* [PATCH] Common plat-s5p updates
@ 2010-05-18 10:23 Marek Szyprowski
2010-05-18 10:23 ` [PATCH 1/2] ARM: Samsung: copy common I2C0 device helpers to machine directories Marek Szyprowski
2010-05-18 10:23 ` [PATCH 2/2] ARM: Samsung: move driver strength gpio configuration helper to common dir Marek Szyprowski
0 siblings, 2 replies; 5+ messages in thread
From: Marek Szyprowski @ 2010-05-18 10:23 UTC (permalink / raw)
To: linux-arm-kernel
Hello,
This patch series contains some core plat-s5p updates, required for both
plat-s5pc1xx cleanup series as well as patches that add Samsung Aquila
board support. This patch series has been rebased onto next-samsung git
tree.
Changes since the previous version:
- updated copyright header in mach-s5pv210/setup-i2c0.c
This patch series has been sent earlier under the 'Common plat-s5p
fixes' thread.
The series contain the following patches:
[PATCH 1/2] ARM: Samsung: copy common I2C0 device helpers to machine directories
[PATCH 2/2] ARM: Samsung: move driver strength gpio configuration helper to common dir
Best regards,
Marek Szyprowski
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/2] ARM: Samsung: copy common I2C0 device helpers to machine directories
2010-05-18 10:23 [PATCH] Common plat-s5p updates Marek Szyprowski
@ 2010-05-18 10:23 ` Marek Szyprowski
2010-05-19 2:26 ` Ben Dooks
2010-05-18 10:23 ` [PATCH 2/2] ARM: Samsung: move driver strength gpio configuration helper to common dir Marek Szyprowski
1 sibling, 1 reply; 5+ messages in thread
From: Marek Szyprowski @ 2010-05-18 10:23 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
arch/arm/mach-s5p6440/Makefile | 1 +
arch/arm/{plat-s5p => mach-s5p6440}/setup-i2c0.c | 2 +-
arch/arm/mach-s5p6442/Makefile | 1 +
arch/arm/{plat-s5p => mach-s5p6442}/setup-i2c0.c | 2 +-
arch/arm/mach-s5pv210/Makefile | 1 +
arch/arm/{plat-s5p => mach-s5pv210}/setup-i2c0.c | 2 +-
arch/arm/plat-s5p/Makefile | 1 -
7 files changed, 6 insertions(+), 4 deletions(-)
copy arch/arm/{plat-s5p => mach-s5p6440}/setup-i2c0.c (92%)
copy arch/arm/{plat-s5p => mach-s5p6442}/setup-i2c0.c (92%)
rename arch/arm/{plat-s5p => mach-s5pv210}/setup-i2c0.c (92%)
diff --git a/arch/arm/mach-s5p6440/Makefile b/arch/arm/mach-s5p6440/Makefile
index 1ad894b..9646cdf 100644
--- a/arch/arm/mach-s5p6440/Makefile
+++ b/arch/arm/mach-s5p6440/Makefile
@@ -13,6 +13,7 @@ obj- :=
# Core support for S5P6440 system
obj-$(CONFIG_CPU_S5P6440) += cpu.o init.o clock.o gpio.o
+obj-$(CONFIG_CPU_S5P6440) += setup-i2c0.o
# machine support
diff --git a/arch/arm/plat-s5p/setup-i2c0.c b/arch/arm/mach-s5p6440/setup-i2c0.c
similarity index 92%
copy from arch/arm/plat-s5p/setup-i2c0.c
copy to arch/arm/mach-s5p6440/setup-i2c0.c
index 67a66e0..69e8a66 100644
--- a/arch/arm/plat-s5p/setup-i2c0.c
+++ b/arch/arm/mach-s5p6440/setup-i2c0.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s5p/setup-i2c0.c
+/* linux/arch/arm/mach-s5p6440/setup-i2c0.c
*
* Copyright (c) 2009 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
diff --git a/arch/arm/mach-s5p6442/Makefile b/arch/arm/mach-s5p6442/Makefile
index dde39a6..4942c14 100644
--- a/arch/arm/mach-s5p6442/Makefile
+++ b/arch/arm/mach-s5p6442/Makefile
@@ -13,6 +13,7 @@ obj- :=
# Core support for S5P6442 system
obj-$(CONFIG_CPU_S5P6442) += cpu.o init.o clock.o
+obj-$(CONFIG_CPU_S5P6442) += setup-i2c0.o
# machine support
diff --git a/arch/arm/plat-s5p/setup-i2c0.c b/arch/arm/mach-s5p6442/setup-i2c0.c
similarity index 92%
copy from arch/arm/plat-s5p/setup-i2c0.c
copy to arch/arm/mach-s5p6442/setup-i2c0.c
index 67a66e0..662695d 100644
--- a/arch/arm/plat-s5p/setup-i2c0.c
+++ b/arch/arm/mach-s5p6442/setup-i2c0.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s5p/setup-i2c0.c
+/* linux/arch/arm/mach-s5p6442/setup-i2c0.c
*
