* [PATCH 00/16] omap mux updates for 2.6.36 merge window
@ 2010-06-30 12:06 Tony Lindgren
2010-06-30 12:06 ` [PATCH 01/16] omap: mux: Fix omap_mux_init_gpio for omap24xx Tony Lindgren
` (15 more replies)
0 siblings, 16 replies; 23+ messages in thread
From: Tony Lindgren @ 2010-06-30 12:06 UTC (permalink / raw)
To: linux-arm-kernel
Hi all,
This series converts the remaining mach-omap2 code to use the
new mux framework that's already in use for omap3. After this
series we still need to add the mux data for omap4.
Regards,
Tony
---
Tony Lindgren (16):
omap: mux: Fix omap_mux_init_gpio for omap24xx
omap: mux: Renumber package defines to make room for older 24xx packages
omap: mux: Allow compiling in new mux code on all mach-omap2 systems
omap: mux: Remove unncessary parens from mux34xx.c
omap: mux: Add data for 2420
omap: mux: Add data for 2430
omap: mux: Select SIP package for H4
omap: mux: Select POP package for Apollon
omap: mux: Select POP package for N8X0
omap: mux: Select POP package for 2430SDP
omap: mux: Make omap2 FS USB code use new mux functions
omap: mux: Do keypad muxing in board-*.c files
omap: mux: Mux Apollon LCD power in board-apollon.c
omap: mux: Mux 2430 USB0HS_STP in board-2430.c
omap: mux: Convert 2420 platform init code to use new mux code
omap: mux: Remove old mux code
arch/arm/mach-omap1/board-fsample.c | 12
arch/arm/mach-omap1/board-h2.c | 13
arch/arm/mach-omap1/board-h3.c | 13
arch/arm/mach-omap1/board-perseus2.c | 12
arch/arm/mach-omap2/Kconfig | 10
arch/arm/mach-omap2/Makefile | 2
arch/arm/mach-omap2/board-2430sdp.c | 15
arch/arm/mach-omap2/board-3630sdp.c | 1
arch/arm/mach-omap2/board-apollon.c | 28 +
arch/arm/mach-omap2/board-generic.c | 1
arch/arm/mach-omap2/board-h4.c | 36 +
arch/arm/mach-omap2/board-n8x0.c | 11
arch/arm/mach-omap2/board-rx51-peripherals.c | 1
arch/arm/mach-omap2/board-rx51-video.c | 1
arch/arm/mach-omap2/devices.c | 25 -
arch/arm/mach-omap2/i2c.c | 27 -
arch/arm/mach-omap2/io.c | 2
arch/arm/mach-omap2/mcbsp.c | 13
arch/arm/mach-omap2/mux.c | 308 ----------
arch/arm/mach-omap2/mux.h | 28 +
arch/arm/mach-omap2/mux2420.c | 688 +++++++++++++++++++++++
arch/arm/mach-omap2/mux2420.h | 282 +++++++++
arch/arm/mach-omap2/mux2430.c | 791 ++++++++++++++++++++++++++
arch/arm/mach-omap2/mux2430.h | 370 ++++++++++++
arch/arm/mach-omap2/mux34xx.c | 8
arch/arm/mach-omap2/pm24xx.c | 1
arch/arm/mach-omap2/usb-ehci.c | 1
arch/arm/mach-omap2/usb-fs.c | 33 +
arch/arm/mach-omap2/usb-musb.c | 1
arch/arm/mach-omap2/usb-tusb6010.c | 14
arch/arm/plat-omap/devices.c | 61 --
arch/arm/plat-omap/include/plat/mux.h | 220 -------
arch/arm/plat-omap/mux.c | 2
drivers/usb/musb/omap2430.c | 4
drivers/video/omap/lcd_apollon.c | 3
35 files changed, 2359 insertions(+), 679 deletions(-)
create mode 100644 arch/arm/mach-omap2/mux2420.c
create mode 100644 arch/arm/mach-omap2/mux2420.h
create mode 100644 arch/arm/mach-omap2/mux2430.c
create mode 100644 arch/arm/mach-omap2/mux2430.h
--
Signature
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 01/16] omap: mux: Fix omap_mux_init_gpio for omap24xx
2010-06-30 12:06 [PATCH 00/16] omap mux updates for 2.6.36 merge window Tony Lindgren
@ 2010-06-30 12:06 ` Tony Lindgren
2010-06-30 12:06 ` [PATCH 02/16] omap: mux: Renumber package defines to make room for older 24xx packages Tony Lindgren
` (14 subsequent siblings)
15 siblings, 0 replies; 23+ messages in thread
From: Tony Lindgren @ 2010-06-30 12:06 UTC (permalink / raw)
To: linux-arm-kernel
Looks like 24xx uses mode3 instead of mode4 for muxable GPIO pins.
This will be needed when 24xx mux code is converted to use the new
mux functions.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/mux.c | 10 +++++++++-
1 files changed, 9 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 8b3d269..76b5bf7 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -43,6 +43,7 @@
#define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */
#define OMAP_MUX_BASE_SZ 0x5ca
+#define MUXABLE_GPIO_MODE3 BIT(0)
struct omap_mux_entry {
struct omap_mux mux;
@@ -51,6 +52,7 @@ struct omap_mux_entry {
static unsigned long mux_phys;
static void __iomem *mux_base;
+static u8 omap_mux_flags;
u16 omap_mux_read(u16 reg)
{
@@ -394,7 +396,10 @@ int __init omap_mux_init_gpio(int gpio, int val)
old_mode = omap_mux_read(m->reg_offset);
mux_mode = val & ~(OMAP_MUX_NR_MODES - 1);
- mux_mode |= OMAP_MUX_MODE4;
+ if (omap_mux_flags & MUXABLE_GPIO_MODE3)
+ mux_mode |= OMAP_MUX_MODE3;
+ else
+ mux_mode |= OMAP_MUX_MODE4;
printk(KERN_DEBUG "mux: Setting signal "
"%s.gpio%i 0x%04x -> 0x%04x\n",
m->muxnames[0], gpio, old_mode, mux_mode);
@@ -1032,6 +1037,9 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
return -ENODEV;
}
+ if (cpu_is_omap24xx())
+ omap_mux_flags = MUXABLE_GPIO_MODE3;
+
omap_mux_init_package(superset, package_subset, package_balls);
omap_mux_init_list(superset);
omap_mux_init_signals(board_mux);
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 02/16] omap: mux: Renumber package defines to make room for older 24xx packages
2010-06-30 12:06 [PATCH 00/16] omap mux updates for 2.6.36 merge window Tony Lindgren
2010-06-30 12:06 ` [PATCH 01/16] omap: mux: Fix omap_mux_init_gpio for omap24xx Tony Lindgren
@ 2010-06-30 12:06 ` Tony Lindgren
2010-06-30 12:06 ` [PATCH 03/16] omap: mux: Allow compiling in new mux code on all mach-omap2 systems Tony Lindgren
` (13 subsequent siblings)
15 siblings, 0 replies; 23+ messages in thread
From: Tony Lindgren @ 2010-06-30 12:06 UTC (permalink / raw)
To: linux-arm-kernel
Only POP and SIP are known to exist for 2420, 2430 seems to only have
SIP package available.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/mux.h | 10 ++++++----
1 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index 480abc5..46315f2 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -56,10 +56,12 @@
/* Flags for omap_mux_init */
#define OMAP_PACKAGE_MASK 0xffff
-#define OMAP_PACKAGE_CBP 4 /* 515-pin 0.40 0.50 */
-#define OMAP_PACKAGE_CUS 3 /* 423-pin 0.65 */
-#define OMAP_PACKAGE_CBB 2 /* 515-pin 0.40 0.50 */
-#define OMAP_PACKAGE_CBC 1 /* 515-pin 0.50 0.65 */
+#define OMAP_PACKAGE_CBP 6 /* 515-pin 0.40 0.50 */
+#define OMAP_PACKAGE_CUS 5 /* 423-pin 0.65 */
+#define OMAP_PACKAGE_CBB 4 /* 515-pin 0.40 0.50 */
+#define OMAP_PACKAGE_CBC 3 /* 515-pin 0.50 0.65 */
+#define OMAP_PACKAGE_ZAC 2 /* 24xx 447-pin POP */
+#define OMAP_PACKAGE_ZAF 1 /* 2420 447-pin SIP */
#define OMAP_MUX_NR_MODES 8 /* Available modes */
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 03/16] omap: mux: Allow compiling in new mux code on all mach-omap2 systems
2010-06-30 12:06 [PATCH 00/16] omap mux updates for 2.6.36 merge window Tony Lindgren
2010-06-30 12:06 ` [PATCH 01/16] omap: mux: Fix omap_mux_init_gpio for omap24xx Tony Lindgren
2010-06-30 12:06 ` [PATCH 02/16] omap: mux: Renumber package defines to make room for older 24xx packages Tony Lindgren
@ 2010-06-30 12:06 ` Tony Lindgren
2010-06-30 12:06 ` [PATCH 04/16] omap: mux: Remove unncessary parens from mux34xx.c Tony Lindgren
` (12 subsequent siblings)
15 siblings, 0 replies; 23+ messages in thread
From: Tony Lindgren @ 2010-06-30 12:06 UTC (permalink / raw)
To: linux-arm-kernel
Allow compiling in new mux code on all mach-omap2 systems
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/mux.c | 2 +-
arch/arm/mach-omap2/mux.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 76b5bf7..197e295 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -372,7 +372,7 @@ int __init omap2_mux_init(void)
/*----------------------------------------------------------------------------*/
-#ifdef CONFIG_ARCH_OMAP3
+#ifdef CONFIG_ARCH_OMAP2PLUS
static LIST_HEAD(muxmodes);
static DEFINE_MUTEX(muxmode_mutex);
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index 46315f2..937a8ca 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -104,7 +104,7 @@ struct omap_board_mux {
u16 value;
};
-#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_OMAP_MUX)
/**
* omap_mux_init_gpio - initialize a signal based on the GPIO number
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 04/16] omap: mux: Remove unncessary parens from mux34xx.c
2010-06-30 12:06 [PATCH 00/16] omap mux updates for 2.6.36 merge window Tony Lindgren
` (2 preceding siblings ...)
2010-06-30 12:06 ` [PATCH 03/16] omap: mux: Allow compiling in new mux code on all mach-omap2 systems Tony Lindgren
@ 2010-06-30 12:06 ` Tony Lindgren
2010-06-30 12:06 ` [PATCH 05/16] omap: mux: Add data for 2420 Tony Lindgren
` (11 subsequent siblings)
15 siblings, 0 replies; 23+ messages in thread
From: Tony Lindgren @ 2010-06-30 12:06 UTC (permalink / raw)
To: linux-arm-kernel
Remove unncessary parens from mux34xx.c
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/mux34xx.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c
index 2ff4dce..f64d7ee 100644
--- a/arch/arm/mach-omap2/mux34xx.c
+++ b/arch/arm/mach-omap2/mux34xx.c
@@ -2032,19 +2032,19 @@ int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags)
struct omap_ball *package_balls;
switch (flags & OMAP_PACKAGE_MASK) {
- case (OMAP_PACKAGE_CBC):
+ case OMAP_PACKAGE_CBC:
package_subset = omap3_cbc_subset;
package_balls = omap3_cbc_ball;
break;
- case (OMAP_PACKAGE_CBB):
+ case OMAP_PACKAGE_CBB:
package_subset = omap3_cbb_subset;
package_balls = omap3_cbb_ball;
break;
- case (OMAP_PACKAGE_CUS):
+ case OMAP_PACKAGE_CUS:
package_subset = omap3_cus_subset;
package_balls = omap3_cus_ball;
break;
- case (OMAP_PACKAGE_CBP):
+ case OMAP_PACKAGE_CBP:
package_subset = omap36xx_cbp_subset;
package_balls = omap36xx_cbp_ball;
break;
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 05/16] omap: mux: Add data for 2420
2010-06-30 12:06 [PATCH 00/16] omap mux updates for 2.6.36 merge window Tony Lindgren
` (3 preceding siblings ...)
2010-06-30 12:06 ` [PATCH 04/16] omap: mux: Remove unncessary parens from mux34xx.c Tony Lindgren
@ 2010-06-30 12:06 ` Tony Lindgren
2010-06-30 12:06 ` [PATCH 06/16] omap: mux: Add data for 2430 Tony Lindgren
` (10 subsequent siblings)
15 siblings, 0 replies; 23+ messages in thread
From: Tony Lindgren @ 2010-06-30 12:06 UTC (permalink / raw)
To: linux-arm-kernel
Add data for 2420. Big thanks to Paul Walmsley <paul@pwsan.com>
for generating usable mux data out of TRMs.
Cc: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/Kconfig | 6
arch/arm/mach-omap2/Makefile | 1
arch/arm/mach-omap2/mux.h | 8
arch/arm/mach-omap2/mux2420.c | 688 +++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-omap2/mux2420.h | 282 +++++++++++++++++
5 files changed, 985 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-omap2/mux2420.c
create mode 100644 arch/arm/mach-omap2/mux2420.h
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index b31b6f1..d3932d3 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -17,6 +17,12 @@ config ARCH_OMAP3430
depends on ARCH_OMAP3
select ARCH_OMAP_OTG
+config OMAP_PACKAGE_ZAF
+ bool
+
+config OMAP_PACKAGE_ZAC
+ bool
+
config OMAP_PACKAGE_CBC
bool
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 0416643..b7e5537 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -36,6 +36,7 @@ AFLAGS_sram243x.o :=-Wa,-march=armv6
AFLAGS_sram34xx.o :=-Wa,-march=armv7-a
# Pin multiplexing
+obj-$(CONFIG_ARCH_OMAP2420) += mux2420.o
obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o
# SMS/SDRC
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index 937a8ca..e14cd4d 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -7,6 +7,7 @@
* published by the Free Software Foundation.
