From: ben@trinity.fluff.org (Ben Dooks)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 10/11] ARM: SAMSUNG: Remove the TYPE and replace it with a Feature
Date: Fri, 14 May 2010 08:38:19 +0100 [thread overview]
Message-ID: <20100514073819.GC27571@trinity.fluff.org> (raw)
In-Reply-To: <1273821923-17552-1-git-send-email-kgene.kim@samsung.com>
On Fri, May 14, 2010 at 04:25:23PM +0900, Kukjin Kim wrote:
> From: Naveen Krishna <ch.naveen@samsung.com>
>
> This patch makes changes in the core files to remove the TYPE
> and replace it with a Feature bit field instead.
not quite what I had in mind, I was just considering replacing the
TYPE_S3C in the device_id_table with a features flag in the driver
itself, and not altering any of the platform data.
Note, platform data really should be for the per-board information
not for soc info... I'm sort of sorry now that we ended up passing
a pile of what I now belive to be SoC specific data for the SDHCI
block via the platform-data, it only makes life difficult for everyone
else.
> Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com>
> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
> ---
>
> This 2 new patches which require the previous 9 patches to be applied. (0010 & 0011)
> This patch set of 9 patches contains core changes & driver changes into seperate patches.
> The 2 new patches would remove the TYPE from the core and driver file and replace it with
> Feature field as suggested by Ben Dooks.
>
> arch/arm/mach-s3c64xx/mach-smdk6410.c | 1 +
> arch/arm/mach-s3c64xx/s3c6410.c | 1 -
> arch/arm/mach-s5p6440/cpu.c | 1 -
> arch/arm/mach-s5p6440/mach-smdk6440.c | 1 +
> arch/arm/mach-s5pv210/cpu.c | 1 -
> arch/arm/mach-s5pv210/mach-smdkv210.c | 1 +
> arch/arm/plat-samsung/dev-ts.c | 1 +
> arch/arm/plat-samsung/include/plat/ts.h | 1 +
> 8 files changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
> index fb186c9..a8ead39 100644
> --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
> +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
> @@ -604,6 +604,7 @@ static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
> .delay = 10000,
> .presc = 49,
> .oversampling_shift = 2,
> + .feature = 1 << 0, /* HAS ADCCLRINTPNDNUP */
> };
>
> static void __init smdk6410_map_io(void)
> diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
> index 4390ecb..31e53fa 100644
> --- a/arch/arm/mach-s3c64xx/s3c6410.c
> +++ b/arch/arm/mach-s3c64xx/s3c6410.c
> @@ -55,7 +55,6 @@ void __init s3c6410_map_io(void)
>
> s3c_device_adc.name = "s3c64xx-adc";
> s3c_device_nand.name = "s3c6400-nand";
> - s3c_device_ts.name = "s3c64xx-ts";
> }
>
> void __init s3c6410_init_clocks(int xtal)
> diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c
> index e461955..78c0e47 100644
> --- a/arch/arm/mach-s5p6440/cpu.c
> +++ b/arch/arm/mach-s5p6440/cpu.c
> @@ -61,7 +61,6 @@ static void s5p6440_idle(void)
> void __init s5p6440_map_io(void)
> {
> /* initialize any device information early */
> - s3c_device_ts.name = "s3c64xx-ts";
> s3c_device_adc.name = "s3c64xx-adc";
> }
>
> diff --git a/arch/arm/mach-s5p6440/mach-smdk6440.c b/arch/arm/mach-s5p6440/mach-smdk6440.c
> index 177701b..afb53b1 100644
> --- a/arch/arm/mach-s5p6440/mach-smdk6440.c
> +++ b/arch/arm/mach-s5p6440/mach-smdk6440.c
> @@ -94,6 +94,7 @@ static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
> .delay = 10000,
> .presc = 49,
> .oversampling_shift = 2,
> + .feature = 1 << 0, /* HAS ADCCLRINTPNDNUP */
> };
>
> static void __init smdk6440_map_io(void)
> diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
> index dd3dcca..8391342 100644
> --- a/arch/arm/mach-s5pv210/cpu.c
> +++ b/arch/arm/mach-s5pv210/cpu.c
> @@ -74,7 +74,6 @@ static void s5pv210_idle(void)
>
> void __init s5pv210_map_io(void)
> {
> - s3c_device_ts.name = "s5pv210-ts";
> s3c_device_adc.name = "s3c64xx-adc";
>
> iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
> diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
> index 1440cb2..a0b0a67 100644
> --- a/arch/arm/mach-s5pv210/mach-smdkv210.c
> +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
> @@ -82,6 +82,7 @@ static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
> .delay = 10000,
> .presc = 49,
> .oversampling_shift = 2,
> + .feature = 1 << 0, /* HAS ADCCLRINTPNDNUP */
> };
>
> static void __init smdkv210_map_io(void)
> diff --git a/arch/arm/plat-samsung/dev-ts.c b/arch/arm/plat-samsung/dev-ts.c
> index 8d7cefb..7571691 100644
> --- a/arch/arm/plat-samsung/dev-ts.c
> +++ b/arch/arm/plat-samsung/dev-ts.c
> @@ -13,6 +13,7 @@
>
> #include <linux/kernel.h>
> #include <linux/platform_device.h>
> +#include <linux/slab.h>
>
> #include <mach/map.h>
> #include <mach/irqs.h>
> diff --git a/arch/arm/plat-samsung/include/plat/ts.h b/arch/arm/plat-samsung/include/plat/ts.h
> index 26fdb22..82c0eaf 100644
> --- a/arch/arm/plat-samsung/include/plat/ts.h
> +++ b/arch/arm/plat-samsung/include/plat/ts.h
> @@ -14,6 +14,7 @@ struct s3c2410_ts_mach_info {
> int delay;
> int presc;
> int oversampling_shift;
> + int feature;
> void (*cfg_gpio)(struct platform_device *dev);
> };
>
> --
> 1.6.2.5
>
--
--
Ben
Q: What's a light-year?
A: One-third less calories than a regular year.
next prev parent reply other threads:[~2010-05-14 7:38 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-14 7:25 [PATCH v2 10/11] ARM: SAMSUNG: Remove the TYPE and replace it with a Feature Kukjin Kim
2010-05-14 7:38 ` Ben Dooks [this message]
-- strict thread matches above, loose matches on Subject: below --
2010-05-14 8:17 NAVEEN KRISHNA CHATRADHI
2010-05-14 9:00 ` Ben Dooks
2010-05-14 9:12 NAVEEN KRISHNA CHATRADHI
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100514073819.GC27571@trinity.fluff.org \
--to=ben@trinity.fluff.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).