From: marek.vasut@gmail.com (Marek Vasut)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/5] [ARM] Auto calculate ZRELADDR and provide option for exceptions
Date: Mon, 7 Jun 2010 17:12:20 +0200 [thread overview]
Message-ID: <201006071712.20888.marek.vasut@gmail.com> (raw)
In-Reply-To: <1275550613-9553-5-git-send-email-eric.miao@canonical.com>
Dne ?t 3. ?ervna 2010 09:36:52 Eric Miao napsal(a):
> From: Eric Miao <eric.y.miao@gmail.com>
>
> Original idea and prototype came from Nicolas Pitre.
>
> As long as the zImage is placed within the 256MB range from the
> start of the memory, ZRELADDR (Address where the decompressed
> kernel will be placed, usually == PHYS_OFFSET + TEXT_OFFSET)
> can be determined at run-time by masking PC with 0xf000_0000.
>
> Running through all the Makefile.boot, all those zreladdr-y
> address == 0x[0-f]000_0000 + TEXT_OFFSET can be determined at
> run-time.
>
> Option CONFIG_AUTO_ZRELADDR and CONFIG_ZRELADDR are introduced,
> CONFIG_ZRELADDR _must_ be explicitly specified if:
>
> - ((zreladdr-y - TEXT_OFFSET) & ~0xf0000000) != 0, which means
> a maksing of PC with 0xf000_0000 will result an incorrect
> address.
>
> - or the assumption of the zImage being loaded by the boot
> loader within 256MB from the start address is simply
> incorrect
>
> - or when ZBOOT_ROM is used, where the above assumption is
> normally wrong
>
> List of all Makefile.boot:
>
> Hardcoded, and can be auto calculated by masking PC with 0xf000_0000:
>
> arch/arm/mach-cns3xxx/Makefile.boot: zreladdr-y := 0x00008000
> arch/arm/mach-dove/Makefile.boot: zreladdr-y := 0x00008000
> arch/arm/mach-ebsa110/Makefile.boot: zreladdr-y := 0x00008000
> arch/arm/mach-footbridge/Makefile.boot: zreladdr-y := 0x00008000
> arch/arm/mach-integrator/Makefile.boot: zreladdr-y := 0x00008000
> arch/arm/mach-iop13xx/Makefile.boot: zreladdr-y := 0x00008000
> arch/arm/mach-iop33x/Makefile.boot: zreladdr-y := 0x00008000
> arch/arm/mach-ixp2000/Makefile.boot: zreladdr-y := 0x00008000
> arch/arm/mach-ixp23xx/Makefile.boot: zreladdr-y := 0x00008000
> arch/arm/mach-ixp4xx/Makefile.boot: zreladdr-y := 0x00008000
> arch/arm/mach-kirkwood/Makefile.boot: zreladdr-y := 0x00008000
> arch/arm/mach-ks8695/Makefile.boot: zreladdr-y := 0x00008000
> arch/arm/mach-loki/Makefile.boot: zreladdr-y := 0x00008000
> arch/arm/mach-mmp/Makefile.boot: zreladdr-y := 0x00008000
> arch/arm/mach-mv78xx0/Makefile.boot: zreladdr-y := 0x00008000
> arch/arm/mach-nomadik/Makefile.boot: zreladdr-y := 0x00008000
> arch/arm/mach-nuc93x/Makefile.boot: zreladdr-y := 0x00008000
> arch/arm/mach-ns9xxx/Makefile.boot: zreladdr-y := 0x8000
> arch/arm/mach-orion5x/Makefile.boot: zreladdr-y := 0x00008000
> arch/arm/mach-spear3xx/Makefile.boot: zreladdr-y := 0x00008000
> arch/arm/mach-spear6xx/Makefile.boot: zreladdr-y := 0x00008000
> arch/arm/mach-ux500/Makefile.boot: zreladdr-y := 0x00008000
> arch/arm/mach-versatile/Makefile.boot: zreladdr-y := 0x00008000
> arch/arm/mach-w90x900/Makefile.boot: zreladdr-y := 0x00008000
> arch/arm/mach-msm/Makefile.boot: zreladdr-y := 0x10008000
> arch/arm/mach-omap1/Makefile.boot: zreladdr-y := 0x10008000
> arch/arm/mach-rpc/Makefile.boot: zreladdr-y := 0x10008000
> arch/arm/mach-s5p6440/Makefile.boot: zreladdr-y := 0x20008000
> arch/arm/mach-s5p6442/Makefile.boot: zreladdr-y := 0x20008000
> arch/arm/mach-s5pc100/Makefile.boot: zreladdr-y := 0x20008000
> arch/arm/mach-s5pv210/Makefile.boot: zreladdr-y := 0x20008000
> arch/arm/mach-s3c2410/Makefile.boot: zreladdr-y := 0x30008000
> arch/arm/mach-s3c2410/Makefile.boot: zreladdr-y := 0x30108000
> arch/arm/mach-stmp378x/Makefile.boot: zreladdr-y := 0x40008000
> arch/arm/mach-stmp37xx/Makefile.boot: zreladdr-y := 0x40008000
> arch/arm/mach-s3c64xx/Makefile.boot: zreladdr-y := 0x50008000
> arch/arm/mach-vexpress/Makefile.boot: zreladdr-y := 0x60008000
> arch/arm/mach-mx25/Makefile.boot: zreladdr-y := 0x80008000
> arch/arm/mach-mx3/Makefile.boot: zreladdr-y := 0x80008000
> arch/arm/mach-netx/Makefile.boot: zreladdr-y := 0x80008000
> arch/arm/mach-omap2/Makefile.boot: zreladdr-y := 0x80008000
> arch/arm/mach-pnx4008/Makefile.boot: zreladdr-y := 0x80008000
> arch/arm/mach-mx5/Makefile.boot: zreladdr-y := 0x90008000
> arch/arm/mach-mxc91231/Makefile.boot: zreladdr-y := 0x90008000
> arch/arm/mach-iop32x/Makefile.boot: zreladdr-y := 0xa0008000
> arch/arm/mach-pxa/Makefile.boot: zreladdr-y := 0xa0008000
> arch/arm/mach-lh7a40x/Makefile.boot: zreladdr-y := 0xc0008000
> arch/arm/mach-clps711x/Makefile.boot: zreladdr-y := 0xc0028000
> arch/arm/mach-aaec2000/Makefile.boot: zreladdr-y := 0xf0008000
> arch/arm/mach-l7200/Makefile.boot: zreladdr-y := 0xf0008000
>
> Depends on other options/macros, but still can be auto calculated by
> masking PC with 0xf000_0000:
>
> arch/arm/mach-bcmring/Makefile.boot: zreladdr-y :=
> $(CONFIG_BCM_ZRELADDR) * refer to
> arch/arm/configs/bcmring_defconfig:CONFIG_BCM_ZRELADDR=0x8000
> arch/arm/mach-h720x/Makefile.boot: zreladdr-$(CONFIG_ARCH_H720X) :=
> 0x40008000 arch/arm/mach-shmobile/Makefile.boot: zreladdr-y :=
> $(__ZRELADDR) * __ZRELADDR depends on CONFIG_MEMORY_START
> arch/arm/configs/ap4evb_defconfig: CONFIG_MEMORY_START=0x40000000 (SH7372)
> arch/arm/configs/g3evm_defconfig: CONFIG_MEMORY_START=0x50000000 (SH7367)
> arch/arm/configs/g4evm_defconfig: CONFIG_MEMORY_START=0x40000000 (SH7377)
>
> arch/arm/mach-at91/Makefile.boot: zreladdr-y := 0x70008000
> (CONFIG_ARCH_AT91CAP9) arch/arm/mach-at91/Makefile.boot: zreladdr-y
:=
> 0x70008000 (CONFIG_ARCH_AT91SAM9G45) arch/arm/mach-at91/Makefile.boot:
> zreladdr-y := 0x20008000 (CONFIG_ARCH_AT91)
> arch/arm/mach-davinci/Makefile.boot: zreladdr-y := 0xc0008000
> (CONFIG_ARCH_DAVINCI_DA8XX) arch/arm/mach-davinci/Makefile.boot:
> zreladdr-y := 0x80008000 (!CONFIG_ARCH_DAVINCI_DA8XX)
> arch/arm/mach-ep93xx/Makefile.boot:
> zreladdr-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00008000
> arch/arm/mach-ep93xx/Makefile.boot:
> zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0008000
> arch/arm/mach-ep93xx/Makefile.boot:
> zreladdr-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) := 0xd0008000
> arch/arm/mach-ep93xx/Makefile.boot:
> zreladdr-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) := 0xe0008000
> arch/arm/mach-ep93xx/Makefile.boot:
> zreladdr-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) := 0xf0008000
> arch/arm/mach-gemini/Makefile.boot: zreladdr-y := 0x00008000
> (CONFIG_GEMINI_MEM_SWAP) arch/arm/mach-gemini/Makefile.boot:
> zreladdr-y := 0x10008000 (!CONFIG_GEMINI_MEM_SWAP)
> arch/arm/mach-mx2/Makefile.boot: zreladdr-$(CONFIG_MACH_MX21) :=
> 0xC0008000 arch/arm/mach-mx2/Makefile.boot:
> zreladdr-$(CONFIG_MACH_MX27) := 0xA0008000
> arch/arm/mach-realview/Makefile.boot: zreladdr-y := 0x70008000
> (CONFIG_REALVIEW_HIGH_PHYS_OFFSET) arch/arm/mach-realview/Makefile.boot:
> zreladdr-y := 0x00008000 (CONFIG_REALVIEW_HIGH_PHYS_OFFSET)
> arch/arm/mach-sa1100/Makefile.boot: zreladdr-y := 0xc0008000
> arch/arm/mach-sa1100/Makefile.boot: zreladdr-$(CONFIG_SA1111) :=
> 0xc0208000
>
> Machines where ZRELADDR cannot be auto calcuated:
>
> arch/arm/mach-mx1/Makefile.boot: zreladdr-y := 0x08008000
> arch/arm/mach-shark/Makefile.boot: zreladdr-y := 0x08008000
> arch/arm/mach-u300/Makefile.boot: zreladdr-y := 0x28E08000
> arch/arm/mach-u300/Makefile.boot: zreladdr-y := 0x48008000
>
> Signed-off-by: Eric Miao <eric.miao@canonical.com>
> ---
> arch/arm/Kconfig | 63
> +++++++++++++++++++++++++++++++++++++ arch/arm/boot/Makefile |
> 10 +++---
> arch/arm/boot/compressed/Makefile | 4 +-
> arch/arm/boot/compressed/head.S | 12 +++++--
> 4 files changed, 79 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index e340193..818f731 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -1497,6 +1497,69 @@ config TEXT_OFFSET
> TEXT_OFFSET is the offset of the decompressed kernel image from
> memory start. Currently, it is expected the least significant 16
> bits to be 0x8000, so to leave space for the initial page table.
> +
> +config AUTO_ZRELADDR
> + bool "Auto calculation of the decompressed kernel image address"
> + depends on !ZBOOT_ROM && !(ARCH_MX1 || ARCH_SHARK || ARCH_U300)
> + help
> + ZRELADDR is the physical address where the decompressed kernel
> + image will be placed. If AUTO_ZRELADDR is selected, the address
> + will be determined at run-time by masking the current IP with
> + 0xf000_0000. This assumes the zImage being placed in the 256MB
> + range from the start of memory.
> +
> +config ZRELADDR
> + hex "Physical address of the decompressed kernel image"
> + depends on !AUTO_ZRELADDR
> + default 0x00008000 if ARCH_BCMRING || ARCH_CNS3XXX || ARCH_DOVE ||\
> + ARCH_EBSA110 || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR
||\
> + ARCH_IOP13XX || ARCH_IOP33X || ARCH_IXP2000 ||\
> + ARCH_IXP23XX || ARCH_IXP4XX || ARCH_KIRKWOOD ||\
> + ARCH_KS8695 || ARCH_LOKI || ARCH_MMP ||
ARCH_MV78XX0 ||\
> + ARCH_NOMADIK || ARCH_NUC93X || ARCH_NS9XXX ||\
> + ARCH_ORION5X || ARCH_SPEAR3XX || ARCH_SPEAR6XX ||\
> + ARCH_UX5XX || ARCH_VERSATILE || ARCH_W90X900
> + default 0x08008000 if ARCH_MX1 || ARCH_SHARK
> + default 0x10008000 if ARCH_MSM || ARCH_OMAP1 || ARCH_RPC
> + default 0x20008000 if ARCH_S5P6440 || ARCH_S5P6442 ||\
> + ARCH_S5PC100 || ARCH_S5PV210
> + default 0x30008000 if ARCH_S3C2410 || ARCH_S3C2400 || ARCH_S3C2412 ||\
> + ARCH_S3C2416 || ARCH_S3C2440 || ARCH_S3C2443
> + default 0x40008000 if ARCH_STMP378X || ARCH_STMP37XX || ARCH_SH7372 ||\
> + ARCH_SH7377
> + default 0x50008000 if ARCH_S3C64XX || ARCH_SH7367
> + default 0x60008000 if ARCH_VEXPRESS
> + default 0x80008000 if ARCH_MX25 || ARCH_MX3 || ARCH_NETX ||\
> + ARCH_OMAP2 || ARCH_PNX4008
> + default 0x90008000 if ARCH_MX5 || ARCH_MX91231
> + default 0xa0008000 if ARCH_IOP32X || ARCH_PXA || MACH_MX27
> + default 0xc0008000 if ARCH_LH7A40X || MACH_MX21
> + default 0xf0008000 if ARCH_AAEC2000 || ARCH_L7200
> + default 0xc0028000 if ARCH_CLPS711X
> + default 0x70008000 if ARCH_AT91 && (ARCH_AT91CAP9 || ARCH_AT91SAM9G45)
> + default 0x20008000 if ARCH_AT91 && !(ARCH_AT91CAP9 || ARCH_AT91SAM9G45)
> + default 0xc0008000 if ARCH_DAVINCI && ARCH_DAVINCI_DA8XX
> + default 0x80008000 if ARCH_DAVINCI && !ARCH_DAVINCI_DA8XX
> + default 0x00008000 if ARCH_EP93XX && EP93XX_SDCE3_SYNC_PHYS_OFFSET
> + default 0xc0008000 if ARCH_EP93XX && EP93XX_SDCE0_PHYS_OFFSET
> + default 0xd0008000 if ARCH_EP93XX && EP93XX_SDCE1_PHYS_OFFSET
> + default 0xe0008000 if ARCH_EP93XX && EP93XX_SDCE2_PHYS_OFFSET
> + default 0xf0008000 if ARCH_EP93XX && EP93XX_SDCE3_ASYNC_PHYS_OFFSET
> + default 0x00008000 if ARCH_GEMINI && GEMINI_MEM_SWAP
> + default 0x10008000 if ARCH_GEMINI && !GEMINI_MEM_SWAP
> + default 0x70008000 if ARCH_REALVIEW && REALVIEW_HIGH_PHYS_OFFSET
> + default 0x00008000 if ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET
> + default 0xc0208000 if ARCH_SA1100 && SA1111
> + default 0xc0008000 if ARCH_SA1100 && !SA1111
> + default 0x30108000 if ARCH_S3C2410 && PM_H1940
> + default 0x28E08000 if ARCH_U300 && MACH_U300_SINGLE_RAM
> + default 0x48008000 if ARCH_U300 && !MACH_U300_SINGLE_RAM
> + help
> + ZRELADDR is the physical address where the decompressed kernel
> + image will be placed. ZRELADDR has to be specified when the
> + assumption of AUTO_ZRELADDR is not valid, or when ZBOOT_ROM is
> + selected.
> +
> endmenu
>
Hi,
what about the PXA based devices, where RAM begins at 0x80000000 ?
Cheers
> menu "CPU Power Management"
> diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
> index 4a590f4..8cc4669 100644
> --- a/arch/arm/boot/Makefile
> +++ b/arch/arm/boot/Makefile
> @@ -14,18 +14,16 @@
> MKIMAGE := $(srctree)/scripts/mkuboot.sh
>
> ifneq ($(MACHINE),)
> -include $(srctree)/$(MACHINE)/Makefile.boot
> +-include $(srctree)/$(MACHINE)/Makefile.boot
> endif
>
> # Note: the following conditions must always be true:
> -# ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
> # PARAMS_PHYS must be within 4MB of ZRELADDR
> # INITRD_PHYS must be in RAM
> -ZRELADDR := $(zreladdr-y)
> PARAMS_PHYS := $(params_phys-y)
> INITRD_PHYS := $(initrd_phys-y)
>
> -export ZRELADDR INITRD_PHYS PARAMS_PHYS
> +export INITRD_PHYS PARAMS_PHYS
>
> targets := Image zImage xipImage bootpImage uImage
>
> @@ -67,7 +65,7 @@ quiet_cmd_uimage = UIMAGE $@
> ifeq ($(CONFIG_ZBOOT_ROM),y)
> $(obj)/uImage: LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT)
> else
> -$(obj)/uImage: LOADADDR=$(ZRELADDR)
> +$(obj)/uImage: LOADADDR=$(CONFIG_ZRELADDR)
> endif
>
> ifeq ($(CONFIG_THUMB2_KERNEL),y)
> @@ -78,6 +76,8 @@ $(obj)/uImage: STARTADDR=$(LOADADDR)
> endif
>
> $(obj)/uImage: $(obj)/zImage FORCE
> + @test "$(CONFIG_AUTO_ZRELADDR)" == "y" ||\
> + (echo CONFIG_ZRELADDR must be specified for uImage; exit -1)
> $(call if_changed,uimage)
> @echo ' Image $@ is ready'
>
> diff --git a/arch/arm/boot/compressed/Makefile
> b/arch/arm/boot/compressed/Makefile index dbd3fe8..45b0f48 100644
> --- a/arch/arm/boot/compressed/Makefile
> +++ b/arch/arm/boot/compressed/Makefile
> @@ -4,6 +4,8 @@
> # create a compressed vmlinuz image from the original vmlinux
> #
>
> +AFLAGS_head.o := -DTEXT_OFFSET=$(CONFIG_TEXT_OFFSET)
> +
> HEAD = head.o
> OBJS = misc.o decompress.o
> FONTC = $(srctree)/drivers/video/console/font_acorn_8x8.c
> @@ -79,8 +81,6 @@ endif
> EXTRA_CFLAGS := -fpic -fno-builtin
> EXTRA_AFLAGS := -Wa,-march=all
>
> -# Supply ZRELADDR to the decompressor via linker symbols.
> -LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR)
> ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
> LDFLAGS_vmlinux += --be8
> endif
> diff --git a/arch/arm/boot/compressed/head.S
> b/arch/arm/boot/compressed/head.S index 0765990..17d19dc 100644
> --- a/arch/arm/boot/compressed/head.S
> +++ b/arch/arm/boot/compressed/head.S
> @@ -170,9 +170,16 @@ not_angel:
>
> .text
> adr r0, LC0
> - ARM( ldmia r0, {r1, r2, r3, r4, r5, r6, r11, ip, sp})
> - THUMB( ldmia r0, {r1, r2, r3, r4, r5, r6, r11, ip} )
> + ARM( ldmia r0, {r1, r2, r3, r5, r6, r11, ip, sp})
> + THUMB( ldmia r0, {r1, r2, r3, r5, r6, r11, ip} )
> THUMB( ldr sp, [r0, #32] )
> +#ifdef CONFIG_AUTO_ZRELADDR
> + @ determine final kernel image address
> + and r4, pc, #0xf0000000
> + add r4, r4, #TEXT_OFFSET
> +#else
> + ldr r4, =CONFIG_ZRELADDR
> +#endif
> subs r0, r0, r1 @ calculate the delta offset
>
> @ if delta is zero, we are
> @@ -310,7 +317,6 @@ wont_overwrite: mov r0, r4
> LC0: .word LC0 @ r1
> .word __bss_start @ r2
> .word _end @ r3
> - .word zreladdr @ r4
> .word _start @ r5
> .word _image_size @ r6
> .word _got_start @ r11
next prev parent reply other threads:[~2010-06-07 15:12 UTC|newest]
Thread overview: 133+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-03 7:36 [PATCH 0/5] Makefile.boot cleanup Eric Miao
2010-06-03 7:36 ` [PATCH 1/5] [ARM] Remove unused PARAMS_PHYS from arch/arm/boot/compressed Eric Miao
2010-06-10 8:48 ` Uwe Kleine-König
2010-06-03 7:36 ` [PATCH 2/5] [ARM] Remove unused INITRD_PHYS " Eric Miao
2010-06-10 8:27 ` Uwe Kleine-König
2010-06-10 9:55 ` Eric Miao
2010-06-03 7:36 ` [PATCH 3/5] [ARM] Make TEXT_OFFSET a configurable option Eric Miao
2010-06-10 8:50 ` Uwe Kleine-König
2010-06-10 9:45 ` Eric Miao
2010-06-10 10:00 ` Uwe Kleine-König
2010-06-03 7:36 ` [PATCH 4/5] [ARM] Auto calculate ZRELADDR and provide option for exceptions Eric Miao
2010-06-07 8:51 ` Tony Lindgren
2010-06-07 15:12 ` Marek Vasut [this message]
2010-06-08 6:12 ` Eric Miao
2010-06-10 9:00 ` Uwe Kleine-König
2010-06-10 9:16 ` Russell King - ARM Linux
2010-06-10 9:35 ` Uwe Kleine-König
2010-06-10 9:38 ` Eric Miao
2010-06-10 9:43 ` Uwe Kleine-König
2010-06-10 9:47 ` Eric Miao
2010-06-10 9:18 ` Eric Miao
2010-06-10 9:58 ` Uwe Kleine-König
2010-06-10 10:20 ` Eric Miao
2010-06-10 22:06 ` Linus Walleij
2010-06-10 22:23 ` Linus Walleij
2010-06-11 1:34 ` Eric Miao
2010-06-10 18:40 ` Nicolas Pitre
2010-06-10 22:17 ` Linus Walleij
2010-06-11 6:37 ` Uwe Kleine-König
2010-06-17 19:33 ` Russell King - ARM Linux
2010-06-11 4:27 ` srinidhi
2010-09-02 21:21 ` Russell King - ARM Linux
2010-09-02 21:27 ` Russell King - ARM Linux
2010-09-03 7:48 ` Uwe Kleine-König
2010-09-03 9:55 ` Uwe Kleine-König
2010-09-03 9:56 ` [PATCH 1/7] ARM: specify ZRELADDR for ARCH_TEGRA Uwe Kleine-König
2010-09-03 17:46 ` Erik Gilling
2010-09-03 19:01 ` Uwe Kleine-König
2010-09-03 19:19 ` Erik Gilling
2010-09-03 19:23 ` Uwe Kleine-König
2010-09-08 9:11 ` Russell King - ARM Linux
2010-09-08 11:56 ` Russell King - ARM Linux
2010-09-08 12:16 ` Uwe Kleine-König
2010-09-08 22:07 ` Russell King - ARM Linux
2010-09-09 7:24 ` Uwe Kleine-König
2010-09-09 16:56 ` Erik Gilling
2010-09-03 9:56 ` [PATCH 2/7] [RFC] ARM: shmobile: remove unneeded hack to calculate zreladdr Uwe Kleine-König
2010-09-03 13:39 ` Eric Miao
2010-09-03 18:53 ` Uwe Kleine-König
2010-09-14 8:08 ` Paul Mundt
2010-09-14 12:23 ` Uwe Kleine-König
2010-09-03 9:56 ` [PATCH 3/7] ARM: specify ZRELADDR for ARCH_H720X Uwe Kleine-König
2010-09-03 13:40 ` Eric Miao
2010-09-03 9:56 ` [PATCH 4/7] ARM: specify ZRELADDR for ARCH_LPC32XX Uwe Kleine-König
2010-09-03 13:41 ` Eric Miao
2010-09-03 9:56 ` [PATCH 5/7] ARM: don't expose CONFIG_ZRELADDR to the users Uwe Kleine-König
2010-09-03 13:30 ` Eric Miao
2010-09-03 18:53 ` Uwe Kleine-König
2010-09-04 8:52 ` Eric Miao
2010-09-07 22:39 ` Mathieu Rondonneau
2010-09-08 5:04 ` Uwe Kleine-König
2010-09-03 9:56 ` [PATCH 6/7] ARM: fix ordering of defaults for config ZRELADDR Uwe Kleine-König
2010-09-03 9:56 ` [PATCH 7/7] ARM: removed unused zreladdr specifications in all Makefile.boot files Uwe Kleine-König
2010-09-03 15:01 ` Eric Miao
2010-09-03 18:48 ` [PATCH 7/7 v2] " Uwe Kleine-König
2010-09-03 20:46 ` [PATCH 4/5] [ARM] Auto calculate ZRELADDR and provide option for exceptions Uwe Kleine-König
2010-09-05 18:52 ` Uwe Kleine-König
2010-09-08 9:14 ` Russell King - ARM Linux
2010-09-08 9:11 ` Russell King - ARM Linux
2010-09-08 20:31 ` Robert Schwebel
2010-09-03 13:33 ` Eric Miao
2010-06-03 7:36 ` [PATCH 5/5] [ARM] Move inclusion of Makefile.boot into arch/arm/boot/bootp Eric Miao
2010-06-10 9:01 ` Uwe Kleine-König
2010-06-03 7:43 ` [PATCH 0/5] Makefile.boot cleanup Eric Miao
2010-06-03 8:00 ` Uwe Kleine-König
2010-06-03 8:27 ` Eric Miao
2010-06-03 7:57 ` Uwe Kleine-König
2010-06-10 18:44 ` Nicolas Pitre
2010-06-11 4:55 ` Uwe Kleine-König
2010-06-17 19:22 ` Nicolas Pitre
2010-06-18 1:31 ` Eric Miao
2010-06-18 2:30 ` Eric Miao
2010-06-10 10:24 ` [PATCH 0/10] cleanup in early boot code Uwe Kleine-König
2010-06-10 10:27 ` [PATCH 01/10] arm/zImage: don't hard code the stack size twice Uwe Kleine-König
2010-06-10 10:31 ` Eric Miao
2010-06-10 18:47 ` Nicolas Pitre
2010-06-10 10:27 ` [PATCH 02/10] arm/zImage: some comments for __armv3_mpu_cache_on Uwe Kleine-König
2010-06-10 21:36 ` Sergei Shtylyov
2010-06-16 3:16 ` Eric Miao
2010-06-16 9:19 ` Russell King - ARM Linux
2010-06-10 10:27 ` [PATCH 03/10] arm/zImage: __armv3_mpu_cache_flush: respect should-be-zero specification Uwe Kleine-König
2010-06-11 1:23 ` Eric Miao
2010-06-10 10:27 ` [PATCH 04/10] arm/zImage: fix comments for cache_on, cache_off and cache_clean_flush Uwe Kleine-König
2010-06-17 9:28 ` Eric Miao
2010-06-10 10:27 ` [PATCH 05/10] arm/zImage: annotate debug functions about corrupted registers Uwe Kleine-König