*/
+#include "mux2420.h"
#include "mux34xx.h"
#define OMAP_MUX_TERMINATOR 0xffff
@@ -173,6 +174,13 @@ void omap_mux_write(u16 val, u16 mux_offset);
void omap_mux_write_array(struct omap_board_mux *board_mux);
/**
+ * omap2420_mux_init() - initialize mux system with board specific set
+ * @board_mux: Board specific mux table
+ * @flags: OMAP package type used for the board
+ */
+int omap2420_mux_init(struct omap_board_mux *board_mux, int flags);
+
+/**
* omap3_mux_init() - initialize mux system with board specific set
* @board_mux: Board specific mux table
* @flags: OMAP package type used for the board
diff --git a/arch/arm/mach-omap2/mux2420.c b/arch/arm/mach-omap2/mux2420.c
new file mode 100644
index 0000000..fdb04a7
--- /dev/null
+++ b/arch/arm/mach-omap2/mux2420.c
@@ -0,0 +1,688 @@
+/*
+ * Copyright (C) 2010 Nokia
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include "mux.h"
+
+#ifdef CONFIG_OMAP_MUX
+
+#define _OMAP2420_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \
+{ \
+ .reg_offset = (OMAP2420_CONTROL_PADCONF_##M0##_OFFSET), \
+ .gpio = (g), \
+ .muxnames = { m0, m1, m2, m3, m4, m5, m6, m7 }, \
+}
+
+#else
+
+#define _OMAP2420_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \
+{ \
+ .reg_offset = (OMAP2420_CONTROL_PADCONF_##M0##_OFFSET), \
+ .gpio = (g), \
+}
+
+#endif
+
+#define _OMAP2420_BALLENTRY(M0, bb, bt) \
+{ \
+ .reg_offset = (OMAP2420_CONTROL_PADCONF_##M0##_OFFSET), \
+ .balls = { bb, bt }, \
+}
+
+/*
+ * Superset of all mux modes for omap2420
+ */
+static struct omap_mux __initdata omap2420_muxmodes[] = {
+ _OMAP2420_MUXENTRY(CAM_D0, 54,
+ "cam_d0", "hw_dbg2", "sti_dout", "gpio_54",
+ NULL, NULL, "etk_d2", NULL),
+ _OMAP2420_MUXENTRY(CAM_D1, 53,
+ "cam_d1", "hw_dbg3", "sti_din", "gpio_53",
+ NULL, NULL, "etk_d3", NULL),
+ _OMAP2420_MUXENTRY(CAM_D2, 52,
+ "cam_d2", "hw_dbg4", "mcbsp1_clkx", "gpio_52",
+ NULL, NULL, "etk_d4", NULL),
+ _OMAP2420_MUXENTRY(CAM_D3, 51,
+ "cam_d3", "hw_dbg5", "mcbsp1_dr", "gpio_51",
+ NULL, NULL, "etk_d5", NULL),
+ _OMAP2420_MUXENTRY(CAM_D4, 50,
+ "cam_d4", "hw_dbg6", "mcbsp1_fsr", "gpio_50",
+ NULL, NULL, "etk_d6", NULL),
+ _OMAP2420_MUXENTRY(CAM_D5, 49,
+ "cam_d5", "hw_dbg7", "mcbsp1_clkr", "gpio_49",
+ NULL, NULL, "etk_d7", NULL),
+ _OMAP2420_MUXENTRY(CAM_D6, 0,
+ "cam_d6", "hw_dbg8", NULL, NULL,
+ NULL, NULL, "etk_d8", NULL),
+ _OMAP2420_MUXENTRY(CAM_D7, 0,
+ "cam_d7", "hw_dbg9", NULL, NULL,
+ NULL, NULL, "etk_d9", NULL),
+ _OMAP2420_MUXENTRY(CAM_D8, 54,
+ "cam_d8", "hw_dbg10", NULL, "gpio_54",
+ NULL, NULL, "etk_d10", NULL),
+ _OMAP2420_MUXENTRY(CAM_D9, 53,
+ "cam_d9", "hw_dbg11", NULL, "gpio_53",
+ NULL, NULL, "etk_d11", NULL),
+ _OMAP2420_MUXENTRY(CAM_HS, 55,
+ "cam_hs", "hw_dbg1", "mcbsp1_dx", "gpio_55",
+ NULL, NULL, "etk_d1", NULL),
+ _OMAP2420_MUXENTRY(CAM_LCLK, 57,
+ "cam_lclk", NULL, "mcbsp_clks", "gpio_57",
+ NULL, NULL, "etk_c1", NULL),
+ _OMAP2420_MUXENTRY(CAM_VS, 56,
+ "cam_vs", "hw_dbg0", "mcbsp1_fsx", "gpio_56",
+ NULL, NULL, "etk_d0", NULL),
+ _OMAP2420_MUXENTRY(CAM_XCLK, 0,
+ "cam_xclk", NULL, "sti_clk", NULL,
+ NULL, NULL, "etk_c2", NULL),
+ _OMAP2420_MUXENTRY(DSS_ACBIAS, 48,
+ "dss_acbias", NULL, "mcbsp2_fsx", "gpio_48",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(DSS_DATA10, 40,
+ "dss_data10", NULL, NULL, "gpio_40",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(DSS_DATA11, 41,
+ "dss_data11", NULL, NULL, "gpio_41",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(DSS_DATA12, 42,
+ "dss_data12", NULL, NULL, "gpio_42",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(DSS_DATA13, 43,
+ "dss_data13", NULL, NULL, "gpio_43",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(DSS_DATA14, 44,
+ "dss_data14", NULL, NULL, "gpio_44",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(DSS_DATA15, 45,
+ "dss_data15", NULL, NULL, "gpio_45",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(DSS_DATA16, 46,
+ "dss_data16", NULL, NULL, "gpio_46",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(DSS_DATA17, 47,
+ "dss_data17", NULL, NULL, "gpio_47",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(DSS_DATA8, 38,
+ "dss_data8", NULL, NULL, "gpio_38",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(DSS_DATA9, 39,
+ "dss_data9", NULL, NULL, "gpio_39",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(EAC_AC_DIN, 115,
+ "eac_ac_din", "mcbsp2_dr", NULL, "gpio_115",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(EAC_AC_DOUT, 116,
+ "eac_ac_dout", "mcbsp2_dx", NULL, "gpio_116",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(EAC_AC_FS, 114,
+ "eac_ac_fs", "mcbsp2_fsx", NULL, "gpio_114",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(EAC_AC_MCLK, 117,
+ "eac_ac_mclk", NULL, NULL, "gpio_117",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(EAC_AC_RST, 118,
+ "eac_ac_rst", "eac_bt_din", NULL, "gpio_118",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(EAC_AC_SCLK, 113,
+ "eac_ac_sclk", "mcbsp2_clkx", NULL, "gpio_113",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(EAC_BT_DIN, 73,
+ "eac_bt_din", NULL, NULL, "gpio_73",
+ NULL, NULL, "etk_d9", NULL),
+ _OMAP2420_MUXENTRY(EAC_BT_DOUT, 74,
+ "eac_bt_dout", NULL, "sti_clk", "gpio_74",
+ NULL, NULL, "etk_d8", NULL),
+ _OMAP2420_MUXENTRY(EAC_BT_FS, 72,
+ "eac_bt_fs", NULL, NULL, "gpio_72",
+ NULL, NULL, "etk_d10", NULL),
+ _OMAP2420_MUXENTRY(EAC_BT_SCLK, 71,
+ "eac_bt_sclk", NULL, NULL, "gpio_71",
+ NULL, NULL, "etk_d11", NULL),
+ _OMAP2420_MUXENTRY(GPIO_119, 119,
+ "gpio_119", NULL, "sti_din", "gpio_119",
+ NULL, "sys_boot0", "etk_d12", NULL),
+ _OMAP2420_MUXENTRY(GPIO_120, 120,
+ "gpio_120", NULL, "sti_dout", "gpio_120",
+ "cam_d9", "sys_boot1", "etk_d13", NULL),
+ _OMAP2420_MUXENTRY(GPIO_121, 121,
+ "gpio_121", NULL, NULL, "gpio_121",
+ "jtag_emu2", "sys_boot2", "etk_d14", NULL),
+ _OMAP2420_MUXENTRY(GPIO_122, 122,
+ "gpio_122", NULL, NULL, "gpio_122",
+ "jtag_emu3", "sys_boot3", "etk_d15", NULL),
+ _OMAP2420_MUXENTRY(GPIO_124, 124,
+ "gpio_124", NULL, NULL, "gpio_124",
+ NULL, "sys_boot5", NULL, NULL),
+ _OMAP2420_MUXENTRY(GPIO_125, 125,
+ "gpio_125", "sys_jtagsel1", "sys_jtagsel2", "gpio_125",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPIO_36, 36,
+ "gpio_36", NULL, NULL, "gpio_36",
+ NULL, "sys_boot4", NULL, NULL),
+ _OMAP2420_MUXENTRY(GPIO_62, 62,
+ "gpio_62", "uart1_rx", "usb1_dat", "gpio_62",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPIO_6, 6,
+ "gpio_6", "tv_detpulse", NULL, "gpio_6",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_A10, 3,
+ "gpmc_a10", NULL, "sys_ndmareq5", "gpio_3",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_A1, 12,
+ "gpmc_a1", "dss_data18", NULL, "gpio_12",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_A2, 11,
+ "gpmc_a2", "dss_data19", NULL, "gpio_11",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_A3, 10,
+ "gpmc_a3", "dss_data20", NULL, "gpio_10",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_A4, 9,
+ "gpmc_a4", "dss_data21", NULL, "gpio_9",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_A5, 8,
+ "gpmc_a5", "dss_data22", NULL, "gpio_8",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_A6, 7,
+ "gpmc_a6", "dss_data23", NULL, "gpio_7",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_A7, 6,
+ "gpmc_a7", NULL, "sys_ndmareq2", "gpio_6",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_A8, 5,
+ "gpmc_a8", NULL, "sys_ndmareq3", "gpio_5",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_A9, 4,
+ "gpmc_a9", NULL, "sys_ndmareq4", "gpio_4",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_CLK, 21,
+ "gpmc_clk", NULL, NULL, "gpio_21",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_D10, 18,
+ "gpmc_d10", "ssi2_rdy_rx", NULL, "gpio_18",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_D11, 17,
+ "gpmc_d11", "ssi2_flag_rx", NULL, "gpio_17",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_D12, 16,
+ "gpmc_d12", "ssi2_dat_rx", NULL, "gpio_16",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_D13, 15,
+ "gpmc_d13", "ssi2_rdy_tx", NULL, "gpio_15",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_D14, 14,
+ "gpmc_d14", "ssi2_flag_tx", NULL, "gpio_14",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_D15, 13,
+ "gpmc_d15", "ssi2_dat_tx", NULL, "gpio_13",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_D8, 20,
+ "gpmc_d8", NULL, NULL, "gpio_20",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_D9, 19,
+ "gpmc_d9", "ssi2_wake", NULL, "gpio_19",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_NBE0, 29,
+ "gpmc_nbe0", NULL, NULL, "gpio_29",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_NBE1, 30,
+ "gpmc_nbe1", NULL, NULL, "gpio_30",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_NCS1, 22,
+ "gpmc_ncs1", NULL, NULL, "gpio_22",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_NCS2, 23,
+ "gpmc_ncs2", NULL, NULL, "gpio_23",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_NCS3, 24,
+ "gpmc_ncs3", "gpmc_io_dir", NULL, "gpio_24",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_NCS4, 25,
+ "gpmc_ncs4", NULL, NULL, "gpio_25",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_NCS5, 26,
+ "gpmc_ncs5", NULL, NULL, "gpio_26",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_NCS6, 27,
+ "gpmc_ncs6", NULL, NULL, "gpio_27",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_NCS7, 28,
+ "gpmc_ncs7", "gpmc_io_dir", "gpio_28", NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_NWP, 31,
+ "gpmc_nwp", NULL, NULL, "gpio_31",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_WAIT1, 33,
+ "gpmc_wait1", NULL, NULL, "gpio_33",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_WAIT2, 34,
+ "gpmc_wait2", NULL, NULL, "gpio_34",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(GPMC_WAIT3, 35,
+ "gpmc_wait3", NULL, NULL, "gpio_35",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(HDQ_SIO, 101,
+ "hdq_sio", "usb2_tllse0", "sys_altclk", "gpio_101",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(I2C2_SCL, 99,
+ "i2c2_scl", NULL, "gpt9_pwm_evt", "gpio_99",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(I2C2_SDA, 100,
+ "i2c2_sda", NULL, "spi2_ncs1", "gpio_100",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(JTAG_EMU0, 127,
+ "jtag_emu0", NULL, NULL, "gpio_127",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(JTAG_EMU1, 126,
+ "jtag_emu1", NULL, NULL, "gpio_126",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(MCBSP1_CLKR, 92,
+ "mcbsp1_clkr", "ssi2_dat_tx", "vlynq_tx1", "gpio_92",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(MCBSP1_CLKX, 98,
+ "mcbsp1_clkx", "ssi2_wake", "vlynq_nla", "gpio_98",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(MCBSP1_DR, 95,
+ "mcbsp1_dr", "ssi2_dat_rx", "vlynq_rx1", "gpio_95",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(MCBSP1_DX, 94,
+ "mcbsp1_dx", "ssi2_rdy_tx", "vlynq_clk", "gpio_94",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(MCBSP1_FSR, 93,
+ "mcbsp1_fsr", "ssi2_flag_tx", "vlynq_tx0", "gpio_93",
+ "spi2_ncs1", NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(MCBSP1_FSX, 97,
+ "mcbsp1_fsx", "ssi2_rdy_rx", NULL, "gpio_97",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(MCBSP2_CLKX, 12,
+ "mcbsp2_clkx", NULL, "dss_data23", "gpio_12",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(MCBSP2_DR, 11,
+ "mcbsp2_dr", NULL, "dss_data22", "gpio_11",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(MCBSP_CLKS, 96,
+ "mcbsp_clks", "ssi2_flag_rx", "vlynq_rx0", "gpio_96",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(MMC_CLKI, 59,
+ "sdmmc_clki", "ms_clki", NULL, "gpio_59",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(MMC_CLKO, 0,
+ "sdmmc_clko", "ms_clko", NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(MMC_CMD_DIR, 8,
+ "sdmmc_cmd_dir", NULL, NULL, "gpio_8",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(MMC_CMD, 0,
+ "sdmmc_cmd", "ms_bs", NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(MMC_DAT_DIR0, 7,
+ "sdmmc_dat_dir0", "ms_dat0_dir", NULL, "gpio_7",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(MMC_DAT0, 0,
+ "sdmmc_dat0", "ms_dat0", NULL, NULL,
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(MMC_DAT_DIR1, 78,
+ "sdmmc_dat_dir1", "ms_datu_dir", "uart2_rts", "gpio_78",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(MMC_DAT1, 75,
+ "sdmmc_dat1", "ms_dat1", NULL, "gpio_75",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(MMC_DAT_DIR2, 79,
+ "sdmmc_dat_dir2", "ms_datu_dir", "uart2_tx", "gpio_79",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(MMC_DAT2, 76,
+ "sdmmc_dat2", "ms_dat2", "uart2_cts", "gpio_76",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(MMC_DAT_DIR3, 80,
+ "sdmmc_dat_dir3", "ms_datu_dir", "uart2_rx", "gpio_80",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(MMC_DAT3, 77,
+ "sdmmc_dat3", "ms_dat3", NULL, "gpio_77",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(SDRC_A12, 2,
+ "sdrc_a12", NULL, NULL, "gpio_2",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(SDRC_A13, 1,
+ "sdrc_a13", NULL, NULL, "gpio_1",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(SDRC_A14, 0,
+ "sdrc_a14", NULL, NULL, "gpio_0",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(SDRC_CKE1, 38,
+ "sdrc_cke1", NULL, NULL, "gpio_38",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(SDRC_NCS1, 37,
+ "sdrc_ncs1", NULL, NULL, "gpio_37",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(SPI1_CLK, 81,
+ "spi1_clk", NULL, NULL, "gpio_81",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(SPI1_NCS0, 84,
+ "spi1_ncs0", NULL, NULL, "gpio_84",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(SPI1_NCS1, 85,
+ "spi1_ncs1", NULL, NULL, "gpio_85",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(SPI1_NCS2, 86,
+ "spi1_ncs2", NULL, NULL, "gpio_86",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(SPI1_NCS3, 87,
+ "spi1_ncs3", NULL, NULL, "gpio_87",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(SPI1_SIMO, 82,
+ "spi1_simo", NULL, NULL, "gpio_82",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(SPI1_SOMI, 83,
+ "spi1_somi", NULL, NULL, "gpio_83",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(SPI2_CLK, 88,
+ "spi2_clk", NULL, NULL, "gpio_88",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(SPI2_NCS0, 91,
+ "spi2_ncs0", "gpt12_pwm_evt", NULL, "gpio_91",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(SPI2_SIMO, 89,
+ "spi2_simo", "gpt10_pwm_evt", NULL, "gpio_89",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(SPI2_SOMI, 90,
+ "spi2_somi", "gpt11_pwm_evt", NULL, "gpio_90",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(SSI1_DAT_RX, 63,
+ "ssi1_dat_rx", "eac_md_sclk", NULL, "gpio_63",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(SSI1_DAT_TX, 59,
+ "ssi1_dat_tx", "uart1_tx", "usb1_se0", "gpio_59",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(SSI1_FLAG_RX, 64,
+ "ssi1_flag_rx", "eac_md_din", NULL, "gpio_64",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(SSI1_FLAG_TX, 25,
+ "ssi1_flag_tx", "uart1_rts", "usb1_rcv", "gpio_25",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(SSI1_RDY_RX, 65,
+ "ssi1_rdy_rx", "eac_md_dout", NULL, "gpio_65",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(SSI1_RDY_TX, 61,
+ "ssi1_rdy_tx", "uart1_cts", "usb1_txen", "gpio_61",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(SSI1_WAKE, 66,
+ "ssi1_wake", "eac_md_fs", NULL, "gpio_66",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(SYS_CLKOUT, 123,
+ "sys_clkout", NULL, NULL, "gpio_123",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(SYS_CLKREQ, 52,
+ "sys_clkreq", NULL, NULL, "gpio_52",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(SYS_NIRQ, 60,
+ "sys_nirq", NULL, NULL, "gpio_60",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(UART1_CTS, 32,
+ "uart1_cts", NULL, "dss_data18", "gpio_32",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(UART1_RTS, 8,
+ "uart1_rts", NULL, "dss_data19", "gpio_8",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(UART1_RX, 10,
+ "uart1_rx", NULL, "dss_data21", "gpio_10",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(UART1_TX, 9,
+ "uart1_tx", NULL, "dss_data20", "gpio_9",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(UART2_CTS, 67,
+ "uart2_cts", "usb1_rcv", "gpt9_pwm_evt", "gpio_67",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(UART2_RTS, 68,
+ "uart2_rts", "usb1_txen", "gpt10_pwm_evt", "gpio_68",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(UART2_RX, 70,
+ "uart2_rx", "usb1_dat", "gpt12_pwm_evt", "gpio_70",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(UART2_TX, 69,
+ "uart2_tx", "usb1_se0", "gpt11_pwm_evt", "gpio_69",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(UART3_CTS_RCTX, 102,
+ "uart3_cts_rctx", "uart3_rx_irrx", NULL, "gpio_102",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(UART3_RTS_SD, 103,
+ "uart3_rts_sd", "uart3_tx_irtx", NULL, "gpio_103",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(UART3_RX_IRRX, 105,
+ "uart3_rx_irrx", NULL, NULL, "gpio_105",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(UART3_TX_IRTX, 104,
+ "uart3_tx_irtx", "uart3_cts_rctx", NULL, "gpio_104",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(USB0_DAT, 112,
+ "usb0_dat", "uart3_rx_irrx", "uart2_rx", "gpio_112",
+ "uart2_tx", NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(USB0_PUEN, 106,
+ "usb0_puen", "mcbsp2_dx", NULL, "gpio_106",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(USB0_RCV, 109,
+ "usb0_rcv", "mcbsp2_fsx", NULL, "gpio_109",
+ "uart2_cts", NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(USB0_SE0, 111,
+ "usb0_se0", "uart3_tx_irtx", "uart2_tx", "gpio_111",
+ "uart2_rx", NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(USB0_TXEN, 110,
+ "usb0_txen", "uart3_cts_rctx", "uart2_cts", "gpio_110",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(USB0_VM, 108,
+ "usb0_vm", "mcbsp2_clkx", NULL, "gpio_108",
+ "uart2_rx", NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(USB0_VP, 107,
+ "usb0_vp", "mcbsp2_dr", NULL, "gpio_107",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(VLYNQ_CLK, 13,
+ "vlynq_clk", "usb2_se0", "sys_ndmareq0", "gpio_13",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(VLYNQ_NLA, 58,
+ "vlynq_nla", NULL, NULL, "gpio_58",
+ "cam_d6", NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(VLYNQ_RX0, 15,
+ "vlynq_rx0", "usb2_tllse0", NULL, "gpio_15",
+ "cam_d7", NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(VLYNQ_RX1, 14,
+ "vlynq_rx1", "usb2_rcv", "sys_ndmareq1", "gpio_14",
+ "cam_d8", NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(VLYNQ_TX0, 17,
+ "vlynq_tx0", "usb2_txen", NULL, "gpio_17",
+ NULL, NULL, NULL, NULL),
+ _OMAP2420_MUXENTRY(VLYNQ_TX1, 16,
+ "vlynq_tx1", "usb2_dat", "sys_clkout2", "gpio_16",
+ NULL, NULL, NULL, NULL),
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+/*
+ * Balls for 447-pin POP package
+ */
+#ifdef CONFIG_DEBUG_FS
+struct omap_ball __initdata omap2420_pop_ball[] = {
+ _OMAP2420_BALLENTRY(CAM_D0, "y4", NULL),
+ _OMAP2420_BALLENTRY(CAM_D1, "y3", NULL),
+ _OMAP2420_BALLENTRY(CAM_D2, "u7", NULL),
+ _OMAP2420_BALLENTRY(CAM_D3, "ab3", NULL),
+ _OMAP2420_BALLENTRY(CAM_D4, "v2", NULL),
+ _OMAP2420_BALLENTRY(CAM_D5, "ad3", NULL),
+ _OMAP2420_BALLENTRY(CAM_D6, "aa4", NULL),
+ _OMAP2420_BALLENTRY(CAM_D7, "ab4", NULL),
+ _OMAP2420_BALLENTRY(CAM_D8, "ac6", NULL),
+ _OMAP2420_BALLENTRY(CAM_D9, "ac7", NULL),
+ _OMAP2420_BALLENTRY(CAM_HS, "v4", NULL),
+ _OMAP2420_BALLENTRY(CAM_LCLK, "ad6", NULL),
+ _OMAP2420_BALLENTRY(CAM_VS, "p7", NULL),
+ _OMAP2420_BALLENTRY(CAM_XCLK, "w4", NULL),
+ _OMAP2420_BALLENTRY(DSS_ACBIAS, "ae8", NULL),
+ _OMAP2420_BALLENTRY(DSS_DATA10, "ac12", NULL),
+ _OMAP2420_BALLENTRY(DSS_DATA11, "ae11", NULL),
+ _OMAP2420_BALLENTRY(DSS_DATA12, "ae13", NULL),
+ _OMAP2420_BALLENTRY(DSS_DATA13, "ad13", NULL),
+ _OMAP2420_BALLENTRY(DSS_DATA14, "ac13", NULL),
+ _OMAP2420_BALLENTRY(DSS_DATA15, "y12", NULL),
+ _OMAP2420_BALLENTRY(DSS_DATA16, "ad14", NULL),
+ _OMAP2420_BALLENTRY(DSS_DATA17, "y13", NULL),
+ _OMAP2420_BALLENTRY(DSS_DATA8, "ad11", NULL),
+ _OMAP2420_BALLENTRY(DSS_DATA9, "ad12", NULL),
+ _OMAP2420_BALLENTRY(EAC_AC_DIN, "ad19", NULL),
+ _OMAP2420_BALLENTRY(EAC_AC_DOUT, "af22", NULL),
+ _OMAP2420_BALLENTRY(EAC_AC_FS, "ad16", NULL),
+ _OMAP2420_BALLENTRY(EAC_AC_MCLK, "y17", NULL),
+ _OMAP2420_BALLENTRY(EAC_AC_RST, "ae22", NULL),
+ _OMAP2420_BALLENTRY(EAC_AC_SCLK, "ac18", NULL),
+ _OMAP2420_BALLENTRY(EAC_BT_DIN, "u8", NULL),
+ _OMAP2420_BALLENTRY(EAC_BT_DOUT, "ad5", NULL),
+ _OMAP2420_BALLENTRY(EAC_BT_FS, "w7", NULL),
+ _OMAP2420_BALLENTRY(EAC_BT_SCLK, "ad4", NULL),
+ _OMAP2420_BALLENTRY(GPIO_119, "af6", NULL),
+ _OMAP2420_BALLENTRY(GPIO_120, "af4", NULL),
+ _OMAP2420_BALLENTRY(GPIO_121, "ae6", NULL),
+ _OMAP2420_BALLENTRY(GPIO_122, "w3", NULL),
+ _OMAP2420_BALLENTRY(GPIO_124, "y19", NULL),
+ _OMAP2420_BALLENTRY(GPIO_125, "ae24", NULL),
+ _OMAP2420_BALLENTRY(GPIO_36, "y18", NULL),
+ _OMAP2420_BALLENTRY(GPIO_6, "d6", NULL),
+ _OMAP2420_BALLENTRY(GPIO_62, "ad18", NULL),
+ _OMAP2420_BALLENTRY(GPMC_A1, "m8", NULL),
+ _OMAP2420_BALLENTRY(GPMC_A10, "d5", NULL),
+ _OMAP2420_BALLENTRY(GPMC_A2, "w9", NULL),
+ _OMAP2420_BALLENTRY(GPMC_A3, "af10", NULL),
+ _OMAP2420_BALLENTRY(GPMC_A4, "w8", NULL),
+ _OMAP2420_BALLENTRY(GPMC_A5, "ae16", NULL),
+ _OMAP2420_BALLENTRY(GPMC_A6, "af9", NULL),
+ _OMAP2420_BALLENTRY(GPMC_A7, "e4", NULL),
+ _OMAP2420_BALLENTRY(GPMC_A8, "j7", NULL),
+ _OMAP2420_BALLENTRY(GPMC_A9, "ae18", NULL),
+ _OMAP2420_BALLENTRY(GPMC_CLK, "p1", "l1"),
+ _OMAP2420_BALLENTRY(GPMC_D10, "t1", "n1"),
+ _OMAP2420_BALLENTRY(GPMC_D11, "u2", "p2"),
+ _OMAP2420_BALLENTRY(GPMC_D12, "u1", "p1"),
+ _OMAP2420_BALLENTRY(GPMC_D13, "p2", "m1"),
+ _OMAP2420_BALLENTRY(GPMC_D14, "h2", "j2"),
+ _OMAP2420_BALLENTRY(GPMC_D15, "h1", "k2"),
+ _OMAP2420_BALLENTRY(GPMC_D8, "v1", "r1"),
+ _OMAP2420_BALLENTRY(GPMC_D9, "y1", "t1"),
+ _OMAP2420_BALLENTRY(GPMC_NBE0, "af12", "aa10"),
+ _OMAP2420_BALLENTRY(GPMC_NBE1, "u3", NULL),
+ _OMAP2420_BALLENTRY(GPMC_NCS1, "af14", "w1"),
+ _OMAP2420_BALLENTRY(GPMC_NCS2, "g4", NULL),
+ _OMAP2420_BALLENTRY(GPMC_NCS3, "t8", NULL),
+ _OMAP2420_BALLENTRY(GPMC_NCS4, "h8", NULL),
+ _OMAP2420_BALLENTRY(GPMC_NCS5, "k3", NULL),
+ _OMAP2420_BALLENTRY(GPMC_NCS6, "m7", NULL),
+ _OMAP2420_BALLENTRY(GPMC_NCS7, "p3", NULL),
+ _OMAP2420_BALLENTRY(GPMC_NWP, "ae15", "y5"),
+ _OMAP2420_BALLENTRY(GPMC_WAIT1, "ae20", "y8"),
+ _OMAP2420_BALLENTRY(GPMC_WAIT2, "n2", NULL),
+ _OMAP2420_BALLENTRY(GPMC_WAIT3, "t4", NULL),
+ _OMAP2420_BALLENTRY(HDQ_SIO, "t23", NULL),
+ _OMAP2420_BALLENTRY(I2C2_SCL, "l2", NULL),
+ _OMAP2420_BALLENTRY(I2C2_SDA, "k19", NULL),
+ _OMAP2420_BALLENTRY(JTAG_EMU0, "n24", NULL),
+ _OMAP2420_BALLENTRY(JTAG_EMU1, "ac22", NULL),
+ _OMAP2420_BALLENTRY(MCBSP1_CLKR, "y24", NULL),
+ _OMAP2420_BALLENTRY(MCBSP1_CLKX, "t19", NULL),
+ _OMAP2420_BALLENTRY(MCBSP1_DR, "u23", NULL),
+ _OMAP2420_BALLENTRY(MCBSP1_DX, "r24", NULL),
+ _OMAP2420_BALLENTRY(MCBSP1_FSR, "r20", NULL),
+ _OMAP2420_BALLENTRY(MCBSP1_FSX, "r23", NULL),
+ _OMAP2420_BALLENTRY(MCBSP2_CLKX, "t24", NULL),
+ _OMAP2420_BALLENTRY(MCBSP2_DR, "p20", NULL),
+ _OMAP2420_BALLENTRY(MCBSP_CLKS, "p23", NULL),
+ _OMAP2420_BALLENTRY(MMC_CLKI, "c23", NULL),
+ _OMAP2420_BALLENTRY(MMC_CLKO, "h23", NULL),
+ _OMAP2420_BALLENTRY(MMC_CMD, "j23", NULL),
+ _OMAP2420_BALLENTRY(MMC_CMD_DIR, "j24", NULL),
+ _OMAP2420_BALLENTRY(MMC_DAT0, "h17", NULL),
+ _OMAP2420_BALLENTRY(MMC_DAT_DIR0, "f23", NULL),
+ _OMAP2420_BALLENTRY(MMC_DAT1, "g19", NULL),
+ _OMAP2420_BALLENTRY(MMC_DAT_DIR1, "d23", NULL),
+ _OMAP2420_BALLENTRY(MMC_DAT2, "h20", NULL),
+ _OMAP2420_BALLENTRY(MMC_DAT_DIR2, "g23", NULL),
+ _OMAP2420_BALLENTRY(MMC_DAT3, "d24", NULL),
+ _OMAP2420_BALLENTRY(MMC_DAT_DIR3, "e23", NULL),
+ _OMAP2420_BALLENTRY(SDRC_A12, "w26", "r21"),
+ _OMAP2420_BALLENTRY(SDRC_A13, "w25", "aa15"),
+ _OMAP2420_BALLENTRY(SDRC_A14, "aa26", "y12"),
+ _OMAP2420_BALLENTRY(SDRC_CKE1, "ae25", "y13"),
+ _OMAP2420_BALLENTRY(SDRC_NCS1, "y25", "t20"),
+ _OMAP2420_BALLENTRY(SPI1_CLK, "y23", NULL),
+ _OMAP2420_BALLENTRY(SPI1_NCS0, "w24", NULL),
+ _OMAP2420_BALLENTRY(SPI1_NCS1, "w23", NULL),
+ _OMAP2420_BALLENTRY(SPI1_NCS2, "v23", NULL),
+ _OMAP2420_BALLENTRY(SPI1_NCS3, "u20", NULL),
+ _OMAP2420_BALLENTRY(SPI1_SIMO, "h10", NULL),
+ _OMAP2420_BALLENTRY(SPI1_SOMI, "v19", NULL),
+ _OMAP2420_BALLENTRY(SPI2_CLK, "v24", NULL),
+ _OMAP2420_BALLENTRY(SPI2_NCS0, "aa24", NULL),
+ _OMAP2420_BALLENTRY(SPI2_SIMO, "u24", NULL),
+ _OMAP2420_BALLENTRY(SPI2_SOMI, "v25", NULL),
+ _OMAP2420_BALLENTRY(SSI1_DAT_RX, "w15", NULL),
+ _OMAP2420_BALLENTRY(SSI1_DAT_TX, "w13", NULL),
+ _OMAP2420_BALLENTRY(SSI1_FLAG_RX, "af11", NULL),
+ _OMAP2420_BALLENTRY(SSI1_FLAG_TX, "ac15", NULL),
+ _OMAP2420_BALLENTRY(SSI1_RDY_RX, "ac16", NULL),
+ _OMAP2420_BALLENTRY(SSI1_RDY_TX, "af15", NULL),
+ _OMAP2420_BALLENTRY(SSI1_WAKE, "ad15", NULL),
+ _OMAP2420_BALLENTRY(SYS_CLKOUT, "ae19", NULL),
+ _OMAP2420_BALLENTRY(SYS_CLKREQ, "ad20", NULL),
+ _OMAP2420_BALLENTRY(SYS_NIRQ, "y20", NULL),
+ _OMAP2420_BALLENTRY(UART1_CTS, "g20", NULL),
+ _OMAP2420_BALLENTRY(UART1_RTS, "k20", NULL),
+ _OMAP2420_BALLENTRY(UART1_RX, "t20", NULL),
+ _OMAP2420_BALLENTRY(UART1_TX, "h12", NULL),
+ _OMAP2420_BALLENTRY(UART2_CTS, "ac24", NULL),
+ _OMAP2420_BALLENTRY(UART2_RTS, "w20", NULL),
+ _OMAP2420_BALLENTRY(UART2_RX, "ad24", NULL),
+ _OMAP2420_BALLENTRY(UART2_TX, "ab24", NULL),
+ _OMAP2420_BALLENTRY(UART3_CTS_RCTX, "k24", NULL),
+ _OMAP2420_BALLENTRY(UART3_RTS_SD, "m20", NULL),
+ _OMAP2420_BALLENTRY(UART3_RX_IRRX, "h24", NULL),
+ _OMAP2420_BALLENTRY(UART3_TX_IRTX, "g24", NULL),
+ _OMAP2420_BALLENTRY(USB0_DAT, "j25", NULL),
+ _OMAP2420_BALLENTRY(USB0_PUEN, "l23", NULL),
+ _OMAP2420_BALLENTRY(USB0_RCV, "k23", NULL),
+ _OMAP2420_BALLENTRY(USB0_SE0, "l24", NULL),
+ _OMAP2420_BALLENTRY(USB0_TXEN, "m24", NULL),
+ _OMAP2420_BALLENTRY(USB0_VM, "n23", NULL),
+ _OMAP2420_BALLENTRY(USB0_VP, "m23", NULL),
+ _OMAP2420_BALLENTRY(VLYNQ_CLK, "w12", NULL),
+ _OMAP2420_BALLENTRY(VLYNQ_NLA, "ae10", NULL),
+ _OMAP2420_BALLENTRY(VLYNQ_RX0, "ad7", NULL),
+ _OMAP2420_BALLENTRY(VLYNQ_RX1, "w10", NULL),
+ _OMAP2420_BALLENTRY(VLYNQ_TX0, "y15", NULL),
+ _OMAP2420_BALLENTRY(VLYNQ_TX1, "w14", NULL),
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap2420_pop_ball NULL
+#endif
+
+int __init omap2420_mux_init(struct omap_board_mux *board_subset, int flags)
+{
+ struct omap_ball *package_balls = NULL;
+
+ switch (flags & OMAP_PACKAGE_MASK) {
+ case OMAP_PACKAGE_ZAC:
+ package_balls = omap2420_pop_ball;
+ break;
+ case OMAP_PACKAGE_ZAF:
+ /* REVISIT: Please add data */
+ default:
+ pr_warning("mux: No ball data available for omap2420 package\n");
+ }
+
+ return omap_mux_init(OMAP2420_CONTROL_PADCONF_MUX_PBASE,
+ OMAP2420_CONTROL_PADCONF_MUX_SIZE,
+ omap2420_muxmodes, NULL, board_subset,
+ package_balls);
+}
diff --git a/arch/arm/mach-omap2/mux2420.h b/arch/arm/mach-omap2/mux2420.h
new file mode 100644
index 0000000..0f555aa
--- /dev/null
+++ b/arch/arm/mach-omap2/mux2420.h
@@ -0,0 +1,282 @@
+/*
+ * Copyright (C) 2009 Nokia
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define OMAP2420_CONTROL_PADCONF_MUX_PBASE 0x48000030LU
+
+#define OMAP2420_MUX(mode0, mux_value) \
+{ \
+ .reg_offset = (OMAP2420_CONTROL_PADCONF_##mode0##_OFFSET), \
+ .value = (mux_value), \
+}
+
+/*
+ * OMAP2420 CONTROL_PADCONF* register offsets for pin-muxing
+ *
+ * Extracted from the TRM. Add 0x48000030 to these values to get the
+ * absolute addresses. The name in the macro is the mode-0 name of
+ * the pin. NOTE: These registers are 8-bits wide.
+ */
+#define OMAP2420_CONTROL_PADCONF_SDRC_A14_OFFSET 0x000
+#define OMAP2420_CONTROL_PADCONF_SDRC_A13_OFFSET 0x001
+#define OMAP2420_CONTROL_PADCONF_SDRC_A12_OFFSET 0x002
+#define OMAP2420_CONTROL_PADCONF_SDRC_BA1_OFFSET 0x003
+#define OMAP2420_CONTROL_PADCONF_SDRC_BA0_OFFSET 0x004
+#define OMAP2420_CONTROL_PADCONF_SDRC_A11_OFFSET 0x005
+#define OMAP2420_CONTROL_PADCONF_SDRC_A10_OFFSET 0x006
+#define OMAP2420_CONTROL_PADCONF_SDRC_A9_OFFSET 0x007
+#define OMAP2420_CONTROL_PADCONF_SDRC_A8_OFFSET 0x008
+#define OMAP2420_CONTROL_PADCONF_SDRC_A7_OFFSET 0x009
+#define OMAP2420_CONTROL_PADCONF_SDRC_A6_OFFSET 0x00a
+#define OMAP2420_CONTROL_PADCONF_SDRC_A5_OFFSET 0x00b
+#define OMAP2420_CONTROL_PADCONF_SDRC_A4_OFFSET 0x00c
+#define OMAP2420_CONTROL_PADCONF_SDRC_A3_OFFSET 0x00d
+#define OMAP2420_CONTROL_PADCONF_SDRC_A2_OFFSET 0x00e
+#define OMAP2420_CONTROL_PADCONF_SDRC_A1_OFFSET 0x00f
+#define OMAP2420_CONTROL_PADCONF_SDRC_A0_OFFSET 0x010
+#define OMAP2420_CONTROL_PADCONF_SDRC_D31_OFFSET 0x021
+#define OMAP2420_CONTROL_PADCONF_SDRC_D30_OFFSET 0x022
+#define OMAP2420_CONTROL_PADCONF_SDRC_D29_OFFSET 0x023
+#define OMAP2420_CONTROL_PADCONF_SDRC_D28_OFFSET 0x024
+#define OMAP2420_CONTROL_PADCONF_SDRC_D27_OFFSET 0x025
+#define OMAP2420_CONTROL_PADCONF_SDRC_D26_OFFSET 0x026
+#define OMAP2420_CONTROL_PADCONF_SDRC_D25_OFFSET 0x027
+#define OMAP2420_CONTROL_PADCONF_SDRC_D24_OFFSET 0x028
+#define OMAP2420_CONTROL_PADCONF_SDRC_D23_OFFSET 0x029
+#define OMAP2420_CONTROL_PADCONF_SDRC_D22_OFFSET 0x02a
+#define OMAP2420_CONTROL_PADCONF_SDRC_D21_OFFSET 0x02b
+#define OMAP2420_CONTROL_PADCONF_SDRC_D20_OFFSET 0x02c
+#define OMAP2420_CONTROL_PADCONF_SDRC_D19_OFFSET 0x02d
+#define OMAP2420_CONTROL_PADCONF_SDRC_D18_OFFSET 0x02e
+#define OMAP2420_CONTROL_PADCONF_SDRC_D17_OFFSET 0x02f
+#define OMAP2420_CONTROL_PADCONF_SDRC_D16_OFFSET 0x030
+#define OMAP2420_CONTROL_PADCONF_SDRC_D15_OFFSET 0x031
+#define OMAP2420_CONTROL_PADCONF_SDRC_D14_OFFSET 0x032
+#define OMAP2420_CONTROL_PADCONF_SDRC_D13_OFFSET 0x033
+#define OMAP2420_CONTROL_PADCONF_SDRC_D12_OFFSET 0x034
+#define OMAP2420_CONTROL_PADCONF_SDRC_D11_OFFSET 0x035
+#define OMAP2420_CONTROL_PADCONF_SDRC_D10_OFFSET 0x036
+#define OMAP2420_CONTROL_PADCONF_SDRC_D9_OFFSET 0x037
+#define OMAP2420_CONTROL_PADCONF_SDRC_D8_OFFSET 0x038
+#define OMAP2420_CONTROL_PADCONF_SDRC_D7_OFFSET 0x039
+#define OMAP2420_CONTROL_PADCONF_SDRC_D6_OFFSET 0x03a
+#define OMAP2420_CONTROL_PADCONF_SDRC_D5_OFFSET 0x03b
+#define OMAP2420_CONTROL_PADCONF_SDRC_D4_OFFSET 0x03c
+#define OMAP2420_CONTROL_PADCONF_SDRC_D3_OFFSET 0x03d
+#define OMAP2420_CONTROL_PADCONF_SDRC_D2_OFFSET 0x03e
+#define OMAP2420_CONTROL_PADCONF_SDRC_D1_OFFSET 0x03f
+#define OMAP2420_CONTROL_PADCONF_SDRC_D0_OFFSET 0x040
+#define OMAP2420_CONTROL_PADCONF_GPMC_A10_OFFSET 0x041
+#define OMAP2420_CONTROL_PADCONF_GPMC_A9_OFFSET 0x042
+#define OMAP2420_CONTROL_PADCONF_GPMC_A8_OFFSET 0x043
+#define OMAP2420_CONTROL_PADCONF_GPMC_A7_OFFSET 0x044
+#define OMAP2420_CONTROL_PADCONF_GPMC_A6_OFFSET 0x045
+#define OMAP2420_CONTROL_PADCONF_GPMC_A5_OFFSET 0x046
+#define OMAP2420_CONTROL_PADCONF_GPMC_A4_OFFSET 0x047
+#define OMAP2420_CONTROL_PADCONF_GPMC_A3_OFFSET 0x048
+#define OMAP2420_CONTROL_PADCONF_GPMC_A2_OFFSET 0x049
+#define OMAP2420_CONTROL_PADCONF_GPMC_A1_OFFSET 0x04a
+#define OMAP2420_CONTROL_PADCONF_GPMC_D15_OFFSET 0x04b
+#define OMAP2420_CONTROL_PADCONF_GPMC_D14_OFFSET 0x04c
+#define OMAP2420_CONTROL_PADCONF_GPMC_D13_OFFSET 0x04d
+#define OMAP2420_CONTROL_PADCONF_GPMC_D12_OFFSET 0x04e
+#define OMAP2420_CONTROL_PADCONF_GPMC_D11_OFFSET 0x04f
+#define OMAP2420_CONTROL_PADCONF_GPMC_D10_OFFSET 0x050
+#define OMAP2420_CONTROL_PADCONF_GPMC_D9_OFFSET 0x051
+#define OMAP2420_CONTROL_PADCONF_GPMC_D8_OFFSET 0x052
+#define OMAP2420_CONTROL_PADCONF_GPMC_D7_OFFSET 0x053
+#define OMAP2420_CONTROL_PADCONF_GPMC_D6_OFFSET 0x054
+#define OMAP2420_CONTROL_PADCONF_GPMC_D5_OFFSET 0x055
+#define OMAP2420_CONTROL_PADCONF_GPMC_D4_OFFSET 0x056
+#define OMAP2420_CONTROL_PADCONF_GPMC_D3_OFFSET 0x057
+#define OMAP2420_CONTROL_PADCONF_GPMC_D2_OFFSET 0x058
+#define OMAP2420_CONTROL_PADCONF_GPMC_D1_OFFSET 0x059
+#define OMAP2420_CONTROL_PADCONF_GPMC_D0_OFFSET 0x05a
+#define OMAP2420_CONTROL_PADCONF_GPMC_CLK_OFFSET 0x05b
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS0_OFFSET 0x05c
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS1_OFFSET 0x05d
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS2_OFFSET 0x05e
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS3_OFFSET 0x05f
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS4_OFFSET 0x060
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS5_OFFSET 0x061
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS6_OFFSET 0x062
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS7_OFFSET 0x063
+#define OMAP2420_CONTROL_PADCONF_GPMC_NALE_ALE_OFFSET 0x064
+#define OMAP2420_CONTROL_PADCONF_GPMC_NOE_OFFSET 0x065
+#define OMAP2420_CONTROL_PADCONF_GPMC_NWE_OFFSET 0x066
+#define OMAP2420_CONTROL_PADCONF_GPMC_NBE0_OFFSET 0x067
+#define OMAP2420_CONTROL_PADCONF_GPMC_NBE1_OFFSET 0x068
+#define OMAP2420_CONTROL_PADCONF_GPMC_NWP_OFFSET 0x069
+#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT0_OFFSET 0x06a
+#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT1_OFFSET 0x06b
+#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT2_OFFSET 0x06c
+#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT3_OFFSET 0x06d
+#define OMAP2420_CONTROL_PADCONF_SDRC_CLK_OFFSET 0x06e
+#define OMAP2420_CONTROL_PADCONF_SDRC_NCLK_OFFSET 0x06f
+#define OMAP2420_CONTROL_PADCONF_SDRC_NCS0_OFFSET 0x070
+#define OMAP2420_CONTROL_PADCONF_SDRC_NCS1_OFFSET 0x071
+#define OMAP2420_CONTROL_PADCONF_SDRC_CKE0_OFFSET 0x072
+#define OMAP2420_CONTROL_PADCONF_SDRC_CKE1_OFFSET 0x073
+#define OMAP2420_CONTROL_PADCONF_SDRC_NRAS_OFFSET 0x074
+#define OMAP2420_CONTROL_PADCONF_SDRC_NCAS_OFFSET 0x075
+#define OMAP2420_CONTROL_PADCONF_SDRC_NWE_OFFSET 0x076
+#define OMAP2420_CONTROL_PADCONF_SDRC_DM0_OFFSET 0x077
+#define OMAP2420_CONTROL_PADCONF_SDRC_DM1_OFFSET 0x078
+#define OMAP2420_CONTROL_PADCONF_SDRC_DM2_OFFSET 0x079
+#define OMAP2420_CONTROL_PADCONF_SDRC_DM3_OFFSET 0x07a
+#define OMAP2420_CONTROL_PADCONF_SDRC_DQS0_OFFSET 0x07f
+#define OMAP2420_CONTROL_PADCONF_SDRC_DQS1_OFFSET 0x080
+#define OMAP2420_CONTROL_PADCONF_SDRC_DQS2_OFFSET 0x081
+#define OMAP2420_CONTROL_PADCONF_SDRC_DQS3_OFFSET 0x082
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA0_OFFSET 0x083
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA1_OFFSET 0x084
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA2_OFFSET 0x085
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA3_OFFSET 0x086
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA4_OFFSET 0x087
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA5_OFFSET 0x088
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA6_OFFSET 0x089
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA7_OFFSET 0x08a
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA8_OFFSET 0x08b
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA9_OFFSET 0x08c
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA10_OFFSET 0x08d
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA11_OFFSET 0x08e
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA12_OFFSET 0x08f
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA13_OFFSET 0x090
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA14_OFFSET 0x091
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA15_OFFSET 0x092
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA16_OFFSET 0x093
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA17_OFFSET 0x094
+#define OMAP2420_CONTROL_PADCONF_UART1_CTS_OFFSET 0x095
+#define OMAP2420_CONTROL_PADCONF_UART1_RTS_OFFSET 0x096
+#define OMAP2420_CONTROL_PADCONF_UART1_TX_OFFSET 0x097
+#define OMAP2420_CONTROL_PADCONF_UART1_RX_OFFSET 0x098
+#define OMAP2420_CONTROL_PADCONF_MCBSP2_DR_OFFSET 0x099
+#define OMAP2420_CONTROL_PADCONF_MCBSP2_CLKX_OFFSET 0x09a
+#define OMAP2420_CONTROL_PADCONF_DSS_PCL_OFFSET 0x09b
+#define OMAP2420_CONTROL_PADCONF_DSS_VSYNC_OFFSET 0x09c
+#define OMAP2420_CONTROL_PADCONF_DSS_HSYNC_OFFSET 0x09d
+#define OMAP2420_CONTROL_PADCONF_DSS_ACBIAS_OFFSET 0x09e
+#define OMAP2420_CONTROL_PADCONF_CAM_D9_OFFSET 0x09f
+#define OMAP2420_CONTROL_PADCONF_CAM_D8_OFFSET 0x0a0
+#define OMAP2420_CONTROL_PADCONF_CAM_D7_OFFSET 0x0a1
+#define OMAP2420_CONTROL_PADCONF_CAM_D6_OFFSET 0x0a2
+#define OMAP2420_CONTROL_PADCONF_CAM_D5_OFFSET 0x0a3
+#define OMAP2420_CONTROL_PADCONF_CAM_D4_OFFSET 0x0a4
+#define OMAP2420_CONTROL_PADCONF_CAM_D3_OFFSET 0x0a5
+#define OMAP2420_CONTROL_PADCONF_CAM_D2_OFFSET 0x0a6
+#define OMAP2420_CONTROL_PADCONF_CAM_D1_OFFSET 0x0a7
+#define OMAP2420_CONTROL_PADCONF_CAM_D0_OFFSET 0x0a8
+#define OMAP2420_CONTROL_PADCONF_CAM_HS_OFFSET 0x0a9
+#define OMAP2420_CONTROL_PADCONF_CAM_VS_OFFSET 0x0aa
+#define OMAP2420_CONTROL_PADCONF_CAM_LCLK_OFFSET 0x0ab
+#define OMAP2420_CONTROL_PADCONF_CAM_XCLK_OFFSET 0x0ac
+#define OMAP2420_CONTROL_PADCONF_SSI1_DAT_TX_OFFSET 0x0ad
+#define OMAP2420_CONTROL_PADCONF_SSI1_FLAG_TX_OFFSET 0x0ae
+#define OMAP2420_CONTROL_PADCONF_SSI1_RDY_TX_OFFSET 0x0af
+#define OMAP2420_CONTROL_PADCONF_GPIO_62_OFFSET 0x0b0
+#define OMAP2420_CONTROL_PADCONF_SSI1_DAT_RX_OFFSET 0x0b1
+#define OMAP2420_CONTROL_PADCONF_SSI1_FLAG_RX_OFFSET 0x0b2
+#define OMAP2420_CONTROL_PADCONF_SSI1_RDY_RX_OFFSET 0x0b3
+#define OMAP2420_CONTROL_PADCONF_SSI1_WAKE_OFFSET 0x0b4
+#define OMAP2420_CONTROL_PADCONF_VLYNQ_CLK_OFFSET 0x0b5
+#define OMAP2420_CONTROL_PADCONF_VLYNQ_RX1_OFFSET 0x0b6
+#define OMAP2420_CONTROL_PADCONF_VLYNQ_RX0_OFFSET 0x0b7
+#define OMAP2420_CONTROL_PADCONF_VLYNQ_TX1_OFFSET 0x0b8
+#define OMAP2420_CONTROL_PADCONF_VLYNQ_TX0_OFFSET 0x0b9
+#define OMAP2420_CONTROL_PADCONF_VLYNQ_NLA_OFFSET 0x0ba
+#define OMAP2420_CONTROL_PADCONF_UART2_CTS_OFFSET 0x0bb
+#define OMAP2420_CONTROL_PADCONF_UART2_RTS_OFFSET 0x0bc
+#define OMAP2420_CONTROL_PADCONF_UART2_TX_OFFSET 0x0bd
+#define OMAP2420_CONTROL_PADCONF_UART2_RX_OFFSET 0x0be
+#define OMAP2420_CONTROL_PADCONF_EAC_BT_SCLK_OFFSET 0x0bf
+#define OMAP2420_CONTROL_PADCONF_EAC_BT_FS_OFFSET 0x0c0
+#define OMAP2420_CONTROL_PADCONF_EAC_BT_DIN_OFFSET 0x0c1
+#define OMAP2420_CONTROL_PADCONF_EAC_BT_DOUT_OFFSET 0x0c2
+#define OMAP2420_CONTROL_PADCONF_MMC_CLKO_OFFSET 0x0c3
+#define OMAP2420_CONTROL_PADCONF_MMC_CMD_OFFSET 0x0c4
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT0_OFFSET 0x0c5
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT1_OFFSET 0x0c6
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT2_OFFSET 0x0c7
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT3_OFFSET 0x0c8
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR0_OFFSET 0x0c9
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR1_OFFSET 0x0ca
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR2_OFFSET 0x0cb
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR3_OFFSET 0x0cc
+#define OMAP2420_CONTROL_PADCONF_MMC_CMD_DIR_OFFSET 0x0cd
+#define OMAP2420_CONTROL_PADCONF_MMC_CLKI_OFFSET 0x0ce
