From: baruch@tkos.co.il (Baruch Siach)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] GPIO PL061: Adding Clk framework support
Date: Mon, 21 Jun 2010 09:01:51 +0300 [thread overview]
Message-ID: <20100621060151.GC18217@jasper.tkos.co.il> (raw)
In-Reply-To: <1277098753-5780-1-git-send-email-viresh.kumar@st.com>
Hi Viresh,
On Mon, Jun 21, 2010 at 11:09:13AM +0530, Viresh KUMAR wrote:
> From: Viresh KUMAR <viresh.kumar@st.com>
>
> Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Please add a commit log explaining the need for this change.
baruch
> ---
> drivers/gpio/pl061.c | 44 +++++++++++++++++++++++++++++++++++++++++---
> 1 files changed, 41 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpio/pl061.c b/drivers/gpio/pl061.c
> index 105701a..5848237 100644
> --- a/drivers/gpio/pl061.c
> +++ b/drivers/gpio/pl061.c
> @@ -11,7 +11,10 @@
> *
> * Data sheet: ARM DDI 0190B, September 2000
> */
> +
> +#include <linux/clk.h>
> #include <linux/spinlock.h>
> +#include <linux/err.h>
> #include <linux/errno.h>
> #include <linux/module.h>
> #include <linux/list.h>
> @@ -56,8 +59,33 @@ struct pl061_gpio {
> void __iomem *base;
> unsigned irq_base;
> struct gpio_chip gc;
> + unsigned usage_count;
> + struct clk *clk;
> };
>
> +static int pl061_request(struct gpio_chip *gc, unsigned offset)
> +{
> + struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc);
> +
> + if (offset >= gc->ngpio)
> + return -EINVAL;
> +
> + if (!chip->usage_count)
> + clk_enable(chip->clk);
> +
> + chip->usage_count++;
> + return 0;
> +}
> +
> +static void pl061_free(struct gpio_chip *gc, unsigned offset)
> +{
> + struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc);
> +
> + chip->usage_count--;
> + if (!chip->usage_count)
> + clk_disable(chip->clk);
> +}
> +
> static int pl061_direction_input(struct gpio_chip *gc, unsigned offset)
> {
> struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc);
> @@ -260,10 +288,18 @@ static int __init pl061_probe(struct amba_device *dev, struct amba_id *id)
> goto release_region;
> }
>
> + chip->clk = clk_get(&dev->dev, NULL);
> + if (IS_ERR(chip->clk)) {
> + ret = PTR_ERR(chip->clk);
> + goto iounmap;
> + }
> +
> spin_lock_init(&chip->lock);
> spin_lock_init(&chip->irq_lock);
> INIT_LIST_HEAD(&chip->list);
>
> + chip->gc.request = pl061_request;
> + chip->gc.free = pl061_free;
> chip->gc.direction_input = pl061_direction_input;
> chip->gc.direction_output = pl061_direction_output;
> chip->gc.get = pl061_get_value;
> @@ -279,7 +315,7 @@ static int __init pl061_probe(struct amba_device *dev, struct amba_id *id)
>
> ret = gpiochip_add(&chip->gc);
> if (ret)
> - goto iounmap;
> + goto free_clk;
>
> /*
> * irq_chip support
> @@ -292,7 +328,7 @@ static int __init pl061_probe(struct amba_device *dev, struct amba_id *id)
> irq = dev->irq[0];
> if (irq < 0) {
> ret = -ENODEV;
> - goto iounmap;
> + goto free_clk;
> }
> set_irq_chained_handler(irq, pl061_irq_handler);
> if (!test_and_set_bit(irq, init_irq)) { /* list initialized? */
> @@ -300,7 +336,7 @@ static int __init pl061_probe(struct amba_device *dev, struct amba_id *id)
> if (chip_list == NULL) {
> clear_bit(irq, init_irq);
> ret = -ENOMEM;
> - goto iounmap;
> + goto free_clk;
> }
> INIT_LIST_HEAD(chip_list);
> set_irq_data(irq, chip_list);
> @@ -323,6 +359,8 @@ static int __init pl061_probe(struct amba_device *dev, struct amba_id *id)
>
> return 0;
>
> +free_clk:
> + clk_put(chip->clk);
> iounmap:
> iounmap(chip->base);
> release_region:
> --
> 1.6.0.2
>
--
~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -
next prev parent reply other threads:[~2010-06-21 6:01 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-21 5:39 [PATCH] GPIO PL061: Adding Clk framework support Viresh KUMAR
2010-06-21 6:01 ` Baruch Siach [this message]
2010-06-21 6:20 ` Viresh KUMAR
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100621060151.GC18217@jasper.tkos.co.il \
--to=baruch@tkos.co.il \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox