linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: ben-linux@fluff.org (Ben Dooks)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/4] usb: s3c-hsotg: Enable HCLK for the OTG module.
Date: Fri, 28 May 2010 11:22:32 +0100	[thread overview]
Message-ID: <20100528102232.GZ4720@trinity.fluff.org> (raw)
In-Reply-To: <1275014477-23133-5-git-send-email-kgene.kim@samsung.com>

On Fri, May 28, 2010 at 11:41:17AM +0900, Kukjin Kim wrote:
> From: Thomas Abraham <thomas.ab@samsung.com>
> 
> This patch modifies the following in S3C hsotg driver.
> 
> 1. Gets a reference to the USB OTG hclk clock and enables it. This is
>    required for plaforms on which the USB OTG hclk is disabled during
>    the boot time clock intialization.
> 
> 2. Add necessary clock clean up in case of error during initialization
>    failure or during module unload.
> 
> 3. Add a new field 'clk_otg' in 'struct s3c_hsotg' to maintain a
>    reference to the USB OTG hclk clock.
> 
> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
> ---
>  drivers/usb/gadget/s3c-hsotg.c |   17 +++++++++++++++++
>  1 files changed, 17 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
> index 81c47d2..526d081 100644
> --- a/drivers/usb/gadget/s3c-hsotg.c
> +++ b/drivers/usb/gadget/s3c-hsotg.c
> @@ -130,6 +130,7 @@ struct s3c_hsotg_ep {
>   * @dev: The parent device supplied to the probe function
>   * @driver: USB gadget driver
>   * @plat: The platform specific configuration data.
> + * @clk_otg: The hclk for otg module.
>   * @regs: The memory area mapped for accessing registers.
>   * @regs_res: The resource that was allocated when claiming register space.
>   * @irq: The IRQ number we are using
> @@ -147,6 +148,7 @@ struct s3c_hsotg {
>  	struct device		 *dev;
>  	struct usb_gadget_driver *driver;
>  	struct s3c_hsotg_plat	 *plat;
> +	struct clk		 *clk_otg;
>  
>  	void __iomem		*regs;
>  	struct resource		*regs_res;
> @@ -3269,6 +3271,14 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
>  		goto err_regs_res;
>  	}
>  
> +	hsotg->clk_otg = clk_get(&pdev->dev, "otg");
> +	if (IS_ERR(hsotg->clk_otg)) {
> +		dev_err(dev, "failed to find usb otg clock source\n");
> +		ret = -ENODEV;

hmm, -ENODEV isn't really the right error to return here, it'll
get silently ignored by the device core.

> +		goto err_noclk;
> +	}
> +	clk_enable(hsotg->clk_otg);
> +
>  	ret = platform_get_irq(pdev, 0);
>  	if (ret < 0) {
>  		dev_err(dev, "cannot find IRQ\n");
> @@ -3330,6 +3340,10 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
>  	return 0;
>  
>  err_regs:
> +	clk_disable(hsotg->clk_otg);
> +	clk_put(hsotg->clk_otg);
> +
> +err_noclk:
>  	iounmap(hsotg->regs);
>  
>  err_regs_res:
> @@ -3352,6 +3366,9 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev)
>  	free_irq(hsotg->irq, hsotg);
>  	iounmap(hsotg->regs);
>  
> +	clk_disable(hsotg->clk_otg);
> +	clk_put(hsotg->clk_otg);
> +
>  	release_resource(hsotg->regs_res);
>  	kfree(hsotg->regs_res);
>  
> -- 
> 1.6.3.3
> 

-- 
-- 
Ben

Q:      What's a light-year?
A:      One-third less calories than a regular year.

  parent reply	other threads:[~2010-05-28 10:22 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-05-28  2:41 [PATCH] Updates for S3C HSOTG driver Kukjin Kim
2010-05-28  2:41 ` [PATCH 1/4] ARM: S3C64XX: Add USB OTG HCLK to the list of clocks Kukjin Kim
2010-05-28  2:41 ` [PATCH 2/4] ARM: S5PV210: Assign clock rate for clk_xusbxti clock Kukjin Kim
2010-05-28  7:10   ` Ben Dooks
2010-05-28  2:41 ` [PATCH 3/4] ARM: S5P: Add clk_xusbxti clock to the list of clocks to be registered Kukjin Kim
2010-05-28  2:41 ` [PATCH 4/4] usb: s3c-hsotg: Enable HCLK for the OTG module Kukjin Kim
2010-05-28  3:58   ` Ben Dooks
2010-05-28 10:22   ` Ben Dooks [this message]
2010-05-28 10:48     ` Sergei Shtylyov
2010-05-31  0:39       ` Ben Dooks

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100528102232.GZ4720@trinity.fluff.org \
    --to=ben-linux@fluff.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).