+#define OMAP2420_CONTROL_PADCONF_SPI1_CLK_OFFSET 0x0cf
+#define OMAP2420_CONTROL_PADCONF_SPI1_SIMO_OFFSET 0x0d0
+#define OMAP2420_CONTROL_PADCONF_SPI1_SOMI_OFFSET 0x0d1
+#define OMAP2420_CONTROL_PADCONF_SPI1_NCS0_OFFSET 0x0d2
+#define OMAP2420_CONTROL_PADCONF_SPI1_NCS1_OFFSET 0x0d3
+#define OMAP2420_CONTROL_PADCONF_SPI1_NCS2_OFFSET 0x0d4
+#define OMAP2420_CONTROL_PADCONF_SPI1_NCS3_OFFSET 0x0d5
+#define OMAP2420_CONTROL_PADCONF_SPI2_CLK_OFFSET 0x0d6
+#define OMAP2420_CONTROL_PADCONF_SPI2_SIMO_OFFSET 0x0d7
+#define OMAP2420_CONTROL_PADCONF_SPI2_SOMI_OFFSET 0x0d8
+#define OMAP2420_CONTROL_PADCONF_SPI2_NCS0_OFFSET 0x0d9
+#define OMAP2420_CONTROL_PADCONF_MCBSP1_CLKR_OFFSET 0x0da
+#define OMAP2420_CONTROL_PADCONF_MCBSP1_FSR_OFFSET 0x0db
+#define OMAP2420_CONTROL_PADCONF_MCBSP1_DX_OFFSET 0x0dc
+#define OMAP2420_CONTROL_PADCONF_MCBSP1_DR_OFFSET 0x0dd
+#define OMAP2420_CONTROL_PADCONF_MCBSP_CLKS_OFFSET 0x0de
+#define OMAP2420_CONTROL_PADCONF_MCBSP1_FSX_OFFSET 0x0df
+#define OMAP2420_CONTROL_PADCONF_MCBSP1_CLKX_OFFSET 0x0e0
+#define OMAP2420_CONTROL_PADCONF_I2C1_SCL_OFFSET 0x0e1
+#define OMAP2420_CONTROL_PADCONF_I2C1_SDA_OFFSET 0x0e2
+#define OMAP2420_CONTROL_PADCONF_I2C2_SCL_OFFSET 0x0e3
+#define OMAP2420_CONTROL_PADCONF_I2C2_SDA_OFFSET 0x0e4
+#define OMAP2420_CONTROL_PADCONF_HDQ_SIO_OFFSET 0x0e5
+#define OMAP2420_CONTROL_PADCONF_UART3_CTS_RCTX_OFFSET 0x0e6
+#define OMAP2420_CONTROL_PADCONF_UART3_RTS_SD_OFFSET 0x0e7
+#define OMAP2420_CONTROL_PADCONF_UART3_TX_IRTX_OFFSET 0x0e8
+#define OMAP2420_CONTROL_PADCONF_UART3_RX_IRRX_OFFSET 0x0e9
+#define OMAP2420_CONTROL_PADCONF_TV_CVBS_OFFSET 0x0ea
+#define OMAP2420_CONTROL_PADCONF_TV_VREF_OFFSET 0x0eb
+#define OMAP2420_CONTROL_PADCONF_TV_RREF_OFFSET 0x0ec
+#define OMAP2420_CONTROL_PADCONF_USB0_PUEN_OFFSET 0x0ed
+#define OMAP2420_CONTROL_PADCONF_USB0_VP_OFFSET 0x0ee
+#define OMAP2420_CONTROL_PADCONF_USB0_VM_OFFSET 0x0ef
+#define OMAP2420_CONTROL_PADCONF_USB0_RCV_OFFSET 0x0f0
+#define OMAP2420_CONTROL_PADCONF_USB0_TXEN_OFFSET 0x0f1
+#define OMAP2420_CONTROL_PADCONF_USB0_SE0_OFFSET 0x0f2
+#define OMAP2420_CONTROL_PADCONF_USB0_DAT_OFFSET 0x0f3
+#define OMAP2420_CONTROL_PADCONF_EAC_AC_SCLK_OFFSET 0x0f4
+#define OMAP2420_CONTROL_PADCONF_EAC_AC_FS_OFFSET 0x0f5
+#define OMAP2420_CONTROL_PADCONF_EAC_AC_DIN_OFFSET 0x0f6
+#define OMAP2420_CONTROL_PADCONF_EAC_AC_DOUT_OFFSET 0x0f7
+#define OMAP2420_CONTROL_PADCONF_EAC_AC_MCLK_OFFSET 0x0f8
+#define OMAP2420_CONTROL_PADCONF_EAC_AC_RST_OFFSET 0x0f9
+#define OMAP2420_CONTROL_PADCONF_SYS_NRESPWRON_OFFSET 0x0fa
+#define OMAP2420_CONTROL_PADCONF_SYS_NRESWARM_OFFSET 0x0fb
+#define OMAP2420_CONTROL_PADCONF_SYS_NIRQ_OFFSET 0x0fc
+#define OMAP2420_CONTROL_PADCONF_SYS_NV_OFFSET 0x0fd
+#define OMAP2420_CONTROL_PADCONF_GPIO_119_OFFSET 0x0fe
+#define OMAP2420_CONTROL_PADCONF_GPIO_120_OFFSET 0x0ff
+#define OMAP2420_CONTROL_PADCONF_GPIO_121_OFFSET 0x100
+#define OMAP2420_CONTROL_PADCONF_GPIO_122_OFFSET 0x101
+#define OMAP2420_CONTROL_PADCONF_SYS_32K_OFFSET 0x102
+#define OMAP2420_CONTROL_PADCONF_SYS_XTALIN_OFFSET 0x103
+#define OMAP2420_CONTROL_PADCONF_SYS_XTALOUT_OFFSET 0x104
+#define OMAP2420_CONTROL_PADCONF_GPIO_36_OFFSET 0x105
+#define OMAP2420_CONTROL_PADCONF_SYS_CLKREQ_OFFSET 0x106
+#define OMAP2420_CONTROL_PADCONF_SYS_CLKOUT_OFFSET 0x107
+#define OMAP2420_CONTROL_PADCONF_GPIO_6_OFFSET 0x108
+#define OMAP2420_CONTROL_PADCONF_GPIO_124_OFFSET 0x109
+#define OMAP2420_CONTROL_PADCONF_GPIO_125_OFFSET 0x10a
+#define OMAP2420_CONTROL_PADCONF_JTAG_EMU1_OFFSET 0x10b
+#define OMAP2420_CONTROL_PADCONF_JTAG_EMU0_OFFSET 0x10c
+#define OMAP2420_CONTROL_PADCONF_JTAG_NTRST_OFFSET 0x10d
+#define OMAP2420_CONTROL_PADCONF_JTAG_TCK_OFFSET 0x10e
+#define OMAP2420_CONTROL_PADCONF_JTAG_RTCK_OFFSET 0x10f
+#define OMAP2420_CONTROL_PADCONF_JTAG_TMS_OFFSET 0x110
+#define OMAP2420_CONTROL_PADCONF_JTAG_TDI_OFFSET 0x111
+#define OMAP2420_CONTROL_PADCONF_JTAG_TDO_OFFSET 0x112
+
+#define OMAP2420_CONTROL_PADCONF_MUX_SIZE \
+ (OMAP2420_CONTROL_PADCONF_JTAG_TDO_OFFSET + 0x1)
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 06/16] omap: mux: Add data for 2430
2010-06-30 12:06 [PATCH 00/16] omap mux updates for 2.6.36 merge window Tony Lindgren
` (4 preceding siblings ...)
2010-06-30 12:06 ` [PATCH 05/16] omap: mux: Add data for 2420 Tony Lindgren
@ 2010-06-30 12:06 ` Tony Lindgren
2010-06-30 12:06 ` [PATCH 07/16] omap: mux: Select SIP package for H4 Tony Lindgren
` (9 subsequent siblings)
15 siblings, 0 replies; 23+ messages in thread
From: Tony Lindgren @ 2010-06-30 12:06 UTC (permalink / raw)
To: linux-arm-kernel
Add data for 2430. Big thanks to Paul Walmsley <paul@pwsan.com>
for generating usable mux data out of TRMs.
Cc: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/Makefile | 1
arch/arm/mach-omap2/mux.h | 8
arch/arm/mach-omap2/mux2430.c | 791 +++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-omap2/mux2430.h | 370 +++++++++++++++++++
4 files changed, 1170 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-omap2/mux2430.c
create mode 100644 arch/arm/mach-omap2/mux2430.h
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index b7e5537..0f2f508 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -37,6 +37,7 @@ AFLAGS_sram34xx.o :=-Wa,-march=armv7-a
# Pin multiplexing
obj-$(CONFIG_ARCH_OMAP2420) += mux2420.o
+obj-$(CONFIG_ARCH_OMAP2430) += mux2430.o
obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o
# SMS/SDRC
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index e14cd4d..a8e040c 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -8,6 +8,7 @@
*/
#include "mux2420.h"
+#include "mux2430.h"
#include "mux34xx.h"
#define OMAP_MUX_TERMINATOR 0xffff
@@ -181,6 +182,13 @@ void omap_mux_write_array(struct omap_board_mux *board_mux);
int omap2420_mux_init(struct omap_board_mux *board_mux, int flags);
/**
+ * omap2430_mux_init() - initialize mux system with board specific set
+ * @board_mux: Board specific mux table
+ * @flags: OMAP package type used for the board
+ */
+int omap2430_mux_init(struct omap_board_mux *board_mux, int flags);
+
+/**
* omap3_mux_init() - initialize mux system with board specific set
* @board_mux: Board specific mux table
* @flags: OMAP package type used for the board
diff --git a/arch/arm/mach-omap2/mux2430.c b/arch/arm/mach-omap2/mux2430.c
new file mode 100644
index 0000000..7dcaaa8
--- /dev/null
+++ b/arch/arm/mach-omap2/mux2430.c
@@ -0,0 +1,791 @@
+/*
+ * Copyright (C) 2010 Nokia
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include "mux.h"
+
+#ifdef CONFIG_OMAP_MUX
+
+#define _OMAP2430_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \
+{ \
+ .reg_offset = (OMAP2430_CONTROL_PADCONF_##M0##_OFFSET), \
+ .gpio = (g), \
+ .muxnames = { m0, m1, m2, m3, m4, m5, m6, m7 }, \
+}
+
+#else
+
+#define _OMAP2430_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \
+{ \
+ .reg_offset = (OMAP2430_CONTROL_PADCONF_##M0##_OFFSET), \
+ .gpio = (g), \
+}
+
+#endif
+
+#define _OMAP2430_BALLENTRY(M0, bb, bt) \
+{ \
+ .reg_offset = (OMAP2430_CONTROL_PADCONF_##M0##_OFFSET), \
+ .balls = { bb, bt }, \
+}
+
+/*
+ * Superset of all mux modes for omap2430
+ */
+static struct omap_mux __initdata omap2430_muxmodes[] = {
+ _OMAP2430_MUXENTRY(CAM_D0, 133,
+ "cam_d0", "hw_dbg0", "sti_dout", "gpio_133",
+ NULL, NULL, "etk_d2", "safe_mode"),
+ _OMAP2430_MUXENTRY(CAM_D10, 146,
+ "cam_d10", NULL, NULL, "gpio_146",
+ NULL, NULL, "etk_d12", "safe_mode"),
+ _OMAP2430_MUXENTRY(CAM_D11, 145,
+ "cam_d11", NULL, NULL, "gpio_145",
+ NULL, NULL, "etk_d13", "safe_mode"),
+ _OMAP2430_MUXENTRY(CAM_D1, 132,
+ "cam_d1", "hw_dbg1", "sti_din", "gpio_132",
+ NULL, NULL, "etk_d3", "safe_mode"),
+ _OMAP2430_MUXENTRY(CAM_D2, 129,
+ "cam_d2", "hw_dbg2", "mcbsp1_clkx", "gpio_129",
+ NULL, NULL, "etk_d4", "safe_mode"),
+ _OMAP2430_MUXENTRY(CAM_D3, 128,
+ "cam_d3", "hw_dbg3", "mcbsp1_dr", "gpio_128",
+ NULL, NULL, "etk_d5", "safe_mode"),
+ _OMAP2430_MUXENTRY(CAM_D4, 143,
+ "cam_d4", "hw_dbg4", "mcbsp1_fsr", "gpio_143",
+ NULL, NULL, "etk_d6", "safe_mode"),
+ _OMAP2430_MUXENTRY(CAM_D5, 112,
+ "cam_d5", "hw_dbg5", "mcbsp1_clkr", "gpio_112",
+ NULL, NULL, "etk_d7", "safe_mode"),
+ _OMAP2430_MUXENTRY(CAM_D6, 137,
+ "cam_d6", "hw_dbg6", NULL, "gpio_137",
+ NULL, NULL, "etk_d8", "safe_mode"),
+ _OMAP2430_MUXENTRY(CAM_D7, 136,
+ "cam_d7", "hw_dbg7", NULL, "gpio_136",
+ NULL, NULL, "etk_d9", "safe_mode"),
+ _OMAP2430_MUXENTRY(CAM_D8, 135,
+ "cam_d8", "hw_dbg8", NULL, "gpio_135",
+ NULL, NULL, "etk_d10", "safe_mode"),
+ _OMAP2430_MUXENTRY(CAM_D9, 134,
+ "cam_d9", "hw_dbg9", NULL, "gpio_134",
+ NULL, NULL, "etk_d11", "safe_mode"),
+ _OMAP2430_MUXENTRY(CAM_HS, 11,
+ "cam_hs", "hw_dbg10", "mcbsp1_dx", "gpio_11",
+ NULL, NULL, "etk_d1", "safe_mode"),
+ _OMAP2430_MUXENTRY(CAM_LCLK, 0,
+ "cam_lclk", NULL, "mcbsp_clks", NULL,
+ NULL, NULL, "etk_c1", "safe_mode"),
+ _OMAP2430_MUXENTRY(CAM_VS, 12,
+ "cam_vs", "hw_dbg11", "mcbsp1_fsx", "gpio_12",
+ NULL, NULL, "etk_d0", "safe_mode"),
+ _OMAP2430_MUXENTRY(CAM_XCLK, 0,
+ "cam_xclk", NULL, "sti_clk", NULL,
+ NULL, NULL, "etk_c2", NULL),
+ _OMAP2430_MUXENTRY(DSS_ACBIAS, 48,
+ "dss_acbias", NULL, "mcbsp2_fsx", "gpio_48",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(DSS_DATA0, 40,
+ "dss_data0", "uart1_cts", NULL, "gpio_40",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(DSS_DATA10, 128,
+ "dss_data10", "sdi_data1n", NULL, "gpio_128",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(DSS_DATA11, 129,
+ "dss_data11", "sdi_data1p", NULL, "gpio_129",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(DSS_DATA12, 130,
+ "dss_data12", "sdi_data2n", NULL, "gpio_130",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(DSS_DATA13, 131,
+ "dss_data13", "sdi_data2p", NULL, "gpio_131",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(DSS_DATA14, 132,
+ "dss_data14", "sdi_data3n", NULL, "gpio_132",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(DSS_DATA15, 133,
+ "dss_data15", "sdi_data3p", NULL, "gpio_133",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(DSS_DATA16, 46,
+ "dss_data16", NULL, NULL, "gpio_46",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(DSS_DATA17, 47,
+ "dss_data17", NULL, NULL, "gpio_47",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(DSS_DATA1, 41,
+ "dss_data1", "uart1_rts", NULL, "gpio_41",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(DSS_DATA2, 42,
+ "dss_data2", "uart1_tx", NULL, "gpio_42",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(DSS_DATA3, 43,
+ "dss_data3", "uart1_rx", NULL, "gpio_43",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(DSS_DATA4, 44,
+ "dss_data4", "uart3_rx_irrx", NULL, "gpio_44",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(DSS_DATA5, 45,
+ "dss_data5", "uart3_tx_irtx", NULL, "gpio_45",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(DSS_DATA6, 144,
+ "dss_data6", NULL, NULL, "gpio_144",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(DSS_DATA7, 147,
+ "dss_data7", NULL, NULL, "gpio_147",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(DSS_DATA8, 38,
+ "dss_data8", NULL, NULL, "gpio_38",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(DSS_DATA9, 39,
+ "dss_data9", NULL, NULL, "gpio_39",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(DSS_HSYNC, 110,
+ "dss_hsync", NULL, NULL, "gpio_110",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_113, 113,
+ "gpio_113", "mcbsp2_clkx", NULL, "gpio_113",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_114, 114,
+ "gpio_114", "mcbsp2_fsx", NULL, "gpio_114",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_115, 115,
+ "gpio_115", "mcbsp2_dr", NULL, "gpio_115",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_116, 116,
+ "gpio_116", "mcbsp2_dx", NULL, "gpio_116",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_128, 128,
+ "gpio_128", NULL, "sti_din", "gpio_128",
+ NULL, "sys_boot0", NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_129, 129,
+ "gpio_129", NULL, "sti_dout", "gpio_129",
+ NULL, "sys_boot1", NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_130, 130,
+ "gpio_130", NULL, NULL, "gpio_130",
+ "jtag_emu2", "sys_boot2", NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_131, 131,
+ "gpio_131", NULL, NULL, "gpio_131",
+ "jtag_emu3", "sys_boot3", NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_132, 132,
+ "gpio_132", NULL, NULL, "gpio_132",
+ NULL, "sys_boot4", NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_133, 133,
+ "gpio_133", NULL, NULL, "gpio_133",
+ NULL, "sys_boot5", NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_134, 134,
+ "gpio_134", "ccp_datn", NULL, "gpio_134",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_135, 135,
+ "gpio_135", "ccp_datp", NULL, "gpio_135",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_136, 136,
+ "gpio_136", "ccp_clkn", NULL, "gpio_136",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_137, 137,
+ "gpio_137", "ccp_clkp", NULL, "gpio_137",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_138, 138,
+ "gpio_138", "spi3_clk", NULL, "gpio_138",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_139, 139,
+ "gpio_139", "spi3_cs0", "sys_ndmareq3", "gpio_139",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_140, 140,
+ "gpio_140", "spi3_simo", "sys_ndmareq4", "gpio_140",
+ NULL, NULL, "etk_d14", "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_141, 141,
+ "gpio_141", "spi3_somi", NULL, "gpio_141",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_142, 142,
+ "gpio_142", "spi3_cs1", "sys_ndmareq2", "gpio_142",
+ NULL, NULL, "etk_d15", "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_148, 148,
+ "gpio_148", "mcbsp5_fsx", NULL, "gpio_148",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_149, 149,
+ "gpio_149", "mcbsp5_dx", NULL, "gpio_149",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_150, 150,
+ "gpio_150", "mcbsp5_dr", NULL, "gpio_150",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_151, 151,
+ "gpio_151", "sys_pwrok", NULL, "gpio_151",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_152, 152,
+ "gpio_152", "uart1_cts", "sys_ndmareq1", "gpio_152",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_153, 153,
+ "gpio_153", "uart1_rx", "sys_ndmareq0", "gpio_153",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_154, 154,
+ "gpio_154", "mcbsp5_clkx", NULL, "gpio_154",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_63, 63,
+ "gpio_63", "mcbsp4_clkx", NULL, "gpio_63",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_78, 78,
+ "gpio_78", NULL, "uart2_rts", "gpio_78",
+ "uart3_rts_sd", NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_79, 79,
+ "gpio_79", "secure_indicator", "uart2_tx", "gpio_79",
+ "uart3_tx_irtx", NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_7, 7,
+ "gpio_7", NULL, "uart2_cts", "gpio_7",
+ "uart3_cts_rctx", NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPIO_80, 80,
+ "gpio_80", NULL, "uart2_rx", "gpio_80",
+ "uart3_rx_irrx", NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPMC_A10, 3,
+ "gpmc_a10", NULL, "sys_ndmareq0", "gpio_3",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPMC_A1, 31,
+ "gpmc_a1", NULL, NULL, "gpio_31",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPMC_A2, 30,
+ "gpmc_a2", NULL, NULL, "gpio_30",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPMC_A3, 29,
+ "gpmc_a3", NULL, NULL, "gpio_29",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPMC_A4, 49,
+ "gpmc_a4", NULL, NULL, "gpio_49",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPMC_A5, 53,
+ "gpmc_a5", NULL, NULL, "gpio_53",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPMC_A6, 52,
+ "gpmc_a6", NULL, NULL, "gpio_52",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPMC_A7, 6,
+ "gpmc_a7", NULL, NULL, "gpio_6",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPMC_A8, 5,
+ "gpmc_a8", NULL, NULL, "gpio_5",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPMC_A9, 4,
+ "gpmc_a9", NULL, "sys_ndmareq1", "gpio_4",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPMC_CLK, 21,
+ "gpmc_clk", NULL, NULL, "gpio_21",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPMC_D10, 18,
+ "gpmc_d10", NULL, NULL, "gpio_18",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPMC_D11, 57,
+ "gpmc_d11", NULL, NULL, "gpio_57",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPMC_D12, 77,
+ "gpmc_d12", NULL, NULL, "gpio_77",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPMC_D13, 76,
+ "gpmc_d13", NULL, NULL, "gpio_76",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPMC_D14, 55,
+ "gpmc_d14", NULL, NULL, "gpio_55",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPMC_D15, 54,
+ "gpmc_d15", NULL, NULL, "gpio_54",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPMC_D8, 20,
+ "gpmc_d8", NULL, NULL, "gpio_20",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPMC_D9, 19,
+ "gpmc_d9", NULL, NULL, "gpio_19",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPMC_NCS1, 22,
+ "gpmc_ncs1", NULL, NULL, "gpio_22",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPMC_NCS2, 23,
+ "gpmc_ncs2", NULL, NULL, "gpio_23",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPMC_NCS3, 24,
+ "gpmc_ncs3", "gpmc_io_dir", NULL, "gpio_24",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPMC_NCS4, 25,
+ "gpmc_ncs4", NULL, NULL, "gpio_25",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPMC_NCS5, 26,
+ "gpmc_ncs5", NULL, NULL, "gpio_26",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPMC_NCS6, 27,
+ "gpmc_ncs6", NULL, NULL, "gpio_27",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPMC_NCS7, 28,
+ "gpmc_ncs7", "gpmc_io_dir", NULL, "gpio_28",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPMC_WAIT1, 33,
+ "gpmc_wait1", NULL, NULL, "gpio_33",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPMC_WAIT2, 34,
+ "gpmc_wait2", NULL, NULL, "gpio_34",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(GPMC_WAIT3, 35,
+ "gpmc_wait3", NULL, NULL, "gpio_35",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(HDQ_SIO, 101,
+ "hdq_sio", "usb2_tllse0", "sys_altclk", "gpio_101",
+ "uart3_rx_irrx", NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(I2C1_SCL, 50,
+ "i2c1_scl", NULL, NULL, "gpio_50",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(I2C1_SDA, 51,
+ "i2c1_sda", NULL, NULL, "gpio_51",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(I2C2_SCL, 99,
+ "i2c2_scl", NULL, NULL, "gpio_99",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(I2C2_SDA, 100,
+ "i2c2_sda", NULL, NULL, "gpio_100",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(JTAG_EMU0, 127,
+ "jtag_emu0", "secure_indicator", NULL, "gpio_127",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(JTAG_EMU1, 126,
+ "jtag_emu1", NULL, NULL, "gpio_126",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(MCBSP1_CLKR, 92,
+ "mcbsp1_clkr", "ssi2_dat_tx", NULL, "gpio_92",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(MCBSP1_CLKX, 98,
+ "mcbsp1_clkx", "ssi2_wake", NULL, "gpio_98",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(MCBSP1_DR, 95,
+ "mcbsp1_dr", "ssi2_dat_rx", NULL, "gpio_95",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(MCBSP1_DX, 94,
+ "mcbsp1_dx", "ssi2_rdy_tx", NULL, "gpio_94",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(MCBSP1_FSR, 93,
+ "mcbsp1_fsr", "ssi2_flag_tx", NULL, "gpio_93",
+ "spi2_cs1", NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(MCBSP1_FSX, 97,
+ "mcbsp1_fsx", "ssi2_rdy_rx", NULL, "gpio_97",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(MCBSP2_CLKX, 147,
+ "mcbsp2_clkx", "sdi_clkp", "dss_data23", "gpio_147",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(MCBSP2_DR, 144,
+ "mcbsp2_dr", "sdi_clkn", "dss_data22", "gpio_144",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(MCBSP3_CLKX, 71,
+ "mcbsp3_clkx", NULL, NULL, "gpio_71",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(MCBSP3_DR, 73,
+ "mcbsp3_dr", NULL, NULL, "gpio_73",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(MCBSP3_DX, 74,
+ "mcbsp3_dx", NULL, "sti_clk", "gpio_74",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(MCBSP3_FSX, 72,
+ "mcbsp3_fsx", NULL, NULL, "gpio_72",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(MCBSP_CLKS, 96,
+ "mcbsp_clks", "ssi2_flag_rx", NULL, "gpio_96",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SDMMC1_CLKO, 0,
+ "sdmmc1_clko", "ms_clko", NULL, NULL,
+ NULL, "hw_dbg9", "hw_dbg3", "safe_mode"),
+ _OMAP2430_MUXENTRY(SDMMC1_CMD, 0,
+ "sdmmc1_cmd", "ms_bs", NULL, NULL,
+ NULL, "hw_dbg8", "hw_dbg2", "safe_mode"),
+ _OMAP2430_MUXENTRY(SDMMC1_DAT0, 0,
+ "sdmmc1_dat0", "ms_dat0", NULL, NULL,
+ NULL, "hw_dbg7", "hw_dbg1", "safe_mode"),
+ _OMAP2430_MUXENTRY(SDMMC1_DAT1, 75,
+ "sdmmc1_dat1", "ms_dat1", NULL, "gpio_75",
+ NULL, "hw_dbg6", "hw_dbg0", "safe_mode"),
+ _OMAP2430_MUXENTRY(SDMMC1_DAT2, 0,
+ "sdmmc1_dat2", "ms_dat2", NULL, NULL,
+ NULL, "hw_dbg5", "hw_dbg10", "safe_mode"),
+ _OMAP2430_MUXENTRY(SDMMC1_DAT3, 0,
+ "sdmmc1_dat3", "ms_dat3", NULL, NULL,
+ NULL, "hw_dbg4", "hw_dbg11", "safe_mode"),
+ _OMAP2430_MUXENTRY(SDMMC2_CLKO, 13,
+ "sdmmc2_clko", NULL, NULL, "gpio_13",
+ NULL, "spi3_clk", NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SDMMC2_CMD, 15,
+ "sdmmc2_cmd", "usb2_rcv", NULL, "gpio_15",
+ NULL, "spi3_simo", NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SDMMC2_DAT0, 16,
+ "sdmmc2_dat0", "usb2_tllse0", NULL, "gpio_16",
+ NULL, "spi3_somi", NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SDMMC2_DAT1, 58,
+ "sdmmc2_dat1", "usb2_txen", NULL, "gpio_58",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SDMMC2_DAT2, 17,
+ "sdmmc2_dat2", "usb2_dat", NULL, "gpio_17",
+ NULL, "spi3_cs1", NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SDMMC2_DAT3, 14,
+ "sdmmc2_dat3", "usb2_se0", NULL, "gpio_14",
+ NULL, "spi3_cs0", NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SDRC_A12, 2,
+ "sdrc_a12", NULL, NULL, "gpio_2",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SDRC_A13, 1,
+ "sdrc_a13", NULL, NULL, "gpio_1",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SDRC_A14, 0,
+ "sdrc_a14", NULL, NULL, "gpio_0",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SDRC_CKE1, 36,
+ "sdrc_cke1", NULL, NULL, "gpio_36",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SDRC_NCS1, 37,
+ "sdrc_ncs1", NULL, NULL, "gpio_37",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SPI1_CLK, 81,
+ "spi1_clk", NULL, NULL, "gpio_81",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SPI1_CS0, 84,
+ "spi1_cs0", NULL, NULL, "gpio_84",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SPI1_CS1, 85,
+ "spi1_cs1", NULL, NULL, "gpio_85",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SPI1_CS2, 86,
+ "spi1_cs2", NULL, NULL, "gpio_86",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SPI1_CS3, 87,
+ "spi1_cs3", "spi2_cs1", NULL, "gpio_87",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SPI1_SIMO, 82,
+ "spi1_simo", NULL, NULL, "gpio_82",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SPI1_SOMI, 83,
+ "spi1_somi", NULL, NULL, "gpio_83",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SPI2_CLK, 88,
+ "spi2_clk", "gpt9_pwm_evt", NULL, "gpio_88",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SPI2_CS0, 91,
+ "spi2_cs0", "gpt12_pwm_evt", NULL, "gpio_91",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SPI2_SIMO, 89,
+ "spi2_simo", "gpt10_pwm_evt", NULL, "gpio_89",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SPI2_SOMI, 90,
+ "spi2_somi", "gpt11_pwm_evt", NULL, "gpio_90",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SSI1_DAT_RX, 62,
+ "ssi1_dat_rx", "uart1_rx", "usb1_dat", "gpio_62",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SSI1_DAT_TX, 59,
+ "ssi1_dat_tx", "uart1_tx", "usb1_se0", "gpio_59",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SSI1_FLAG_RX, 64,
+ "ssi1_flag_rx", "mcbsp4_dr", NULL, "gpio_64",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SSI1_FLAG_TX, 60,
+ "ssi1_flag_tx", "uart1_rts", "usb1_rcv", "gpio_60",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SSI1_RDY_RX, 65,
+ "ssi1_rdy_rx", "mcbsp4_dx", NULL, "gpio_65",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SSI1_RDY_TX, 61,
+ "ssi1_rdy_tx", "uart1_cts", "usb1_txen", "gpio_61",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SSI1_WAKE, 66,
+ "ssi1_wake", "mcbsp4_fsx", NULL, "gpio_66",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SYS_CLKOUT, 111,
+ "sys_clkout", NULL, NULL, "gpio_111",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SYS_DRM_MSECURE, 118,
+ "sys_drm_msecure", NULL, "sys_ndmareq6", "gpio_118",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SYS_NIRQ0, 56,
+ "sys_nirq0", NULL, NULL, "gpio_56",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(SYS_NIRQ1, 125,
+ "sys_nirq1", NULL, "sys_ndmareq5", "gpio_125",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(UART1_CTS, 32,
+ "uart1_cts", "sdi_vsync", "dss_data18", "gpio_32",
+ "mcbsp5_clkx", NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(UART1_RTS, 8,
+ "uart1_rts", "sdi_hsync", "dss_data19", "gpio_8",
+ "mcbsp5_fsx", NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(UART1_RX, 10,
+ "uart1_rx", "sdi_stp", "dss_data21", "gpio_10",
+ "mcbsp5_dr", NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(UART1_TX, 9,
+ "uart1_tx", "sdi_den", "dss_data20", "gpio_9",
+ "mcbsp5_dx", NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(UART2_CTS, 67,
+ "uart2_cts", "usb1_rcv", "gpt9_pwm_evt", "gpio_67",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(UART2_RTS, 68,
+ "uart2_rts", "usb1_txen", "gpt10_pwm_evt", "gpio_68",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(UART2_RX, 70,
+ "uart2_rx", "usb1_dat", "gpt12_pwm_evt", "gpio_70",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(UART2_TX, 69,
+ "uart2_tx", "usb1_se0", "gpt11_pwm_evt", "gpio_69",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(UART3_CTS_RCTX, 102,
+ "uart3_cts_rctx", "uart3_rx_irrx", NULL, "gpio_102",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(UART3_RTS_SD, 103,
+ "uart3_rts_sd", "uart3_tx_irtx", NULL, "gpio_103",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(UART3_RX_IRRX, 105,
+ "uart3_rx_irrx", NULL, NULL, "gpio_105",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(UART3_TX_IRTX, 104,
+ "uart3_tx_irtx", "uart3_cts_rctx", NULL, "gpio_104",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(USB0HS_CLK, 120,
+ "usb0hs_clk", NULL, NULL, "gpio_120",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(USB0HS_DATA0, 0,
+ "usb0hs_data0", "uart3_tx_irtx", NULL, NULL,
+ "usb0_txen", NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(USB0HS_DATA1, 0,
+ "usb0hs_data1", "uart3_rx_irrx", NULL, NULL,
+ "usb0_dat", NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(USB0HS_DATA2, 0,
+ "usb0hs_data2", "uart3_rts_sd", NULL, NULL,
+ "usb0_se0", NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(USB0HS_DATA3, 106,
+ "usb0hs_data3", NULL, "uart3_cts_rctx", "gpio_106",
+ "usb0_puen", NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(USB0HS_DATA4, 107,
+ "usb0hs_data4", "mcbsp2_dr", NULL, "gpio_107",
+ "usb0_vp", NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(USB0HS_DATA5, 108,
+ "usb0hs_data5", "mcbsp2_dx", NULL, "gpio_108",
+ "usb0_vm", NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(USB0HS_DATA6, 109,
+ "usb0hs_data6", "mcbsp2_fsx", NULL, "gpio_109",
+ "usb0_rcv", NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(USB0HS_DATA7, 124,
+ "usb0hs_data7", "mcbsp2_clkx", NULL, "gpio_124",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(USB0HS_DIR, 121,
+ "usb0hs_dir", NULL, NULL, "gpio_121",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(USB0HS_NXT, 123,
+ "usb0hs_nxt", NULL, NULL, "gpio_123",
+ NULL, NULL, NULL, "safe_mode"),
+ _OMAP2430_MUXENTRY(USB0HS_STP, 122,
+ "usb0hs_stp", NULL, NULL, "gpio_122",
+ NULL, NULL, NULL, "safe_mode"),
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+/*
+ * Balls for POP package
+ * 447-pin s-PBGA Package, 0.00mm Ball Pitch (Bottom)
+ */
+#ifdef CONFIG_DEBUG_FS
+struct omap_ball __initdata omap2430_pop_ball[] = {
+ _OMAP2430_BALLENTRY(CAM_D0, "t8", NULL),
+ _OMAP2430_BALLENTRY(CAM_D1, "t4", NULL),
+ _OMAP2430_BALLENTRY(CAM_D10, "r4", NULL),
+ _OMAP2430_BALLENTRY(CAM_D11, "w3", NULL),
+ _OMAP2430_BALLENTRY(CAM_D2, "r2", NULL),
+ _OMAP2430_BALLENTRY(CAM_D3, "u3", NULL),
+ _OMAP2430_BALLENTRY(CAM_D4, "u2", NULL),
+ _OMAP2430_BALLENTRY(CAM_D5, "v1", NULL),
+ _OMAP2430_BALLENTRY(CAM_D6, "t3", NULL),
+ _OMAP2430_BALLENTRY(CAM_D7, "r3", NULL),
+ _OMAP2430_BALLENTRY(CAM_D8, "u7", NULL),
+ _OMAP2430_BALLENTRY(CAM_D9, "t7", NULL),
+ _OMAP2430_BALLENTRY(CAM_HS, "p2", NULL),
+ _OMAP2430_BALLENTRY(CAM_LCLK, "r7", NULL),
+ _OMAP2430_BALLENTRY(CAM_VS, "n2", NULL),
+ _OMAP2430_BALLENTRY(CAM_XCLK, "p3", NULL),
+ _OMAP2430_BALLENTRY(DSS_ACBIAS, "y3", NULL),
+ _OMAP2430_BALLENTRY(DSS_DATA0, "v8", NULL),
+ _OMAP2430_BALLENTRY(DSS_DATA1, "w1", NULL),
+ _OMAP2430_BALLENTRY(DSS_DATA10, "k25", NULL),
+ _OMAP2430_BALLENTRY(DSS_DATA11, "j25", NULL),
+ _OMAP2430_BALLENTRY(DSS_DATA12, "k24", NULL),
+ _OMAP2430_BALLENTRY(DSS_DATA13, "j24", NULL),
+ _OMAP2430_BALLENTRY(DSS_DATA14, "h25", NULL),
+ _OMAP2430_BALLENTRY(DSS_DATA15, "g25", NULL),
+ _OMAP2430_BALLENTRY(DSS_DATA16, "ac3", NULL),
+ _OMAP2430_BALLENTRY(DSS_DATA17, "y7", NULL),
+ _OMAP2430_BALLENTRY(DSS_DATA2, "u8", NULL),
+ _OMAP2430_BALLENTRY(DSS_DATA3, "u4", NULL),
+ _OMAP2430_BALLENTRY(DSS_DATA4, "v3", NULL),
+ _OMAP2430_BALLENTRY(DSS_DATA5, "aa4", NULL),
+ _OMAP2430_BALLENTRY(DSS_DATA6, "w8", NULL),
+ _OMAP2430_BALLENTRY(DSS_DATA7, "y1", NULL),
+ _OMAP2430_BALLENTRY(DSS_DATA8, "aa2", NULL),
+ _OMAP2430_BALLENTRY(DSS_DATA9, "ab4", NULL),
+ _OMAP2430_BALLENTRY(DSS_HSYNC, "v2", NULL),
+ _OMAP2430_BALLENTRY(GPIO_113, "ad16", NULL),
+ _OMAP2430_BALLENTRY(GPIO_114, "ac10", NULL),
+ _OMAP2430_BALLENTRY(GPIO_115, "ad13", NULL),
+ _OMAP2430_BALLENTRY(GPIO_116, "ae15", NULL),
+ _OMAP2430_BALLENTRY(GPIO_128, "p1", NULL),
+ _OMAP2430_BALLENTRY(GPIO_129, "r1", NULL),
+ _OMAP2430_BALLENTRY(GPIO_130, "p7", NULL),
+ _OMAP2430_BALLENTRY(GPIO_131, "l8", NULL),
+ _OMAP2430_BALLENTRY(GPIO_132, "w24", NULL),
+ _OMAP2430_BALLENTRY(GPIO_133, "aa24", NULL),
+ _OMAP2430_BALLENTRY(GPIO_134, "ae12", NULL),
+ _OMAP2430_BALLENTRY(GPIO_135, "ae11", NULL),
+ _OMAP2430_BALLENTRY(GPIO_136, "ad12", NULL),
+ _OMAP2430_BALLENTRY(GPIO_137, "ad11", NULL),
+ _OMAP2430_BALLENTRY(GPIO_138, "y12", NULL),
+ _OMAP2430_BALLENTRY(GPIO_139, "ad17", NULL),
+ _OMAP2430_BALLENTRY(GPIO_140, "l7", NULL),
+ _OMAP2430_BALLENTRY(GPIO_141, "ac24", NULL),
+ _OMAP2430_BALLENTRY(GPIO_142, "m3", NULL),
+ _OMAP2430_BALLENTRY(GPIO_148, "af12", NULL),
+ _OMAP2430_BALLENTRY(GPIO_149, "k7", NULL),
+ _OMAP2430_BALLENTRY(GPIO_150, "m1", NULL),
+ _OMAP2430_BALLENTRY(GPIO_151, "ad14", NULL),
+ _OMAP2430_BALLENTRY(GPIO_152, "ad18", NULL),
+ _OMAP2430_BALLENTRY(GPIO_153, "u24", NULL),
+ _OMAP2430_BALLENTRY(GPIO_154, "ae16", NULL),
+ _OMAP2430_BALLENTRY(GPIO_63, "n3", NULL),
+ _OMAP2430_BALLENTRY(GPIO_7, "ac23", NULL),
+ _OMAP2430_BALLENTRY(GPIO_78, "ad10", NULL),
+ _OMAP2430_BALLENTRY(GPIO_79, "ae10", NULL),
+ _OMAP2430_BALLENTRY(GPIO_80, "ae13", NULL),
+ _OMAP2430_BALLENTRY(GPMC_A1, "a9", NULL),
+ _OMAP2430_BALLENTRY(GPMC_A10, "g12", NULL),
+ _OMAP2430_BALLENTRY(GPMC_A2, "b8", NULL),
+ _OMAP2430_BALLENTRY(GPMC_A3, "g10", NULL),
+ _OMAP2430_BALLENTRY(GPMC_A4, "g11", NULL),
+ _OMAP2430_BALLENTRY(GPMC_A5, "a10", NULL),
+ _OMAP2430_BALLENTRY(GPMC_A6, "g13", NULL),
+ _OMAP2430_BALLENTRY(GPMC_A7, "a6", NULL),
+ _OMAP2430_BALLENTRY(GPMC_A8, "h1", NULL),
+ _OMAP2430_BALLENTRY(GPMC_A9, "c8", NULL),
+ _OMAP2430_BALLENTRY(GPMC_CLK, "n1", "l1"),
+ _OMAP2430_BALLENTRY(GPMC_D10, "d1", "n1"),
+ _OMAP2430_BALLENTRY(GPMC_D11, "d2", "p2"),
+ _OMAP2430_BALLENTRY(GPMC_D12, "e1", "p1"),
+ _OMAP2430_BALLENTRY(GPMC_D13, "e3", "m1"),
+ _OMAP2430_BALLENTRY(GPMC_D14, "c7", "j2"),
+ _OMAP2430_BALLENTRY(GPMC_D15, "f3", "k2"),
+ _OMAP2430_BALLENTRY(GPMC_D8, "e2", "r1"),
+ _OMAP2430_BALLENTRY(GPMC_D9, "ab1", "t1"),
+ _OMAP2430_BALLENTRY(GPMC_NCS1, "ac1", "w1"),
+ _OMAP2430_BALLENTRY(GPMC_NCS2, "c6", NULL),
+ _OMAP2430_BALLENTRY(GPMC_NCS3, "b9", NULL),
+ _OMAP2430_BALLENTRY(GPMC_NCS4, "b4", NULL),
+ _OMAP2430_BALLENTRY(GPMC_NCS5, "a4", NULL),
+ _OMAP2430_BALLENTRY(GPMC_NCS6, "f1", NULL),
+ _OMAP2430_BALLENTRY(GPMC_NCS7, "a7", NULL),
+ _OMAP2430_BALLENTRY(GPMC_WAIT1, "j1", "y8"),
+ _OMAP2430_BALLENTRY(GPMC_WAIT2, "b7", NULL),
+ _OMAP2430_BALLENTRY(GPMC_WAIT3, "g14", NULL),
+ _OMAP2430_BALLENTRY(HDQ_SIO, "h20", NULL),
+ _OMAP2430_BALLENTRY(I2C1_SCL, "y17", NULL),
+ _OMAP2430_BALLENTRY(I2C1_SDA, "ac19", NULL),
+ _OMAP2430_BALLENTRY(I2C2_SCL, "n7", NULL),
+ _OMAP2430_BALLENTRY(I2C2_SDA, "m4", NULL),
+ _OMAP2430_BALLENTRY(JTAG_EMU0, "e25", NULL),
+ _OMAP2430_BALLENTRY(JTAG_EMU1, "e24", NULL),
+ _OMAP2430_BALLENTRY(MCBSP1_CLKR, "ab2", NULL),
+ _OMAP2430_BALLENTRY(MCBSP1_CLKX, "y9", NULL),
+ _OMAP2430_BALLENTRY(MCBSP1_DR, "af3", NULL),
+ _OMAP2430_BALLENTRY(MCBSP1_DX, "aa1", NULL),
+ _OMAP2430_BALLENTRY(MCBSP1_FSR, "ad5", NULL),
+ _OMAP2430_BALLENTRY(MCBSP1_FSX, "ab3", NULL),
+ _OMAP2430_BALLENTRY(MCBSP2_CLKX, "j26", NULL),
