From: kmpark@infradead.org (Kyungmin Park)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] Remove unused serial flags
Date: Sat, 19 Jun 2010 13:22:05 +0900 [thread overview]
Message-ID: <20100619042205.GA24864@july> (raw)
From: Kyungmin Park <kyungmin.park@samsung.com>
Remove unused serial flags. Only s5p series.
After remove s3c series then remove s3c240_uartcfg flags field.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index af22f82..1698d03 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -60,28 +60,24 @@
static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
- .flags = 0,
.ucon = S5PC100_UCON_DEFAULT,
.ulcon = S5PC100_ULCON_DEFAULT,
.ufcon = S5PC100_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
- .flags = 0,
.ucon = S5PC100_UCON_DEFAULT,
.ulcon = S5PC100_ULCON_DEFAULT,
.ufcon = S5PC100_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
- .flags = 0,
.ucon = S5PC100_UCON_DEFAULT,
.ulcon = S5PC100_ULCON_DEFAULT,
.ufcon = S5PC100_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
- .flags = 0,
.ucon = S5PC100_UCON_DEFAULT,
.ulcon = S5PC100_ULCON_DEFAULT,
.ufcon = S5PC100_UFCON_DEFAULT,
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 10bc76e..37a62dd 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -46,28 +46,24 @@
static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
- .flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
- .flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
- .flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
- .flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 4863b13..b0e54ea 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -43,28 +43,24 @@
static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
- .flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
- .flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
- .flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
- .flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index 4c8903c..1410a5f 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -43,28 +43,24 @@
static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
- .flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
- .flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
- .flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
- .flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 0d46279..e0d72fc 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -45,28 +45,24 @@
static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
- .flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
- .flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
- .flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
- .flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
reply other threads:[~2010-06-19 4:22 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100619042205.GA24864@july \
--to=kmpark@infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox