[PATCH 00/16] imx patches for 2.6.36

[PATCH 00/16] imx patches for 2.6.36

[Uwe Kleine-König]

Hello,

in reply to this mail you can find some more clean-ups and updates for
the imx platforms.  Shortlog and diffstat can be found below.

They are compile tested (all imx defconfigs) and merge fine with
Sascha's for-linus and for-rmk branches.

Best regards
Uwe

The following changes since commit 7e125f7b9cbfce4101191b8076d606c517a73066:
  Linus Torvalds (1):
        Merge git://git.kernel.org/.../davem/ide-2.6

are available in the git repository at:

  git://git.pengutronix.de/git/ukl/linux-2.6.git imx/for-2.6.36

Uwe Kleine-K?nig (16):
      arm/mx3: rename mach-mx35pdk.c to mach-mx35_3ds.c matching its arch number
      arm/mx25: rename mach-mx25pdk.c to mach-mx25_3ds.c matching its arch number
      arm/mx1: add CONFIG_VIDEO_MX1 to defconfig
      arm/mx1: don't use deprecated symbol names
      arm/mx2/pca100: add #ifdef to fix compiler warning
      arm/mx1/scb9328: fix type of uart1_mxc_exit to make compiler happy
      arm/mx2/mx27_3ds: document alternative names and remove empty header
      arm/imx: remove empty and unused board headers
      arm/mx2/mbimx27: compile fixes with CONFIG_TOUCHSCREEN_ADS7846=y
      arm/mx3/kzm_arm11_01: fold board header in its only user
      arm/mx2/mx21ads: fold board header in its only user
      arm/mx2/mx27ads: fold board header in its only user
      arm/mx3/qong: get rid of nearly empty header
      arm/mx3/mx31_3ds: fold board header in its only user
      arm/mx3/mx31ads: fold board header in its only user
      arm/mxc: grammar fix

 arch/arm/configs/mx1_defconfig                     |    6 +-
 arch/arm/configs/mx27_defconfig                    |    2 +-
 arch/arm/mach-mx1/Makefile                         |    1 -
 arch/arm/mach-mx1/clock.c                          |    3 +-
 arch/arm/mach-mx1/crm_regs.h                       |    4 +-
 arch/arm/mach-mx1/devices.c                        |  117 ++++----
 arch/arm/mach-mx1/generic.c                        |   13 +-
 arch/arm/mach-mx1/mach-mx1ads.c                    |   12 +-
 arch/arm/mach-mx1/mach-scb9328.c                   |   15 +-
 arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c       |    5 +-
 arch/arm/mach-mx2/mach-imx27lite.c                 |    1 -
 arch/arm/mach-mx2/mach-mx21ads.c                   |   36 ++-
 arch/arm/mach-mx2/mach-mx27_3ds.c                  |    7 +-
 arch/arm/mach-mx2/mach-mx27ads.c                   |   32 ++-
 arch/arm/mach-mx2/mach-pca100.c                    |    2 +
 arch/arm/mach-mx25/Makefile                        |    2 +-
 .../mach-mx25/{mach-mx25pdk.c => mach-mx25_3ds.c}  |    6 +
 arch/arm/mach-mx3/Makefile                         |    2 +-
 arch/arm/mach-mx3/mach-armadillo5x0.c              |    1 -
 arch/arm/mach-mx3/mach-kzm_arm11_01.c              |   18 +-
 arch/arm/mach-mx3/mach-mx31_3ds.c                  |   41 ++-
 arch/arm/mach-mx3/mach-mx31ads.c                   |   42 ++-
 .../mach-mx3/{mach-mx35pdk.c => mach-mx35_3ds.c}   |    6 +
 arch/arm/mach-mx3/mach-pcm037.c                    |    1 -
 arch/arm/mach-mx3/mach-qong.c                      |    3 +-
 .../arm/plat-mxc/include/mach/board-armadillo5x0.h |   15 -
 .../plat-mxc/include/mach/board-eukrea_cpuimx27.h  |    2 +-
 arch/arm/plat-mxc/include/mach/board-kzmarm11.h    |   39 ---
 arch/arm/plat-mxc/include/mach/board-mx21ads.h     |   52 ---
 arch/arm/plat-mxc/include/mach/board-mx27ads.h     |  344 --------------------
 arch/arm/plat-mxc/include/mach/board-mx27lite.h    |   14 -
 arch/arm/plat-mxc/include/mach/board-mx27pdk.h     |   14 -
 arch/arm/plat-mxc/include/mach/board-mx31ads.h     |  117 -------
 arch/arm/plat-mxc/include/mach/board-mx31lilly.h   |    2 +-
 arch/arm/plat-mxc/include/mach/board-mx31lite.h    |    2 +-
 arch/arm/plat-mxc/include/mach/board-mx31moboard.h |    2 +-
 arch/arm/plat-mxc/include/mach/board-mx35pdk.h     |   22 --
 arch/arm/plat-mxc/include/mach/board-pcm037.h      |   22 --
 arch/arm/plat-mxc/include/mach/board-pcm038.h      |    2 +-
 arch/arm/plat-mxc/include/mach/board-pcm043.h      |   22 --
 arch/arm/plat-mxc/include/mach/board-qong.h        |   17 -
 41 files changed, 272 insertions(+), 794 deletions(-)
 rename arch/arm/mach-mx25/{mach-mx25pdk.c => mach-mx25_3ds.c} (97%)
 rename arch/arm/mach-mx3/{mach-mx35pdk.c => mach-mx35_3ds.c} (96%)
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-kzmarm11.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx21ads.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx27ads.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx27lite.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx27pdk.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx31ads.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx35pdk.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-pcm037.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-pcm043.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-qong.h


-- 
Pengutronix e.K.                           | Uwe Kleine-K?nig            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[PATCH 01/16] arm/mx3: rename mach-mx35pdk.c to mach-mx35_3ds.c matching its arch number

[Uwe Kleine-König]

Additional document all known names of that machine.

Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
 arch/arm/mach-mx3/Makefile                         |    2 +-
 .../mach-mx3/{mach-mx35pdk.c => mach-mx35_3ds.c}   |    6 ++++++
 2 files changed, 7 insertions(+), 1 deletions(-)
 rename arch/arm/mach-mx3/{mach-mx35pdk.c => mach-mx35_3ds.c} (96%)

diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 5d650fd..2a4798d 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -22,5 +22,5 @@ obj-$(CONFIG_MACH_MX31MOBOARD)	+= mach-mx31moboard.o mx31moboard-devboard.o \
 obj-$(CONFIG_MACH_QONG)		+= mach-qong.o
 obj-$(CONFIG_MACH_PCM043)	+= mach-pcm043.o
 obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
-obj-$(CONFIG_MACH_MX35_3DS)	+= mach-mx35pdk.o
+obj-$(CONFIG_MACH_MX35_3DS)	+= mach-mx35_3ds.o
 obj-$(CONFIG_MACH_KZM_ARM11_01)	+= mach-kzm_arm11_01.o
diff --git a/arch/arm/mach-mx3/mach-mx35pdk.c b/arch/arm/mach-mx3/mach-mx35_3ds.c
similarity index 96%
rename from arch/arm/mach-mx3/mach-mx35pdk.c
rename to arch/arm/mach-mx3/mach-mx35_3ds.c
index bcac84d..66ad2da 100644
--- a/arch/arm/mach-mx3/mach-mx35pdk.c
+++ b/arch/arm/mach-mx3/mach-mx35_3ds.c
@@ -18,6 +18,12 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+/*
+ * This machine is known as:
+ *  - i.MX35 3-Stack Development System
+ *  - i.MX35 Platform Development Kit (i.MX35 PDK)
+ */
+
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-- 
1.7.0

[PATCH 02/16] arm/mx25: rename mach-mx25pdk.c to mach-mx25_3ds.c matching its arch number

[Uwe Kleine-König]

Additionally document all known names of that machine.

Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
 arch/arm/mach-mx25/Makefile                        |    2 +-
 .../mach-mx25/{mach-mx25pdk.c => mach-mx25_3ds.c}  |    6 ++++++
 2 files changed, 7 insertions(+), 1 deletions(-)
 rename arch/arm/mach-mx25/{mach-mx25pdk.c => mach-mx25_3ds.c} (97%)

diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile
index 10cebc5..6db9603 100644
--- a/arch/arm/mach-mx25/Makefile
+++ b/arch/arm/mach-mx25/Makefile
@@ -1,3 +1,3 @@
 obj-y				:= mm.o devices.o
 obj-$(CONFIG_ARCH_MX25)		+= clock.o
-obj-$(CONFIG_MACH_MX25_3DS)	+= mach-mx25pdk.o
+obj-$(CONFIG_MACH_MX25_3DS)	+= mach-mx25_3ds.o
diff --git a/arch/arm/mach-mx25/mach-mx25pdk.c b/arch/arm/mach-mx25/mach-mx25_3ds.c
similarity index 97%
rename from arch/arm/mach-mx25/mach-mx25pdk.c
rename to arch/arm/mach-mx25/mach-mx25_3ds.c
index 83d7410..26ba246 100644
--- a/arch/arm/mach-mx25/mach-mx25pdk.c
+++ b/arch/arm/mach-mx25/mach-mx25_3ds.c
@@ -16,6 +16,12 @@
  * Boston, MA  02110-1301, USA.
  */
 
+/*
+ * This machine is known as:
+ *  - i.MX25 3-Stack Development System
+ *  - i.MX25 Platform Development Kit (i.MX25 PDK)
+ */
+
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-- 
1.7.0

[PATCH 03/16] arm/mx1: add CONFIG_VIDEO_MX1 to defconfig

[Uwe Kleine-König]

mx1 is the only machine type that can have this device, so add it to
its defconfig to get more compile coverage.

Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
 arch/arm/configs/mx1_defconfig |    6 +++++-
 1 files changed, 5 insertions(+), 1 deletions(-)

diff --git a/arch/arm/configs/mx1_defconfig b/arch/arm/configs/mx1_defconfig
index f575070..208060e 100644
--- a/arch/arm/configs/mx1_defconfig
+++ b/arch/arm/configs/mx1_defconfig
@@ -697,6 +697,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+CONFIG_MEDIA_SUPPORT=m
 
 #
 # Multimedia devices
@@ -705,13 +706,16 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multimedia core support
 #
-# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_DEV=m
 # CONFIG_DVB_CORE is not set
 # CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
 #
+CONFIG_VIDEO_V4L2=m
+CONFIG_SOC_CAMERA=m
+CONFIG_VIDEO_MX1=m
 # CONFIG_DAB is not set
 
 #
-- 
1.7.0

[PATCH 04/16] arm/mx1: don't use deprecated symbol names

[Uwe Kleine-König]

Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
 arch/arm/mach-mx1/Makefile       |    1 -
 arch/arm/mach-mx1/clock.c        |    3 +-
 arch/arm/mach-mx1/crm_regs.h     |    4 +-
 arch/arm/mach-mx1/devices.c      |  117 +++++++++++++++++++-------------------
 arch/arm/mach-mx1/generic.c      |   13 ++--
 arch/arm/mach-mx1/mach-mx1ads.c  |   12 ++--
 arch/arm/mach-mx1/mach-scb9328.c |   12 ++--
 7 files changed, 81 insertions(+), 81 deletions(-)

diff --git a/arch/arm/mach-mx1/Makefile b/arch/arm/mach-mx1/Makefile
index fc2ddf8..297d172 100644
--- a/arch/arm/mach-mx1/Makefile
+++ b/arch/arm/mach-mx1/Makefile
@@ -4,7 +4,6 @@
 
 # Object file lists.
 
-EXTRA_CFLAGS += -DIMX_NEEDS_DEPRECATED_SYMBOLS
 obj-y			+= generic.o clock.o devices.o
 
 # Support for CMOS sensor interface
diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c
index 6cf2d4a..610b88d 100644
--- a/arch/arm/mach-mx1/clock.c
+++ b/arch/arm/mach-mx1/clock.c
@@ -596,7 +596,8 @@ int __init mx1_clocks_init(unsigned long fref)
 	clk_enable(&hclk);
 	clk_enable(&fclk);
 
-	mxc_timer_init(&gpt_clk, IO_ADDRESS(TIM1_BASE_ADDR), TIM1_INT);
+	mxc_timer_init(&gpt_clk, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR),
+			MX1_TIM1_INT);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx1/crm_regs.h b/arch/arm/mach-mx1/crm_regs.h
index 22e866f..13e81e6 100644
--- a/arch/arm/mach-mx1/crm_regs.h
+++ b/arch/arm/mach-mx1/crm_regs.h
@@ -9,8 +9,8 @@
 #ifndef __ARCH_ARM_MACH_MX1_CRM_REGS_H__
 #define __ARCH_ARM_MACH_MX1_CRM_REGS_H__
 
-#define CCM_BASE	IO_ADDRESS(CCM_BASE_ADDR)
-#define SCM_BASE	IO_ADDRESS(SCM_BASE_ADDR)
+#define CCM_BASE	MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR)
+#define SCM_BASE	MX1_IO_ADDRESS(MX1_SCM_BASE_ADDR)
 
 /* CCM register addresses */
 #define CCM_CSCR	(CCM_BASE + 0x0)
diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c
index b6be29d..8064f2c 100644
--- a/arch/arm/mach-mx1/devices.c
+++ b/arch/arm/mach-mx1/devices.c
@@ -21,6 +21,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <mach/irqs.h>
@@ -34,20 +35,20 @@ static struct resource imx_csi_resources[] = {
 		.end    = 0x00224010,
 		.flags  = IORESOURCE_MEM,
 	}, {
-		.start  = CSI_INT,
-		.end    = CSI_INT,
+		.start  = MX1_CSI_INT,
+		.end    = MX1_CSI_INT,
 		.flags  = IORESOURCE_IRQ,
 	},
 };
 
-static u64 imx_csi_dmamask = 0xffffffffUL;
+static u64 imx_csi_dmamask = DMA_BIT_MASK(32);
 
 struct platform_device imx_csi_device = {
 	.name           = "mx1-camera",
 	.id             = 0, /* This is used to put cameras on this interface */
 	.dev		= {
 		.dma_mask = &imx_csi_dmamask,
-		.coherent_dma_mask = 0xffffffff,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 	.resource       = imx_csi_resources,
 	.num_resources  = ARRAY_SIZE(imx_csi_resources),
@@ -59,8 +60,8 @@ static struct resource imx_i2c_resources[] = {
 		.end    = 0x00217010,
 		.flags  = IORESOURCE_MEM,
 	}, {
-		.start  = I2C_INT,
-		.end    = I2C_INT,
+		.start  = MX1_I2C_INT,
+		.end    = MX1_I2C_INT,
 		.flags  = IORESOURCE_IRQ,
 	},
 };
@@ -74,21 +75,21 @@ struct platform_device imx_i2c_device = {
 
 static struct resource imx_uart1_resources[] = {
 	{
-		.start	= UART1_BASE_ADDR,
-		.end	= UART1_BASE_ADDR + 0xD0,
-		.flags	= IORESOURCE_MEM,
+		.start = MX1_UART1_BASE_ADDR,
+		.end = MX1_UART1_BASE_ADDR + 0xD0,
+		.flags = IORESOURCE_MEM,
 	}, {
-		.start	= UART1_MINT_RX,
-		.end	= UART1_MINT_RX,
-		.flags	= IORESOURCE_IRQ,
+		.start = MX1_UART1_MINT_RX,
+		.end = MX1_UART1_MINT_RX,
+		.flags = IORESOURCE_IRQ,
 	}, {
-		.start	= UART1_MINT_TX,
-		.end	= UART1_MINT_TX,
-		.flags	= IORESOURCE_IRQ,
+		.start = MX1_UART1_MINT_TX,
+		.end = MX1_UART1_MINT_TX,
+		.flags = IORESOURCE_IRQ,
 	}, {
-		.start	= UART1_MINT_RTS,
-		.end	= UART1_MINT_RTS,
-		.flags	= IORESOURCE_IRQ,
+		.start = MX1_UART1_MINT_RTS,
+		.end = MX1_UART1_MINT_RTS,
+		.flags = IORESOURCE_IRQ,
 	},
 };
 
@@ -101,21 +102,21 @@ struct platform_device imx_uart1_device = {
 
 static struct resource imx_uart2_resources[] = {
 	{
-		.start	= UART2_BASE_ADDR,
-		.end	= UART2_BASE_ADDR + 0xD0,
-		.flags	= IORESOURCE_MEM,
+		.start = MX1_UART2_BASE_ADDR,
+		.end = MX1_UART2_BASE_ADDR + 0xD0,
+		.flags = IORESOURCE_MEM,
 	}, {
-		.start	= UART2_MINT_RX,
-		.end	= UART2_MINT_RX,
-		.flags	= IORESOURCE_IRQ,
+		.start = MX1_UART2_MINT_RX,
+		.end = MX1_UART2_MINT_RX,
+		.flags = IORESOURCE_IRQ,
 	}, {
-		.start	= UART2_MINT_TX,
-		.end	= UART2_MINT_TX,
-		.flags	= IORESOURCE_IRQ,
+		.start = MX1_UART2_MINT_TX,
+		.end = MX1_UART2_MINT_TX,
+		.flags = IORESOURCE_IRQ,
 	}, {
-		.start	= UART2_MINT_RTS,
-		.end	= UART2_MINT_RTS,
-		.flags	= IORESOURCE_IRQ,
+		.start = MX1_UART2_MINT_RTS,
+		.end = MX1_UART2_MINT_RTS,
+		.flags = IORESOURCE_IRQ,
 	},
 };
 
@@ -132,12 +133,12 @@ static struct resource imx_rtc_resources[] = {
 		.end    = 0x00204024,
 		.flags  = IORESOURCE_MEM,
 	}, {
-		.start  = RTC_INT,
-		.end    = RTC_INT,
+		.start  = MX1_RTC_INT,
+		.end    = MX1_RTC_INT,
 		.flags  = IORESOURCE_IRQ,
 	}, {
-		.start  = RTC_SAMINT,
-		.end    = RTC_SAMINT,
+		.start  = MX1_RTC_SAMINT,
+		.end    = MX1_RTC_SAMINT,
 		.flags  = IORESOURCE_IRQ,
 	},
 };
@@ -155,8 +156,8 @@ static struct resource imx_wdt_resources[] = {
 		.end    = 0x00201008,
 		.flags  = IORESOURCE_MEM,
 	}, {
-		.start  = WDT_INT,
-		.end    = WDT_INT,
+		.start  = MX1_WDT_INT,
+		.end    = MX1_WDT_INT,
 		.flags  = IORESOURCE_IRQ,
 	},
 };
@@ -174,32 +175,32 @@ static struct resource imx_usb_resources[] = {
 		.end	= 0x00212148,
 		.flags	= IORESOURCE_MEM,
 	}, {
-		.start	= USBD_INT0,
-		.end	= USBD_INT0,
+		.start	= MX1_USBD_INT0,
+		.end	= MX1_USBD_INT0,
 		.flags	= IORESOURCE_IRQ,
 	}, {
-		.start	= USBD_INT1,
-		.end	= USBD_INT1,
+		.start	= MX1_USBD_INT1,
+		.end	= MX1_USBD_INT1,
 		.flags	= IORESOURCE_IRQ,
 	}, {
-		.start	= USBD_INT2,
-		.end	= USBD_INT2,
+		.start	= MX1_USBD_INT2,
+		.end	= MX1_USBD_INT2,
 		.flags	= IORESOURCE_IRQ,
 	}, {
-		.start	= USBD_INT3,
-		.end	= USBD_INT3,
+		.start	= MX1_USBD_INT3,
+		.end	= MX1_USBD_INT3,
 		.flags	= IORESOURCE_IRQ,
 	}, {
-		.start	= USBD_INT4,
-		.end	= USBD_INT4,
+		.start	= MX1_USBD_INT4,
+		.end	= MX1_USBD_INT4,
 		.flags	= IORESOURCE_IRQ,
 	}, {
-		.start	= USBD_INT5,
-		.end	= USBD_INT5,
+		.start	= MX1_USBD_INT5,
+		.end	= MX1_USBD_INT5,
 		.flags	= IORESOURCE_IRQ,
 	}, {
-		.start	= USBD_INT6,
-		.end	= USBD_INT6,
+		.start	= MX1_USBD_INT6,
+		.end	= MX1_USBD_INT6,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -215,23 +216,23 @@ struct platform_device imx_usb_device = {
 static struct mxc_gpio_port imx_gpio_ports[] = {
 	{
 		.chip.label = "gpio-0",
-		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR),
-		.irq = GPIO_INT_PORTA,
+		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR),
+		.irq = MX1_GPIO_INT_PORTA,
 		.virtual_irq_start = MXC_GPIO_IRQ_START,
 	}, {
 		.chip.label = "gpio-1",
-		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
-		.irq = GPIO_INT_PORTB,
+		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x100),
+		.irq = MX1_GPIO_INT_PORTB,
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
 	}, {
 		.chip.label = "gpio-2",
-		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
-		.irq = GPIO_INT_PORTC,
+		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x200),
+		.irq = MX1_GPIO_INT_PORTC,
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
 	}, {
 		.chip.label = "gpio-3",
-		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
-		.irq = GPIO_INT_PORTD,
+		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x300),
+		.irq = MX1_GPIO_INT_PORTD,
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
 	}
 };
diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-mx1/generic.c
index 7f9fc10..5a745d9 100644
--- a/arch/arm/mach-mx1/generic.c
+++ b/arch/arm/mach-mx1/generic.c
@@ -31,23 +31,22 @@
 
 static struct map_desc imx_io_desc[] __initdata = {
 	{
-		.virtual	= IMX_IO_BASE,
-		.pfn		= __phys_to_pfn(IMX_IO_PHYS),
-		.length		= IMX_IO_SIZE,
-		.type		= MT_DEVICE
+		.virtual = MX1_IO_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX1_IO_BASE_ADDR),
+		.length = MX1_IO_SIZE,
+		.type = MT_DEVICE
 	}
 };
 
 void __init mx1_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX1);
-	mxc_arch_reset_init(IO_ADDRESS(WDT_BASE_ADDR));
+	mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR));
 
 	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
 }
 
 void __init mx1_init_irq(void)
 {
-	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+	mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR));
 }
-
diff --git a/arch/arm/mach-mx1/mach-mx1ads.c b/arch/arm/mach-mx1/mach-mx1ads.c
index 51f3cfd..27c8222 100644
--- a/arch/arm/mach-mx1/mach-mx1ads.c
+++ b/arch/arm/mach-mx1/mach-mx1ads.c
@@ -75,8 +75,8 @@ static struct physmap_flash_data mx1ads_flash_data = {
 };
 
 static struct resource flash_resource = {
-	.start	= IMX_CS0_PHYS,
-	.end	= IMX_CS0_PHYS + SZ_32M - 1,
+	.start	= MX1_CS0_PHYS,
+	.end	= MX1_CS0_PHYS + SZ_32M - 1,
 	.flags	= IORESOURCE_MEM,
 };
 
@@ -145,8 +145,8 @@ struct sys_timer mx1ads_timer = {
 
 MACHINE_START(MX1ADS, "Freescale MX1ADS")
 	/* Maintainer: Sascha Hauer, Pengutronix */
-	.phys_io	= IMX_IO_PHYS,
-	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
+	.phys_io	= MX1_IO_BASE_ADDR,
+	.io_pg_offst	= (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params	= MX1_PHYS_OFFSET + 0x100,
 	.map_io		= mx1_map_io,
 	.init_irq	= mx1_init_irq,
@@ -155,8 +155,8 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
 MACHINE_END
 
 MACHINE_START(MXLADS, "Freescale MXLADS")
-	.phys_io	= IMX_IO_PHYS,
-	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
+	.phys_io	= MX1_IO_BASE_ADDR,
+	.io_pg_offst	= (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params	= MX1_PHYS_OFFSET + 0x100,
 	.map_io		= mx1_map_io,
 	.init_irq	= mx1_init_irq,
diff --git a/arch/arm/mach-mx1/mach-scb9328.c b/arch/arm/mach-mx1/mach-scb9328.c
index 7587a7a..7c6bbe8 100644
--- a/arch/arm/mach-mx1/mach-scb9328.c
+++ b/arch/arm/mach-mx1/mach-scb9328.c
@@ -31,8 +31,8 @@
  * This scb9328 has a 32MiB flash
  */
 static struct resource flash_resource = {
-	.start	= IMX_CS0_PHYS,
-	.end	= IMX_CS0_PHYS + (32 * 1024 * 1024) - 1,
+	.start	= MX1_CS0_PHYS,
+	.end	= MX1_CS0_PHYS + (32 * 1024 * 1024) - 1,
 	.flags	= IORESOURCE_MEM,
 };
 
@@ -70,13 +70,13 @@ static struct dm9000_plat_data dm9000_platdata = {
 static struct resource dm9000x_resources[] = {
 	{
 		.name	= "address area",
-		.start	= IMX_CS5_PHYS,
-		.end	= IMX_CS5_PHYS + 1,
+		.start	= MX1_CS5_PHYS,
+		.end	= MX1_CS5_PHYS + 1,
 		.flags	= IORESOURCE_MEM,	/* address access */
 	}, {
 		.name	= "data area",
-		.start	= IMX_CS5_PHYS + 4,
-		.end	= IMX_CS5_PHYS + 5,
+		.start	= MX1_CS5_PHYS + 4,
+		.end	= MX1_CS5_PHYS + 5,
 		.flags	= IORESOURCE_MEM,	/* data access */
 	}, {
 		.start	= IRQ_GPIOC(3),
-- 
1.7.0

[PATCH 05/16] arm/mx2/pca100: add #ifdef to fix compiler warning

[Uwe Kleine-König]

This fixes:

	arch/arm/mach-mx2/mach-pca100.c:261: warning: 'otg_pdata' defined but not used
	arch/arm/mach-mx2/mach-pca100.c:273: warning: 'usbh2_pdata' defined but not used

for build having USB_ULPI disabled.

Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
 arch/arm/mach-mx2/mach-pca100.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mx2/mach-pca100.c b/arch/arm/mach-mx2/mach-pca100.c
index 778fff2..da94279 100644
--- a/arch/arm/mach-mx2/mach-pca100.c
+++ b/arch/arm/mach-mx2/mach-pca100.c
@@ -252,6 +252,7 @@ static struct imxmmc_platform_data sdhc_pdata = {
 	.exit = pca100_sdhc2_exit,
 };
 
+#if defined(CONFIG_USB_ULPI)
 static int otg_phy_init(struct platform_device *pdev)
 {
 	gpio_set_value(OTG_PHY_CS_GPIO, 0);
@@ -275,6 +276,7 @@ static struct mxc_usbh_platform_data usbh2_pdata = {
 	.portsc	= MXC_EHCI_MODE_ULPI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
+#endif
 
 static struct fsl_usb2_platform_data otg_device_pdata = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
-- 
1.7.0

[PATCH 06/16] arm/mx1/scb9328: fix type of uart1_mxc_exit to make compiler happy

[Uwe Kleine-König]

This fixes:

	arch/arm/mach-mx1/mach-scb9328.c:120: warning: initialization from incompatible pointer type

Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
 arch/arm/mach-mx1/mach-scb9328.c |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-mx1/mach-scb9328.c b/arch/arm/mach-mx1/mach-scb9328.c
index 7c6bbe8..ed2ff16 100644
--- a/arch/arm/mach-mx1/mach-scb9328.c
+++ b/arch/arm/mach-mx1/mach-scb9328.c
@@ -108,11 +108,10 @@ static int uart1_mxc_init(struct platform_device *pdev)
 			ARRAY_SIZE(mxc_uart1_pins), "UART1");
 }
 
-static int uart1_mxc_exit(struct platform_device *pdev)
+static void uart1_mxc_exit(struct platform_device *pdev)
 {
 	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
 			ARRAY_SIZE(mxc_uart1_pins));
-	return 0;
 }
 
 static struct imxuart_platform_data uart_pdata = {
-- 
1.7.0

[PATCH 07/16] arm/mx2/mx27_3ds: document alternative names and remove empty header

[Uwe Kleine-König]

Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
 arch/arm/mach-mx2/mach-mx27_3ds.c              |    7 ++++++-
 arch/arm/plat-mxc/include/mach/board-mx27pdk.h |   14 --------------
 2 files changed, 6 insertions(+), 15 deletions(-)
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx27pdk.h

diff --git a/arch/arm/mach-mx2/mach-mx27_3ds.c b/arch/arm/mach-mx2/mach-mx27_3ds.c
index b2f4e0d..a45df59 100644
--- a/arch/arm/mach-mx2/mach-mx27_3ds.c
+++ b/arch/arm/mach-mx2/mach-mx27_3ds.c
@@ -18,6 +18,12 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+/*
+ * This machine is known as:
+ *  - i.MX27 3-Stack Development System
+ *  - i.MX27 Platform Development Kit (i.MX27 PDK)
+ */
+
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <asm/mach-types.h>
@@ -27,7 +33,6 @@
 #include <mach/common.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx27.h>
-#include <mach/board-mx27pdk.h>
 
 #include "devices.h"
 
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
deleted file mode 100644
index fec1bcf..0000000
--- a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX27PDK_H__
-#define __ASM_ARCH_MXC_BOARD_MX27PDK_H__
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX27PDK_H__ */
-- 
1.7.0

[PATCH 08/16] arm/imx: remove empty and unused board headers

[Uwe Kleine-König]

Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
 arch/arm/mach-mx2/mach-imx27lite.c                 |    1 -
 arch/arm/mach-mx3/mach-armadillo5x0.c              |    1 -
 arch/arm/mach-mx3/mach-pcm037.c                    |    1 -
 .../arm/plat-mxc/include/mach/board-armadillo5x0.h |   15 -------------
 arch/arm/plat-mxc/include/mach/board-mx27lite.h    |   14 ------------
 arch/arm/plat-mxc/include/mach/board-mx35pdk.h     |   22 --------------------
 arch/arm/plat-mxc/include/mach/board-pcm037.h      |   22 --------------------
 arch/arm/plat-mxc/include/mach/board-pcm043.h      |   22 --------------------
 8 files changed, 0 insertions(+), 98 deletions(-)
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx27lite.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx35pdk.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-pcm037.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-pcm043.h

diff --git a/arch/arm/mach-mx2/mach-imx27lite.c b/arch/arm/mach-mx2/mach-imx27lite.c
index b5710bf..fd1dddb 100644
--- a/arch/arm/mach-mx2/mach-imx27lite.c
+++ b/arch/arm/mach-mx2/mach-imx27lite.c
@@ -28,7 +28,6 @@
 #include <mach/common.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx27.h>
-#include <mach/board-mx27lite.h>
 
 #include "devices.h"
 
diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c
index 5f72ec9..2a8de89 100644
--- a/arch/arm/mach-mx3/mach-armadillo5x0.c
+++ b/arch/arm/mach-mx3/mach-armadillo5x0.c
@@ -50,7 +50,6 @@
 #include <mach/common.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
-#include <mach/board-armadillo5x0.h>
 #include <mach/mmc.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c
index 2df1ec5..86321b8 100644
--- a/arch/arm/mach-mx3/mach-pcm037.c
+++ b/arch/arm/mach-mx3/mach-pcm037.c
@@ -43,7 +43,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <mach/board-pcm037.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/i2c.h>
diff --git a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
deleted file mode 100644
index 0376c13..0000000
--- a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>.
- * All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
-#define __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27lite.h b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
deleted file mode 100644
index ea87551..0000000
--- a/arch/arm/plat-mxc/include/mach/board-mx27lite.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX27LITE_H__
-#define __ASM_ARCH_MXC_BOARD_MX27LITE_H__
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX27LITE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
deleted file mode 100644
index 383f1c0..0000000
--- a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX35PDK_H__
-#define __ASM_ARCH_MXC_BOARD_MX35PDK_H__
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX35PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h
deleted file mode 100644
index 1341170..0000000
--- a/arch/arm/plat-mxc/include/mach/board-pcm037.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  Copyright (C) 2008 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__
-#define __ASM_ARCH_MXC_BOARD_PCM037_H__
-
-#endif /* __ASM_ARCH_MXC_BOARD_PCM037_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm043.h b/arch/arm/plat-mxc/include/mach/board-pcm043.h
deleted file mode 100644
index 1ac4e16..0000000
--- a/arch/arm/plat-mxc/include/mach/board-pcm043.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  Copyright (C) 2008 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_PCM043_H__
-#define __ASM_ARCH_MXC_BOARD_PCM043_H__
-
-#endif /* __ASM_ARCH_MXC_BOARD_PCM043_H__ */
-- 
1.7.0

[PATCH 09/16] arm/mx2/mbimx27: compile fixes with CONFIG_TOUCHSCREEN_ADS7846=y

[Uwe Kleine-König]

This fixes:

	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:166: error: expected identifier or '(' before '||' token
	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:204: error: variable 'eukrea_mbimx27_spi_0_data' has initializer but incomplete type
	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:205: error: unknown field 'chipselect' specified in initializer
	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:205: warning: excess elements in struct initializer
	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:205: warning: (near initialization for 'eukrea_mbimx27_spi_0_data')
	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:206: error: unknown field 'num_chipselect' specified in initializer
	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:206: warning: excess elements in struct initializer
	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:206: warning: (near initialization for 'eukrea_mbimx27_spi_0_data')
	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c: In function 'eukrea_mbimx27_baseboard_init':
	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:239: error: implicit declaration of function 'ads7846_dev_init'

While at it add TOUCHSCREEN_ADS7846=m to mx27_defconfig.

Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
 arch/arm/configs/mx27_defconfig              |    2 +-
 arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c |    5 +++--
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig
index b4c1366..ceab3f9 100644
--- a/arch/arm/configs/mx27_defconfig
+++ b/arch/arm/configs/mx27_defconfig
@@ -623,7 +623,7 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
+CONFIG_TOUCHSCREEN_ADS7846=m
 # CONFIG_TOUCHSCREEN_AD7877 is not set
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 # CONFIG_TOUCHSCREEN_AD7879_SPI is not set
diff --git a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
index f3b169d..9e607a2 100644
--- a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
@@ -33,6 +33,7 @@
 #include <mach/hardware.h>
 #include <mach/mmc.h>
 #include <mach/imx-uart.h>
+#include <mach/spi.h>
 
 #include "devices.h"
 
@@ -162,7 +163,7 @@ static struct imxuart_platform_data uart_pdata[] = {
 	},
 };
 
-#if defined(CONFIG_TOUCHSCREEN_ADS7846)
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
 	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 
 #define ADS7846_PENDOWN (GPIO_PORTD | 25)
@@ -228,7 +229,7 @@ void __init eukrea_mbimx27_baseboard_init(void)
 	mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data);
 	mxc_register_device(&mxc_sdhc_device0, NULL);
 
-#if defined(CONFIG_TOUCHSCREEN_ADS7846)
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
 	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 	/* SPI and ADS7846 Touchscreen controler init */
 	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
-- 
1.7.0

[PATCH 10/16] arm/mx3/kzm_arm11_01: fold board header in its only user

[Uwe Kleine-König]

Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
 arch/arm/mach-mx3/mach-kzm_arm11_01.c           |   18 ++++++++++-
 arch/arm/plat-mxc/include/mach/board-kzmarm11.h |   39 -----------------------
 2 files changed, 17 insertions(+), 40 deletions(-)
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-kzmarm11.h

diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
index f085d5d..e60f5da 100644
--- a/arch/arm/mach-mx3/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
@@ -37,7 +37,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <mach/board-kzmarm11.h>
 #include <mach/clock.h>
 #include <mach/common.h>
 #include <mach/imx-uart.h>
@@ -51,6 +50,23 @@
 	IMX_IO_ADDRESS(x, MX31_CS5) ?:					\
 	MX31_IO_ADDRESS(x))
 