2010-06-17 9:37 ` Eric Miao
2010-06-17 9:49 ` Uwe Kleine-König
2010-06-10 10:27 ` [PATCH 06/10] arm: remove bit-rotten STANDALONE_DEBUG for decompressor Uwe Kleine-König
2010-06-17 9:50 ` Eric Miao
2010-06-10 10:27 ` [PATCH 07/10] arm/zImage: don't define unused symbol initrd_phys Uwe Kleine-König
2010-06-17 9:19 ` Eric Miao
2010-06-10 10:27 ` [PATCH 08/10] arm: deprecate support for old way to pass kernel parameters Uwe Kleine-König
2010-06-17 9:58 ` Eric Miao
2010-06-17 23:00 ` Russell King - ARM Linux
2010-06-10 10:27 ` [PATCH 09/10] arm/uImage: require passing a LOADADDR when building with RUNTIME_PHYSOFFSET Uwe Kleine-König
2010-06-10 10:27 ` [PATCH 10/10] arm: Allow PHYS_OFFSET to be runtime determined Uwe Kleine-König
2010-06-10 10:28 ` [PATCH 0/10] cleanup in early boot code Eric Miao
2010-07-05 14:13 ` [PATCH 0/5] Makefile.boot cleanup Uwe Kleine-König
2010-07-05 14:15 ` [PATCH 01/11] ARM: zImage: don't hard code the stack size twice Uwe Kleine-König
2010-07-05 14:15 ` [PATCH 02/11] ARM: zImage: some comments for __armv3_mpu_cache_on Uwe Kleine-König
2010-07-05 14:15 ` [PATCH 03/11] ARM: zImage: __armv3_mpu_cache_flush: respect should-be-zero specification Uwe Kleine-König
2010-07-05 14:15 ` [PATCH 04/11] ARM: zImage: fix comments for cache_on, cache_off and cache_clean_flush Uwe Kleine-König
2010-07-05 14:15 ` [PATCH 05/11] ARM: zImage: annotate debug functions about corrupted registers Uwe Kleine-König
2010-07-05 14:15 ` [PATCH 06/11] ARM: remove bit-rotten STANDALONE_DEBUG for decompressor Uwe Kleine-König
2010-07-05 15:36 ` Nicolas Pitre
2010-07-05 14:15 ` [PATCH 07/11] ARM: zImage: don't define unused symbol initrd_phys Uwe Kleine-König
2010-07-05 14:15 ` [PATCH 08/11] ARM: deprecate support for old way to pass kernel parameters Uwe Kleine-König
2010-07-05 14:15 ` [PATCH 09/11] ARM: uImage: require passing a LOADADDR when building with RUNTIME_PHYSOFFSET Uwe Kleine-König
2010-07-05 16:03 ` Nicolas Pitre
2010-07-05 14:15 ` [PATCH 10/11] ARM: Remove unused PARAMS_PHYS from arch/arm/boot/compressed Uwe Kleine-König
2010-07-05 14:15 ` [PATCH 11/11] Auto calculate ZRELADDR and provide option for exceptions Uwe Kleine-König
2010-07-05 15:31 ` Nicolas Pitre
2010-07-06 2:09 ` Eric Miao
2010-07-31 15:54 ` Russell King - ARM Linux
2010-07-31 17:44 ` Nicolas Pitre
2010-08-02 8:42 ` [PATCH] ARM: don't expose CONFIG_ZRELADDR to the users Uwe Kleine-König
2010-07-07 14:45 ` [PATCH 0/5] Makefile.boot cleanup Uwe Kleine-König
2010-07-07 15:54 ` Nicolas Pitre
2010-07-08 7:08 ` Uwe Kleine-König
2010-07-08 20:49 ` Nicolas Pitre
2010-07-10 9:16 ` Eric Miao
2010-07-21 8:20 ` Uwe Kleine-König
2010-07-29 16:17 ` Git pull request, was " Nicolas Pitre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201006071712.20888.marek.vasut@gmail.com \
--to=marek.vasut@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).