From: paul@pwsan.com (Paul Walmsley)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 10/22] OMAP: hwmod: Replace WARN by pr_warning for clockdomain check
Date: Tue, 18 May 2010 20:18:50 -0600 [thread overview]
Message-ID: <20100519021848.19716.50002.stgit@localhost.localdomain> (raw)
In-Reply-To: <20100519021800.19716.8938.stgit@localhost.localdomain>
From: Benoit Cousson <b-cousson@ti.com>
Most of the clock nodes belong to a clock domain, but it is perfectly valid
to have clock without clock domain.
Root clocks for example does not belong to any clock domain.
Keep the warning but reduce the verbosity.
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/omap_hwmod.c | 13 ++++++-------
1 files changed, 6 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index b6031e4..2fff39f 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -404,21 +404,20 @@ static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
*/
static int _init_main_clk(struct omap_hwmod *oh)
{
- struct clk *c;
int ret = 0;
if (!oh->main_clk)
return 0;
- c = omap_clk_get_by_name(oh->main_clk);
- if (!c)
+ oh->_clk = omap_clk_get_by_name(oh->main_clk);
+ if (!oh->_clk)
pr_warning("omap_hwmod: %s: cannot clk_get main_clk %s\n",
oh->name, oh->main_clk);
- ret = -EINVAL;
- oh->_clk = c;
+ return -EINVAL;
- WARN(!c->clkdm, "omap_hwmod: %s: missing clockdomain for %s.\n",
- oh->main_clk, c->name);
+ if (!oh->_clk->clkdm)
+ pr_warning("omap_hwmod: %s: missing clockdomain for %s.\n",
+ oh->main_clk, oh->_clk->name);
return ret;
}
next prev parent reply other threads:[~2010-05-19 2:18 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-19 2:18 [PATCH 00/22] OMAP PRCM/clock/powerdomain/hwmod: remaining patches for 2.6.35 Paul Walmsley
2010-05-19 2:18 ` [PATCH 01/22] OMAP4: hwmod: Replace module & device offsets by absolute clkctrl address Paul Walmsley
2010-05-19 2:18 ` [PATCH 02/22] OMAP: CM: Move MAX_MODULE_READY_TIME to cm.h Paul Walmsley
2010-05-19 2:18 ` [PATCH 03/22] OMAP4: hwmod & CM: Implement the omap4_cm_wait_module_ready function Paul Walmsley
2010-05-19 2:18 ` [PATCH 04/22] OMAP4: hwmod: Replace OCPIF_HAS_IDLEST by HWMOD_NO_IDLEST Paul Walmsley
2010-05-19 2:18 ` [PATCH 05/22] OMAP: hwmod: Fix wrong pointer iteration in oh->slaves Paul Walmsley
2010-05-19 2:18 ` [PATCH 06/22] OMAP: hwmod: Remove IS_ERR check with omap_clk_get_by_name return value Paul Walmsley
2010-05-19 2:18 ` [PATCH 07/22] OMAP: hwmod: Replace WARN by pr_warning if clock lookup failed Paul Walmsley
2010-05-21 10:00 ` Sergei Shtylyov
2010-05-21 10:16 ` Benoit Cousson
2010-05-19 2:18 ` [PATCH 08/22] OMAP: hwmod: Do not exit the iteration if one clock init failed Paul Walmsley
2010-05-19 2:18 ` [PATCH 09/22] OMAP: hwmod: Rename hwmod name for the MPU Paul Walmsley
2010-05-19 2:18 ` Paul Walmsley [this message]
2010-05-21 10:02 ` [PATCH 10/22] OMAP: hwmod: Replace WARN by pr_warning for clockdomain check Sergei Shtylyov
2010-05-21 10:23 ` Sergei Shtylyov
2010-05-21 10:41 ` Benoit Cousson
2010-05-19 2:18 ` [PATCH 11/22] OMAP4: CM: Remove non-functional registers in ES1.0 Paul Walmsley
2010-05-19 2:18 ` [PATCH 12/22] OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention Paul Walmsley
2010-05-19 2:18 ` [PATCH 13/22] OMAP4: PRCM: Remove duplicate definition of base addresses Paul Walmsley
2010-05-19 2:18 ` [PATCH 14/22] OMAP4: PRCM: Add offset defines for all PRM registers Paul Walmsley
2010-05-19 2:18 ` [PATCH 15/22] OMAP4: PRCM: Add offset defines for all CM registers Paul Walmsley
2010-05-19 2:18 ` [PATCH 16/22] OMAP4 clock: Support clk_set_parent Paul Walmsley
2010-05-19 2:18 ` [PATCH 17/22] OMAP: timers: Fix clock source names for OMAP4 Paul Walmsley
2010-05-19 2:18 ` [PATCH 18/22] OMAP4 powerdomain: Fix pwrsts flags for ALWAYS ON domains Paul Walmsley
2010-05-19 2:19 ` [PATCH 19/22] OMAP3 clock: add support for setting the divider for sys_clkout2 using clk_set_rate Paul Walmsley
2010-05-19 2:19 ` [PATCH 20/22] OMAP4 powerdomain: Support LOWPOWERSTATECHANGE for powerdomains Paul Walmsley
2010-05-19 2:19 ` [PATCH 21/22] OMAP powerdomain, hwmod, omap_device: add some credits Paul Walmsley
2010-05-19 2:19 ` [PATCH 22/22] OMAP2 clock: fix recursive spinlock attempt when CONFIG_CPU_FREQ=y Paul Walmsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100519021848.19716.50002.stgit@localhost.localdomain \
--to=paul@pwsan.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).