+/*
+ *  KZM-ARM11-01 Board Control Registers on FPGA
+ */
+#define KZM_ARM11_CTL1		(MX31_CS4_BASE_ADDR + 0x1000)
+#define KZM_ARM11_CTL2		(MX31_CS4_BASE_ADDR + 0x1001)
+#define KZM_ARM11_RSW1		(MX31_CS4_BASE_ADDR + 0x1002)
+#define KZM_ARM11_BACK_LIGHT	(MX31_CS4_BASE_ADDR + 0x1004)
+#define KZM_ARM11_FPGA_REV	(MX31_CS4_BASE_ADDR + 0x1008)
+#define KZM_ARM11_7SEG_LED	(MX31_CS4_BASE_ADDR + 0x1010)
+#define KZM_ARM11_LEDS		(MX31_CS4_BASE_ADDR + 0x1020)
+#define KZM_ARM11_DIPSW2	(MX31_CS4_BASE_ADDR + 0x1003)
+
+/*
+ * External UART for touch panel on FPGA
+ */
+#define KZM_ARM11_16550		(MX31_CS4_BASE_ADDR + 0x1050)
+
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 /*
  * KZM-ARM11-01 has an external UART on FPGA
diff --git a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
deleted file mode 100644
index 93cc66f..0000000
--- a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  Copyright (C) 2009  Yoichi Yuasa <yuasa@linux-mips.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-#ifndef __ARM_ARCH_BOARD_KZM_ARM11_H
-#define __ARM_ARCH_BOARD_KZM_ARM11_H
-
-/*
- *  KZM-ARM11-01 Board Control Registers on FPGA
- */
-#define KZM_ARM11_CTL1		(MX31_CS4_BASE_ADDR + 0x1000)
-#define KZM_ARM11_CTL2		(MX31_CS4_BASE_ADDR + 0x1001)
-#define KZM_ARM11_RSW1		(MX31_CS4_BASE_ADDR + 0x1002)
-#define KZM_ARM11_BACK_LIGHT	(MX31_CS4_BASE_ADDR + 0x1004)
-#define KZM_ARM11_FPGA_REV	(MX31_CS4_BASE_ADDR + 0x1008)
-#define KZM_ARM11_7SEG_LED	(MX31_CS4_BASE_ADDR + 0x1010)
-#define KZM_ARM11_LEDS		(MX31_CS4_BASE_ADDR + 0x1020)
-#define KZM_ARM11_DIPSW2	(MX31_CS4_BASE_ADDR + 0x1003)
-
-/*
- * External UART for touch panel on FPGA
- */
-#define KZM_ARM11_16550		(MX31_CS4_BASE_ADDR + 0x1050)
-
-#endif /* __ARM_ARCH_BOARD_KZM_ARM11_H */
-
-- 
1.7.0

[PATCH 11/16] arm/mx2/mx21ads: fold board header in its only user

[Uwe Kleine-König]

Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
 arch/arm/mach-mx2/mach-mx21ads.c               |   36 ++++++++++++++++-
 arch/arm/plat-mxc/include/mach/board-mx21ads.h |   52 ------------------------
 2 files changed, 35 insertions(+), 53 deletions(-)
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx21ads.h

diff --git a/arch/arm/mach-mx2/mach-mx21ads.c b/arch/arm/mach-mx2/mach-mx21ads.c
index 113e58d..99f2492 100644
--- a/arch/arm/mach-mx2/mach-mx21ads.c
+++ b/arch/arm/mach-mx2/mach-mx21ads.c
@@ -33,10 +33,44 @@
 #include <mach/iomux-mx21.h>
 #include <mach/mxc_nand.h>
 #include <mach/mmc.h>
-#include <mach/board-mx21ads.h>
 
 #include "devices.h"
 
+/*
+ * Memory-mapped I/O on MX21ADS base board
+ */
+#define MX21ADS_MMIO_BASE_ADDR   0xf5000000
+#define MX21ADS_MMIO_SIZE        SZ_16M
+
+#define MX21ADS_REG_ADDR(offset)    (void __force __iomem *) \
+		(MX21ADS_MMIO_BASE_ADDR + (offset))
+
+#define MX21ADS_CS8900A_IRQ         IRQ_GPIOE(11)
+#define MX21ADS_CS8900A_IOBASE_REG  MX21ADS_REG_ADDR(0x000000)
+#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
+#define MX21ADS_VERSION_REG         MX21ADS_REG_ADDR(0x400000)
+#define MX21ADS_IO_REG              MX21ADS_REG_ADDR(0x800000)
+
+/* MX21ADS_IO_REG bit definitions */
+#define MX21ADS_IO_SD_WP        0x0001 /* read */
+#define MX21ADS_IO_TP6          0x0001 /* write */
+#define MX21ADS_IO_SW_SEL       0x0002 /* read */
+#define MX21ADS_IO_TP7          0x0002 /* write */
+#define MX21ADS_IO_RESET_E_UART 0x0004
+#define MX21ADS_IO_RESET_BASE   0x0008
+#define MX21ADS_IO_CSI_CTL2     0x0010
+#define MX21ADS_IO_CSI_CTL1     0x0020
+#define MX21ADS_IO_CSI_CTL0     0x0040
+#define MX21ADS_IO_UART1_EN     0x0080
+#define MX21ADS_IO_UART4_EN     0x0100
+#define MX21ADS_IO_LCDON        0x0200
+#define MX21ADS_IO_IRDA_EN      0x0400
+#define MX21ADS_IO_IRDA_FIR_SEL 0x0800
+#define MX21ADS_IO_IRDA_MD0_B   0x1000
+#define MX21ADS_IO_IRDA_MD1     0x2000
+#define MX21ADS_IO_LED4_ON      0x4000
+#define MX21ADS_IO_LED3_ON      0x8000
+
 static unsigned int mx21ads_pins[] = {
 
 	/* CS8900A */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx21ads.h b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
deleted file mode 100644
index 0cf4fa2..0000000
--- a/arch/arm/plat-mxc/include/mach/board-mx21ads.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX21ADS_H__
-#define __ASM_ARCH_MXC_BOARD_MX21ADS_H__
-
-/*
- * Memory-mapped I/O on MX21ADS base board
- */
-#define MX21ADS_MMIO_BASE_ADDR   0xF5000000
-#define MX21ADS_MMIO_SIZE        SZ_16M
-
-#define MX21ADS_REG_ADDR(offset)    (void __force __iomem *) \
-		(MX21ADS_MMIO_BASE_ADDR + (offset))
-
-#define MX21ADS_CS8900A_IRQ         IRQ_GPIOE(11)
-#define MX21ADS_CS8900A_IOBASE_REG  MX21ADS_REG_ADDR(0x000000)
-#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
-#define MX21ADS_VERSION_REG         MX21ADS_REG_ADDR(0x400000)
-#define MX21ADS_IO_REG              MX21ADS_REG_ADDR(0x800000)
-
-/* MX21ADS_IO_REG bit definitions */
-#define MX21ADS_IO_SD_WP        0x0001 /* read */
-#define MX21ADS_IO_TP6          0x0001 /* write */
-#define MX21ADS_IO_SW_SEL       0x0002 /* read */
-#define MX21ADS_IO_TP7          0x0002 /* write */
-#define MX21ADS_IO_RESET_E_UART 0x0004
-#define MX21ADS_IO_RESET_BASE   0x0008
-#define MX21ADS_IO_CSI_CTL2     0x0010
-#define MX21ADS_IO_CSI_CTL1     0x0020
-#define MX21ADS_IO_CSI_CTL0     0x0040
-#define MX21ADS_IO_UART1_EN     0x0080
-#define MX21ADS_IO_UART4_EN     0x0100
-#define MX21ADS_IO_LCDON        0x0200
-#define MX21ADS_IO_IRDA_EN      0x0400
-#define MX21ADS_IO_IRDA_FIR_SEL 0x0800
-#define MX21ADS_IO_IRDA_MD0_B   0x1000
-#define MX21ADS_IO_IRDA_MD1     0x2000
-#define MX21ADS_IO_LED4_ON      0x4000
-#define MX21ADS_IO_LED3_ON      0x8000
-
-#endif				/* __ASM_ARCH_MXC_BOARD_MX21ADS_H__ */
-- 
1.7.0

[PATCH 12/16] arm/mx2/mx27ads: fold board header in its only user

[Uwe Kleine-König]

Moreover remove unused definitions.

Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
 arch/arm/mach-mx2/mach-mx27ads.c               |   32 ++-
 arch/arm/plat-mxc/include/mach/board-mx27ads.h |  344 ------------------------
 2 files changed, 30 insertions(+), 346 deletions(-)
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx27ads.h

diff --git a/arch/arm/mach-mx2/mach-mx27ads.c b/arch/arm/mach-mx2/mach-mx27ads.c
index 6ce3236..2183e3d 100644
--- a/arch/arm/mach-mx2/mach-mx27ads.c
+++ b/arch/arm/mach-mx2/mach-mx27ads.c
@@ -34,7 +34,6 @@
 #include <mach/gpio.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx27.h>
-#include <mach/board-mx27ads.h>
 #include <mach/mxc_nand.h>
 #include <mach/i2c.h>
 #include <mach/imxfb.h>
@@ -42,6 +41,36 @@
 
 #include "devices.h"
 
+/*
+ * Base address of PBC controller, CS4
+ */
+#define PBC_BASE_ADDRESS        0xf4300000
+#define PBC_REG_ADDR(offset)    (void __force __iomem *) \
+		(PBC_BASE_ADDRESS + (offset))
+
+/* When the PBC address connection is fixed in h/w, defined as 1 */
+#define PBC_ADDR_SH             0
+
+/* Offsets for the PBC Controller register */
+/*
+ * PBC Board version register offset
+ */
+#define PBC_VERSION_REG         PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 set address.
+ */
+#define PBC_BCTRL1_SET_REG      PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 clear address.
+ */
+#define PBC_BCTRL1_CLEAR_REG    PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
+
+/* PBC Board Control Register 1 bit definitions */
+#define PBC_BCTRL1_LCDON        0x0800	/* Enable the LCD */
+
+/* to determine the correct external crystal reference */
+#define CKIH_27MHZ_BIT_SET      (1 << 3)
+
 static unsigned int mx27ads_pins[] = {
 	/* UART0 */
 	PE12_PF_UART1_TXD,
@@ -342,4 +371,3 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
 	.init_machine   = mx27ads_board_init,
 	.timer          = &mx27ads_timer,
 MACHINE_END
-
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
deleted file mode 100644
index 7776d23..0000000
--- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h
+++ /dev/null
@@ -1,344 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later@the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX27ADS_H__
-#define __ASM_ARCH_MXC_BOARD_MX27ADS_H__
-
-/* external interrupt multiplexer */
-#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
-
-#define MXC_VIRTUAL_INTS_BASE	(MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES)
-#define MXC_SDIO1_CARD_IRQ	MXC_VIRTUAL_INTS_BASE
-#define MXC_SDIO2_CARD_IRQ	(MXC_VIRTUAL_INTS_BASE + 1)
-#define MXC_SDIO3_CARD_IRQ	(MXC_VIRTUAL_INTS_BASE + 2)
-
-#define MXC_MAX_BOARD_INTS      (MXC_MAX_EXP_IO_LINES + \
-				MXC_MAX_VIRTUAL_INTS)
-
-/*
- * @name Memory Size parameters
- */
-
-/*
- * Size of SDRAM memory
- */
-#define SDRAM_MEM_SIZE          SZ_128M
-
-/*
- * PBC Controller parameters
- */
-
-/*
- * Base address of PBC controller, CS4
- */
-#define PBC_BASE_ADDRESS        0xf4300000
-#define PBC_REG_ADDR(offset)    (void __force __iomem *) \
-		(PBC_BASE_ADDRESS + (offset))
-
-/*
- * PBC Interupt name definitions
- */
-#define PBC_GPIO1_0  0
-#define PBC_GPIO1_1  1
-#define PBC_GPIO1_2  2
-#define PBC_GPIO1_3  3
-#define PBC_GPIO1_4  4
-#define PBC_GPIO1_5  5
-
-#define PBC_INTR_MAX_NUM 6
-#define PBC_INTR_SHARED_MAX_NUM 8
-
-/* When the PBC address connection is fixed in h/w, defined as 1 */
-#define PBC_ADDR_SH             0
-
-/* Offsets for the PBC Controller register */
-/*
- * PBC Board version register offset
- */
-#define PBC_VERSION_REG         PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 1 set address.
- */
-#define PBC_BCTRL1_SET_REG      PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 1 clear address.
- */
-#define PBC_BCTRL1_CLEAR_REG    PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
-/*
- * PBC Board control register 2 set address.
- */
-#define PBC_BCTRL2_SET_REG      PBC_REG_ADDR(0x00010 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 2 clear address.
- */
-#define PBC_BCTRL2_CLEAR_REG    PBC_REG_ADDR(0x00014 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 3 set address.
- */
-#define PBC_BCTRL3_SET_REG      PBC_REG_ADDR(0x00018 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 3 clear address.
- */
-#define PBC_BCTRL3_CLEAR_REG    PBC_REG_ADDR(0x0001C >> PBC_ADDR_SH)
-/*
- * PBC Board control register 3 set address.
- */
-#define PBC_BCTRL4_SET_REG      PBC_REG_ADDR(0x00020 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 4 clear address.
- */
-#define PBC_BCTRL4_CLEAR_REG    PBC_REG_ADDR(0x00024 >> PBC_ADDR_SH)
-/*PBC_ADDR_SH
- * PBC Board status register 1.
- */
-#define PBC_BSTAT1_REG          PBC_REG_ADDR(0x00028 >> PBC_ADDR_SH)
-/*
- * PBC Board interrupt status register.
- */
-#define PBC_INTSTATUS_REG       PBC_REG_ADDR(0x0002C >> PBC_ADDR_SH)
-/*
- * PBC Board interrupt current status register.
- */
-#define PBC_INTCURR_STATUS_REG  PBC_REG_ADDR(0x00034 >> PBC_ADDR_SH)
-/*
- * PBC Interrupt mask register set address.
- */
-#define PBC_INTMASK_SET_REG     PBC_REG_ADDR(0x00038 >> PBC_ADDR_SH)
-/*
- * PBC Interrupt mask register clear address.
- */
-#define PBC_INTMASK_CLEAR_REG   PBC_REG_ADDR(0x0003C >> PBC_ADDR_SH)
-/*
- * External UART A.
- */
-#define PBC_SC16C652_UARTA_REG  PBC_REG_ADDR(0x20000 >> PBC_ADDR_SH)
-/*
- * UART 4 Expanding Signal Status.
- */
-#define PBC_UART_STATUS_REG     PBC_REG_ADDR(0x22000 >> PBC_ADDR_SH)
-/*
- * UART 4 Expanding Signal Control Set.
- */
-#define PBC_UCTRL_SET_REG       PBC_REG_ADDR(0x24000 >> PBC_ADDR_SH)
-/*
- * UART 4 Expanding Signal Control Clear.
- */
-#define PBC_UCTRL_CLR_REG       PBC_REG_ADDR(0x26000 >> PBC_ADDR_SH)
-/*
- * Ethernet Controller IO base address.
- */
-#define PBC_CS8900A_IOBASE_REG  PBC_REG_ADDR(0x40000 >> PBC_ADDR_SH)
-/*
- * Ethernet Controller Memory base address.
- */
-#define PBC_CS8900A_MEMBASE_REG PBC_REG_ADDR(0x42000 >> PBC_ADDR_SH)
-/*
- * Ethernet Controller DMA base address.
- */
-#define PBC_CS8900A_DMABASE_REG PBC_REG_ADDR(0x44000 >> PBC_ADDR_SH)
-
-/* PBC Board Version Register bit definition */
-#define PBC_VERSION_ADS         0x8000	/* Bit15=1 means version for ads */
-#define PBC_VERSION_EVB_REVB    0x4000	/* BIT14=1 means version for evb revb */
-
-/* PBC Board Control Register 1 bit definitions */
-#define PBC_BCTRL1_ERST         0x0001	/* Ethernet Reset */
-#define PBC_BCTRL1_URST         0x0002	/* Reset External UART controller */
-#define PBC_BCTRL1_FRST         0x0004	/* FEC Reset */
-#define PBC_BCTRL1_ESLEEP       0x0010	/* Enable ethernet Sleep */
-#define PBC_BCTRL1_LCDON        0x0800	/* Enable the LCD */
-
-/* PBC Board Control Register 2 bit definitions */
-#define PBC_BCTRL2_VCC_EN       0x0004	/*   Enable VCC */
-#define PBC_BCTRL2_VPP_EN       0x0008	/*   Enable Vpp */
-#define PBC_BCTRL2_ATAFEC_EN    0X0010
-#define PBC_BCTRL2_ATAFEC_SEL   0X0020
-#define PBC_BCTRL2_ATA_EN       0X0040
-#define PBC_BCTRL2_IRDA_SD      0X0080
-#define PBC_BCTRL2_IRDA_EN      0X0100
-#define PBC_BCTRL2_CCTL10       0X0200
-#define PBC_BCTRL2_CCTL11       0X0400
-
-/* PBC Board Control Register 3 bit definitions */
-#define PBC_BCTRL3_HSH_EN       0X0020
-#define PBC_BCTRL3_FSH_MOD      0X0040
-#define PBC_BCTRL3_OTG_HS_EN    0X0080
-#define PBC_BCTRL3_OTG_VBUS_EN  0X0100
-#define PBC_BCTRL3_FSH_VBUS_EN  0X0200
-#define PBC_BCTRL3_USB_OTG_ON   0X0800
-#define PBC_BCTRL3_USB_FSH_ON   0X1000
-
-/* PBC Board Control Register 4 bit definitions */
-#define PBC_BCTRL4_REGEN_SEL    0X0001
-#define PBC_BCTRL4_USER_OFF     0X0002
-#define PBC_BCTRL4_VIB_EN       0X0004
-#define PBC_BCTRL4_PWRGT1_EN    0X0008
-#define PBC_BCTRL4_PWRGT2_EN    0X0010
-#define PBC_BCTRL4_STDBY_PRI    0X0020
-
-#ifndef __ASSEMBLY__
-/*
- * Enumerations for SD cards and memory stick card. This corresponds to
- * the card EN bits in the IMR: SD1_EN | MS_EN | SD3_EN | SD2_EN.
- */
-enum mxc_card_no {
-	MXC_CARD_SD2 = 0,
-	MXC_CARD_SD3,
-	MXC_CARD_MS,
-	MXC_CARD_SD1,
-	MXC_CARD_MIN = MXC_CARD_SD2,
-	MXC_CARD_MAX = MXC_CARD_SD1,
-};
-#endif
-
-#define MXC_CPLD_VER_1_50       0x01
-
-/*
- * PBC BSTAT Register bit definitions
- */
-#define PBC_BSTAT_PRI_INT       0X0001
-#define PBC_BSTAT_USB_BYP       0X0002
-#define PBC_BSTAT_ATA_IOCS16    0X0004
-#define PBC_BSTAT_ATA_CBLID     0X0008
-#define PBC_BSTAT_ATA_DASP      0X0010
-#define PBC_BSTAT_PWR_RDY       0X0020
-#define PBC_BSTAT_SD3_WP        0X0100
-#define PBC_BSTAT_SD2_WP        0X0200
-#define PBC_BSTAT_SD1_WP        0X0400
-#define PBC_BSTAT_SD3_DET       0X0800
-#define PBC_BSTAT_SD2_DET       0X1000
-#define PBC_BSTAT_SD1_DET       0X2000
-#define PBC_BSTAT_MS_DET        0X4000
-#define PBC_BSTAT_SD3_DET_BIT   11
-#define PBC_BSTAT_SD2_DET_BIT   12
-#define PBC_BSTAT_SD1_DET_BIT   13
-#define PBC_BSTAT_MS_DET_BIT    14
-#define MXC_BSTAT_BIT(n)        ((n == MXC_CARD_SD2) ? PBC_BSTAT_SD2_DET : \
-				 ((n == MXC_CARD_SD3) ? PBC_BSTAT_SD3_DET : \
-				 ((n == MXC_CARD_SD1) ? PBC_BSTAT_SD1_DET : \
-				 ((n == MXC_CARD_MS) ? PBC_BSTAT_MS_DET : \
-					0x0))))
-
-/*
- * PBC UART Control Register bit definitions
- */
-#define PBC_UCTRL_DCE_DCD       0X0001
-#define PBC_UCTRL_DCE_DSR       0X0002
-#define PBC_UCTRL_DCE_RI        0X0004
-#define PBC_UCTRL_DTE_DTR       0X0100
-
-/*
- * PBC UART Status Register bit definitions
- */
-#define PBC_USTAT_DTE_DCD       0X0001
-#define PBC_USTAT_DTE_DSR       0X0002
-#define PBC_USTAT_DTE_RI        0X0004
-#define PBC_USTAT_DCE_DTR       0X0100
-
-/*
- * PBC Interupt mask register bit definitions
- */
-#define PBC_INTR_SD3_R_EN_BIT   4
-#define PBC_INTR_SD2_R_EN_BIT   0
-#define PBC_INTR_SD1_R_EN_BIT   6
-#define PBC_INTR_MS_R_EN_BIT    5
-#define PBC_INTR_SD3_EN_BIT     13
-#define PBC_INTR_SD2_EN_BIT     12
-#define PBC_INTR_MS_EN_BIT      14
-#define PBC_INTR_SD1_EN_BIT     15
-
-#define PBC_INTR_SD2_R_EN       0x0001
-#define PBC_INTR_LOW_BAT        0X0002
-#define PBC_INTR_OTG_FSOVER     0X0004
-#define PBC_INTR_FSH_OVER       0X0008
-#define PBC_INTR_SD3_R_EN       0x0010
-#define PBC_INTR_MS_R_EN        0x0020
-#define PBC_INTR_SD1_R_EN       0x0040
-#define PBC_INTR_FEC_INT        0X0080
-#define PBC_INTR_ENET_INT       0X0100
-#define PBC_INTR_OTGFS_INT      0X0200
-#define PBC_INTR_XUART_INT      0X0400
-#define PBC_INTR_CCTL12         0X0800
-#define PBC_INTR_SD2_EN         0x1000
-#define PBC_INTR_SD3_EN         0x2000
-#define PBC_INTR_MS_EN          0x4000
-#define PBC_INTR_SD1_EN         0x8000
-
-
-
-/* For interrupts like xuart, enet etc */
-#define EXPIO_PARENT_INT        IOMUX_TO_IRQ(MX27_PIN_TIN)
-#define MXC_MAX_EXP_IO_LINES    16
-
-/*
- * This corresponds to PBC_INTMASK_SET_REG at offset 0x38.
- *
- */
-#define EXPIO_INT_LOW_BAT       (MXC_EXP_IO_BASE + 1)
-#define EXPIO_INT_OTG_FS_OVR    (MXC_EXP_IO_BASE + 2)
-#define EXPIO_INT_FSH_OVR       (MXC_EXP_IO_BASE + 3)
-#define EXPIO_INT_RES4          (MXC_EXP_IO_BASE + 4)
-#define EXPIO_INT_RES5          (MXC_EXP_IO_BASE + 5)
-#define EXPIO_INT_RES6          (MXC_EXP_IO_BASE + 6)
-#define EXPIO_INT_FEC           (MXC_EXP_IO_BASE + 7)
-#define EXPIO_INT_ENET_INT      (MXC_EXP_IO_BASE + 8)
-#define EXPIO_INT_OTG_FS_INT    (MXC_EXP_IO_BASE + 9)
-#define EXPIO_INT_XUART_INTA    (MXC_EXP_IO_BASE + 10)
-#define EXPIO_INT_CCTL12_INT    (MXC_EXP_IO_BASE + 11)
-#define EXPIO_INT_SD2_EN        (MXC_EXP_IO_BASE + 12)
-#define EXPIO_INT_SD3_EN        (MXC_EXP_IO_BASE + 13)
-#define EXPIO_INT_MS_EN         (MXC_EXP_IO_BASE + 14)
-#define EXPIO_INT_SD1_EN        (MXC_EXP_IO_BASE + 15)
-
-/*
- * This is System IRQ used by CS8900A for interrupt generation
- * taken from platform.h
- */
-#define CS8900AIRQ              EXPIO_INT_ENET_INT
-/* This is I/O Base address used to access registers of CS8900A on MXC ADS */
-#define CS8900A_BASE_ADDRESS    (PBC_CS8900A_IOBASE_REG + 0x300)
-
-#define MXC_PMIC_INT_LINE       IOMUX_TO_IRQ(MX27_PIN_TOUT)
-
-/*
-* This is used to detect if the CPLD version is for mx27 evb board rev-a
-*/
-#define PBC_CPLD_VERSION_IS_REVA() \
-	((__raw_readw(PBC_VERSION_REG) & \
-	(PBC_VERSION_ADS | PBC_VERSION_EVB_REVB))\
-	== 0)
-
-/* This is used to active or inactive ata signal in CPLD .
- *  It is dependent with hardware
- */
-#define PBC_ATA_SIGNAL_ACTIVE() \
-	__raw_writew(           \
-		PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \
-		PBC_BCTRL2_CLEAR_REG)
-
-#define PBC_ATA_SIGNAL_INACTIVE() \
-	__raw_writew(  \
-		PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \
-		PBC_BCTRL2_SET_REG)
-
-#define MXC_BD_LED1             (1 << 5)
-#define MXC_BD_LED2             (1 << 6)
-#define MXC_BD_LED_ON(led) \
-	__raw_writew(led, PBC_BCTRL1_SET_REG)
-#define MXC_BD_LED_OFF(led) \
-	__raw_writew(led, PBC_BCTRL1_CLEAR_REG)
-
-/* to determine the correct external crystal reference */
-#define CKIH_27MHZ_BIT_SET      (1 << 3)
-
-#endif				/* __ASM_ARCH_MXC_BOARD_MX27ADS_H__ */
-- 
1.7.0

[PATCH 13/16] arm/mx3/qong: get rid of nearly empty header

[Uwe Kleine-König]

board-qong.h only defined a single symbol that was used only once.

Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
 arch/arm/mach-mx3/mach-qong.c               |    3 +--
 arch/arm/plat-mxc/include/mach/board-qong.h |   17 -----------------
 2 files changed, 1 insertions(+), 19 deletions(-)
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-qong.h

diff --git a/arch/arm/mach-mx3/mach-qong.c b/arch/arm/mach-mx3/mach-qong.c
index e5b5b83..62281ad 100644
--- a/arch/arm/mach-mx3/mach-qong.c
+++ b/arch/arm/mach-mx3/mach-qong.c
@@ -34,7 +34,6 @@
 #include <mach/common.h>
 #include <asm/page.h>
 #include <asm/setup.h>
-#include <mach/board-qong.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include "devices.h"
@@ -116,7 +115,7 @@ static struct physmap_flash_data qong_flash_data = {
 
 static struct resource qong_flash_resource = {
 	.start = MX31_CS0_BASE_ADDR,
-	.end = MX31_CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
+	.end = MX31_CS0_BASE_ADDR + SZ_128M - 1,
 	.flags = IORESOURCE_MEM,
 };
 
diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h
deleted file mode 100644
index 6d88c7a..0000000
--- a/arch/arm/plat-mxc/include/mach/board-qong.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_QONG_H__
-#define __ASM_ARCH_MXC_BOARD_QONG_H__
-
-/* NOR FLASH */
-#define QONG_NOR_SIZE		(128*1024*1024)
-
-#endif /* __ASM_ARCH_MXC_BOARD_QONG_H__ */
-- 
1.7.0

[PATCH 14/16] arm/mx3/mx31_3ds: fold board header in its only user

[Uwe Kleine-König]

Moreover remove unused definitions.

Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
 arch/arm/mach-mx3/mach-mx31_3ds.c |   41 +++++++++++++++++++++++++++++++-----
 1 files changed, 35 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index f54af1e..7ec2e81 100644
--- a/arch/arm/mach-mx3/mach-mx31_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -41,12 +41,41 @@
 #include <mach/spi.h>
 #include "devices.h"
 
-/*!
- * @file mx31_3ds.c
- *
- * @brief This file contains the board-specific initialization routines.
- *
- * @ingroup System
+/* Definitions for components on the Debug board */
+
+/* Base address of CPLD controller on the Debug board */
+#define DEBUG_BASE_ADDRESS		CS5_IO_ADDRESS(MX3x_CS5_BASE_ADDR)
+
+/* LAN9217 ethernet base address */
+#define LAN9217_BASE_ADDR		MX3x_CS5_BASE_ADDR
+
+/* CPLD config and interrupt base address */
+#define CPLD_ADDR			(DEBUG_BASE_ADDRESS + 0x20000)
+
+/* status, interrupt */
+#define CPLD_INT_STATUS_REG		(CPLD_ADDR + 0x10)
+#define CPLD_INT_MASK_REG		(CPLD_ADDR + 0x38)
+#define CPLD_INT_RESET_REG		(CPLD_ADDR + 0x20)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER1_REG		(CPLD_ADDR + 0x40)
+#define CPLD_MAGIC_NUMBER2_REG		(CPLD_ADDR + 0x48)
+/* CPLD code version */
+#define CPLD_CODE_VER_REG		(CPLD_ADDR + 0x50)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER3_REG		(CPLD_ADDR + 0x58)
+
+/* CPLD IRQ line for external uart, external ethernet etc */
+#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
+
+#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
+
+#define EXPIO_INT_ENET		(MXC_EXP_IO_BASE + 0)
+
+#define MXC_MAX_EXP_IO_LINES	16
+
+/*
+ * This file contains the board-specific initialization routines.
  */
 
 static int mx31_3ds_pins[] = {
-- 
1.7.0

[PATCH 15/16] arm/mx3/mx31ads: fold board header in its only user

[Uwe Kleine-König]

Moreover remove unused definitions.

Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
 arch/arm/mach-mx3/mach-mx31ads.c               |   42 +++++++-
 arch/arm/plat-mxc/include/mach/board-mx31ads.h |  117 ------------------------
 2 files changed, 36 insertions(+), 123 deletions(-)
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx31ads.h

diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c
index b3d1a18..6fa21fc 100644
--- a/arch/arm/mach-mx3/mach-mx31ads.c
+++ b/arch/arm/mach-mx3/mach-mx31ads.c
@@ -45,12 +45,42 @@
 
 #include "devices.h"
 
-/*!
- * @file mx31ads.c
- *
- * @brief This file contains the board-specific initialization routines.
- *
- * @ingroup System
+/* Base address of PBC controller */
+#define PBC_BASE_ADDRESS        MX31_CS4_BASE_ADDR_VIRT
+/* Offsets for the PBC Controller register */
+
+/* PBC Board interrupt status register */
+#define PBC_INTSTATUS           0x000016
+
+/* PBC Board interrupt current status register */
+#define PBC_INTCURR_STATUS      0x000018
+
+/* PBC Interrupt mask register set address */
+#define PBC_INTMASK_SET         0x00001A
+
+/* PBC Interrupt mask register clear address */
+#define PBC_INTMASK_CLEAR       0x00001C
+
+/* External UART A */
+#define PBC_SC16C652_UARTA      0x010000
+
+/* External UART B */
+#define PBC_SC16C652_UARTB      0x010010
+
+#define PBC_INTSTATUS_REG	(PBC_INTSTATUS + PBC_BASE_ADDRESS)
+#define PBC_INTMASK_SET_REG	(PBC_INTMASK_SET + PBC_BASE_ADDRESS)
+#define PBC_INTMASK_CLEAR_REG	(PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
+#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
+
+#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
+
+#define EXPIO_INT_XUART_INTA	(MXC_EXP_IO_BASE + 10)
+#define EXPIO_INT_XUART_INTB	(MXC_EXP_IO_BASE + 11)
+
+#define MXC_MAX_EXP_IO_LINES	16
+/*
+ * This file contains the board-specific initialization routines.
  */
 
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
deleted file mode 100644
index 095a199..0000000
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__
-#define __ASM_ARCH_MXC_BOARD_MX31ADS_H__
-
-#include <mach/hardware.h>
-
-/* Base address of PBC controller */
-#define PBC_BASE_ADDRESS        MX31_CS4_BASE_ADDR_VIRT
-/* Offsets for the PBC Controller register */
-
-/* PBC Board status register offset */
-#define PBC_BSTAT               0x000002
-
-/* PBC Board control register 1 set address */
-#define PBC_BCTRL1_SET          0x000004
-
-/* PBC Board control register 1 clear address */
-#define PBC_BCTRL1_CLEAR        0x000006
-
-/* PBC Board control register 2 set address */
-#define PBC_BCTRL2_SET          0x000008
-
-/* PBC Board control register 2 clear address */
-#define PBC_BCTRL2_CLEAR        0x00000A
-
-/* PBC Board control register 3 set address */
-#define PBC_BCTRL3_SET          0x00000C
-
-/* PBC Board control register 3 clear address */
-#define PBC_BCTRL3_CLEAR        0x00000E
-
-/* PBC Board control register 4 set address */
-#define PBC_BCTRL4_SET          0x000010
-
-/* PBC Board control register 4 clear address */
-#define PBC_BCTRL4_CLEAR        0x000012
-
-/* PBC Board status register 1 */
-#define PBC_BSTAT1              0x000014
-
-/* PBC Board interrupt status register */
-#define PBC_INTSTATUS           0x000016
-
-/* PBC Board interrupt current status register */
-#define PBC_INTCURR_STATUS      0x000018
-
-/* PBC Interrupt mask register set address */
-#define PBC_INTMASK_SET         0x00001A
-
-/* PBC Interrupt mask register clear address */
-#define PBC_INTMASK_CLEAR       0x00001C
-
-/* External UART A */
-#define PBC_SC16C652_UARTA      0x010000
-
-/* External UART B */
-#define PBC_SC16C652_UARTB      0x010010
-
-/* Ethernet Controller IO base address */
-#define PBC_CS8900A_IOBASE      0x020000
-
-/* Ethernet Controller Memory base address */
-#define PBC_CS8900A_MEMBASE     0x021000
-
-/* Ethernet Controller DMA base address */
-#define PBC_CS8900A_DMABASE     0x022000
-
-/* External chip select 0 */
-#define PBC_XCS0                0x040000
-
-/* LCD Display enable */
-#define PBC_LCD_EN_B            0x060000
-
-/* Code test debug enable */
-#define PBC_CODE_B              0x070000
-
-/* PSRAM memory select */
-#define PBC_PSRAM_B             0x5000000
-
-#define PBC_INTSTATUS_REG	(PBC_INTSTATUS + PBC_BASE_ADDRESS)
-#define PBC_INTCURR_STATUS_REG	(PBC_INTCURR_STATUS + PBC_BASE_ADDRESS)
-#define PBC_INTMASK_SET_REG	(PBC_INTMASK_SET + PBC_BASE_ADDRESS)
-#define PBC_INTMASK_CLEAR_REG	(PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
-#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
-
-#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
-#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
-
-#define EXPIO_INT_LOW_BAT	(MXC_EXP_IO_BASE + 0)
-#define EXPIO_INT_PB_IRQ	(MXC_EXP_IO_BASE + 1)
-#define EXPIO_INT_OTG_FS_OVR	(MXC_EXP_IO_BASE + 2)
-#define EXPIO_INT_FSH_OVR	(MXC_EXP_IO_BASE + 3)
-#define EXPIO_INT_RES4		(MXC_EXP_IO_BASE + 4)
-#define EXPIO_INT_RES5		(MXC_EXP_IO_BASE + 5)
-#define EXPIO_INT_RES6		(MXC_EXP_IO_BASE + 6)
-#define EXPIO_INT_RES7		(MXC_EXP_IO_BASE + 7)
-#define EXPIO_INT_ENET_INT	(MXC_EXP_IO_BASE + 8)
-#define EXPIO_INT_OTG_FS_INT	(MXC_EXP_IO_BASE + 9)
-#define EXPIO_INT_XUART_INTA	(MXC_EXP_IO_BASE + 10)
-#define EXPIO_INT_XUART_INTB	(MXC_EXP_IO_BASE + 11)
-#define EXPIO_INT_SYNTH_IRQ	(MXC_EXP_IO_BASE + 12)
-#define EXPIO_INT_CE_INT1	(MXC_EXP_IO_BASE + 13)
-#define EXPIO_INT_CE_INT2	(MXC_EXP_IO_BASE + 14)
-#define EXPIO_INT_RES15		(MXC_EXP_IO_BASE + 15)
-
-#define MXC_MAX_EXP_IO_LINES	16
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
-- 
1.7.0