* Copyright (c) 2009 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index 8ebf51c..1a972a5 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -13,6 +13,7 @@ obj- :=
# Core support for S5PV210 system
obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o
+obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o
# machine support
diff --git a/arch/arm/plat-s5p/setup-i2c0.c b/arch/arm/mach-s5pv210/setup-i2c0.c
similarity index 92%
rename from arch/arm/plat-s5p/setup-i2c0.c
rename to arch/arm/mach-s5pv210/setup-i2c0.c
index 67a66e0..9ec6845 100644
--- a/arch/arm/plat-s5p/setup-i2c0.c
+++ b/arch/arm/mach-s5pv210/setup-i2c0.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s5p/setup-i2c0.c
+/* linux/arch/arm/mach-s5pv210/setup-i2c0.c
*
* Copyright (c) 2009 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index a7c54b3..0ec09a9 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -16,4 +16,3 @@ obj-y += dev-uart.o
obj-y += cpu.o
obj-y += clock.o
obj-y += irq.o
-obj-y += setup-i2c0.o
--
1.6.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 2/2] ARM: Samsung: move driver strength gpio configuration helper to common dir
2010-05-18 10:23 [PATCH] Common plat-s5p updates Marek Szyprowski
2010-05-18 10:23 ` [PATCH 1/2] ARM: Samsung: copy common I2C0 device helpers to machine directories Marek Szyprowski
@ 2010-05-18 10:23 ` Marek Szyprowski
2010-05-19 2:18 ` Ben Dooks
1 sibling, 1 reply; 5+ messages in thread
From: Marek Szyprowski @ 2010-05-18 10:23 UTC (permalink / raw)
To: linux-arm-kernel
Driver strength parameter can be changed not only on S5PC100 but also
on S5PV210/S5PC110 platforms, so move the helper functions to the common
plat-samsung directory.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
arch/arm/plat-s5p/Kconfig | 1 +
arch/arm/plat-s5pc1xx/Kconfig | 2 +-
arch/arm/plat-s5pc1xx/Makefile | 1 -
arch/arm/plat-s5pc1xx/gpio-config.c | 62 --------------------
.../plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h | 32 ----------
arch/arm/plat-s5pc1xx/setup-fb-24bpp.c | 1 -
arch/arm/plat-samsung/Kconfig | 12 ++--
arch/arm/plat-samsung/gpio-config.c | 48 +++++++++++++++
arch/arm/plat-samsung/include/plat/gpio-cfg.h | 30 ++++++++++
9 files changed, 86 insertions(+), 103 deletions(-)
delete mode 100644 arch/arm/plat-s5pc1xx/gpio-config.c
delete mode 100644 arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index d400a6a..92bd756 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -13,6 +13,7 @@ config PLAT_S5P
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
select S3C_GPIO_TRACK
+ select S5P_GPIO_DRVSTR
select SAMSUNG_GPIOLIB_4BIT
select S3C_GPIO_CFG_S3C64XX
select S3C_GPIO_PULL_UPDOWN
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
index c7ccdf2..79d3be7 100644
--- a/arch/arm/plat-s5pc1xx/Kconfig
+++ b/arch/arm/plat-s5pc1xx/Kconfig
@@ -16,9 +16,9 @@ config PLAT_S5PC1XX
select SAMSUNG_IRQ_VIC_TIMER
select S3C_GPIO_TRACK
select S3C_GPIO_PULL_UPDOWN
+ select S5P_GPIO_DRVSTR
select S3C_GPIO_CFG_S3C24XX
select S3C_GPIO_CFG_S3C64XX
- select S5P_GPIO_CFG_S5PC1XX
help
Base platform code for any Samsung S5PC1XX device
diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile
index 278f268..66a8f3e 100644
--- a/arch/arm/plat-s5pc1xx/Makefile
+++ b/arch/arm/plat-s5pc1xx/Makefile
@@ -24,7 +24,6 @@ obj-$(CONFIG_CPU_S5PC100_CLOCK) += s5pc100-clock.o
# Device setup
-obj-$(CONFIG_S5P_GPIO_CFG_S5PC1XX) += gpio-config.o
obj-$(CONFIG_S5PC1XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
obj-$(CONFIG_S5PC1XX_SETUP_I2C0) += setup-i2c0.o
obj-$(CONFIG_S5PC1XX_SETUP_I2C1) += setup-i2c1.o
diff --git a/arch/arm/plat-s5pc1xx/gpio-config.c b/arch/arm/plat-s5pc1xx/gpio-config.c
deleted file mode 100644
index a4f67e8..0000000
--- a/arch/arm/plat-s5pc1xx/gpio-config.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/gpio-config.c
- *
- * Copyright 2009 Samsung Electronics
- *
- * S5PC1XX GPIO Configuration.
