout_48m,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 24, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+ .clk = {
+ .name = "mout_mpll",
+ .id = -1,
+ },
+ .sources = &clk_src_mpll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
+};
+
+
+static struct clksrc_clk clk_mout_apll = {
+ .clk = {
+ .name = "mout_apll",
+ .id = -1,
+ },
+ .sources = &clk_src_apll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_epll = {
+ .clk = {
+ .name = "mout_epll",
+ .id = -1,
+ },
+ .sources = &clk_src_epll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
+};
+
+static struct clk *clk_src_mout_hpll_list[] = {
+ [0] = &s5p_clk_27m,
+};
+
+static struct clksrc_sources clk_src_mout_hpll = {
+ .sources = clk_src_mout_hpll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mout_hpll_list),
+};
+
+static struct clksrc_clk clk_mout_hpll = {
+ .clk = {
+ .name = "mout_hpll",
+ .id = -1,
+ },
+ .sources = &clk_src_mout_hpll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 12, .size = 1 },
+};
+
+static struct clksrc_clk clk_div_apll = {
+ .clk = {
+ .name = "div_apll",
+ .id = -1,
+ .parent = &clk_mout_apll.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk clk_div_arm = {
+ .clk = {
+ .name = "div_arm",
+ .id = -1,
+ .parent = &clk_div_apll.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_d0_bus = {
+ .clk = {
+ .name = "div_d0_bus",
+ .id = -1,
+ .parent = &clk_div_arm.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 8, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_pclkd0 = {
+ .clk = {
+ .name = "div_pclkd0",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_secss = {
+ .clk = {
+ .name = "div_secss",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_apll2 = {
+ .clk = {
+ .name = "div_apll2",
+ .id = -1,
+ .parent = &clk_mout_apll.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 3 },
+};
+
+static struct clk *clk_src_mout_am_list[] = {
+ [0] = &clk_mout_mpll.clk,
+ [1] = &clk_div_apll2.clk,
+};
+
+struct clksrc_sources clk_src_mout_am = {
+ .sources = clk_src_mout_am_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mout_am_list),
+};
+
+static struct clksrc_clk clk_mout_am = {
+ .clk = {
+ .name = "mout_am",
+ .id = -1,
+ },
+ .sources = &clk_src_mout_am,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 1 },
+};
+
+static struct clksrc_clk clk_div_d1_bus = {
+ .clk = {
+ .name = "div_d1_bus",
+ .id = -1,
+ .parent = &clk_mout_am.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_mpll2 = {
+ .clk = {
+ .name = "div_mpll2",
+ .id = -1,
+ .parent = &clk_mout_am.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 1 },
+};
+
+static struct clksrc_clk clk_div_mpll = {
+ .clk = {
+ .name = "div_mpll",
+ .id = -1,
+ .parent = &clk_mout_am.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 2 },
+};
+
+static struct clk *clk_src_mout_onenand_list[] = {
+ [0] = &clk_div_d0_bus.clk,
+ [1] = &clk_div_d1_bus.clk,
+};
+
+struct clksrc_sources clk_src_mout_onenand = {
+ .sources = clk_src_mout_onenand_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mout_onenand_list),
+};
+
+static struct clksrc_clk clk_mout_onenand = {
+ .clk = {
+ .name = "mout_onenand",
+ .id = -1,
+ },
+ .sources = &clk_src_mout_onenand,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 24, .size = 1 },
+};
+
+static struct clksrc_clk clk_div_onenand = {
+ .clk = {
+ .name = "div_onenand",
+ .id = -1,
+ .parent = &clk_mout_onenand.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 20, .size = 2 },
+};
+
+static struct clksrc_clk clk_div_pclkd1 = {
+ .clk = {
+ .name = "div_pclkd1",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 16, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_cam = {
+ .clk = {
+ .name = "div_cam",
+ .id = -1,
+ .parent = &clk_div_mpll2.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 24, .size = 5 },
+};
+
+static struct clksrc_clk clk_div_hdmi = {
+ .clk = {
+ .name = "div_hdmi",
+ .id = -1,
+ .parent = &clk_mout_hpll.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 28, .size = 4 },
+};
+
+static int s5pc100_epll_enable(struct clk *clk, int enable)
+{
+ unsigned int ctrlbit = clk->ctrlbit;
+ unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit;
+
+ if (enable)
+ __raw_writel(epll_con | ctrlbit, S5P_EPLL_CON);
+ else
+ __raw_writel(epll_con, S5P_EPLL_CON);
+
+ return 0;
+}
+
+static unsigned long s5pc100_epll_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+
+static u32 epll_div[][4] = {
+ { 32750000, 131, 3, 4 },
+ { 32768000, 131, 3, 4 },
+ { 36000000, 72, 3, 3 },
+ { 45000000, 90, 3, 3 },
+ { 45158000, 90, 3, 3 },
+ { 45158400, 90, 3, 3 },
+ { 48000000, 96, 3, 3 },
+ { 49125000, 131, 4, 3 },
+ { 49152000, 131, 4, 3 },
+ { 60000000, 120, 3, 3 },
+ { 67737600, 226, 5, 3 },
+ { 67738000, 226, 5, 3 },
+ { 73800000, 246, 5, 3 },
+ { 73728000, 246, 5, 3 },
+ { 72000000, 144, 3, 3 },
+ { 84000000, 168, 3, 3 },
+ { 96000000, 96, 3, 2 },
+ { 144000000, 144, 3, 2 },
+ { 192000000, 96, 3, 1 }
+};
+
+static int s5pc100_epll_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned int epll_con;
+ unsigned int i;
+
+ if (clk->rate == rate) /* Return if nothing changed */
+ return 0;
+
+ epll_con = __raw_readl(S5P_EPLL_CON);
+
+ epll_con &= ~(PLL65XX_MDIV_MASK | PLL65XX_PDIV_MASK | PLL65XX_SDIV_MASK);
+
+ for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
+ if (epll_div[i][0] == rate) {
+ epll_con |= (epll_div[i][1] << PLL65XX_MDIV_SHIFT) |
+ (epll_div[i][2] << PLL65XX_PDIV_SHIFT) |
+ (epll_div[i][3] << PLL65XX_SDIV_SHIFT);
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(epll_div)) {
+ printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
+ return -EINVAL;
+ }
+
+ __raw_writel(epll_con, S5P_EPLL_CON);
+
+ clk->rate = rate;
+
+ return 0;
+}
+
+static struct clk_ops s5pc100_epll_ops = {
+ .get_rate = s5pc100_epll_get_rate,
+ .set_rate = s5pc100_epll_set_rate,
+};
+
+static int s5pc100_d0_0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_D00, clk, enable);
+}
+
+static int s5pc100_d0_1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_D01, clk, enable);
+}
+
+static int s5pc100_d0_2_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_D02, clk, enable);
+}
+
+static int s5pc100_d1_0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_D10, clk, enable);
+}
+
+static int s5pc100_d1_1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_D11, clk, enable);
+}
+
+static int s5pc100_d1_2_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_D12, clk, enable);
+}
+
+static int s5pc100_d1_3_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_D13, clk, enable);
+}
+
+static int s5pc100_d1_4_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_D14, clk, enable);
+}
+
+static int s5pc100_d1_5_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_D15, clk, enable);
+}
+
+static int s5pc100_d2_0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_D20, clk, enable);
+}
+
+static int s5pc100_sclk0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_SCLK0, clk, enable);
+}
+
+static int s5pc100_sclk1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_SCLK1, clk, enable);
+}
+
+/*
+ * The following clocks will be disabled during clock initialization. It is
+ * recommended to keep the following clocks disabled until the driver requests
+ * for enabling the clock.
+ */
+static struct clk init_clocks_disable[] = {
+ {
+ .name = "cssys",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_0_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "secss",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_0_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "g2d",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_0_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "mdma",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_0_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "cfcon",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_0_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "nfcon",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_1_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "onenandc",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_1_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "sdm",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_2_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "seckey",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_2_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "hsmmc",
+ .id = 2,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "hsmmc",
+ .id = 1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "hsmmc",
+ .id = 0,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "modemif",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "usbotg",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "usbhost",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "pdma",
+ .id = 1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "pdma",
+ .id = 0,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "fimd",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_1_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "rotator",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_1_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "fimc",
+ .id = 0,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_1_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "fimc",
+ .id = 1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_1_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "fimc",
+ .id = 2,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_1_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "jpeg",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_1_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "mipi-dsim",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_1_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "mipi-csis",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_1_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "g3d",
+ .id = 0,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "tv",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_2_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "vp",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_2_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "mixer",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_2_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "hdmi",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_2_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "mfc",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_2_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "apc",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_3_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "iec",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_3_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "systimer",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_3_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "watchdog",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_3_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "rtc",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_3_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = "i2c",
+ .id = 0,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "i2c",
+ .id = 1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "spi",
+ .id = 0,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "spi",
+ .id = 1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "spi",
+ .id = 2,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "irda",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = "ccan",
+ .id = 0,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = "ccan",
+ .id = 1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 11),
+ }, {
+ .name = "hsitx",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 12),
+ }, {
+ .name = "hsirx",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 13),
+ }, {
+ .name = "iis",
+ .id = 0,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_5_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "iis",
+ .id = 1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_5_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "iis",
+ .id = 2,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_5_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "ac97",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_5_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "pcm",
+ .id = 0,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_5_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "pcm",
+ .id = 1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_5_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "spdif",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_5_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "adc",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_5_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "keyif",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_5_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "spi_48m",
+ .id = 0,
+ .parent = &clk_mout_48m.clk,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "spi_48m",
+ .id = 1,
+ .parent = &clk_mout_48m.clk,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "spi_48m",
+ .id = 2,
+ .parent = &clk_mout_48m.clk,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = "mmc_48m",
+ .id = 0,
+ .parent = &clk_mout_48m.clk,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = (1 << 15),
+ }, {
+ .name = "mmc_48m",
+ .id = 1,
+ .parent = &clk_mout_48m.clk,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = (1 << 16),
+ }, {
+ .name = "mmc_48m",
+ .id = 2,
+ .parent = &clk_mout_48m.clk,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = (1 << 17),
+ },
+};
+
+static struct clk clk_vclk54m = {
+ .name = "vclk_54m",
+ .id = -1,
+ .rate = 54000000,
+};
+
+static struct clk clk_i2scdclk0 = {
+ .name = "i2s_cdclk0",
+ .id = -1,
+};
+
+static struct clk clk_i2scdclk1 = {
+ .name = "i2s_cdclk1",
+ .id = -1,
+};
+
+static struct clk clk_i2scdclk2 = {
+ .name = "i2s_cdclk2",
+ .id = -1,
+};
+
+static struct clk clk_pcmcdclk0 = {
+ .name = "pcm_cdclk0",
+ .id = -1,
+};
+
+static struct clk clk_pcmcdclk1 = {
+ .name = "pcm_cdclk1",
+ .id = -1,
+};
+
+static struct clk *clk_src_group1_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_div_mpll2.clk,
+ [2] = &clk_fin_epll,
+ [3] = &clk_mout_hpll.clk,
+};
+
+struct clksrc_sources clk_src_group1 = {
+ .sources = clk_src_group1_list,
+ .nr_sources = ARRAY_SIZE(clk_src_group1_list),
+};
+
+static struct clk *clk_src_group2_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_div_mpll.clk,
+};
+
+struct clksrc_sources clk_src_group2 = {
+ .sources = clk_src_group2_list,
+ .nr_sources = ARRAY_SIZE(clk_src_group2_list),
+};
+
+static struct clk *clk_src_group3_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_div_mpll.clk,
+ [2] = &clk_fin_epll,
+ [3] = &clk_i2scdclk0,
+ [4] = &clk_pcmcdclk0,
+ [5] = &clk_mout_hpll.clk,
+};
+
+struct clksrc_sources clk_src_group3 = {
+ .sources = clk_src_group3_list,
+ .nr_sources = ARRAY_SIZE(clk_src_group3_list),
+};
+
+static struct clk *clk_src_group4_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_div_mpll.clk,
+ [2] = &clk_fin_epll,
+ [3] = &clk_i2scdclk1,
+ [4] = &clk_pcmcdclk1,
+ [5] = &clk_mout_hpll.clk,
+};
+
+struct clksrc_sources clk_src_group4 = {
+ .sources = clk_src_group4_list,
+ .nr_sources = ARRAY_SIZE(clk_src_group4_list),
+};
+
+static struct clk *clk_src_group5_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_div_mpll.clk,
+ [2] = &clk_fin_epll,
+ [3] = &clk_i2scdclk2,
+ [4] = &clk_mout_hpll.clk,
+};
+
+struct clksrc_sources clk_src_group5 = {
+ .sources = clk_src_group5_list,
+ .nr_sources = ARRAY_SIZE(clk_src_group5_list),
+};
+
+static struct clk *clk_src_group6_list[] = {
+ [0] = &s5p_clk_27m,
+ [1] = &clk_vclk54m,
+ [2] = &clk_div_hdmi.clk,
+};
+
+struct clksrc_sources clk_src_group6 = {
+ .sources = clk_src_group6_list,
+ .nr_sources = ARRAY_SIZE(clk_src_group6_list),
+};
+
+static struct clk *clk_src_group7_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_div_mpll.clk,
+ [2] = &clk_mout_hpll.clk,
+ [3] = &clk_vclk54m,
+};
+
+struct clksrc_sources clk_src_group7 = {
+ .sources = clk_src_group7_list,
+ .nr_sources = ARRAY_SIZE(clk_src_group7_list),
+};
+
+static struct clk *clk_src_mmc0_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_div_mpll.clk,
+ [2] = &clk_fin_epll,
+};
+
+struct clksrc_sources clk_src_mmc0 = {
+ .sources = clk_src_mmc0_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mmc0_list),
+};
+
+static struct clk *clk_src_mmc12_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_div_mpll.clk,
+ [2] = &clk_fin_epll,
+ [3] = &clk_mout_hpll.clk,
+};
+
+struct clksrc_sources clk_src_mmc12 = {
+ .sources = clk_src_mmc12_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mmc12_list),
+};
+
+static struct clk *clk_src_irda_usb_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_div_mpll.clk,
+ [2] = &clk_fin_epll,
+ [3] = &clk_mout_hpll.clk,
+};
+
+struct clksrc_sources clk_src_irda_usb = {
+ .sources = clk_src_irda_usb_list,
+ .nr_sources = ARRAY_SIZE(clk_src_irda_usb_list),
+};
+
+static struct clk *clk_src_pwi_list[] = {
+ [0] = &clk_fin_epll,
+ [1] = &clk_mout_epll.clk,
+ [2] = &clk_div_mpll.clk,
+};
+
+struct clksrc_sources clk_src_pwi = {
+ .sources = clk_src_pwi_list,
+ .nr_sources = ARRAY_SIZE(clk_src_pwi_list),
+};
+
+static struct clksrc_clk clksrcs[] = {
+ {
+ .clk = {
+ .name = "sclk_spi",
+ .id = 0,
+ .ctrlbit = (1 << 4),
+ .enable = s5pc100_sclk0_ctrl,
+
+ },
+ .sources = &clk_src_group1,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_spi",
+ .id = 1,
+ .ctrlbit = (1 << 5),
+ .enable = s5pc100_sclk0_ctrl,
+
+ },
+ .sources = &clk_src_group1,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 8, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_spi",
+ .id = 2,
+ .ctrlbit = (1 << 6),
+ .enable = s5pc100_sclk0_ctrl,
+
+ },
+ .sources = &clk_src_group1,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 12, .size = 4 },
+ }, {
+ .clk = {
+ .name = "uclk1",
+ .id = -1,
+ .ctrlbit = (1 << 3),
+ .enable = s5pc100_sclk0_ctrl,
+
+ },
+ .sources = &clk_src_group2,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_mixer",
+ .id = -1,
+ .ctrlbit = (1 << 6),
+ .enable = s5pc100_sclk0_ctrl,
+
+ },
+ .sources = &clk_src_group6,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 28, .size = 2 },
+ }, {
+ .clk = {
+ .name = "sclk_audio",
+ .id = 0,
+ .ctrlbit = (1 << 8),
+ .enable = s5pc100_sclk1_ctrl,
+
+ },
+ .sources = &clk_src_group3,
+ .reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 3 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_audio",
+ .id = 1,
+ .ctrlbit = (1 << 9),
+ .enable = s5pc100_sclk1_ctrl,
+
+ },
+ .sources = &clk_src_group4,
+ .reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 3 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_audio",
+ .id = 2,
+ .ctrlbit = (1 << 10),
+ .enable = s5pc100_sclk1_ctrl,
+
+ },
+ .sources = &clk_src_group5,
+ .reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 3 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_lcd",
+ .id = -1,
+ .ctrlbit = (1 << 0),
+ .enable = s5pc100_sclk1_ctrl,
+
+ },
+ .sources = &clk_src_group7,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 12, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 12, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .id = 0,
+ .ctrlbit = (1 << 1),
+ .enable = s5pc100_sclk1_ctrl,
+
+ },
+ .sources = &clk_src_group7,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 16, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 16, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .id = 1,
+ .ctrlbit = (1 << 2),
+ .enable = s5pc100_sclk1_ctrl,
+
+ },
+ .sources = &clk_src_group7,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 20, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .id = 2,
+ .ctrlbit = (1 << 3),
+ .enable = s5pc100_sclk1_ctrl,
+
+ },
+ .sources = &clk_src_group7,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 24, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 24, .size = 4 },
+ }, {
+ .clk = {
+ .name = "mmc_bus",
+ .id = 0,
+ .ctrlbit = (1 << 12),
+ .enable = s5pc100_sclk1_ctrl,
+
+ },
+ .sources = &clk_src_mmc0,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 0, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "mmc_bus",
+ .id = 1,
+ .ctrlbit = (1 << 13),
+ .enable = s5pc100_sclk1_ctrl,
+
+ },
+ .sources = &clk_src_mmc12,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 4, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 },
+ }, {
+ .clk = {
+ .name = "mmc_bus",
+ .id = 2,
+ .ctrlbit = (1 << 14),
+ .enable = s5pc100_sclk1_ctrl,
+
+ },
+ .sources = &clk_src_mmc12,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_irda",
+ .id = 2,
+ .ctrlbit = (1 << 10),
+ .enable = s5pc100_sclk0_ctrl,
+
+ },
+ .sources = &clk_src_irda_usb,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_irda",
+ .id = -1,
+ .ctrlbit = (1 << 10),
+ .enable = s5pc100_sclk0_ctrl,
+
+ },
+ .sources = &clk_src_mmc12,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 16, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 16, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_pwi",
+ .id = -1,
+ .ctrlbit = (1 << 1),
+ .enable = s5pc100_sclk0_ctrl,
+
+ },
+ .sources = &clk_src_pwi,
+ .reg_src = { .reg = S5P_CLK_SRC3, .shift = 0, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 0, .size = 3 },
+ }, {
+ .clk = {
+ .name = "sclk_uhost",
+ .id = -1,
+ .ctrlbit = (1 << 11),
+ .enable = s5pc100_sclk0_ctrl,
+
+ },
+ .sources = &clk_src_irda_usb,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 20, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 20, .size = 4 },
+ },
+};
+
+
+/* Clock initialisation code */
+static struct clksrc_clk *sysclks[] = {
+ &clk_mout_apll,
+ &clk_mout_epll,
+ &clk_mout_mpll,
+ &clk_mout_hpll,
+ &clk_mout_48m,
+ &clk_div_apll,
+ &clk_div_arm,
+ &clk_div_d0_bus,
+ &clk_div_pclkd0,
+ &clk_div_secss,
+ &clk_div_apll2,
+ &clk_mout_am,
+ &clk_div_d1_bus,
+ &clk_div_mpll2,
+ &clk_div_mpll,
+ &clk_mout_onenand,
+ &clk_div_onenand,
+ &clk_div_pclkd1,
+ &clk_div_cam,
+ &clk_div_hdmi,
+};
+
+void __init_or_cpufreq s5pc100_setup_clocks(void)
+{
+ unsigned long xtal;
+ unsigned long arm;
+ unsigned long hclkd0;
+ unsigned long hclkd1;
+ unsigned long pclkd0;
+ unsigned long pclkd1;
+ unsigned long apll;
+ unsigned long mpll;
+ unsigned long epll;
+ unsigned long hpll;
+ unsigned int ptr;
+
+ /* Set S5PC100 functions for clk_fout_epll */
+ clk_fout_epll.enable = s5pc100_epll_enable;
+ clk_fout_epll.ops = &s5pc100_epll_ops;
+
+ printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+ xtal = clk_get_rate(&clk_xtal);
+
+ printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+ apll = s5p_get_pll65xx(xtal, __raw_readl(S5P_APLL_CON));
+ mpll = s5p_get_pll65xx(xtal, __raw_readl(S5P_MPLL_CON));
+ epll = s5p_get_pll65xx(xtal, __raw_readl(S5P_EPLL_CON));
+ hpll = s5p_get_pll65xx(xtal, __raw_readl(S5P_HPLL_CON));
+
+ printk(KERN_INFO "S5PC100: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz, E=%ld.%ldMHz, H=%ld.%ldMHz\n",
+ print_mhz(apll), print_mhz(mpll), print_mhz(epll), print_mhz(hpll));
+
+ clk_fout_apll.rate = apll;
+ clk_fout_mpll.rate = mpll;
+ clk_fout_epll.rate = epll;
+ clk_mout_hpll.clk.rate = hpll;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+ s3c_set_clksrc(&clksrcs[ptr], true);
+
+ arm = clk_get_rate(&clk_div_arm.clk);
+ hclkd0 = clk_get_rate(&clk_div_d0_bus.clk);
+ pclkd0 = clk_get_rate(&clk_div_pclkd0.clk);
+ hclkd1 = clk_get_rate(&clk_div_d1_bus.clk);
+ pclkd1 = clk_get_rate(&clk_div_pclkd1.clk);
+
+ printk(KERN_INFO "S5PC100: HCLKD0=%ld.%ldMHz, HCLKD1=%ld.%ldMHz, PCLKD0=%ld.%ldMHz, PCLKD1=%ld.%ldMHz\n",
+ print_mhz(hclkd0), print_mhz(hclkd1), print_mhz(pclkd0), print_mhz(pclkd1));
+
+ clk_f.rate = arm;
+ clk_h.rate = hclkd1;
+ clk_p.rate = pclkd1;
+}
+
+/*
+ * The following clocks will be enabled during clock initialization.