[PATCH 16/16] arm/mxc: grammar fix

[Uwe Kleine-König]

Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
 .../plat-mxc/include/mach/board-eukrea_cpuimx27.h  |    2 +-
 arch/arm/plat-mxc/include/mach/board-mx31lilly.h   |    2 +-
 arch/arm/plat-mxc/include/mach/board-mx31lite.h    |    2 +-
 arch/arm/plat-mxc/include/mach/board-mx31moboard.h |    2 +-
 arch/arm/plat-mxc/include/mach/board-pcm038.h      |    2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
index a1fd583..45b2fb8 100644
--- a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
+++ b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
@@ -25,7 +25,7 @@
 #ifndef __ASSEMBLY__
 /*
  * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
+ * its own devices, it calls the baseboard's init function.
  * TODO: Add your own baseboard init function and call it from
  * inside eukrea_cpuimx27_init().
  *
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
index eb5a502..0df71bf 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
@@ -31,7 +31,7 @@ enum mx31lilly_boards {
 
 /*
  * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
+ * its own devices, it calls the baseboard's init function.
  */
 
 extern void mx31lilly_db_init(void);
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index 2b2da03..c1ad0ae 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -32,7 +32,7 @@ enum mx31lite_boards {
 
 /*
  * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
+ * its own devices, it calls the baseboard's init function.
  */
 
 extern void mx31lite_db_init(void);
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
index fc5fec9..bf494e3 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
@@ -30,7 +30,7 @@ enum mx31moboard_boards {
 
 /*
  * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
+ * its own devices, it calls the baseboard's init function.
  */
 
 extern void mx31moboard_devboard_init(void);
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h
index 410f978..6f371e3 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm038.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h
@@ -22,7 +22,7 @@
 #ifndef __ASSEMBLY__
 /*
  * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
+ * its own devices, it calls the baseboard's init function.
  * TODO: Add your own baseboard init function and call it from
  * inside pcm038_init().
  *
-- 
1.7.0

[PATCH 09/16] arm/mx2/mbimx27: compile fixes with CONFIG_TOUCHSCREEN_ADS7846=y

[Eric Bénard]

Hi Uwe,

Le 24/05/2010 21:55, Uwe Kleine-K?nig a ?crit :
> This fixes:
>
> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:166: error: expected identifier or '(' before '||' token
> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:204: error: variable 'eukrea_mbimx27_spi_0_data' has initializer but incomplete type
> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:205: error: unknown field 'chipselect' specified in initializer
> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:205: warning: excess elements in struct initializer
> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:205: warning: (near initialization for 'eukrea_mbimx27_spi_0_data')
> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:206: error: unknown field 'num_chipselect' specified in initializer
> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:206: warning: excess elements in struct initializer
> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:206: warning: (near initialization for 'eukrea_mbimx27_spi_0_data')
> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c: In function 'eukrea_mbimx27_baseboard_init':
> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:239: error: implicit declaration of function 'ads7846_dev_init'
>
> While at it add TOUCHSCREEN_ADS7846=m to mx27_defconfig.
>
I already fixed this in my patchset for this board :
http://lists.infradead.org/pipermail/linux-arm-kernel/2010-May/015826.html

Eric

[PATCH 09/16] arm/mx2/mbimx27: compile fixes with CONFIG_TOUCHSCREEN_ADS7846=y

[Uwe Kleine-König]

Hi Eric,

On Mon, May 24, 2010 at 10:10:55PM +0200, Eric B?nard wrote:
> Hi Uwe,
>
> Le 24/05/2010 21:55, Uwe Kleine-K?nig a ?crit :
>> This fixes:
>>
>> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:166: error: expected identifier or '(' before '||' token
>> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:204: error: variable 'eukrea_mbimx27_spi_0_data' has initializer but incomplete type
>> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:205: error: unknown field 'chipselect' specified in initializer
>> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:205: warning: excess elements in struct initializer
>> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:205: warning: (near initialization for 'eukrea_mbimx27_spi_0_data')
>> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:206: error: unknown field 'num_chipselect' specified in initializer
>> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:206: warning: excess elements in struct initializer
>> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:206: warning: (near initialization for 'eukrea_mbimx27_spi_0_data')
>> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c: In function 'eukrea_mbimx27_baseboard_init':
>> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:239: error: implicit declaration of function 'ads7846_dev_init'
>>
>> While at it add TOUCHSCREEN_ADS7846=m to mx27_defconfig.
>>
> I already fixed this in my patchset for this board :
> http://lists.infradead.org/pipermail/linux-arm-kernel/2010-May/015826.html

What do you think about adding TOUCHSCREEN_ADS7846=m to mx27_defconfig?

Other than that I'm OK with your patch, too.  I will remove this patch
from my queue.

Best regards and thanks
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-K?nig            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[PATCH 09/16] arm/mx2/mbimx27: compile fixes with CONFIG_TOUCHSCREEN_ADS7846=y

[Eric Bénard]

Hi Uwe,

Le 24/05/2010 22:34, Uwe Kleine-K?nig a ?crit :
> What do you think about adding TOUCHSCREEN_ADS7846=m to mx27_defconfig?
>
in fact I also sent a patch to update the defconfig for our boards's 
peripherals (for our board : 8250, ADS7846, libertas, LEDs, keyboard + 
for most iMX27 boards : SPI, LCD, USB host + Gadget) :
http://lists.infradead.org/pipermail/linux-arm-kernel/2010-May/015833.html

As a default, I put +CONFIG_TOUCHSCREEN_ADS7846=y : is it a problem to 
have it integrated and not configured as a module in the defconfig ?

Thanks,
Eric

[PATCH 01/16] arm/mx3: rename mach-mx35pdk.c to mach-mx35_3ds.c matching its arch number

[Fabio Estevam]

Uwe,

--- On Mon, 5/24/10, Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de> wrote:

> From: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
> Subject: [PATCH 01/16] arm/mx3: rename mach-mx35pdk.c to mach-mx35_3ds.c matching its arch number
> To: linux-arm-kernel at lists.infradead.org
> Cc: kernel at pengutronix.de
> Date: Monday, May 24, 2010, 4:55 PM
> Additional document all known names
> of that machine.
...

To make it consistent across other i.MX boards: shouldn't mach-mx5/board-mx51_babbage.c be also renamed?

Regards,

Fabio Estevam


      

[PATCH 05/16] arm/mx2/pca100: add #ifdef to fix compiler warning

[Wolfram Sang]

On Mon, May 24, 2010 at 09:55:40PM +0200, Uwe Kleine-K?nig wrote:
> This fixes:
> 
> 	arch/arm/mach-mx2/mach-pca100.c:261: warning: 'otg_pdata' defined but not used
> 	arch/arm/mach-mx2/mach-pca100.c:273: warning: 'usbh2_pdata' defined but not used
> 
> for build having USB_ULPI disabled.

See:

http://article.gmane.org/gmane.linux.ports.arm.kernel/80438/

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 197 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20100525/cb9af6da/attachment.sig>

[PATCH 14/16] arm/mx3/mx31_3ds: fold board header in its only user

[Sascha Hauer]

On Mon, May 24, 2010 at 09:55:49PM +0200, Uwe Kleine-K?nig wrote:
> Moreover remove unused definitions.

The patch does not match the subject. Are there hunks missing?

Sascah

> 
> Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
> ---
>  arch/arm/mach-mx3/mach-mx31_3ds.c |   41 +++++++++++++++++++++++++++++++-----
>  1 files changed, 35 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
> index f54af1e..7ec2e81 100644
> --- a/arch/arm/mach-mx3/mach-mx31_3ds.c
> +++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
> @@ -41,12 +41,41 @@
>  #include <mach/spi.h>
>  #include "devices.h"
>  
> -/*!
> - * @file mx31_3ds.c
> - *
> - * @brief This file contains the board-specific initialization routines.
> - *
> - * @ingroup System
> +/* Definitions for components on the Debug board */
> +
> +/* Base address of CPLD controller on the Debug board */
> +#define DEBUG_BASE_ADDRESS		CS5_IO_ADDRESS(MX3x_CS5_BASE_ADDR)
> +
> +/* LAN9217 ethernet base address */
> +#define LAN9217_BASE_ADDR		MX3x_CS5_BASE_ADDR
> +
> +/* CPLD config and interrupt base address */
> +#define CPLD_ADDR			(DEBUG_BASE_ADDRESS + 0x20000)
> +
> +/* status, interrupt */
> +#define CPLD_INT_STATUS_REG		(CPLD_ADDR + 0x10)
> +#define CPLD_INT_MASK_REG		(CPLD_ADDR + 0x38)
> +#define CPLD_INT_RESET_REG		(CPLD_ADDR + 0x20)
> +/* magic word for debug CPLD */
> +#define CPLD_MAGIC_NUMBER1_REG		(CPLD_ADDR + 0x40)
> +#define CPLD_MAGIC_NUMBER2_REG		(CPLD_ADDR + 0x48)
> +/* CPLD code version */
> +#define CPLD_CODE_VER_REG		(CPLD_ADDR + 0x50)
> +/* magic word for debug CPLD */
> +#define CPLD_MAGIC_NUMBER3_REG		(CPLD_ADDR + 0x58)
> +
> +/* CPLD IRQ line for external uart, external ethernet etc */
> +#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
> +
> +#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
> +#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
> +
> +#define EXPIO_INT_ENET		(MXC_EXP_IO_BASE + 0)
> +
> +#define MXC_MAX_EXP_IO_LINES	16
> +
> +/*
> + * This file contains the board-specific initialization routines.
>   */
>  
>  static int mx31_3ds_pins[] = {
> -- 
> 1.7.0
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[PATCH 01/16] arm/mx3: rename mach-mx35pdk.c to mach-mx35_3ds.c matching its arch number

[Uwe Kleine-König]

Hello Fabio,

On Mon, May 24, 2010 at 03:20:59PM -0700, Fabio Estevam wrote:
> --- On Mon, 5/24/10, Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de> wrote:
> 
> > From: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
> > Subject: [PATCH 01/16] arm/mx3: rename mach-mx35pdk.c to mach-mx35_3ds.c matching its arch number
> > To: linux-arm-kernel at lists.infradead.org
> > Cc: kernel at pengutronix.de
> > Date: Monday, May 24, 2010, 4:55 PM
> > Additional document all known names
> > of that machine.
> ...
> 
> To make it consistent across other i.MX boards: shouldn't
> mach-mx5/board-mx51_babbage.c be also renamed?
IMHO yes, but Amit considered "board" to be better than "mach", so I
dropped that.  The longer term plan is to consolidate all imx platforms
in a single directory.  For that all files need to be touched anyhow and
then I would discuss this again.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-K?nig            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[PATCH 14/16] arm/mx3/mx31_3ds: fold board header in its only user

[Alberto Panizzo]

Hi Uwe,
On lun, 2010-05-24 at 21:55 +0200, Uwe Kleine-K?nig wrote:
> Moreover remove unused definitions.
> 
> Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
> ---
>  arch/arm/mach-mx3/mach-mx31_3ds.c |   41 +++++++++++++++++++++++++++++++-----
>  1 files changed, 35 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
> index f54af1e..7ec2e81 100644
> --- a/arch/arm/mach-mx3/mach-mx31_3ds.c
> +++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
> @@ -41,12 +41,41 @@
>  #include <mach/spi.h>
>  #include "devices.h"
>  
> -/*!
> - * @file mx31_3ds.c
> - *
> - * @brief This file contains the board-specific initialization routines.
> - *
> - * @ingroup System
> +/* Definitions for components on the Debug board */
> +
> +/* Base address of CPLD controller on the Debug board */
> +#define DEBUG_BASE_ADDRESS		CS5_IO_ADDRESS(MX3x_CS5_BASE_ADDR)
> +
> +/* LAN9217 ethernet base address */
> +#define LAN9217_BASE_ADDR		MX3x_CS5_BASE_ADDR
> +
> +/* CPLD config and interrupt base address */
> +#define CPLD_ADDR			(DEBUG_BASE_ADDRESS + 0x20000)
> +
> +/* status, interrupt */
> +#define CPLD_INT_STATUS_REG		(CPLD_ADDR + 0x10)
> +#define CPLD_INT_MASK_REG		(CPLD_ADDR + 0x38)
> +#define CPLD_INT_RESET_REG		(CPLD_ADDR + 0x20)
> +/* magic word for debug CPLD */
> +#define CPLD_MAGIC_NUMBER1_REG		(CPLD_ADDR + 0x40)
> +#define CPLD_MAGIC_NUMBER2_REG		(CPLD_ADDR + 0x48)
> +/* CPLD code version */
> +#define CPLD_CODE_VER_REG		(CPLD_ADDR + 0x50)
> +/* magic word for debug CPLD */
> +#define CPLD_MAGIC_NUMBER3_REG		(CPLD_ADDR + 0x58)
> +
> +/* CPLD IRQ line for external uart, external ethernet etc */
> +#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
> +
> +#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
> +#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
> +
> +#define EXPIO_INT_ENET		(MXC_EXP_IO_BASE + 0)
> +
> +#define MXC_MAX_EXP_IO_LINES	16
> +
> +/*
> + * This file contains the board-specific initialization routines.
>   */
>  
>  static int mx31_3ds_pins[] = {

I agree on this patch but it seems you missed to remove the header
file plat-mxc/include/mach/board-mx31_3ds.h

Best Regards,

-- 
Alberto!

        Be Persistent!
                - Greg Kroah-Hartman (FOSDEM 2010)

[PATCH 13/16 v2] arm/mx3/mx31_3ds: fold board header in its only user

[Uwe Kleine-König]

Moreover remove unused definitions.

Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
Hello Sascha, hello Alberto,

thanks for your feedback.  This patch additionally removes board-mx31_3ds.h.

Best regards
Uwe

 arch/arm/mach-mx3/mach-mx31_3ds.c               |   41 +++++++++++++--
 arch/arm/plat-mxc/include/mach/board-mx31_3ds.h |   59 -----------------------
 2 files changed, 35 insertions(+), 65 deletions(-)
 delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx31_3ds.h

diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index f54af1e..7ec2e81 100644
--- a/arch/arm/mach-mx3/mach-mx31_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -41,12 +41,41 @@
 #include <mach/spi.h>
 #include "devices.h"
 
-/*!
- * @file mx31_3ds.c
- *
- * @brief This file contains the board-specific initialization routines.
- *
- * @ingroup System
+/* Definitions for components on the Debug board */
+
+/* Base address of CPLD controller on the Debug board */
+#define DEBUG_BASE_ADDRESS		CS5_IO_ADDRESS(MX3x_CS5_BASE_ADDR)
+
+/* LAN9217 ethernet base address */
+#define LAN9217_BASE_ADDR		MX3x_CS5_BASE_ADDR
+
+/* CPLD config and interrupt base address */
+#define CPLD_ADDR			(DEBUG_BASE_ADDRESS + 0x20000)
+
+/* status, interrupt */
+#define CPLD_INT_STATUS_REG		(CPLD_ADDR + 0x10)
+#define CPLD_INT_MASK_REG		(CPLD_ADDR + 0x38)
+#define CPLD_INT_RESET_REG		(CPLD_ADDR + 0x20)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER1_REG		(CPLD_ADDR + 0x40)
+#define CPLD_MAGIC_NUMBER2_REG		(CPLD_ADDR + 0x48)
+/* CPLD code version */
+#define CPLD_CODE_VER_REG		(CPLD_ADDR + 0x50)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER3_REG		(CPLD_ADDR + 0x58)
+
+/* CPLD IRQ line for external uart, external ethernet etc */
+#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
+
+#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
+
+#define EXPIO_INT_ENET		(MXC_EXP_IO_BASE + 0)
+
+#define MXC_MAX_EXP_IO_LINES	16
+
+/*
+ * This file contains the board-specific initialization routines.
  */
 
 static int mx31_3ds_pins[] = {
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h b/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h
deleted file mode 100644
index da92933..0000000
--- a/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31_3DS_H__
-#define __ASM_ARCH_MXC_BOARD_MX31_3DS_H__
-
-/* Definitions for components on the Debug board */
-
-/* Base address of CPLD controller on the Debug board */
-#define DEBUG_BASE_ADDRESS		CS5_IO_ADDRESS(CS5_BASE_ADDR)
-
-/* LAN9217 ethernet base address */
-#define LAN9217_BASE_ADDR		CS5_BASE_ADDR
-
-/* CPLD config and interrupt base address */
-#define CPLD_ADDR			(DEBUG_BASE_ADDRESS + 0x20000)
-
-/* LED switchs */
-#define CPLD_LED_REG			(CPLD_ADDR + 0x00)
-/* buttons */
-#define CPLD_SWITCH_BUTTONS_REG	(EXPIO_ADDR + 0x08)
-/* status, interrupt */
-#define CPLD_INT_STATUS_REG		(CPLD_ADDR + 0x10)
-#define CPLD_INT_MASK_REG		(CPLD_ADDR + 0x38)
-#define CPLD_INT_RESET_REG		(CPLD_ADDR + 0x20)
-/* magic word for debug CPLD */
-#define CPLD_MAGIC_NUMBER1_REG		(CPLD_ADDR + 0x40)
-#define CPLD_MAGIC_NUMBER2_REG		(CPLD_ADDR + 0x48)
-/* CPLD code version */
-#define CPLD_CODE_VER_REG		(CPLD_ADDR + 0x50)
-/* magic word for debug CPLD */
-#define CPLD_MAGIC_NUMBER3_REG		(CPLD_ADDR + 0x58)
-/* module reset register */
-#define CPLD_MODULE_RESET_REG		(CPLD_ADDR + 0x60)
-/* CPU ID and Personality ID */
-#define CPLD_MCU_BOARD_ID_REG		(CPLD_ADDR + 0x68)
-
-/* CPLD IRQ line for external uart, external ethernet etc */
-#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
-
-#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
-#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
-
-#define EXPIO_INT_ENET		(MXC_EXP_IO_BASE + 0)
-#define EXPIO_INT_XUART_A	(MXC_EXP_IO_BASE + 1)
-#define EXPIO_INT_XUART_B	(MXC_EXP_IO_BASE + 2)
-#define EXPIO_INT_BUTTON_A	(MXC_EXP_IO_BASE + 3)
-#define EXPIO_INT_BUTTON_B	(MXC_EXP_IO_BASE + 4)
-
-#define MXC_MAX_EXP_IO_LINES	16
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ */
-- 
1.7.0

[PATCH 05/16] arm/mx2/pca100: add #ifdef to fix compiler warning

[Uwe Kleine-König]

Hello Wolfram,

On Tue, May 25, 2010 at 02:06:56AM +0200, Wolfram Sang wrote:
> On Mon, May 24, 2010 at 09:55:40PM +0200, Uwe Kleine-K?nig wrote:
> > This fixes:
> > 
> > 	arch/arm/mach-mx2/mach-pca100.c:261: warning: 'otg_pdata' defined but not used
> > 	arch/arm/mach-mx2/mach-pca100.c:273: warning: 'usbh2_pdata' defined but not used
> > 
> > for build having USB_ULPI disabled.
> 
> See:
> 
> http://article.gmane.org/gmane.linux.ports.arm.kernel/80438/
ah, OK, your patch looks more complete.  I dropped my patch and took
your's instead.  While at it I took "[PATCH] pcm037: fix build warning",
too.

Thanks
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-K?nig            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[PATCH 05/16] arm/mx2/pca100: add #ifdef to fix compiler warning

[Wolfram Sang]

On Tue, May 25, 2010 at 11:04:31AM +0200, Uwe Kleine-K?nig wrote:

> ah, OK, your patch looks more complete.  I dropped my patch and took
> your's instead.  While at it I took "[PATCH] pcm037: fix build warning",
> too.

Hmm, your patches are for 2.6.36; I think these build-fixes should go to
2.6.35 (if Sascha's pull request for mxc-master will be accepted, that is).
Otherwise, OK.

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 197 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20100525/6c7d973c/attachment.sig>

[PATCH 05/16] arm/mx2/pca100: add #ifdef to fix compiler warning

[Uwe Kleine-König]

On Tue, May 25, 2010 at 12:57:30PM +0200, Wolfram Sang wrote:
> On Tue, May 25, 2010 at 11:04:31AM +0200, Uwe Kleine-K?nig wrote:
> 
> > ah, OK, your patch looks more complete.  I dropped my patch and took
> > your's instead.  While at it I took "[PATCH] pcm037: fix build warning",
> > too.
> 
> Hmm, your patches are for 2.6.36; I think these build-fixes should go to
> 2.6.35 (if Sascha's pull request for mxc-master will be accepted, that is).
> Otherwise, OK.
They only fix warnings but shouldn't make any difference for the
generated code.  So I think 2.6.36 is OK.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-K?nig            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[PATCH 09/16] arm/mx2/mbimx27: compile fixes with CONFIG_TOUCHSCREEN_ADS7846=y

[Uwe Kleine-König]

Hi Eric,

On Mon, May 24, 2010 at 10:34:28PM +0200, Uwe Kleine-K?nig wrote:
> On Mon, May 24, 2010 at 10:10:55PM +0200, Eric B?nard wrote:
> > Hi Uwe,
> >
> > Le 24/05/2010 21:55, Uwe Kleine-K?nig a ?crit :
> >> This fixes:
> >>
> >> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:166: error: expected identifier or '(' before '||' token
> >> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:204: error: variable 'eukrea_mbimx27_spi_0_data' has initializer but incomplete type
> >> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:205: error: unknown field 'chipselect' specified in initializer
> >> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:205: warning: excess elements in struct initializer
> >> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:205: warning: (near initialization for 'eukrea_mbimx27_spi_0_data')
> >> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:206: error: unknown field 'num_chipselect' specified in initializer
> >> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:206: warning: excess elements in struct initializer
> >> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:206: warning: (near initialization for 'eukrea_mbimx27_spi_0_data')
> >> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c: In function 'eukrea_mbimx27_baseboard_init':
> >> 	arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c:239: error: implicit declaration of function 'ads7846_dev_init'
> >>
> >> While at it add TOUCHSCREEN_ADS7846=m to mx27_defconfig.
> >>
> > I already fixed this in my patchset for this board :
> > http://lists.infradead.org/pipermail/linux-arm-kernel/2010-May/015826.html
> 
> What do you think about adding TOUCHSCREEN_ADS7846=m to mx27_defconfig?
> 
> Other than that I'm OK with your patch, too.  I will remove this patch
> from my queue.
If we want to have ADS7846 at least compilable in .35 we should go with
my patch as your's is (IMHO) too intrusive after -rc1.

Sascha?

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-K?nig            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[PATCH 09/16] arm/mx2/mbimx27: compile fixes with CONFIG_TOUCHSCREEN_ADS7846=y

[Eric Bénard]

Hi Uwe,

Le 22/06/2010 18:13, Uwe Kleine-K?nig a ?crit :
> On Mon, May 24, 2010 at 10:34:28PM +0200, Uwe Kleine-K?nig wrote:
>> What do you think about adding TOUCHSCREEN_ADS7846=m to mx27_defconfig?
>>
>> Other than that I'm OK with your patch, too.  I will remove this patch
>> from my queue.
> If we want to have ADS7846 at least compilable in .35 we should go with
> my patch as your's is (IMHO) too intrusive after -rc1.
>
unless this has changed recently, this board is not in mx27_defconfig 
for 2.6.35-rc nor in Sasha's tree so adding  TOUCHSCREEN_ADS7846=m to 
defconfig shouldn't break anything.

Eric

[PATCH 09/16] arm/mx2/mbimx27: compile fixes with CONFIG_TOUCHSCREEN_ADS7846=y

[Uwe Kleine-König]

Hello,

> If we want to have ADS7846 at least compilable in .35 we should go with
> my patch as your's is (IMHO) too intrusive after -rc1.
I have somehow missed that Eric's patch is already in Sascha's
for-2.6.35 branch.  So there is nothing to do.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-K?nig            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |