[PATCH 01/20] mtd: pxa3xx_nand: refuse the flash definition get from platform

[marek.vasut@gmail.com (Marek Vasut)]

Dne ?t 25. kv?tna 2010 12:21:46 Mike Rapoport napsal(a):
> Lei Wen wrote:
> > On Mon, May 24, 2010 at 9:21 PM, Mike Rapoport <mike@compulab.co.il> wrote:
> >> Lei Wen wrote:
> >>> Hi Mike,
> >>> 
> >>> On Mon, May 24, 2010 at 7:00 PM, Mike Rapoport <mike@compulab.co.il>
> >>> 
> >>> wrote:
> >>>> Hi Lei,
> >>>> 
> >>>> Lei Wen wrote:
> >>>>> Hi Mike,
> >>>> 
> >>>> 2) I don't like hadrcoding of NAND parameters into the driver. You
> >>>> remove *deprecetad* CONFIG_MTD_NAND_PXA3xx_BUILTIN configuration
> >>>> option and instead
> >>>> you enforce use of built-in definitions. The driver in its current
> >>>> state is
> >>>> robust enough to allow platforms to define optimized NAND timings
> >>>> either in
> >>>> the bootloader or in the kernel. If you don't like that multiple
> >>>> platforms
> >>>> define the same flash chip create an enumeration of built-in types and
> >>>> let
> >>>> platforms to use this enumeration to select the NAND chip. But,
> >>>> anyway, there should be a fallback mode that will support NAND chips
> >>>> that are not defined in the driver, probably with suboptimal timings.
> >>> 
> >>> Original driver also use hardcoding. And in bootloader, this timing
> >>> parameter is also hard coding.
> >>> We cannot deduce a parameter set only from the nand id, that is why we
> >>> need a table to preset it.
> >>> If one nand chip is not listed in that table, the chip id would still
> >>> be printed out, so that we can do something for that.
> >>> If we encourage people to continue on this, we would not able to
> >>> really "driver" that nand.
> >> 
> >> Currently pxa3xx-nand has three operational modes:
> >> - use NAND parameters supplied by the platform
> >> - use presets configured by the bootloader chain
> >> - use built-in NAND parameters, marked as deprecated in favor of the
> >> first two
> >> You remove the first two modes completely and require that each and
> >> every NAND chip used on pxa3xx based platform will be added to the
> >> driver. This way you make the driver less robust and harder to use for
> >> platform developers, not mentioning you're breaking the existing
> >> platforms. In my opinion, the driver *may* support built-in definitions
> >> for certain NAND flashes and *must* support configuration of the NAND
> >> parameters by the platform code and bootloader.
> > 
> > Hi Mike,
> > 
> > Well... I would submit another patch set which would reserve a way
> > that platform could pass its parameter setting.
> > Like specify the certain type of nand chip parameter for each chip
> > select. Is that ok for you?
> > 
> > For bootloader pass parameter method, I think this way should be
> > dropped... For there is attributed which we could not tell from
> > registers...
> > What do you think of this?
> 
> Can you please elaborate what are the attributes that cannot be detected?

MFPR drive strength maybe ? That's none of kernel's concern (as of now).
> 
> > Thanks,
> > Lei