- *
- * Based on plat-s3c64xx/gpio-config.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg-s5pc1xx.h>
-
-s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off)
-{
- struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
- void __iomem *reg;
- int shift = off * 2;
- u32 drvstr;
-
- if (!chip)
- return -EINVAL;
-
- reg = chip->base + 0x0C;
-
- drvstr = __raw_readl(reg);
- drvstr = 0xffff & (0x3 << shift);
- drvstr = drvstr >> shift;
-
- return (__force s5p_gpio_drvstr_t)drvstr;
-}
-EXPORT_SYMBOL(s5p_gpio_get_drvstr);
-
-int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
- s5p_gpio_drvstr_t drvstr)
-{
- struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
- void __iomem *reg;
- int shift = off * 2;
- u32 tmp;
-
- if (!chip)
- return -EINVAL;
-
- reg = chip->base + 0x0C;
-
- tmp = __raw_readl(reg);
- tmp |= drvstr << shift;
-
- __raw_writel(tmp, reg);
-
- return 0;
-}
-EXPORT_SYMBOL(s5p_gpio_set_drvstr);
diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
deleted file mode 100644
index 72ad59f..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg.h
- *
- * Copyright 2009 Samsung Electronic
- *
- * S5PC1XX Platform - GPIO pin configuration
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* This file contains the necessary definitions to get the basic gpio
- * pin configuration done such as setting a pin to input or output or
- * changing the pull-{up,down} configurations.
- */
-
-#ifndef __GPIO_CFG_S5PC1XX_H
-#define __GPIO_CFG_S5PC1XX_H __FILE__
-
-typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
-
-#define S5P_GPIO_DRVSTR_LV1 0x00
-#define S5P_GPIO_DRVSTR_LV2 0x01
-#define S5P_GPIO_DRVSTR_LV3 0x10
-#define S5P_GPIO_DRVSTR_LV4 0x11
-
-extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off);
-
-extern int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
- s5p_gpio_drvstr_t drvstr);
-
-#endif /* __GPIO_CFG_S5PC1XX_H */
diff --git a/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
index 1a63768..b02c36f 100644
--- a/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
+++ b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
@@ -19,7 +19,6 @@
#include <mach/map.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-s5pc1xx.h>
#define DISR_OFFSET 0x7008
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 287e6f7..6ccfd60 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -90,12 +90,6 @@ config S3C_GPIO_CFG_S3C64XX
Internal configuration to enable S3C64XX style GPIO configuration
functions.
-config S5P_GPIO_CFG_S5PC1XX
- bool
- help
- Internal configuration to enable S5PC1XX style GPIO configuration
- functions.
-
config S3C_GPIO_PULL_UPDOWN
bool
help
@@ -111,6 +105,12 @@ config S3C_GPIO_PULL_UP
help
Internal configuration to enable the correct GPIO pull helper
+config S5P_GPIO_DRVSTR
+ bool
+ help
+ Internal configuration to get and set correct GPIO driver strength
+ helper
+
config SAMSUNG_GPIO_EXTRA
int "Number of additional GPIO pins"
default 0
diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c
index 3282db3..d0e67a2 100644
--- a/arch/arm/plat-samsung/gpio-config.c
+++ b/arch/arm/plat-samsung/gpio-config.c
@@ -261,3 +261,51 @@ s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
}
#endif /* CONFIG_S3C_GPIO_PULL_UP */
+#ifdef CONFIG_S5P_GPIO_DRVSTR
+s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
+{
+ struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+ unsigned int off;
+ void __iomem *reg;
+ int shift;
+ u32 drvstr;
+
+ if (!chip)
+ return -EINVAL;
+
+ off = chip->chip.base - pin;
+ shift = off * 2;
+ reg = chip->base + 0x0C;
+
+ drvstr = __raw_readl(reg);
+ drvstr = 0xffff & (0x3 << shift);
+ drvstr = drvstr >> shift;
+
+ return (__force s5p_gpio_drvstr_t)drvstr;
+}
+EXPORT_SYMBOL(s5p_gpio_get_drvstr);
+
+int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr)
+{
+ struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+ unsigned int off;
+ void __iomem *reg;
+ int shift;
+ u32 tmp;
+
+ if (!chip)
+ return -EINVAL;
+
+ off = chip->chip.base - pin;
+ shift = off * 2;
+ reg = chip->base + 0x0C;
+
+ tmp = __raw_readl(reg);
+ tmp |= drvstr << shift;
+
+ __raw_writel(tmp, reg);
+
+ return 0;
+}
+EXPORT_SYMBOL(s5p_gpio_set_drvstr);
+#endif /* CONFIG_S5P_GPIO_DRVSTR */
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index 8d01e85..34efdd2 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -25,6 +25,7 @@
#define __PLAT_GPIO_CFG_H __FILE__
typedef unsigned int __bitwise__ s3c_gpio_pull_t;
+typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
/* forward declaration if gpio-core.h hasn't been included */
struct s3c_gpio_chip;
@@ -118,4 +119,33 @@ extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
*/
extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
+/* Define values for the drvstr available for each gpio pin.
+ *
+ * These values control the value of the output signal driver strength,
+ * configurable on most pins on the S5C series.
+ */
+#define S5P_GPIO_DRVSTR_LV1 ((__force s5p_gpio_drvstr_t)0x00)
+#define S5P_GPIO_DRVSTR_LV2 ((__force s5p_gpio_drvstr_t)0x01)
+#define S5P_GPIO_DRVSTR_LV3 ((__force s5p_gpio_drvstr_t)0x10)
+#define S5P_GPIO_DRVSTR_LV4 ((__force s5p_gpio_drvstr_t)0x11)
+
+/**
+ * s5c_gpio_get_drvstr() - get the driver streght value of a gpio pin
+ * @pin: The pin number to get the settings for
+ *
+ * Read the driver streght value for the specified pin.
+*/
+extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin);
+
+/**
+ * s3c_gpio_set_drvstr() - set the driver streght value of a gpio pin
+ * @pin: The pin number to configure the driver streght value
+ * @drvstr: The new value of the driver strength
+ *
+ * This function sets the driver strength value for the specified pin.
+ * It will return 0 if successfull, or a negative error code if the pin
+ * cannot support the requested setting.
+*/
+extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr);
+
#endif /* __PLAT_GPIO_CFG_H */
--
1.6.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 2/2] ARM: Samsung: move driver strength gpio configuration helper to common dir
2010-05-18 10:23 ` [PATCH 2/2] ARM: Samsung: move driver strength gpio configuration helper to common dir Marek Szyprowski
@ 2010-05-19 2:18 ` Ben Dooks
0 siblings, 0 replies; 5+ messages in thread
From: Ben Dooks @ 2010-05-19 2:18 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, May 18, 2010 at 12:23:36PM +0200, Marek Szyprowski wrote:
> Driver strength parameter can be changed not only on S5PC100 but also
> on S5PV210/S5PC110 platforms, so move the helper functions to the common
> plat-samsung directory.
ok, will merge onto for-2635-2/s5p-core
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
> arch/arm/plat-s5p/Kconfig | 1 +
> arch/arm/plat-s5pc1xx/Kconfig | 2 +-
> arch/arm/plat-s5pc1xx/Makefile | 1 -
> arch/arm/plat-s5pc1xx/gpio-config.c | 62 --------------------
> .../plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h | 32 ----------
> arch/arm/plat-s5pc1xx/setup-fb-24bpp.c | 1 -
> arch/arm/plat-samsung/Kconfig | 12 ++--
> arch/arm/plat-samsung/gpio-config.c | 48 +++++++++++++++
> arch/arm/plat-samsung/include/plat/gpio-cfg.h | 30 ++++++++++
> 9 files changed, 86 insertions(+), 103 deletions(-)
> delete mode 100644 arch/arm/plat-s5pc1xx/gpio-config.c
> delete mode 100644 arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
>
> diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
> index d400a6a..92bd756 100644
> --- a/arch/arm/plat-s5p/Kconfig
> +++ b/arch/arm/plat-s5p/Kconfig
> @@ -13,6 +13,7 @@ config PLAT_S5P
> select NO_IOPORT
> select ARCH_REQUIRE_GPIOLIB
> select S3C_GPIO_TRACK
> + select S5P_GPIO_DRVSTR
> select SAMSUNG_GPIOLIB_4BIT
> select S3C_GPIO_CFG_S3C64XX
> select S3C_GPIO_PULL_UPDOWN
> diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
> index c7ccdf2..79d3be7 100644
> --- a/arch/arm/plat-s5pc1xx/Kconfig
> +++ b/arch/arm/plat-s5pc1xx/Kconfig
> @@ -16,9 +16,9 @@ config PLAT_S5PC1XX
> select SAMSUNG_IRQ_VIC_TIMER
> select S3C_GPIO_TRACK
> select S3C_GPIO_PULL_UPDOWN
> + select S5P_GPIO_DRVSTR
> select S3C_GPIO_CFG_S3C24XX
> select S3C_GPIO_CFG_S3C64XX
> - select S5P_GPIO_CFG_S5PC1XX
> help
> Base platform code for any Samsung S5PC1XX device
>
> diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile
> index 278f268..66a8f3e 100644
> --- a/arch/arm/plat-s5pc1xx/Makefile
> +++ b/arch/arm/plat-s5pc1xx/Makefile
> @@ -24,7 +24,6 @@ obj-$(CONFIG_CPU_S5PC100_CLOCK) += s5pc100-clock.o
>
> # Device setup
>
> -obj-$(CONFIG_S5P_GPIO_CFG_S5PC1XX) += gpio-config.o
> obj-$(CONFIG_S5PC1XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
> obj-$(CONFIG_S5PC1XX_SETUP_I2C0) += setup-i2c0.o
> obj-$(CONFIG_S5PC1XX_SETUP_I2C1) += setup-i2c1.o
> diff --git a/arch/arm/plat-s5pc1xx/gpio-config.c b/arch/arm/plat-s5pc1xx/gpio-config.c
> deleted file mode 100644
> index a4f67e8..0000000
> --- a/arch/arm/plat-s5pc1xx/gpio-config.c
> +++ /dev/null
> @@ -1,62 +0,0 @@
> -/* linux/arch/arm/plat-s5pc1xx/gpio-config.c
> - *
> - * Copyright 2009 Samsung Electronics
> - *
> - * S5PC1XX GPIO Configuration.
> - *
> - * Based on plat-s3c64xx/gpio-config.c
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> -*/
> -
> -#include <linux/kernel.h>
> -#include <linux/module.h>
> -#include <linux/gpio.h>
> -#include <linux/io.h>
> -
> -#include <plat/gpio-core.h>
> -#include <plat/gpio-cfg-s5pc1xx.h>
> -
> -s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off)
> -{
> - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
> - void __iomem *reg;
> - int shift = off * 2;
> - u32 drvstr;
> -
> - if (!chip)
> - return -EINVAL;
> -
> - reg = chip->base + 0x0C;
> -
> - drvstr = __raw_readl(reg);
> - drvstr = 0xffff & (0x3 << shift);
> - drvstr = drvstr >> shift;
> -
> - return (__force s5p_gpio_drvstr_t)drvstr;
> -}
> -EXPORT_SYMBOL(s5p_gpio_get_drvstr);
> -
> -int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
> - s5p_gpio_drvstr_t drvstr)
> -{
> - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
> - void __iomem *reg;
> - int shift = off * 2;
> - u32 tmp;
> -
> - if (!chip)
> - return -EINVAL;
> -
> - reg = chip->base + 0x0C;
> -
> - tmp = __raw_readl(reg);
> - tmp |= drvstr << shift;
> -
> - __raw_writel(tmp, reg);
> -
> - return 0;
> -}
> -EXPORT_SYMBOL(s5p_gpio_set_drvstr);
> diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
> deleted file mode 100644
> index 72ad59f..0000000
> --- a/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
> +++ /dev/null
> @@ -1,32 +0,0 @@
> -/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg.h
> - *
> - * Copyright 2009 Samsung Electronic
> - *
> - * S5PC1XX Platform - GPIO pin configuration
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> -*/
> -
> -/* This file contains the necessary definitions to get the basic gpio
> - * pin configuration done such as setting a pin to input or output or
> - * changing the pull-{up,down} configurations.
