From: ben-linux@fluff.org (Ben Dooks)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/8] ARM: SAMSUNG: Move RTC device definitions in plat-samsung
Date: Tue, 18 May 2010 08:12:57 +0100 [thread overview]
Message-ID: <20100518071257.GD26401@trinity.fluff.org> (raw)
In-Reply-To: <1274162336-32667-1-git-send-email-kgene.kim@samsung.com>
On Tue, May 18, 2010 at 02:58:56PM +0900, Kukjin Kim wrote:
> From: Atul Dahiya <atul.dahiya@samsung.com>
>
> This patch moves RTC device definitions from mach-s3c64xx
> to plat-samsung, to enable the other SoCs to use same device
> definition.
>
> Signed-off-by: Atul Dahiya <atul.dahiya@samsung.com>
> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
ok, will apply to a branch.
> ---
> arch/arm/mach-s3c64xx/Makefile | 1 -
> arch/arm/mach-s3c64xx/include/mach/map.h | 1 +
> arch/arm/plat-samsung/Kconfig | 5 +++
> arch/arm/plat-samsung/Makefile | 1 +
> arch/arm/{mach-s3c64xx => plat-samsung}/dev-rtc.c | 28 ++++++++++----------
> 5 files changed, 21 insertions(+), 15 deletions(-)
> rename arch/arm/{mach-s3c64xx => plat-samsung}/dev-rtc.c (58%)
>
> diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
> index a690a9d..e7ac812 100644
> --- a/arch/arm/mach-s3c64xx/Makefile
> +++ b/arch/arm/mach-s3c64xx/Makefile
> @@ -56,7 +56,6 @@ obj-$(CONFIG_MACH_HMT) += mach-hmt.o
> # device support
>
> obj-y += dev-uart.o
> -obj-y += dev-rtc.o
> obj-y += dev-audio.o
> obj-$(CONFIG_S3C_ADC) += dev-adc.o
> obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
> diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h
> index 801c1c0..cce28a9 100644
> --- a/arch/arm/mach-s3c64xx/include/mach/map.h
> +++ b/arch/arm/mach-s3c64xx/include/mach/map.h
> @@ -103,5 +103,6 @@
> #define S3C_PA_USBHOST S3C64XX_PA_USBHOST
> #define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG
> #define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
> +#define S3C_PA_RTC S3C64XX_PA_RTC
>
> #endif /* __ASM_ARCH_6400_MAP_H */
> diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
> index 287e6f7..29e2800 100644
> --- a/arch/arm/plat-samsung/Kconfig
> +++ b/arch/arm/plat-samsung/Kconfig
> @@ -190,6 +190,11 @@ config S3C_DEV_NAND
> help
> Compile in platform device definition for NAND controller
>
> +config S3C_DEV_RTC
> + bool
> + help
> + Complie in platform device definition for RTC
> +
> config S3C64XX_DEV_SPI
> bool
> help
> diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
> index 0ad820a..af17434 100644
> --- a/arch/arm/plat-samsung/Makefile
> +++ b/arch/arm/plat-samsung/Makefile
> @@ -41,6 +41,7 @@ obj-y += dev-uart.o
> obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
> obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o
> obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o
> +obj-$(CONFIG_S3C_DEV_RTC) += dev-rtc.o
>
> # DMA support
>
> diff --git a/arch/arm/mach-s3c64xx/dev-rtc.c b/arch/arm/plat-samsung/dev-rtc.c
> similarity index 58%
> rename from arch/arm/mach-s3c64xx/dev-rtc.c
> rename to arch/arm/plat-samsung/dev-rtc.c
> index b9e7a05..bf4e226 100644
> --- a/arch/arm/mach-s3c64xx/dev-rtc.c
> +++ b/arch/arm/plat-samsung/dev-rtc.c
> @@ -1,4 +1,4 @@
> -/* linux/arch/arm/plat-s3c64xx/dev-rtc.c
> +/* linux/arch/arm/plat-samsung/dev-rtc.c
> *
> * Copyright 2009 by Maurus Cuelenaere <mcuelenaere@gmail.com>
> *
> @@ -18,26 +18,26 @@
>
> static struct resource s3c_rtc_resource[] = {
> [0] = {
> - .start = S3C64XX_PA_RTC,
> - .end = S3C64XX_PA_RTC + 0xff,
> - .flags = IORESOURCE_MEM,
> + .start = S3C_PA_RTC,
> + .end = S3C_PA_RTC + 0xff,
> + .flags = IORESOURCE_MEM,
> },
> [1] = {
> - .start = IRQ_RTC_ALARM,
> - .end = IRQ_RTC_ALARM,
> - .flags = IORESOURCE_IRQ,
> + .start = IRQ_RTC_ALARM,
> + .end = IRQ_RTC_ALARM,
> + .flags = IORESOURCE_IRQ,
> },
> [2] = {
> - .start = IRQ_RTC_TIC,
> - .end = IRQ_RTC_TIC,
> - .flags = IORESOURCE_IRQ
> + .start = IRQ_RTC_TIC,
> + .end = IRQ_RTC_TIC,
> + .flags = IORESOURCE_IRQ
> }
> };
>
> struct platform_device s3c_device_rtc = {
> - .name = "s3c64xx-rtc",
> - .id = -1,
> - .num_resources = ARRAY_SIZE(s3c_rtc_resource),
> - .resource = s3c_rtc_resource,
> + .name = "s3c64xx-rtc",
> + .id = -1,
> + .num_resources = ARRAY_SIZE(s3c_rtc_resource),
> + .resource = s3c_rtc_resource,
> };
> EXPORT_SYMBOL(s3c_device_rtc);
> --
> 1.6.2.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
--
Ben
Q: What's a light-year?
A: One-third less calories than a regular year.
next prev parent reply other threads:[~2010-05-18 7:12 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-18 5:58 [PATCH 1/8] ARM: SAMSUNG: Move RTC device definitions in plat-samsung Kukjin Kim
2010-05-18 7:12 ` Ben Dooks [this message]
2010-05-18 8:03 ` Ben Dooks
2010-05-18 19:13 ` Mark Brown
2010-05-19 2:04 ` Ben Dooks
2010-05-19 2:15 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100518071257.GD26401@trinity.fluff.org \
--to=ben-linux@fluff.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).