From mboxrd@z Thu Jan  1 00:00:00 1970
From: linux@arm.linux.org.uk (Russell King - ARM Linux)
Date: Tue, 25 May 2010 21:24:47 +0100
Subject: vpack270 and sleep mode
In-Reply-To: <4BFBD01E.8010101@papillon.ru>
References: <1272311167-576-1-git-send-email-marek.vasut@gmail.com>
	<4BFBBECD.70803@papillon.ru>
	<201005251438.09494.marek.vasut@gmail.com>
	<201005251439.50508.marek.vasut@gmail.com>
	<4BFBD01E.8010101@papillon.ru>
Message-ID: <20100525202447.GD16204@n2100.arm.linux.org.uk>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Tue, May 25, 2010 at 07:26:54PM +0600, 237 Rumjantsev Egor (PROG) wrote:
> Unable to handle kernel paging request at virtual address a03ab26f
> pgd = c7b10000
> [a03ab26f] *pgd=8020040e(bad)
> Internal error: Oops: 803 [#1] PREEMPT
> Modules linked in: ipv6 pxa_reg
> CPU: 0    Not tainted  (2.6.28.10-vpac3-splash #90)
> PC is at bad_channel+0x80166/0x91f28
> LR is at platform_pm_resume_noirq+0x48/0x54

My guess is that some platform driver hasn't been properly updated,
and was registered using driver_register() rather than
platform_driver_register().

Check your platform drivers to make sure that they're properly up to
date.