[PATCH 4/4] mx35: add flexcan devices

[hjk@linutronix.de (Hans J. Koch)]

On Fri, May 28, 2010 at 01:42:18PM +0200, Marc Kleine-Budde wrote:
> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
> ---
>  arch/arm/mach-mx3/devices.c |   40 ++++++++++++++++++++++++++++++++++++++++
>  arch/arm/mach-mx3/devices.h |    2 ++
>  2 files changed, 42 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
> index db7acd6..0e1e20b 100644
> --- a/arch/arm/mach-mx3/devices.c
> +++ b/arch/arm/mach-mx3/devices.c
> @@ -127,6 +127,46 @@ struct platform_device mxc_uart_device4 = {
>  };
>  #endif /* CONFIG_ARCH_MX31 */
>  
> +#ifdef CONFIG_ARCH_MX35
> +static struct resource mxc_can_1_resources[] = {
> +	{
> +		.start	= 0x53fe4000,
> +		.end	= 0x53fe7fff,
> +		.flags	= IORESOURCE_MEM,
> +	}, {
> +		.start	= 43,
> +		.end	= 43,
> +		.flags	= IORESOURCE_IRQ,
> +	}
> +};
> +
> +struct platform_device mxc_can_device0 = {
> +	.name = "flexcan",

Did you also post the flexcan driver itself somewhere? I've got such a device
on my desk right now, and would be willing to test that. I've made some tests
with Sascha's old version, but it's not really satisfying...

Thanks,
Hans