+ */
+static struct clk init_clocks[] = {
+ {
+ .name = "tzic",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_0_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "intc",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_0_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "ebi",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_1_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "intmem",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_1_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "sromc",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_1_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "dmc",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_1_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "chipid",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_1_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "gpio",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_3_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "uart",
+ .id = 0,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "uart",
+ .id = 1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "uart",
+ .id = 2,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "uart",
+ .id = 3,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "timers",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_3_ctrl,
+ .ctrlbit = (1 << 6),
+ },
+};
+
+static struct clk *clks[] __initdata = {
+ &clk_ext,
+ &clk_i2scdclk0,
+ &clk_i2scdclk1,
+ &clk_i2scdclk2,
+ &clk_pcmcdclk0,
+ &clk_pcmcdclk1,
+};
+
+void __init s5pc100_register_clocks(void)
+{
+ struct clk *clkp;
+ int ret;
+ int ptr;
+
+ s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+ for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+ s3c_register_clksrc(sysclks[ptr], 1);
+
+ s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+ s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+ clkp = init_clocks_disable;
+ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+ (clkp->enable)(clkp, 0);
+ }
+
+ s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-clock.h b/arch/arm/mach-s5pc100/include/mach/regs-clock.h
new file mode 100644
index 0000000..f2283bd
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/regs-clock.h
@@ -0,0 +1,71 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PC100 - Clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_CLKREG(x) (S3C_VA_SYS + (x))
+
+#define S5P_APLL_LOCK S5P_CLKREG(0x00)
+#define S5P_MPLL_LOCK S5P_CLKREG(0x04)
+#define S5P_EPLL_LOCK S5P_CLKREG(0x08)
+#define S5P_HPLL_LOCK S5P_CLKREG(0x0C)
+
+#define S5P_APLL_CON S5P_CLKREG(0x100)
+#define S5P_MPLL_CON S5P_CLKREG(0x104)
+#define S5P_EPLL_CON S5P_CLKREG(0x108)
+#define S5P_HPLL_CON S5P_CLKREG(0x10C)
+
+#define S5P_CLK_SRC0 S5P_CLKREG(0x200)
+#define S5P_CLK_SRC1 S5P_CLKREG(0x204)
+#define S5P_CLK_SRC2 S5P_CLKREG(0x208)
+#define S5P_CLK_SRC3 S5P_CLKREG(0x20C)
+
+#define S5P_CLK_DIV0 S5P_CLKREG(0x300)
+#define S5P_CLK_DIV1 S5P_CLKREG(0x304)
+#define S5P_CLK_DIV2 S5P_CLKREG(0x308)
+#define S5P_CLK_DIV3 S5P_CLKREG(0x30C)
+#define S5P_CLK_DIV4 S5P_CLKREG(0x310)
+
+#define S5P_CLK_OUT S5P_CLKREG(0x400)
+
+#define S5P_CLKGATE_D00 S5P_CLKREG(0x500)
+#define S5P_CLKGATE_D01 S5P_CLKREG(0x504)
+#define S5P_CLKGATE_D02 S5P_CLKREG(0x508)
+
+#define S5P_CLKGATE_D10 S5P_CLKREG(0x520)
+#define S5P_CLKGATE_D11 S5P_CLKREG(0x524)
+#define S5P_CLKGATE_D12 S5P_CLKREG(0x528)
+#define S5P_CLKGATE_D13 S5P_CLKREG(0x52C)
+#define S5P_CLKGATE_D14 S5P_CLKREG(0x530)
+#define S5P_CLKGATE_D15 S5P_CLKREG(0x534)
+
+#define S5P_CLKGATE_D20 S5P_CLKREG(0x540)
+
+#define S5P_CLKGATE_SCLK0 S5P_CLKREG(0x560)
+#define S5P_CLKGATE_SCLK1 S5P_CLKREG(0x564)
+
+/* CLKDIV0 */
+#define S5P_CLKDIV0_D0_MASK (0x7<<8)
+#define S5P_CLKDIV0_D0_SHIFT (8)
+#define S5P_CLKDIV0_PCLKD0_MASK (0x7<<12)
+#define S5P_CLKDIV0_PCLKD0_SHIFT (12)
+
+/* CLKDIV1 */
+#define S5P_CLKDIV1_D1_MASK (0x7<<12)
+#define S5P_CLKDIV1_D1_SHIFT (12)
+#define S5P_CLKDIV1_PCLKD1_MASK (0x7<<16)
+#define S5P_CLKDIV1_PCLKD1_SHIFT (16)
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c
index aa96e33..5cfa482 100644
--- a/arch/arm/plat-s5p/clock.c
+++ b/arch/arm/plat-s5p/clock.c
@@ -33,7 +33,7 @@ struct clk clk_ext_xtal_mux = {
.id = -1,
};
-static struct clk s5p_clk_27m = {
+struct clk s5p_clk_27m = {
.name = "clk_27m",
.id = -1,
.rate = 27000000,
diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h
index d48325b..7db3227 100644
--- a/arch/arm/plat-s5p/include/plat/pll.h
+++ b/arch/arm/plat-s5p/include/plat/pll.h
@@ -81,3 +81,25 @@ static inline unsigned long s5p_get_pll90xx(unsigned long baseclk,
return result;
}
+
+#define PLL65XX_MDIV_MASK (0x3FF)
+#define PLL65XX_PDIV_MASK (0x3F)
+#define PLL65XX_SDIV_MASK (0x7)
+#define PLL65XX_MDIV_SHIFT (16)
+#define PLL65XX_PDIV_SHIFT (8)
+#define PLL65XX_SDIV_SHIFT (0)
+
+static inline unsigned long s5p_get_pll65xx(unsigned long baseclk, u32 pll_con)
+{
+ u32 mdiv, pdiv, sdiv;
+ u64 fvco = baseclk;
+
+ mdiv = (pll_con >> PLL65XX_MDIV_SHIFT) & PLL65XX_MDIV_MASK;
+ pdiv = (pll_con >> PLL65XX_PDIV_SHIFT) & PLL65XX_PDIV_MASK;
+ sdiv = (pll_con >> PLL65XX_SDIV_SHIFT) & PLL65XX_SDIV_MASK;
+
+ fvco *= mdiv;
+ do_div(fvco, (pdiv << sdiv));
+
+ return (unsigned long)fvco;
+}
diff --git a/arch/arm/plat-s5p/include/plat/s5p-clock.h b/arch/arm/plat-s5p/include/plat/s5p-clock.h
index 56fb8b4..28fae4e 100644
--- a/arch/arm/plat-s5p/include/plat/s5p-clock.h
+++ b/arch/arm/plat-s5p/include/plat/s5p-clock.h
@@ -21,9 +21,11 @@
#define clk_fin_mpll clk_ext_xtal_mux
#define clk_fin_epll clk_ext_xtal_mux
#define clk_fin_vpll clk_ext_xtal_mux
+#define clk_fin_hpll clk_ext_xtal_mux
extern struct clk clk_ext_xtal_mux;
extern struct clk clk_48m;
+extern struct clk s5p_clk_27m;
extern struct clk clk_fout_apll;
extern struct clk clk_fout_mpll;
extern struct clk clk_fout_epll;
--
1.6.6.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH] ARM: S5PC100: Modified the clock code to conform to Samsung clock API.
2010-05-13 1:10 [PATCH] ARM: S5PC100: Modified the clock code to conform to Samsung clock API Kukjin Kim
@ 2010-05-13 1:32 ` Ben Dooks
2010-05-13 6:47 ` Marek Szyprowski
2010-05-13 9:16 ` Marek Szyprowski
2 siblings, 0 replies; 5+ messages in thread
From: Ben Dooks @ 2010-05-13 1:32 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, May 13, 2010 at 10:10:01AM +0900, Kukjin Kim wrote:
> From: Thomas Abraham <thomas.ab@samsung.com>
>
> Re-worked the existing clock code for Samsung's S5PC100 SoC to be in
> sync with new clock API.
>
> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
> ---
> arch/arm/mach-s5pc100/Makefile | 2 +-
> arch/arm/mach-s5pc100/clock.c | 1368 +++++++++++++++++++++++
> arch/arm/mach-s5pc100/include/mach/regs-clock.h | 71 ++
> arch/arm/plat-s5p/clock.c | 2 +-
> arch/arm/plat-s5p/include/plat/pll.h | 22 +
> arch/arm/plat-s5p/include/plat/s5p-clock.h | 2 +
> 6 files changed, 1465 insertions(+), 2 deletions(-)
> create mode 100755 arch/arm/mach-s5pc100/clock.c
> create mode 100644 arch/arm/mach-s5pc100/include/mach/regs-clock.h
>
> diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
> index 809ff10..8540509 100644
> --- a/arch/arm/mach-s5pc100/Makefile
> +++ b/arch/arm/mach-s5pc100/Makefile
> @@ -11,7 +11,7 @@ obj- :=
>
> # Core support for S5PC100 system
>
> -obj-$(CONFIG_CPU_S5PC100) += cpu.o
> +obj-$(CONFIG_CPU_S5PC100) += cpu.o clock.o
>
> # Helper and device support
>
> diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
> new file mode 100755
> index 0000000..fac8ff0
> --- /dev/null
> +++ b/arch/arm/mach-s5pc100/clock.c
> @@ -0,0 +1,1368 @@
> +/* linux/arch/arm/mach-s5pc100/clock.c
> + *
> + * Copyright (c) 2010 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com/
> + *
> + * S5PC100 - Clock support
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/list.h>
> +#include <linux/err.h>
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +
> +#include <mach/map.h>
> +
> +#include <plat/cpu-freq.h>
> +#include <mach/regs-clock.h>
> +#include <plat/clock.h>
> +#include <plat/cpu.h>
> +#include <plat/pll.h>
> +#include <plat/s5p-clock.h>
> +#include <plat/clock-clksrc.h>
> +#include <plat/s5pc100.h>
> +
> +static struct clk s5p_clk_xusbxti = {
> + .name = "xusb_xti",
> + .id = -1,
> +};
didn't we add this elsewhere already?
> +static struct clk s5p_clk_otgphy = {
> + .name = "otg_phy",
> + .id = -1,
> +};
> +
> +static struct clk *clk_src_mout_href_list[] = {
> + [0] = &s5p_clk_27m,
> + [1] = &clk_fin_hpll,
> +};
> +
> +static struct clksrc_sources clk_src_mout_href = {
> + .sources = clk_src_mout_href_list,
> + .nr_sources = ARRAY_SIZE(clk_src_mout_href_list),
> +};
> +
> +static struct clksrc_clk clk_mout_href = {
> + .clk = {
> + .name = "mout_href",
> + .id = -1,
> + },
> + .sources = &clk_src_mout_href,
> + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 1 },
> +};
> +
> +static struct clk *clk_src_mout_48m_list[] = {
> + [0] = &s5p_clk_xusbxti,
> + [1] = &s5p_clk_otgphy,
> +};
> +
> +static struct clksrc_sources clk_src_mout_48m = {
> + .sources = clk_src_mout_48m_list,
> + .nr_sources = ARRAY_SIZE(clk_src_mout_48m_list),
> +};
> +
> +static struct clksrc_clk clk_mout_48m = {
> + .clk = {
> + .name = "mout_48m",
> + .id = -1,
> + },
> + .sources = &clk_src_mout_48m,
> + .reg_src = { .reg = S5P_CLK_SRC1, .shift = 24, .size = 1 },
> +};
> +
> +static struct clksrc_clk clk_mout_mpll = {
> + .clk = {
> + .name = "mout_mpll",
> + .id = -1,
> + },
> + .sources = &clk_src_mpll,
> + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
> +};
> +
> +
> +static struct clksrc_clk clk_mout_apll = {
> + .clk = {
> + .name = "mout_apll",
> + .id = -1,
> + },
> + .sources = &clk_src_apll,
> + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
> +};
> +
> +static struct clksrc_clk clk_mout_epll = {
> + .clk = {
> + .name = "mout_epll",
> + .id = -1,
> + },
> + .sources = &clk_src_epll,
> + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
> +};
> +
> +static struct clk *clk_src_mout_hpll_list[] = {
> + [0] = &s5p_clk_27m,
> +};
> +
> +static struct clksrc_sources clk_src_mout_hpll = {
> + .sources = clk_src_mout_hpll_list,
> + .nr_sources = ARRAY_SIZE(clk_src_mout_hpll_list),
> +};
> +
> +static struct clksrc_clk clk_mout_hpll = {
> + .clk = {
> + .name = "mout_hpll",
> + .id = -1,
> + },
> + .sources = &clk_src_mout_hpll,
> + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 12, .size = 1 },
> +};
> +
> +static struct clksrc_clk clk_div_apll = {
> + .clk = {
> + .name = "div_apll",
> + .id = -1,
> + .parent = &clk_mout_apll.clk,
> + },
> + .reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 1 },
> +};
> +
> +static struct clksrc_clk clk_div_arm = {
> + .clk = {
> + .name = "div_arm",
> + .id = -1,
> + .parent = &clk_div_apll.clk,
> + },
> + .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 },
> +};
> +
> +static struct clksrc_clk clk_div_d0_bus = {
> + .clk = {
> + .name = "div_d0_bus",
> + .id = -1,
> + .parent = &clk_div_arm.clk,
> + },
> + .reg_div = { .reg = S5P_CLK_DIV0, .shift = 8, .size = 3 },
> +};
> +
> +static struct clksrc_clk clk_div_pclkd0 = {
> + .clk = {
> + .name = "div_pclkd0",
> + .id = -1,
> + .parent = &clk_div_d0_bus.clk,
> + },
> + .reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 3 },
> +};
> +
> +static struct clksrc_clk clk_div_secss = {
> + .clk = {
> + .name = "div_secss",
> + .id = -1,
> + .parent = &clk_div_d0_bus.clk,
> + },
> + .reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 3 },
> +};
> +
> +static struct clksrc_clk clk_div_apll2 = {
> + .clk = {
> + .name = "div_apll2",
> + .id = -1,
> + .parent = &clk_mout_apll.clk,
> + },
> + .reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 3 },
> +};
> +
> +static struct clk *clk_src_mout_am_list[] = {
> + [0] = &clk_mout_mpll.clk,
> + [1] = &clk_div_apll2.clk,
> +};
> +
> +struct clksrc_sources clk_src_mout_am = {
> + .sources = clk_src_mout_am_list,
> + .nr_sources = ARRAY_SIZE(clk_src_mout_am_list),
> +};
> +
> +static struct clksrc_clk clk_mout_am = {
> + .clk = {
> + .name = "mout_am",
> + .id = -1,
> + },
> + .sources = &clk_src_mout_am,
> + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 1 },
> +};
> +
> +static struct clksrc_clk clk_div_d1_bus = {
> + .clk = {
> + .name = "div_d1_bus",
> + .id = -1,
> + .parent = &clk_mout_am.clk,
> + },
> + .reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 3 },
> +};
> +
> +static struct clksrc_clk clk_div_mpll2 = {
> + .clk = {
> + .name = "div_mpll2",
> + .id = -1,
> + .parent = &clk_mout_am.clk,
> + },
> + .reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 1 },
> +};
> +
> +static struct clksrc_clk clk_div_mpll = {
> + .clk = {
> + .name = "div_mpll",
> + .id = -1,
> + .parent = &clk_mout_am.clk,
> + },
> + .reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 2 },
> +};
> +
> +static struct clk *clk_src_mout_onenand_list[] = {
> + [0] = &clk_div_d0_bus.clk,
> + [1] = &clk_div_d1_bus.clk,
> +};
> +
> +struct clksrc_sources clk_src_mout_onenand = {
> + .sources = clk_src_mout_onenand_list,
> + .nr_sources = ARRAY_SIZE(clk_src_mout_onenand_list),
> +};
> +
> +static struct clksrc_clk clk_mout_onenand = {
> + .clk = {
> + .name = "mout_onenand",
> + .id = -1,
> + },
> + .sources = &clk_src_mout_onenand,
> + .reg_src = { .reg = S5P_CLK_SRC0, .shift = 24, .size = 1 },
> +};
> +
> +static struct clksrc_clk clk_div_onenand = {
> + .clk = {
> + .name = "div_onenand",
> + .id = -1,
> + .parent = &clk_mout_onenand.clk,
> + },
> + .reg_div = { .reg = S5P_CLK_DIV1, .shift = 20, .size = 2 },
> +};
> +
> +static struct clksrc_clk clk_div_pclkd1 = {
> + .clk = {
> + .name = "div_pclkd1",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + },
> + .reg_div = { .reg = S5P_CLK_DIV1, .shift = 16, .size = 3 },
> +};
> +
> +static struct clksrc_clk clk_div_cam = {
> + .clk = {
> + .name = "div_cam",
> + .id = -1,
> + .parent = &clk_div_mpll2.clk,
> + },
> + .reg_div = { .reg = S5P_CLK_DIV1, .shift = 24, .size = 5 },
> +};
> +
> +static struct clksrc_clk clk_div_hdmi = {
> + .clk = {
> + .name = "div_hdmi",
> + .id = -1,
> + .parent = &clk_mout_hpll.clk,
> + },
> + .reg_div = { .reg = S5P_CLK_DIV3, .shift = 28, .size = 4 },
> +};
> +
> +static int s5pc100_epll_enable(struct clk *clk, int enable)
> +{
> + unsigned int ctrlbit = clk->ctrlbit;
> + unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit;
> +
> + if (enable)
> + __raw_writel(epll_con | ctrlbit, S5P_EPLL_CON);
> + else
> + __raw_writel(epll_con, S5P_EPLL_CON);
> +
> + return 0;
> +}
> +
> +static unsigned long s5pc100_epll_get_rate(struct clk *clk)
> +{
> + return clk->rate;
> +}
> +
> +static u32 epll_div[][4] = {
> + { 32750000, 131, 3, 4 },
> + { 32768000, 131, 3, 4 },
> + { 36000000, 72, 3, 3 },
> + { 45000000, 90, 3, 3 },
> + { 45158000, 90, 3, 3 },
> + { 45158400, 90, 3, 3 },
> + { 48000000, 96, 3, 3 },
> + { 49125000, 131, 4, 3 },
> + { 49152000, 131, 4, 3 },
> + { 60000000, 120, 3, 3 },
> + { 67737600, 226, 5, 3 },
> + { 67738000, 226, 5, 3 },
> + { 73800000, 246, 5, 3 },
> + { 73728000, 246, 5, 3 },
> + { 72000000, 144, 3, 3 },
> + { 84000000, 168, 3, 3 },
> + { 96000000, 96, 3, 2 },
> + { 144000000, 144, 3, 2 },
> + { 192000000, 96, 3, 1 }
> +};
I'll just re-intereate my comment on why not have the structure
with a single rate and a single register value? I'd also prefer
to see it as a structure instead of an array, ie:
struct s5p_epll_speed {
unsigned int speed;
unsigned int con;
};
> +static int s5pc100_epll_set_rate(struct clk *clk, unsigned long rate)
> +{
> + unsigned int epll_con;
> + unsigned int i;
> +
> + if (clk->rate == rate) /* Return if nothing changed */
> + return 0;
> +
> + epll_con = __raw_readl(S5P_EPLL_CON);
> +
> + epll_con &= ~(PLL65XX_MDIV_MASK | PLL65XX_PDIV_MASK | PLL65XX_SDIV_MASK);
> +
> + for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
> + if (epll_div[i][0] == rate) {
> + epll_con |= (epll_div[i][1] << PLL65XX_MDIV_SHIFT) |
> + (epll_div[i][2] << PLL65XX_PDIV_SHIFT) |
> + (epll_div[i][3] << PLL65XX_SDIV_SHIFT);
> + break;
> + }
> + }
> +
> + if (i == ARRAY_SIZE(epll_div)) {
> + printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
> + return -EINVAL;
> + }
> +
> + __raw_writel(epll_con, S5P_EPLL_CON);
> +
> + clk->rate = rate;
> +
> + return 0;
> +}
> +
> +static struct clk_ops s5pc100_epll_ops = {
> + .get_rate = s5pc100_epll_get_rate,
> + .set_rate = s5pc100_epll_set_rate,
> +};
> +
> +static int s5pc100_d0_0_ctrl(struct clk *clk, int enable)
> +{
> + return s5p_gatectrl(S5P_CLKGATE_D00, clk, enable);
> +}
> +
> +static int s5pc100_d0_1_ctrl(struct clk *clk, int enable)
> +{
> + return s5p_gatectrl(S5P_CLKGATE_D01, clk, enable);
> +}
> +
> +static int s5pc100_d0_2_ctrl(struct clk *clk, int enable)
> +{
> + return s5p_gatectrl(S5P_CLKGATE_D02, clk, enable);
> +}
> +
> +static int s5pc100_d1_0_ctrl(struct clk *clk, int enable)
> +{
> + return s5p_gatectrl(S5P_CLKGATE_D10, clk, enable);
> +}
> +
> +static int s5pc100_d1_1_ctrl(struct clk *clk, int enable)
> +{
> + return s5p_gatectrl(S5P_CLKGATE_D11, clk, enable);
> +}
> +
> +static int s5pc100_d1_2_ctrl(struct clk *clk, int enable)
> +{
> + return s5p_gatectrl(S5P_CLKGATE_D12, clk, enable);
> +}
> +
> +static int s5pc100_d1_3_ctrl(struct clk *clk, int enable)
> +{
> + return s5p_gatectrl(S5P_CLKGATE_D13, clk, enable);
> +}
> +
> +static int s5pc100_d1_4_ctrl(struct clk *clk, int enable)
> +{
> + return s5p_gatectrl(S5P_CLKGATE_D14, clk, enable);
> +}
> +
> +static int s5pc100_d1_5_ctrl(struct clk *clk, int enable)
> +{
> + return s5p_gatectrl(S5P_CLKGATE_D15, clk, enable);
> +}
> +
> +static int s5pc100_d2_0_ctrl(struct clk *clk, int enable)
> +{
> + return s5p_gatectrl(S5P_CLKGATE_D20, clk, enable);
> +}
> +
> +static int s5pc100_sclk0_ctrl(struct clk *clk, int enable)
> +{
> + return s5p_gatectrl(S5P_CLKGATE_SCLK0, clk, enable);
> +}
> +
> +static int s5pc100_sclk1_ctrl(struct clk *clk, int enable)
> +{
> + return s5p_gatectrl(S5P_CLKGATE_SCLK1, clk, enable);
> +}
> +
> +/*
> + * The following clocks will be disabled during clock initialization. It is
> + * recommended to keep the following clocks disabled until the driver requests
> + * for enabling the clock.
> + */
> +static struct clk init_clocks_disable[] = {
> + {
> + .name = "cssys",
> + .id = -1,
> + .parent = &clk_div_d0_bus.clk,
> + .enable = s5pc100_d0_0_ctrl,
> + .ctrlbit = (1 << 6),
> + }, {
> + .name = "secss",
> + .id = -1,
> + .parent = &clk_div_d0_bus.clk,
> + .enable = s5pc100_d0_0_ctrl,
> + .ctrlbit = (1 << 5),
> + }, {
> + .name = "g2d",
> + .id = -1,
> + .parent = &clk_div_d0_bus.clk,
> + .enable = s5pc100_d0_0_ctrl,
> + .ctrlbit = (1 << 4),
> + }, {
> + .name = "mdma",
> + .id = -1,
> + .parent = &clk_div_d0_bus.clk,
> + .enable = s5pc100_d0_0_ctrl,
> + .ctrlbit = (1 << 3),
> + }, {
> + .name = "cfcon",
> + .id = -1,
> + .parent = &clk_div_d0_bus.clk,
> + .enable = s5pc100_d0_0_ctrl,
> + .ctrlbit = (1 << 2),
> + }, {
> + .name = "nfcon",
> + .id = -1,
> + .parent = &clk_div_d0_bus.clk,
> + .enable = s5pc100_d0_1_ctrl,
> + .ctrlbit = (1 << 3),
> + }, {
> + .name = "onenandc",
> + .id = -1,
> + .parent = &clk_div_d0_bus.clk,
> + .enable = s5pc100_d0_1_ctrl,
> + .ctrlbit = (1 << 2),
> + }, {
> + .name = "sdm",
> + .id = -1,
> + .parent = &clk_div_d0_bus.clk,
> + .enable = s5pc100_d0_2_ctrl,
> + .ctrlbit = (1 << 2),
> + }, {
> + .name = "seckey",
> + .id = -1,
> + .parent = &clk_div_d0_bus.clk,
> + .enable = s5pc100_d0_2_ctrl,
> + .ctrlbit = (1 << 1),
> + }, {
> + .name = "hsmmc",
> + .id = 2,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_0_ctrl,
> + .ctrlbit = (1 << 7),
> + }, {
> + .name = "hsmmc",
> + .id = 1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_0_ctrl,
> + .ctrlbit = (1 << 6),
> + }, {
> + .name = "hsmmc",
> + .id = 0,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_0_ctrl,
> + .ctrlbit = (1 << 5),
> + }, {
> + .name = "modemif",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_0_ctrl,
> + .ctrlbit = (1 << 4),
> + }, {
> + .name = "usbotg",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_0_ctrl,
> + .ctrlbit = (1 << 3),
> + }, {
> + .name = "usbhost",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_0_ctrl,
> + .ctrlbit = (1 << 2),
> + }, {
> + .name = "pdma",
> + .id = 1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_0_ctrl,
> + .ctrlbit = (1 << 1),
> + }, {
> + .name = "pdma",
> + .id = 0,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_0_ctrl,
> + .ctrlbit = (1 << 0),
> + }, {
> + .name = "fimd",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_1_ctrl,
> + .ctrlbit = (1 << 0),
> + }, {
> + .name = "rotator",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_1_ctrl,
> + .ctrlbit = (1 << 1),
> + }, {
> + .name = "fimc",
> + .id = 0,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_1_ctrl,
> + .ctrlbit = (1 << 2),
> + }, {
> + .name = "fimc",
> + .id = 1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_1_ctrl,
> + .ctrlbit = (1 << 3),
> + }, {
> + .name = "fimc",
> + .id = 2,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_1_ctrl,
> + .ctrlbit = (1 << 4),
> + }, {
> + .name = "jpeg",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_1_ctrl,
> + .ctrlbit = (1 << 5),
> + }, {
> + .name = "mipi-dsim",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_1_ctrl,
> + .ctrlbit = (1 << 6),
> + }, {
> + .name = "mipi-csis",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_1_ctrl,
> + .ctrlbit = (1 << 7),
> + }, {
> + .name = "g3d",
> + .id = 0,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_0_ctrl,
> + .ctrlbit = (1 << 8),
> + }, {
> + .name = "tv",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_2_ctrl,
> + .ctrlbit = (1 << 0),
> + }, {
> + .name = "vp",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_2_ctrl,
> + .ctrlbit = (1 << 1),
> + }, {
> + .name = "mixer",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_2_ctrl,
> + .ctrlbit = (1 << 2),
> + }, {
> + .name = "hdmi",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_2_ctrl,
> + .ctrlbit = (1 << 3),
> + }, {
> + .name = "mfc",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_2_ctrl,
> + .ctrlbit = (1 << 4),
> + }, {
> + .name = "apc",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_3_ctrl,
> + .ctrlbit = (1 << 2),
> + }, {
> + .name = "iec",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_3_ctrl,
> + .ctrlbit = (1 << 3),
> + }, {
> + .name = "systimer",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_3_ctrl,
> + .ctrlbit = (1 << 7),
> + }, {
> + .name = "watchdog",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_3_ctrl,
> + .ctrlbit = (1 << 8),
> + }, {
> + .name = "rtc",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_3_ctrl,
> + .ctrlbit = (1 << 9),
> + }, {
> + .name = "i2c",
> + .id = 0,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_4_ctrl,
> + .ctrlbit = (1 << 4),
> + }, {
> + .name = "i2c",
> + .id = 1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_4_ctrl,
> + .ctrlbit = (1 << 5),
> + }, {
> + .name = "spi",
> + .id = 0,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_4_ctrl,
> + .ctrlbit = (1 << 6),
> + }, {
> + .name = "spi",
> + .id = 1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_4_ctrl,
> + .ctrlbit = (1 << 7),
> + }, {
> + .name = "spi",
> + .id = 2,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_4_ctrl,
> + .ctrlbit = (1 << 8),
> + }, {
> + .name = "irda",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_4_ctrl,
> + .ctrlbit = (1 << 9),
> + }, {
> + .name = "ccan",
> + .id = 0,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_4_ctrl,
> + .ctrlbit = (1 << 10),
> + }, {
> + .name = "ccan",
> + .id = 1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_4_ctrl,
> + .ctrlbit = (1 << 11),
> + }, {
> + .name = "hsitx",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_4_ctrl,
> + .ctrlbit = (1 << 12),
> + }, {
> + .name = "hsirx",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_4_ctrl,
> + .ctrlbit = (1 << 13),
> + }, {
> + .name = "iis",
> + .id = 0,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_5_ctrl,
> + .ctrlbit = (1 << 0),
> + }, {
> + .name = "iis",
> + .id = 1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_5_ctrl,
> + .ctrlbit = (1 << 1),
> + }, {
> + .name = "iis",
> + .id = 2,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_5_ctrl,
> + .ctrlbit = (1 << 2),
> + }, {
> + .name = "ac97",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_5_ctrl,
> + .ctrlbit = (1 << 3),
> + }, {
> + .name = "pcm",
> + .id = 0,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_5_ctrl,
> + .ctrlbit = (1 << 4),
> + }, {
> + .name = "pcm",
> + .id = 1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_5_ctrl,
> + .ctrlbit = (1 << 5),
> + }, {
> + .name = "spdif",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_5_ctrl,
> + .ctrlbit = (1 << 6),
> + }, {
> + .name = "adc",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_5_ctrl,
> + .ctrlbit = (1 << 7),
> + }, {
> + .name = "keyif",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_5_ctrl,
> + .ctrlbit = (1 << 8),
> + }, {
> + .name = "spi_48m",
> + .id = 0,
> + .parent = &clk_mout_48m.clk,
> + .enable = s5pc100_sclk0_ctrl,
> + .ctrlbit = (1 << 7),
> + }, {
> + .name = "spi_48m",
> + .id = 1,
> + .parent = &clk_mout_48m.clk,
> + .enable = s5pc100_sclk0_ctrl,
> + .ctrlbit = (1 << 8),
> + }, {
> + .name = "spi_48m",
> + .id = 2,
> + .parent = &clk_mout_48m.clk,
> + .enable = s5pc100_sclk0_ctrl,
> + .ctrlbit = (1 << 9),
> + }, {
> + .name = "mmc_48m",
> + .id = 0,
> + .parent = &clk_mout_48m.clk,
> + .enable = s5pc100_sclk0_ctrl,
> + .ctrlbit = (1 << 15),
> + }, {
> + .name = "mmc_48m",
> + .id = 1,
> + .parent = &clk_mout_48m.clk,
> + .enable = s5pc100_sclk0_ctrl,
> + .ctrlbit = (1 << 16),
> + }, {
> + .name = "mmc_48m",
> + .id = 2,
> + .parent = &clk_mout_48m.clk,
> + .enable = s5pc100_sclk0_ctrl,
> + .ctrlbit = (1 << 17),
> + },
> +};
> +
> +static struct clk clk_vclk54m = {
> + .name = "vclk_54m",
> + .id = -1,
> + .rate = 54000000,
> +};
> +
> +static struct clk clk_i2scdclk0 = {
> + .name = "i2s_cdclk0",
> + .id = -1,
> +};
> +
> +static struct clk clk_i2scdclk1 = {
> + .name = "i2s_cdclk1",
> + .id = -1,
> +};
> +
> +static struct clk clk_i2scdclk2 = {
> + .name = "i2s_cdclk2",
> + .id = -1,
> +};
> +
> +static struct clk clk_pcmcdclk0 = {
> + .name = "pcm_cdclk0",
> + .id = -1,
> +};
> +
> +static struct clk clk_pcmcdclk1 = {
> + .name = "pcm_cdclk1",
> + .id = -1,
> +};
maybe some of these should be in a common file somewhere....
> +static struct clk *clk_src_group1_list[] = {
> + [0] = &clk_mout_epll.clk,
> + [1] = &clk_div_mpll2.clk,
> + [2] = &clk_fin_epll,
> + [3] = &clk_mout_hpll.clk,
> +};
> +
> +struct clksrc_sources clk_src_group1 = {
> + .sources = clk_src_group1_list,
> + .nr_sources = ARRAY_SIZE(clk_src_group1_list),
> +};
> +
> +static struct clk *clk_src_group2_list[] = {
> + [0] = &clk_mout_epll.clk,
> + [1] = &clk_div_mpll.clk,
> +};
> +
> +struct clksrc_sources clk_src_group2 = {
> + .sources = clk_src_group2_list,
> + .nr_sources = ARRAY_SIZE(clk_src_group2_list),
> +};
> +
> +static struct clk *clk_src_group3_list[] = {
> + [0] = &clk_mout_epll.clk,
> + [1] = &clk_div_mpll.clk,
> + [2] = &clk_fin_epll,
> + [3] = &clk_i2scdclk0,
> + [4] = &clk_pcmcdclk0,
> + [5] = &clk_mout_hpll.clk,
> +};
> +
> +struct clksrc_sources clk_src_group3 = {
> + .sources = clk_src_group3_list,
> + .nr_sources = ARRAY_SIZE(clk_src_group3_list),
> +};
> +
> +static struct clk *clk_src_group4_list[] = {
> + [0] = &clk_mout_epll.clk,
> + [1] = &clk_div_mpll.clk,
> + [2] = &clk_fin_epll,
> + [3] = &clk_i2scdclk1,
> + [4] = &clk_pcmcdclk1,
> + [5] = &clk_mout_hpll.clk,
> +};
> +
> +struct clksrc_sources clk_src_group4 = {
> + .sources = clk_src_group4_list,
> + .nr_sources = ARRAY_SIZE(clk_src_group4_list),
> +};
> +
> +static struct clk *clk_src_group5_list[] = {
> + [0] = &clk_mout_epll.clk,
> + [1] = &clk_div_mpll.clk,
> + [2] = &clk_fin_epll,
> + [3] = &clk_i2scdclk2,
> + [4] = &clk_mout_hpll.clk,
> +};
> +
> +struct clksrc_sources clk_src_group5 = {
> + .sources = clk_src_group5_list,
> + .nr_sources = ARRAY_SIZE(clk_src_group5_list),
> +};
> +
> +static struct clk *clk_src_group6_list[] = {
> + [0] = &s5p_clk_27m,
> + [1] = &clk_vclk54m,
> + [2] = &clk_div_hdmi.clk,
> +};
> +
> +struct clksrc_sources clk_src_group6 = {
> + .sources = clk_src_group6_list,
> + .nr_sources = ARRAY_SIZE(clk_src_group6_list),
> +};
> +
> +static struct clk *clk_src_group7_list[] = {
> + [0] = &clk_mout_epll.clk,
> + [1] = &clk_div_mpll.clk,
> + [2] = &clk_mout_hpll.clk,
> + [3] = &clk_vclk54m,
> +};
> +
> +struct clksrc_sources clk_src_group7 = {
> + .sources = clk_src_group7_list,
> + .nr_sources = ARRAY_SIZE(clk_src_group7_list),
> +};
> +
> +static struct clk *clk_src_mmc0_list[] = {
> + [0] = &clk_mout_epll.clk,
> + [1] = &clk_div_mpll.clk,
> + [2] = &clk_fin_epll,
> +};
> +
> +struct clksrc_sources clk_src_mmc0 = {
> + .sources = clk_src_mmc0_list,
> + .nr_sources = ARRAY_SIZE(clk_src_mmc0_list),
> +};
> +
> +static struct clk *clk_src_mmc12_list[] = {
> + [0] = &clk_mout_epll.clk,
> + [1] = &clk_div_mpll.clk,
> + [2] = &clk_fin_epll,
> + [3] = &clk_mout_hpll.clk,
> +};
> +
> +struct clksrc_sources clk_src_mmc12 = {
> + .sources = clk_src_mmc12_list,
> + .nr_sources = ARRAY_SIZE(clk_src_mmc12_list),
> +};
> +
> +static struct clk *clk_src_irda_usb_list[] = {
> + [0] = &clk_mout_epll.clk,
> + [1] = &clk_div_mpll.clk,
> + [2] = &clk_fin_epll,
> + [3] = &clk_mout_hpll.clk,
> +};
> +
> +struct clksrc_sources clk_src_irda_usb = {
> + .sources = clk_src_irda_usb_list,
> + .nr_sources = ARRAY_SIZE(clk_src_irda_usb_list),
> +};
> +
> +static struct clk *clk_src_pwi_list[] = {
> + [0] = &clk_fin_epll,
> + [1] = &clk_mout_epll.clk,
> + [2] = &clk_div_mpll.clk,
> +};
> +
> +struct clksrc_sources clk_src_pwi = {
> + .sources = clk_src_pwi_list,
> + .nr_sources = ARRAY_SIZE(clk_src_pwi_list),
> +};
> +
> +static struct clksrc_clk clksrcs[] = {
> + {
> + .clk = {
> + .name = "sclk_spi",
> + .id = 0,
> + .ctrlbit = (1 << 4),
> + .enable = s5pc100_sclk0_ctrl,
> +
> + },
> + .sources = &clk_src_group1,
> + .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 },
> + .reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
> + }, {
> + .clk = {
> + .name = "sclk_spi",
> + .id = 1,
> + .ctrlbit = (1 << 5),
> + .enable = s5pc100_sclk0_ctrl,
> +
> + },
> + .sources = &clk_src_group1,
> + .reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 },
> + .reg_div = { .reg = S5P_CLK_DIV2, .shift = 8, .size = 4 },
> + }, {
> + .clk = {
> + .name = "sclk_spi",
> + .id = 2,
> + .ctrlbit = (1 << 6),
> + .enable = s5pc100_sclk0_ctrl,
> +
> + },
> + .sources = &clk_src_group1,
> + .reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 2 },
> + .reg_div = { .reg = S5P_CLK_DIV2, .shift = 12, .size = 4 },
> + }, {
> + .clk = {
> + .name = "uclk1",
> + .id = -1,
> + .ctrlbit = (1 << 3),
> + .enable = s5pc100_sclk0_ctrl,
> +
> + },
> + .sources = &clk_src_group2,
> + .reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 },
> + .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
> + }, {
> + .clk = {
> + .name = "sclk_mixer",
> + .id = -1,
> + .ctrlbit = (1 << 6),
> + .enable = s5pc100_sclk0_ctrl,
> +
> + },
> + .sources = &clk_src_group6,
> + .reg_src = { .reg = S5P_CLK_SRC2, .shift = 28, .size = 2 },
> + }, {
> + .clk = {
> + .name = "sclk_audio",
> + .id = 0,
> + .ctrlbit = (1 << 8),
> + .enable = s5pc100_sclk1_ctrl,
> +
> + },
> + .sources = &clk_src_group3,
> + .reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 3 },
> + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 },
> + }, {
> + .clk = {
> + .name = "sclk_audio",
> + .id = 1,
> + .ctrlbit = (1 << 9),
> + .enable = s5pc100_sclk1_ctrl,
> +
> + },
> + .sources = &clk_src_group4,
> + .reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 3 },
> + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
> + }, {
> + .clk = {
> + .name = "sclk_audio",
> + .id = 2,
> + .ctrlbit = (1 << 10),
> + .enable = s5pc100_sclk1_ctrl,
> +
> + },
> + .sources = &clk_src_group5,
> + .reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 3 },
> + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 },
> + }, {
> + .clk = {
> + .name = "sclk_lcd",
> + .id = -1,
> + .ctrlbit = (1 << 0),
> + .enable = s5pc100_sclk1_ctrl,
> +
> + },
> + .sources = &clk_src_group7,
> + .reg_src = { .reg = S5P_CLK_SRC2, .shift = 12, .size = 2 },
> + .reg_div = { .reg = S5P_CLK_DIV3, .shift = 12, .size = 4 },
> + }, {
> + .clk = {
> + .name = "sclk_fimc",
> + .id = 0,
> + .ctrlbit = (1 << 1),
> + .enable = s5pc100_sclk1_ctrl,
> +
> + },
> + .sources = &clk_src_group7,
> + .reg_src = { .reg = S5P_CLK_SRC2, .shift = 16, .size = 2 },
> + .reg_div = { .reg = S5P_CLK_DIV3, .shift = 16, .size = 4 },
> + }, {
> + .clk = {
> + .name = "sclk_fimc",
> + .id = 1,
> + .ctrlbit = (1 << 2),
> + .enable = s5pc100_sclk1_ctrl,
> +
> + },
> + .sources = &clk_src_group7,
> + .reg_src = { .reg = S5P_CLK_SRC2, .shift = 20, .size = 2 },
> + .reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 },
> + }, {
> + .clk = {
> + .name = "sclk_fimc",
> + .id = 2,
> + .ctrlbit = (1 << 3),
> + .enable = s5pc100_sclk1_ctrl,
> +
> + },
> + .sources = &clk_src_group7,
> + .reg_src = { .reg = S5P_CLK_SRC2, .shift = 24, .size = 2 },
> + .reg_div = { .reg = S5P_CLK_DIV3, .shift = 24, .size = 4 },
> + }, {
> + .clk = {
> + .name = "mmc_bus",
> + .id = 0,
> + .ctrlbit = (1 << 12),
> + .enable = s5pc100_sclk1_ctrl,
> +
> + },
> + .sources = &clk_src_mmc0,
> + .reg_src = { .reg = S5P_CLK_SRC2, .shift = 0, .size = 2 },
> + .reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 },
> + }, {
> + .clk = {
> + .name = "mmc_bus",
> + .id = 1,
> + .ctrlbit = (1 << 13),
> + .enable = s5pc100_sclk1_ctrl,
> +
> + },
> + .sources = &clk_src_mmc12,
> + .reg_src = { .reg = S5P_CLK_SRC2, .shift = 4, .size = 2 },
> + .reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 },
> + }, {
> + .clk = {
> + .name = "mmc_bus",
> + .id = 2,
> + .ctrlbit = (1 << 14),
> + .enable = s5pc100_sclk1_ctrl,
> +
> + },
> + .sources = &clk_src_mmc12,
> + .reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
> + .reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
> + }, {
> + .clk = {
> + .name = "sclk_irda",
> + .id = 2,
> + .ctrlbit = (1 << 10),
> + .enable = s5pc100_sclk0_ctrl,
> +
> + },
> + .sources = &clk_src_irda_usb,
> + .reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
> + .reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
> + }, {
> + .clk = {
> + .name = "sclk_irda",
> + .id = -1,
> + .ctrlbit = (1 << 10),
> + .enable = s5pc100_sclk0_ctrl,
> +
> + },
> + .sources = &clk_src_mmc12,
> + .reg_src = { .reg = S5P_CLK_SRC1, .shift = 16, .size = 2 },
> + .reg_div = { .reg = S5P_CLK_DIV2, .shift = 16, .size = 4 },
> + }, {
> + .clk = {
> + .name = "sclk_pwi",
> + .id = -1,
> + .ctrlbit = (1 << 1),
> + .enable = s5pc100_sclk0_ctrl,
> +
> + },
> + .sources = &clk_src_pwi,
> + .reg_src = { .reg = S5P_CLK_SRC3, .shift = 0, .size = 2 },
> + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 0, .size = 3 },
> + }, {
> + .clk = {
> + .name = "sclk_uhost",
> + .id = -1,
> + .ctrlbit = (1 << 11),
> + .enable = s5pc100_sclk0_ctrl,
> +
> + },
> + .sources = &clk_src_irda_usb,
> + .reg_src = { .reg = S5P_CLK_SRC1, .shift = 20, .size = 2 },
> + .reg_div = { .reg = S5P_CLK_DIV2, .shift = 20, .size = 4 },
> + },
> +};
> +
> +
> +/* Clock initialisation code */
> +static struct clksrc_clk *sysclks[] = {
> + &clk_mout_apll,
> + &clk_mout_epll,
> + &clk_mout_mpll,
> + &clk_mout_hpll,
> + &clk_mout_48m,
> + &clk_div_apll,
> + &clk_div_arm,
> + &clk_div_d0_bus,
> + &clk_div_pclkd0,
> + &clk_div_secss,
> + &clk_div_apll2,
> + &clk_mout_am,
> + &clk_div_d1_bus,
> + &clk_div_mpll2,
> + &clk_div_mpll,
> + &clk_mout_onenand,
> + &clk_div_onenand,
> + &clk_div_pclkd1,
> + &clk_div_cam,
> + &clk_div_hdmi,
> +};
> +
> +void __init_or_cpufreq s5pc100_setup_clocks(void)
> +{
> + unsigned long xtal;
> + unsigned long arm;
> + unsigned long hclkd0;
> + unsigned long hclkd1;
> + unsigned long pclkd0;
> + unsigned long pclkd1;
> + unsigned long apll;
> + unsigned long mpll;
> + unsigned long epll;
> + unsigned long hpll;
> + unsigned int ptr;
> +
> + /* Set S5PC100 functions for clk_fout_epll */
> + clk_fout_epll.enable = s5pc100_epll_enable;
> + clk_fout_epll.ops = &s5pc100_epll_ops;
> +
> + printk(KERN_DEBUG "%s: registering clocks\n", __func__);
> +
> + xtal = clk_get_rate(&clk_xtal);
> +
> + printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
> +
> + apll = s5p_get_pll65xx(xtal, __raw_readl(S5P_APLL_CON));
> + mpll = s5p_get_pll65xx(xtal, __raw_readl(S5P_MPLL_CON));
> + epll = s5p_get_pll65xx(xtal, __raw_readl(S5P_EPLL_CON));
> + hpll = s5p_get_pll65xx(xtal, __raw_readl(S5P_HPLL_CON));
> +
> + printk(KERN_INFO "S5PC100: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz, E=%ld.%ldMHz, H=%ld.%ldMHz\n",
> + print_mhz(apll), print_mhz(mpll), print_mhz(epll), print_mhz(hpll));
> +
> + clk_fout_apll.rate = apll;
> + clk_fout_mpll.rate = mpll;
> + clk_fout_epll.rate = epll;
> + clk_mout_hpll.clk.rate = hpll;
> +
> + for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
> + s3c_set_clksrc(&clksrcs[ptr], true);
> +
> + arm = clk_get_rate(&clk_div_arm.clk);
> + hclkd0 = clk_get_rate(&clk_div_d0_bus.clk);
> + pclkd0 = clk_get_rate(&clk_div_pclkd0.clk);
> + hclkd1 = clk_get_rate(&clk_div_d1_bus.clk);
> + pclkd1 = clk_get_rate(&clk_div_pclkd1.clk);
> +
> + printk(KERN_INFO "S5PC100: HCLKD0=%ld.%ldMHz, HCLKD1=%ld.%ldMHz, PCLKD0=%ld.%ldMHz, PCLKD1=%ld.%ldMHz\n",
> + print_mhz(hclkd0), print_mhz(hclkd1), print_mhz(pclkd0), print_mhz(pclkd1));
> +
> + clk_f.rate = arm;
> + clk_h.rate = hclkd1;
> + clk_p.rate = pclkd1;
> +}
> +
> +/*
> + * The following clocks will be enabled during clock initialization.
> + */
> +static struct clk init_clocks[] = {
> + {
> + .name = "tzic",
> + .id = -1,
> + .parent = &clk_div_d0_bus.clk,
> + .enable = s5pc100_d0_0_ctrl,
> + .ctrlbit = (1 << 1),
> + }, {
> + .name = "intc",
> + .id = -1,
> + .parent = &clk_div_d0_bus.clk,
> + .enable = s5pc100_d0_0_ctrl,
> + .ctrlbit = (1 << 0),
> + }, {
> + .name = "ebi",
> + .id = -1,
> + .parent = &clk_div_d0_bus.clk,
> + .enable = s5pc100_d0_1_ctrl,
> + .ctrlbit = (1 << 5),
> + }, {
> + .name = "intmem",
> + .id = -1,
> + .parent = &clk_div_d0_bus.clk,
> + .enable = s5pc100_d0_1_ctrl,
> + .ctrlbit = (1 << 4),
> + }, {
> + .name = "sromc",
> + .id = -1,
> + .parent = &clk_div_d0_bus.clk,
> + .enable = s5pc100_d0_1_ctrl,
> + .ctrlbit = (1 << 1),
> + }, {
> + .name = "dmc",
> + .id = -1,
> + .parent = &clk_div_d0_bus.clk,
> + .enable = s5pc100_d0_1_ctrl,
> + .ctrlbit = (1 << 0),
> + }, {
> + .name = "chipid",
> + .id = -1,
> + .parent = &clk_div_d0_bus.clk,
> + .enable = s5pc100_d0_1_ctrl,
> + .ctrlbit = (1 << 0),
> + }, {
> + .name = "gpio",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_3_ctrl,
> + .ctrlbit = (1 << 1),
> + }, {
> + .name = "uart",
> + .id = 0,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_4_ctrl,
> + .ctrlbit = (1 << 0),
> + }, {
> + .name = "uart",
> + .id = 1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_4_ctrl,
> + .ctrlbit = (1 << 1),
> + }, {
> + .name = "uart",
> + .id = 2,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_4_ctrl,
> + .ctrlbit = (1 << 2),
> + }, {
> + .name = "uart",
> + .id = 3,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_4_ctrl,
> + .ctrlbit = (1 << 3),
> + }, {
> + .name = "timers",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_3_ctrl,
> + .ctrlbit = (1 << 6),
> + },
> +};
> +
> +static struct clk *clks[] __initdata = {
> + &clk_ext,
> + &clk_i2scdclk0,
> + &clk_i2scdclk1,
> + &clk_i2scdclk2,
> + &clk_pcmcdclk0,
> + &clk_pcmcdclk1,
> +};
> +
> +void __init s5pc100_register_clocks(void)
> +{
> + struct clk *clkp;
> + int ret;
> + int ptr;
> +
> + s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
> +
> + for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
> + s3c_register_clksrc(sysclks[ptr], 1);
> +
> + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
> + s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
> +
> + clkp = init_clocks_disable;
> + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
> +
> + ret = s3c24xx_register_clock(clkp);
> + if (ret < 0) {
> + printk(KERN_ERR "Failed to register clock %s (%d)\n",
> + clkp->name, ret);
> + }
> + (clkp->enable)(clkp, 0);
> + }
> +
> + s3c_pwmclk_init();
> +}
> diff --git a/arch/arm/mach-s5pc100/include/mach/regs-clock.h b/arch/arm/mach-s5pc100/include/mach/regs-clock.h
> new file mode 100644
> index 0000000..f2283bd
> --- /dev/null
> +++ b/arch/arm/mach-s5pc100/include/mach/regs-clock.h
> @@ -0,0 +1,71 @@
> +/* linux/arch/arm/mach-s5pc100/include/mach/regs-clock.h
> + *
> + * Copyright (c) 2010 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com/
> + *
> + * S5PC100 - Clock register definitions
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#ifndef __ASM_ARCH_REGS_CLOCK_H
> +#define __ASM_ARCH_REGS_CLOCK_H __FILE__
> +
> +#include <mach/map.h>
> +
> +#define S5P_CLKREG(x) (S3C_VA_SYS + (x))
> +
> +#define S5P_APLL_LOCK S5P_CLKREG(0x00)
> +#define S5P_MPLL_LOCK S5P_CLKREG(0x04)
> +#define S5P_EPLL_LOCK S5P_CLKREG(0x08)
> +#define S5P_HPLL_LOCK S5P_CLKREG(0x0C)
> +
> +#define S5P_APLL_CON S5P_CLKREG(0x100)
> +#define S5P_MPLL_CON S5P_CLKREG(0x104)
> +#define S5P_EPLL_CON S5P_CLKREG(0x108)
> +#define S5P_HPLL_CON S5P_CLKREG(0x10C)
> +
> +#define S5P_CLK_SRC0 S5P_CLKREG(0x200)
> +#define S5P_CLK_SRC1 S5P_CLKREG(0x204)
> +#define S5P_CLK_SRC2 S5P_CLKREG(0x208)
> +#define S5P_CLK_SRC3 S5P_CLKREG(0x20C)
> +
> +#define S5P_CLK_DIV0 S5P_CLKREG(0x300)
> +#define S5P_CLK_DIV1 S5P_CLKREG(0x304)
> +#define S5P_CLK_DIV2 S5P_CLKREG(0x308)
> +#define S5P_CLK_DIV3 S5P_CLKREG(0x30C)
> +#define S5P_CLK_DIV4 S5P_CLKREG(0x310)
> +
> +#define S5P_CLK_OUT S5P_CLKREG(0x400)
> +
> +#define S5P_CLKGATE_D00 S5P_CLKREG(0x500)
> +#define S5P_CLKGATE_D01 S5P_CLKREG(0x504)
> +#define S5P_CLKGATE_D02 S5P_CLKREG(0x508)
> +
> +#define S5P_CLKGATE_D10 S5P_CLKREG(0x520)
> +#define S5P_CLKGATE_D11 S5P_CLKREG(0x524)
> +#define S5P_CLKGATE_D12 S5P_CLKREG(0x528)
> +#define S5P_CLKGATE_D13 S5P_CLKREG(0x52C)
> +#define S5P_CLKGATE_D14 S5P_CLKREG(0x530)
> +#define S5P_CLKGATE_D15 S5P_CLKREG(0x534)
> +
> +#define S5P_CLKGATE_D20 S5P_CLKREG(0x540)
> +
> +#define S5P_CLKGATE_SCLK0 S5P_CLKREG(0x560)
> +#define S5P_CLKGATE_SCLK1 S5P_CLKREG(0x564)
> +
> +/* CLKDIV0 */
> +#define S5P_CLKDIV0_D0_MASK (0x7<<8)
> +#define S5P_CLKDIV0_D0_SHIFT (8)
> +#define S5P_CLKDIV0_PCLKD0_MASK (0x7<<12)
> +#define S5P_CLKDIV0_PCLKD0_SHIFT (12)
> +
> +/* CLKDIV1 */
> +#define S5P_CLKDIV1_D1_MASK (0x7<<12)
> +#define S5P_CLKDIV1_D1_SHIFT (12)
> +#define S5P_CLKDIV1_PCLKD1_MASK (0x7<<16)
> +#define S5P_CLKDIV1_PCLKD1_SHIFT (16)
> +
> +#endif /* __ASM_ARCH_REGS_CLOCK_H */
> diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c
> index aa96e33..5cfa482 100644
> --- a/arch/arm/plat-s5p/clock.c
> +++ b/arch/arm/plat-s5p/clock.c
> @@ -33,7 +33,7 @@ struct clk clk_ext_xtal_mux = {
> .id = -1,
> };
>
> -static struct clk s5p_clk_27m = {
> +struct clk s5p_clk_27m = {
> .name = "clk_27m",
> .id = -1,
> .rate = 27000000,
> diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h
> index d48325b..7db3227 100644
> --- a/arch/arm/plat-s5p/include/plat/pll.h
> +++ b/arch/arm/plat-s5p/include/plat/pll.h
> @@ -81,3 +81,25 @@ static inline unsigned long s5p_get_pll90xx(unsigned long baseclk,
>
> return result;
> }
> +
> +#define PLL65XX_MDIV_MASK (0x3FF)
> +#define PLL65XX_PDIV_MASK (0x3F)
> +#define PLL65XX_SDIV_MASK (0x7)
> +#define PLL65XX_MDIV_SHIFT (16)
> +#define PLL65XX_PDIV_SHIFT (8)
> +#define PLL65XX_SDIV_SHIFT (0)
> +
> +static inline unsigned long s5p_get_pll65xx(unsigned long baseclk, u32 pll_con)
> +{
> + u32 mdiv, pdiv, sdiv;
> + u64 fvco = baseclk;
> +
> + mdiv = (pll_con >> PLL65XX_MDIV_SHIFT) & PLL65XX_MDIV_MASK;
> + pdiv = (pll_con >> PLL65XX_PDIV_SHIFT) & PLL65XX_PDIV_MASK;
> + sdiv = (pll_con >> PLL65XX_SDIV_SHIFT) & PLL65XX_SDIV_MASK;
> +
> + fvco *= mdiv;
> + do_div(fvco, (pdiv << sdiv));
> +
> + return (unsigned long)fvco;
> +}
let's look at putting these in arch/arm/plat-samsung/include/plat
as iirc we've actually already got a branch wehere we move this pll
block out from 64xx for re-use.
> diff --git a/arch/arm/plat-s5p/include/plat/s5p-clock.h b/arch/arm/plat-s5p/include/plat/s5p-clock.h
> index 56fb8b4..28fae4e 100644
> --- a/arch/arm/plat-s5p/include/plat/s5p-clock.h
> +++ b/arch/arm/plat-s5p/include/plat/s5p-clock.h
> @@ -21,9 +21,11 @@
> #define clk_fin_mpll clk_ext_xtal_mux
> #define clk_fin_epll clk_ext_xtal_mux
> #define clk_fin_vpll clk_ext_xtal_mux
> +#define clk_fin_hpll clk_ext_xtal_mux
>
> extern struct clk clk_ext_xtal_mux;
> extern struct clk clk_48m;
> +extern struct clk s5p_clk_27m;
do we need to start calling these s5p_clk_27m? how about just clk_27m.
> extern struct clk clk_fout_apll;
> extern struct clk clk_fout_mpll;
> extern struct clk clk_fout_epll;
> --
> 1.6.6.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
--
Ben
Q: What's a light-year?
A: One-third less calories than a regular year.
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH] ARM: S5PC100: Modified the clock code to conform to Samsung clock API.
2010-05-13 1:10 [PATCH] ARM: S5PC100: Modified the clock code to conform to Samsung clock API Kukjin Kim
2010-05-13 1:32 ` Ben Dooks
@ 2010-05-13 6:47 ` Marek Szyprowski
2010-05-13 7:28 ` Ben Dooks
2010-05-13 9:16 ` Marek Szyprowski
2 siblings, 1 reply; 5+ messages in thread
From: Marek Szyprowski @ 2010-05-13 6:47 UTC (permalink / raw)
To: linux-arm-kernel
Hello,
On Thursday, May 13, 2010 3:10 AM Kukjin Kim wrote:
> From: Thomas Abraham <thomas.ab@samsung.com>
>
> Re-worked the existing clock code for Samsung's S5PC100 SoC to be in
> sync with new clock API.
>
> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
> ---
> arch/arm/mach-s5pc100/Makefile | 2 +-
> arch/arm/mach-s5pc100/clock.c | 1368
> +++++++++++++++++++++++
> arch/arm/mach-s5pc100/include/mach/regs-clock.h | 71 ++
> arch/arm/plat-s5p/clock.c | 2 +-
> arch/arm/plat-s5p/include/plat/pll.h | 22 +
> arch/arm/plat-s5p/include/plat/s5p-clock.h | 2 +
> 6 files changed, 1465 insertions(+), 2 deletions(-)
> create mode 100755 arch/arm/mach-s5pc100/clock.c
> create mode 100644 arch/arm/mach-s5pc100/include/mach/regs-clock.h
>
> diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-
> s5pc100/Makefile
> index 809ff10..8540509 100644
> --- a/arch/arm/mach-s5pc100/Makefile
> +++ b/arch/arm/mach-s5pc100/Makefile
> @@ -11,7 +11,7 @@ obj- :=
>
> # Core support for S5PC100 system
>
> -obj-$(CONFIG_CPU_S5PC100) += cpu.o
> +obj-$(CONFIG_CPU_S5PC100) += cpu.o clock.o
This currently causes a build break.
Anyway, I will try to use this patch as a base for my s5pc100 patch
series.
> ...
Best regards
--
Marek Szyprowski
Samsung Poland R&D Center
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH] ARM: S5PC100: Modified the clock code to conform to Samsung clock API.
2010-05-13 6:47 ` Marek Szyprowski
@ 2010-05-13 7:28 ` Ben Dooks
0 siblings, 0 replies; 5+ messages in thread
From: Ben Dooks @ 2010-05-13 7:28 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, May 13, 2010 at 08:47:10AM +0200, Marek Szyprowski wrote:
> Hello,
>
> On Thursday, May 13, 2010 3:10 AM Kukjin Kim wrote:
>
> > From: Thomas Abraham <thomas.ab@samsung.com>
> >
> > Re-worked the existing clock code for Samsung's S5PC100 SoC to be in
> > sync with new clock API.
> >
> > Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
> > Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
> > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
> > ---
> > arch/arm/mach-s5pc100/Makefile | 2 +-
> > arch/arm/mach-s5pc100/clock.c | 1368
> > +++++++++++++++++++++++
> > arch/arm/mach-s5pc100/include/mach/regs-clock.h | 71 ++
> > arch/arm/plat-s5p/clock.c | 2 +-
> > arch/arm/plat-s5p/include/plat/pll.h | 22 +
> > arch/arm/plat-s5p/include/plat/s5p-clock.h | 2 +
> > 6 files changed, 1465 insertions(+), 2 deletions(-)
> > create mode 100755 arch/arm/mach-s5pc100/clock.c
> > create mode 100644 arch/arm/mach-s5pc100/include/mach/regs-clock.h
> >
> > diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-
> > s5pc100/Makefile
> > index 809ff10..8540509 100644
> > --- a/arch/arm/mach-s5pc100/Makefile
> > +++ b/arch/arm/mach-s5pc100/Makefile
> > @@ -11,7 +11,7 @@ obj- :=
> >
> > # Core support for S5PC100 system
> >
> > -obj-$(CONFIG_CPU_S5PC100) += cpu.o
> > +obj-$(CONFIG_CPU_S5PC100) += cpu.o clock.o
>
> This currently causes a build break.
would be nice to show what the build break is...
> Anyway, I will try to use this patch as a base for my s5pc100 patch
> series.
>
> > ...
>
> Best regards
> --
> Marek Szyprowski
> Samsung Poland R&D Center
>
>
--
--
Ben
Q: What's a light-year?
A: One-third less calories than a regular year.
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH] ARM: S5PC100: Modified the clock code to conform to Samsung clock API.
2010-05-13 1:10 [PATCH] ARM: S5PC100: Modified the clock code to conform to Samsung clock API Kukjin Kim
2010-05-13 1:32 ` Ben Dooks
2010-05-13 6:47 ` Marek Szyprowski
@ 2010-05-13 9:16 ` Marek Szyprowski
2 siblings, 0 replies; 5+ messages in thread
From: Marek Szyprowski @ 2010-05-13 9:16 UTC (permalink / raw)
To: linux-arm-kernel
Hello,
On Thursday, May 13, 2010 3:10 AM Kukjin Kim wrote:
> From: Thomas Abraham <thomas.ab@samsung.com>
>
> Re-worked the existing clock code for Samsung's S5PC100 SoC to be in
> sync with new clock API.
>
> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
> ---
> arch/arm/mach-s5pc100/Makefile | 2 +-
> arch/arm/mach-s5pc100/clock.c | 1368
> +++++++++++++++++++++++
> arch/arm/mach-s5pc100/include/mach/regs-clock.h | 71 ++
> arch/arm/plat-s5p/clock.c | 2 +-
> arch/arm/plat-s5p/include/plat/pll.h | 22 +
> arch/arm/plat-s5p/include/plat/s5p-clock.h | 2 +
> 6 files changed, 1465 insertions(+), 2 deletions(-)
> create mode 100755 arch/arm/mach-s5pc100/clock.c
> create mode 100644 arch/arm/mach-s5pc100/include/mach/regs-clock.h
>
> diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-
> s5pc100/Makefile
> index 809ff10..8540509 100644
> --- a/arch/arm/mach-s5pc100/Makefile
> +++ b/arch/arm/mach-s5pc100/Makefile
> @@ -11,7 +11,7 @@ obj- :=
>
> # Core support for S5PC100 system
>
> -obj-$(CONFIG_CPU_S5PC100) += cpu.o
> +obj-$(CONFIG_CPU_S5PC100) += cpu.o clock.o
>
> # Helper and device support
>
> diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
> new file mode 100755
> index 0000000..fac8ff0
> --- /dev/null
> +++ b/arch/arm/mach-s5pc100/clock.c
> @@ -0,0 +1,1368 @@
> ...
> +static struct clk init_clocks_disable[] = {
> + {
> + .name = "cssys",
> + .id = -1,
> + .parent = &clk_div_d0_bus.clk,
> + .enable = s5pc100_d0_0_ctrl,
> + .ctrlbit = (1 << 6),
> + }, {
> + .name = "secss",
> + .id = -1,
> + .parent = &clk_div_d0_bus.clk,
> + .enable = s5pc100_d0_0_ctrl,
> + .ctrlbit = (1 << 5),
> + }, {
> + .name = "g2d",
> + .id = -1,
> + .parent = &clk_div_d0_bus.clk,
> + .enable = s5pc100_d0_0_ctrl,
> + .ctrlbit = (1 << 4),
> + }, {
> + .name = "mdma",
> + .id = -1,
> + .parent = &clk_div_d0_bus.clk,
> + .enable = s5pc100_d0_0_ctrl,
> + .ctrlbit = (1 << 3),
> + }, {
> + .name = "cfcon",
> + .id = -1,
> + .parent = &clk_div_d0_bus.clk,
> + .enable = s5pc100_d0_0_ctrl,
> + .ctrlbit = (1 << 2),
> + }, {
> + .name = "nfcon",
> + .id = -1,
> + .parent = &clk_div_d0_bus.clk,
> + .enable = s5pc100_d0_1_ctrl,
> + .ctrlbit = (1 << 3),
> + }, {
> + .name = "onenandc",
> + .id = -1,
> + .parent = &clk_div_d0_bus.clk,
> + .enable = s5pc100_d0_1_ctrl,
> + .ctrlbit = (1 << 2),
> + }, {
> + .name = "sdm",
> + .id = -1,
> + .parent = &clk_div_d0_bus.clk,
> + .enable = s5pc100_d0_2_ctrl,
> + .ctrlbit = (1 << 2),
> + }, {
> + .name = "seckey",
> + .id = -1,
> + .parent = &clk_div_d0_bus.clk,
> + .enable = s5pc100_d0_2_ctrl,
> + .ctrlbit = (1 << 1),
> + }, {
> + .name = "hsmmc",
> + .id = 2,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_0_ctrl,
> + .ctrlbit = (1 << 7),
> + }, {
> + .name = "hsmmc",
> + .id = 1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_0_ctrl,
> + .ctrlbit = (1 << 6),
> + }, {
> + .name = "hsmmc",
> + .id = 0,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_0_ctrl,
> + .ctrlbit = (1 << 5),
> + }, {
> + .name = "modemif",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_0_ctrl,
> + .ctrlbit = (1 << 4),
> + }, {
> + .name = "usbotg",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_0_ctrl,
> + .ctrlbit = (1 << 3),
> + }, {
> + .name = "usbhost",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_0_ctrl,
> + .ctrlbit = (1 << 2),
> + }, {
> + .name = "pdma",
> + .id = 1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_0_ctrl,
> + .ctrlbit = (1 << 1),
> + }, {
> + .name = "pdma",
> + .id = 0,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_0_ctrl,
> + .ctrlbit = (1 << 0),
> + }, {
> + .name = "fimd",
> + .id = -1,
> + .parent = &clk_div_d1_bus.clk,
> + .enable = s5pc100_d1_1_ctrl,
> + .ctrlbit = (1 << 0),
Use 'lcd' name for this clock. Current s3c-fb driver uses it to get the value
of HCLK clock to calculate the pixel clock value.
Best regards
--
Marek Szyprowski
Samsung Poland R&D Center
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2010-05-13 9:16 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-05-13 1:10 [PATCH] ARM: S5PC100: Modified the clock code to conform to Samsung clock API Kukjin Kim
2010-05-13 1:32 ` Ben Dooks
2010-05-13 6:47 ` Marek Szyprowski
2010-05-13 7:28 ` Ben Dooks
2010-05-13 9:16 ` Marek Szyprowski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).