> - */
> -
> -#ifndef __GPIO_CFG_S5PC1XX_H
> -#define __GPIO_CFG_S5PC1XX_H __FILE__
> -
> -typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
> -
> -#define S5P_GPIO_DRVSTR_LV1 0x00
> -#define S5P_GPIO_DRVSTR_LV2 0x01
> -#define S5P_GPIO_DRVSTR_LV3 0x10
> -#define S5P_GPIO_DRVSTR_LV4 0x11
> -
> -extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off);
> -
> -extern int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
> - s5p_gpio_drvstr_t drvstr);
> -
> -#endif /* __GPIO_CFG_S5PC1XX_H */
> diff --git a/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
> index 1a63768..b02c36f 100644
> --- a/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
> +++ b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
> @@ -19,7 +19,6 @@
> #include <mach/map.h>
> #include <plat/fb.h>
> #include <plat/gpio-cfg.h>
> -#include <plat/gpio-cfg-s5pc1xx.h>
>
> #define DISR_OFFSET 0x7008
>
> diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
> index 287e6f7..6ccfd60 100644
> --- a/arch/arm/plat-samsung/Kconfig
> +++ b/arch/arm/plat-samsung/Kconfig
> @@ -90,12 +90,6 @@ config S3C_GPIO_CFG_S3C64XX
> Internal configuration to enable S3C64XX style GPIO configuration
> functions.
>
> -config S5P_GPIO_CFG_S5PC1XX
> - bool
> - help
> - Internal configuration to enable S5PC1XX style GPIO configuration
> - functions.
> -
> config S3C_GPIO_PULL_UPDOWN
> bool
> help
> @@ -111,6 +105,12 @@ config S3C_GPIO_PULL_UP
> help
> Internal configuration to enable the correct GPIO pull helper
>
> +config S5P_GPIO_DRVSTR
> + bool
> + help
> + Internal configuration to get and set correct GPIO driver strength
> + helper
> +
> config SAMSUNG_GPIO_EXTRA
> int "Number of additional GPIO pins"
> default 0
> diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c
> index 3282db3..d0e67a2 100644
> --- a/arch/arm/plat-samsung/gpio-config.c
> +++ b/arch/arm/plat-samsung/gpio-config.c
> @@ -261,3 +261,51 @@ s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
> }
> #endif /* CONFIG_S3C_GPIO_PULL_UP */
>
> +#ifdef CONFIG_S5P_GPIO_DRVSTR
> +s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
> +{
> + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
> + unsigned int off;
> + void __iomem *reg;
> + int shift;
> + u32 drvstr;
> +
> + if (!chip)
> + return -EINVAL;
> +
> + off = chip->chip.base - pin;
> + shift = off * 2;
> + reg = chip->base + 0x0C;
> +
> + drvstr = __raw_readl(reg);
> + drvstr = 0xffff & (0x3 << shift);
> + drvstr = drvstr >> shift;
> +
> + return (__force s5p_gpio_drvstr_t)drvstr;
> +}
> +EXPORT_SYMBOL(s5p_gpio_get_drvstr);
> +
> +int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr)
> +{
> + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
> + unsigned int off;
> + void __iomem *reg;
> + int shift;
> + u32 tmp;
> +
> + if (!chip)
> + return -EINVAL;
> +
> + off = chip->chip.base - pin;
> + shift = off * 2;
> + reg = chip->base + 0x0C;
> +
> + tmp = __raw_readl(reg);
> + tmp |= drvstr << shift;
> +
> + __raw_writel(tmp, reg);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(s5p_gpio_set_drvstr);
> +#endif /* CONFIG_S5P_GPIO_DRVSTR */
I'm going to merge this, however I may end up adding some locking from
the gpio updates that are in the current pendign tree.
> diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
> index 8d01e85..34efdd2 100644
> --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
> +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
> @@ -25,6 +25,7 @@
> #define __PLAT_GPIO_CFG_H __FILE__
>
> typedef unsigned int __bitwise__ s3c_gpio_pull_t;
> +typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
>
> /* forward declaration if gpio-core.h hasn't been included */
> struct s3c_gpio_chip;
> @@ -118,4 +119,33 @@ extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
> */
> extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
>
> +/* Define values for the drvstr available for each gpio pin.
> + *
> + * These values control the value of the output signal driver strength,
> + * configurable on most pins on the S5C series.
> + */
> +#define S5P_GPIO_DRVSTR_LV1 ((__force s5p_gpio_drvstr_t)0x00)
> +#define S5P_GPIO_DRVSTR_LV2 ((__force s5p_gpio_drvstr_t)0x01)
> +#define S5P_GPIO_DRVSTR_LV3 ((__force s5p_gpio_drvstr_t)0x10)
> +#define S5P_GPIO_DRVSTR_LV4 ((__force s5p_gpio_drvstr_t)0x11)
> +
> +/**
> + * s5c_gpio_get_drvstr() - get the driver streght value of a gpio pin
> + * @pin: The pin number to get the settings for
> + *
> + * Read the driver streght value for the specified pin.
> +*/
> +extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin);
> +
> +/**
> + * s3c_gpio_set_drvstr() - set the driver streght value of a gpio pin
> + * @pin: The pin number to configure the driver streght value
> + * @drvstr: The new value of the driver strength
> + *
> + * This function sets the driver strength value for the specified pin.
> + * It will return 0 if successfull, or a negative error code if the pin
> + * cannot support the requested setting.
> +*/
> +extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr);
> +
> #endif /* __PLAT_GPIO_CFG_H */
> --
> 1.6.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
--
Ben
Q: What's a light-year?
A: One-third less calories than a regular year.
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/2] ARM: Samsung: copy common I2C0 device helpers to machine directories
2010-05-18 10:23 ` [PATCH 1/2] ARM: Samsung: copy common I2C0 device helpers to machine directories Marek Szyprowski
@ 2010-05-19 2:26 ` Ben Dooks
0 siblings, 0 replies; 5+ messages in thread
From: Ben Dooks @ 2010-05-19 2:26 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, May 18, 2010 at 12:23:35PM +0200, Marek Szyprowski wrote:
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
ok, will apply this with the condition that was think about
the proliferation of similar platform devices throughout the
system.
> ---
> arch/arm/mach-s5p6440/Makefile | 1 +
> arch/arm/{plat-s5p => mach-s5p6440}/setup-i2c0.c | 2 +-
> arch/arm/mach-s5p6442/Makefile | 1 +
> arch/arm/{plat-s5p => mach-s5p6442}/setup-i2c0.c | 2 +-
> arch/arm/mach-s5pv210/Makefile | 1 +
> arch/arm/{plat-s5p => mach-s5pv210}/setup-i2c0.c | 2 +-
> arch/arm/plat-s5p/Makefile | 1 -
> 7 files changed, 6 insertions(+), 4 deletions(-)
> copy arch/arm/{plat-s5p => mach-s5p6440}/setup-i2c0.c (92%)
> copy arch/arm/{plat-s5p => mach-s5p6442}/setup-i2c0.c (92%)
> rename arch/arm/{plat-s5p => mach-s5pv210}/setup-i2c0.c (92%)
>
> diff --git a/arch/arm/mach-s5p6440/Makefile b/arch/arm/mach-s5p6440/Makefile
> index 1ad894b..9646cdf 100644
> --- a/arch/arm/mach-s5p6440/Makefile
> +++ b/arch/arm/mach-s5p6440/Makefile
> @@ -13,6 +13,7 @@ obj- :=
> # Core support for S5P6440 system
>
> obj-$(CONFIG_CPU_S5P6440) += cpu.o init.o clock.o gpio.o
> +obj-$(CONFIG_CPU_S5P6440) += setup-i2c0.o
>
> # machine support
>
> diff --git a/arch/arm/plat-s5p/setup-i2c0.c b/arch/arm/mach-s5p6440/setup-i2c0.c
> similarity index 92%
> copy from arch/arm/plat-s5p/setup-i2c0.c
> copy to arch/arm/mach-s5p6440/setup-i2c0.c
> index 67a66e0..69e8a66 100644
> --- a/arch/arm/plat-s5p/setup-i2c0.c
> +++ b/arch/arm/mach-s5p6440/setup-i2c0.c
> @@ -1,4 +1,4 @@
> -/* linux/arch/arm/plat-s5p/setup-i2c0.c
> +/* linux/arch/arm/mach-s5p6440/setup-i2c0.c
> *
> * Copyright (c) 2009 Samsung Electronics Co., Ltd.
> * http://www.samsung.com/
> diff --git a/arch/arm/mach-s5p6442/Makefile b/arch/arm/mach-s5p6442/Makefile
> index dde39a6..4942c14 100644
> --- a/arch/arm/mach-s5p6442/Makefile
> +++ b/arch/arm/mach-s5p6442/Makefile
> @@ -13,6 +13,7 @@ obj- :=
> # Core support for S5P6442 system
>
> obj-$(CONFIG_CPU_S5P6442) += cpu.o init.o clock.o
> +obj-$(CONFIG_CPU_S5P6442) += setup-i2c0.o
>
> # machine support
>
> diff --git a/arch/arm/plat-s5p/setup-i2c0.c b/arch/arm/mach-s5p6442/setup-i2c0.c
> similarity index 92%
> copy from arch/arm/plat-s5p/setup-i2c0.c
> copy to arch/arm/mach-s5p6442/setup-i2c0.c
> index 67a66e0..662695d 100644
> --- a/arch/arm/plat-s5p/setup-i2c0.c
> +++ b/arch/arm/mach-s5p6442/setup-i2c0.c
> @@ -1,4 +1,4 @@
> -/* linux/arch/arm/plat-s5p/setup-i2c0.c
> +/* linux/arch/arm/mach-s5p6442/setup-i2c0.c
> *
> * Copyright (c) 2009 Samsung Electronics Co., Ltd.
> * http://www.samsung.com/
> diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
> index 8ebf51c..1a972a5 100644
> --- a/arch/arm/mach-s5pv210/Makefile
> +++ b/arch/arm/mach-s5pv210/Makefile
> @@ -13,6 +13,7 @@ obj- :=
> # Core support for S5PV210 system
>
> obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o
> +obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o
>
> # machine support
>
> diff --git a/arch/arm/plat-s5p/setup-i2c0.c b/arch/arm/mach-s5pv210/setup-i2c0.c
> similarity index 92%
> rename from arch/arm/plat-s5p/setup-i2c0.c
> rename to arch/arm/mach-s5pv210/setup-i2c0.c
> index 67a66e0..9ec6845 100644
> --- a/arch/arm/plat-s5p/setup-i2c0.c
> +++ b/arch/arm/mach-s5pv210/setup-i2c0.c
> @@ -1,4 +1,4 @@
> -/* linux/arch/arm/plat-s5p/setup-i2c0.c
> +/* linux/arch/arm/mach-s5pv210/setup-i2c0.c
> *
> * Copyright (c) 2009 Samsung Electronics Co., Ltd.
> * http://www.samsung.com/
> diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
> index a7c54b3..0ec09a9 100644
> --- a/arch/arm/plat-s5p/Makefile
> +++ b/arch/arm/plat-s5p/Makefile
> @@ -16,4 +16,3 @@ obj-y += dev-uart.o
> obj-y += cpu.o
> obj-y += clock.o
> obj-y += irq.o
> -obj-y += setup-i2c0.o
> --
> 1.6.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
--
Ben
Q: What's a light-year?
A: One-third less calories than a regular year.
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2010-05-19 2:26 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-05-18 10:23 [PATCH] Common plat-s5p updates Marek Szyprowski
2010-05-18 10:23 ` [PATCH 1/2] ARM: Samsung: copy common I2C0 device helpers to machine directories Marek Szyprowski
2010-05-19 2:26 ` Ben Dooks
2010-05-18 10:23 ` [PATCH 2/2] ARM: Samsung: move driver strength gpio configuration helper to common dir Marek Szyprowski
2010-05-19 2:18 ` Ben Dooks
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).