+ _OMAP2430_BALLENTRY(MCBSP2_DR, "k26", NULL),
+ _OMAP2430_BALLENTRY(MCBSP3_CLKX, "ac9", NULL),
+ _OMAP2430_BALLENTRY(MCBSP3_DR, "ae2", NULL),
+ _OMAP2430_BALLENTRY(MCBSP3_DX, "af4", NULL),
+ _OMAP2430_BALLENTRY(MCBSP3_FSX, "ae4", NULL),
+ _OMAP2430_BALLENTRY(MCBSP_CLKS, "ad6", NULL),
+ _OMAP2430_BALLENTRY(SDMMC1_CLKO, "n23", NULL),
+ _OMAP2430_BALLENTRY(SDMMC1_CMD, "l23", NULL),
+ _OMAP2430_BALLENTRY(SDMMC1_DAT0, "m24", NULL),
+ _OMAP2430_BALLENTRY(SDMMC1_DAT1, "p23", NULL),
+ _OMAP2430_BALLENTRY(SDMMC1_DAT2, "t20", NULL),
+ _OMAP2430_BALLENTRY(SDMMC1_DAT3, "r20", NULL),
+ _OMAP2430_BALLENTRY(SDMMC2_CLKO, "v26", NULL),
+ _OMAP2430_BALLENTRY(SDMMC2_CMD, "w20", NULL),
+ _OMAP2430_BALLENTRY(SDMMC2_DAT0, "v23", NULL),
+ _OMAP2430_BALLENTRY(SDMMC2_DAT1, "y24", NULL),
+ _OMAP2430_BALLENTRY(SDMMC2_DAT2, "v25", NULL),
+ _OMAP2430_BALLENTRY(SDMMC2_DAT3, "v24", NULL),
+ _OMAP2430_BALLENTRY(SDRC_A12, "w26", "r21"),
+ _OMAP2430_BALLENTRY(SDRC_A13, "af20", "aa15"),
+ _OMAP2430_BALLENTRY(SDRC_A14, "af16", "y12"),
+ _OMAP2430_BALLENTRY(SDRC_CKE1, "af15", "y13"),
+ _OMAP2430_BALLENTRY(SDRC_NCS1, "aa25", "t20"),
+ _OMAP2430_BALLENTRY(SPI1_CLK, "y18", NULL),
+ _OMAP2430_BALLENTRY(SPI1_CS0, "u1", NULL),
+ _OMAP2430_BALLENTRY(SPI1_CS1, "af19", NULL),
+ _OMAP2430_BALLENTRY(SPI1_CS2, "ae19", NULL),
+ _OMAP2430_BALLENTRY(SPI1_CS3, "h24", NULL),
+ _OMAP2430_BALLENTRY(SPI1_SIMO, "ad15", NULL),
+ _OMAP2430_BALLENTRY(SPI1_SOMI, "ae17", NULL),
+ _OMAP2430_BALLENTRY(SPI2_CLK, "y20", NULL),
+ _OMAP2430_BALLENTRY(SPI2_CS0, "y19", NULL),
+ _OMAP2430_BALLENTRY(SPI2_SIMO, "ac20", NULL),
+ _OMAP2430_BALLENTRY(SPI2_SOMI, "ad19", NULL),
+ _OMAP2430_BALLENTRY(SSI1_DAT_RX, "aa26", NULL),
+ _OMAP2430_BALLENTRY(SSI1_DAT_TX, "ad24", NULL),
+ _OMAP2430_BALLENTRY(SSI1_FLAG_RX, "ad23", NULL),
+ _OMAP2430_BALLENTRY(SSI1_FLAG_TX, "ab24", NULL),
+ _OMAP2430_BALLENTRY(SSI1_RDY_RX, "ab25", NULL),
+ _OMAP2430_BALLENTRY(SSI1_RDY_TX, "y25", NULL),
+ _OMAP2430_BALLENTRY(SSI1_WAKE, "ac25", NULL),
+ _OMAP2430_BALLENTRY(SYS_CLKOUT, "r25", NULL),
+ _OMAP2430_BALLENTRY(SYS_DRM_MSECURE, "ae3", NULL),
+ _OMAP2430_BALLENTRY(SYS_NIRQ0, "w25", NULL),
+ _OMAP2430_BALLENTRY(SYS_NIRQ1, "ad21", NULL),
+ _OMAP2430_BALLENTRY(UART1_CTS, "p24", NULL),
+ _OMAP2430_BALLENTRY(UART1_RTS, "p25", NULL),
+ _OMAP2430_BALLENTRY(UART1_RX, "n24", NULL),
+ _OMAP2430_BALLENTRY(UART1_TX, "r24", NULL),
+ _OMAP2430_BALLENTRY(UART2_CTS, "u25", NULL),
+ _OMAP2430_BALLENTRY(UART2_RTS, "t23", NULL),
+ _OMAP2430_BALLENTRY(UART2_RX, "t24", NULL),
+ _OMAP2430_BALLENTRY(UART2_TX, "u20", NULL),
+ _OMAP2430_BALLENTRY(UART3_CTS_RCTX, "m2", NULL),
+ _OMAP2430_BALLENTRY(UART3_RTS_SD, "k2", NULL),
+ _OMAP2430_BALLENTRY(UART3_RX_IRRX, "l3", NULL),
+ _OMAP2430_BALLENTRY(UART3_TX_IRTX, "l2", NULL),
+ _OMAP2430_BALLENTRY(USB0HS_CLK, "ae8", NULL),
+ _OMAP2430_BALLENTRY(USB0HS_DATA0, "ad4", NULL),
+ _OMAP2430_BALLENTRY(USB0HS_DATA1, "ae6", NULL),
+ _OMAP2430_BALLENTRY(USB0HS_DATA2, "af9", NULL),
+ _OMAP2430_BALLENTRY(USB0HS_DATA3, "ad9", NULL),
+ _OMAP2430_BALLENTRY(USB0HS_DATA4, "y11", NULL),
+ _OMAP2430_BALLENTRY(USB0HS_DATA5, "ad7", NULL),
+ _OMAP2430_BALLENTRY(USB0HS_DATA6, "ae7", NULL),
+ _OMAP2430_BALLENTRY(USB0HS_DATA7, "ac7", NULL),
+ _OMAP2430_BALLENTRY(USB0HS_DIR, "ad8", NULL),
+ _OMAP2430_BALLENTRY(USB0HS_NXT, "ae9", NULL),
+ _OMAP2430_BALLENTRY(USB0HS_STP, "ae5", NULL),
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap2430_pop_ball NULL
+#endif
+
+int __init omap2430_mux_init(struct omap_board_mux *board_subset, int flags)
+{
+ struct omap_ball *package_balls = NULL;
+
+ switch (flags & OMAP_PACKAGE_MASK) {
+ case OMAP_PACKAGE_ZAC:
+ package_balls = omap2430_pop_ball;
+ break;
+ default:
+ pr_warning("mux: No ball data available for omap2420 package\n");
+ }
+
+ return omap_mux_init(OMAP2430_CONTROL_PADCONF_MUX_PBASE,
+ OMAP2430_CONTROL_PADCONF_MUX_SIZE,
+ omap2430_muxmodes, NULL, board_subset,
+ package_balls);
+}
diff --git a/arch/arm/mach-omap2/mux2430.h b/arch/arm/mach-omap2/mux2430.h
new file mode 100644
index 0000000..adbea0d
--- /dev/null
+++ b/arch/arm/mach-omap2/mux2430.h
@@ -0,0 +1,370 @@
+/*
+ * Copyright (C) 2009 Nokia
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define OMAP2430_CONTROL_PADCONF_MUX_PBASE 0x49002030LU
+
+#define OMAP2430_MUX(mode0, mux_value) \
+{ \
+ .reg_offset = (OMAP2430_CONTROL_PADCONF_##mode0##_OFFSET), \
+ .value = (mux_value), \
+}
+
+/*
+ * OMAP2430 CONTROL_PADCONF* register offsets for pin-muxing
+ *
+ * Extracted from the TRM. Add 0x49002030 to these values to get the
+ * absolute addresses. The name in the macro is the mode-0 name of
+ * the pin. NOTE: These registers are 8-bits wide.
+ *
+ * Note that these defines use SDMMC instead of MMC for compability
+ * with signal names used in 3630.
+ */
+#define OMAP2430_CONTROL_PADCONF_GPMC_CLK_OFFSET 0x000
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS0_OFFSET 0x001
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS1_OFFSET 0x002
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS2_OFFSET 0x003
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS3_OFFSET 0x004
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS4_OFFSET 0x005
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS5_OFFSET 0x006
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS6_OFFSET 0x007
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS7_OFFSET 0x008
+#define OMAP2430_CONTROL_PADCONF_GPMC_NADV_ALE_OFFSET 0x009
+#define OMAP2430_CONTROL_PADCONF_GPMC_NOE_NRE_OFFSET 0x00a
+#define OMAP2430_CONTROL_PADCONF_GPMC_NWE_OFFSET 0x00b
+#define OMAP2430_CONTROL_PADCONF_GPMC_NBE0_CLE_OFFSET 0x00c
+#define OMAP2430_CONTROL_PADCONF_GPMC_NBE1_OFFSET 0x00d
+#define OMAP2430_CONTROL_PADCONF_GPMC_NWP_OFFSET 0x00e
+#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT0_OFFSET 0x00f
+#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT1_OFFSET 0x010
+#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT2_OFFSET 0x011
+#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT3_OFFSET 0x012
+#define OMAP2430_CONTROL_PADCONF_SDRC_CLK_OFFSET 0x013
+#define OMAP2430_CONTROL_PADCONF_SDRC_NCLK_OFFSET 0x014
+#define OMAP2430_CONTROL_PADCONF_SDRC_NCS0_OFFSET 0x015
+#define OMAP2430_CONTROL_PADCONF_SDRC_NCS1_OFFSET 0x016
+#define OMAP2430_CONTROL_PADCONF_SDRC_CKE0_OFFSET 0x017
+#define OMAP2430_CONTROL_PADCONF_SDRC_CKE1_OFFSET 0x018
+#define OMAP2430_CONTROL_PADCONF_SDRC_NRAS_OFFSET 0x019
+#define OMAP2430_CONTROL_PADCONF_SDRC_NCAS_OFFSET 0x01a
+#define OMAP2430_CONTROL_PADCONF_SDRC_NWE_OFFSET 0x01b
+#define OMAP2430_CONTROL_PADCONF_SDRC_DM0_OFFSET 0x01c
+#define OMAP2430_CONTROL_PADCONF_SDRC_DM1_OFFSET 0x01d
+#define OMAP2430_CONTROL_PADCONF_SDRC_DM2_OFFSET 0x01e
+#define OMAP2430_CONTROL_PADCONF_SDRC_DM3_OFFSET 0x01f
+#define OMAP2430_CONTROL_PADCONF_SDRC_DQS0_OFFSET 0x020
+#define OMAP2430_CONTROL_PADCONF_SDRC_DQS1_OFFSET 0x021
+#define OMAP2430_CONTROL_PADCONF_SDRC_DQS2_OFFSET 0x022
+#define OMAP2430_CONTROL_PADCONF_SDRC_DQS3_OFFSET 0x023
+#define OMAP2430_CONTROL_PADCONF_SDRC_A14_OFFSET 0x024
+#define OMAP2430_CONTROL_PADCONF_SDRC_A13_OFFSET 0x025
+#define OMAP2430_CONTROL_PADCONF_SDRC_A12_OFFSET 0x026
+#define OMAP2430_CONTROL_PADCONF_SDRC_BA1_OFFSET 0x027
+#define OMAP2430_CONTROL_PADCONF_SDRC_BA0_OFFSET 0x028
+#define OMAP2430_CONTROL_PADCONF_SDRC_A11_OFFSET 0x029
+#define OMAP2430_CONTROL_PADCONF_SDRC_A10_OFFSET 0x02a
+#define OMAP2430_CONTROL_PADCONF_SDRC_A9_OFFSET 0x02b
+#define OMAP2430_CONTROL_PADCONF_SDRC_A8_OFFSET 0x02c
+#define OMAP2430_CONTROL_PADCONF_SDRC_A7_OFFSET 0x02d
+#define OMAP2430_CONTROL_PADCONF_SDRC_A6_OFFSET 0x02e
+#define OMAP2430_CONTROL_PADCONF_SDRC_A5_OFFSET 0x02f
+#define OMAP2430_CONTROL_PADCONF_SDRC_A4_OFFSET 0x030
+#define OMAP2430_CONTROL_PADCONF_SDRC_A3_OFFSET 0x031
+#define OMAP2430_CONTROL_PADCONF_SDRC_A2_OFFSET 0x032
+#define OMAP2430_CONTROL_PADCONF_SDRC_A1_OFFSET 0x033
+#define OMAP2430_CONTROL_PADCONF_SDRC_A0_OFFSET 0x034
+#define OMAP2430_CONTROL_PADCONF_SDRC_D31_OFFSET 0x035
+#define OMAP2430_CONTROL_PADCONF_SDRC_D30_OFFSET 0x036
+#define OMAP2430_CONTROL_PADCONF_SDRC_D29_OFFSET 0x037
+#define OMAP2430_CONTROL_PADCONF_SDRC_D28_OFFSET 0x038
+#define OMAP2430_CONTROL_PADCONF_SDRC_D27_OFFSET 0x039
+#define OMAP2430_CONTROL_PADCONF_SDRC_D26_OFFSET 0x03a
+#define OMAP2430_CONTROL_PADCONF_SDRC_D25_OFFSET 0x03b
+#define OMAP2430_CONTROL_PADCONF_SDRC_D24_OFFSET 0x03c
+#define OMAP2430_CONTROL_PADCONF_SDRC_D23_OFFSET 0x03d
+#define OMAP2430_CONTROL_PADCONF_SDRC_D22_OFFSET 0x03e
+#define OMAP2430_CONTROL_PADCONF_SDRC_D21_OFFSET 0x03f
+#define OMAP2430_CONTROL_PADCONF_SDRC_D20_OFFSET 0x040
+#define OMAP2430_CONTROL_PADCONF_SDRC_D19_OFFSET 0x041
+#define OMAP2430_CONTROL_PADCONF_SDRC_D18_OFFSET 0x042
+#define OMAP2430_CONTROL_PADCONF_SDRC_D17_OFFSET 0x043
+#define OMAP2430_CONTROL_PADCONF_SDRC_D16_OFFSET 0x044
+#define OMAP2430_CONTROL_PADCONF_SDRC_D15_OFFSET 0x045
+#define OMAP2430_CONTROL_PADCONF_SDRC_D14_OFFSET 0x046
+#define OMAP2430_CONTROL_PADCONF_SDRC_D13_OFFSET 0x047
+#define OMAP2430_CONTROL_PADCONF_SDRC_D12_OFFSET 0x048
+#define OMAP2430_CONTROL_PADCONF_SDRC_D11_OFFSET 0x049
+#define OMAP2430_CONTROL_PADCONF_SDRC_D10_OFFSET 0x04a
+#define OMAP2430_CONTROL_PADCONF_SDRC_D9_OFFSET 0x04b
+#define OMAP2430_CONTROL_PADCONF_SDRC_D8_OFFSET 0x04c
+#define OMAP2430_CONTROL_PADCONF_SDRC_D7_OFFSET 0x04d
+#define OMAP2430_CONTROL_PADCONF_SDRC_D6_OFFSET 0x04e
+#define OMAP2430_CONTROL_PADCONF_SDRC_D5_OFFSET 0x04f
+#define OMAP2430_CONTROL_PADCONF_SDRC_D4_OFFSET 0x050
+#define OMAP2430_CONTROL_PADCONF_SDRC_D3_OFFSET 0x051
+#define OMAP2430_CONTROL_PADCONF_SDRC_D2_OFFSET 0x052
+#define OMAP2430_CONTROL_PADCONF_SDRC_D1_OFFSET 0x053
+#define OMAP2430_CONTROL_PADCONF_SDRC_D0_OFFSET 0x054
+#define OMAP2430_CONTROL_PADCONF_GPMC_A10_OFFSET 0x055
+#define OMAP2430_CONTROL_PADCONF_GPMC_A9_OFFSET 0x056
+#define OMAP2430_CONTROL_PADCONF_GPMC_A8_OFFSET 0x057
+#define OMAP2430_CONTROL_PADCONF_GPMC_A7_OFFSET 0x058
+#define OMAP2430_CONTROL_PADCONF_GPMC_A6_OFFSET 0x059
+#define OMAP2430_CONTROL_PADCONF_GPMC_A5_OFFSET 0x05a
+#define OMAP2430_CONTROL_PADCONF_GPMC_A4_OFFSET 0x05b
+#define OMAP2430_CONTROL_PADCONF_GPMC_A3_OFFSET 0x05c
+#define OMAP2430_CONTROL_PADCONF_GPMC_A2_OFFSET 0x05d
+#define OMAP2430_CONTROL_PADCONF_GPMC_A1_OFFSET 0x05e
+#define OMAP2430_CONTROL_PADCONF_GPMC_D15_OFFSET 0x05f
+#define OMAP2430_CONTROL_PADCONF_GPMC_D14_OFFSET 0x060
+#define OMAP2430_CONTROL_PADCONF_GPMC_D13_OFFSET 0x061
+#define OMAP2430_CONTROL_PADCONF_GPMC_D12_OFFSET 0x062
+#define OMAP2430_CONTROL_PADCONF_GPMC_D11_OFFSET 0x063
+#define OMAP2430_CONTROL_PADCONF_GPMC_D10_OFFSET 0x064
+#define OMAP2430_CONTROL_PADCONF_GPMC_D9_OFFSET 0x065
+#define OMAP2430_CONTROL_PADCONF_GPMC_D8_OFFSET 0x066
+#define OMAP2430_CONTROL_PADCONF_GPMC_D7_OFFSET 0x067
+#define OMAP2430_CONTROL_PADCONF_GPMC_D6_OFFSET 0x068
+#define OMAP2430_CONTROL_PADCONF_GPMC_D5_OFFSET 0x069
+#define OMAP2430_CONTROL_PADCONF_GPMC_D4_OFFSET 0x06a
+#define OMAP2430_CONTROL_PADCONF_GPMC_D3_OFFSET 0x06b
+#define OMAP2430_CONTROL_PADCONF_GPMC_D2_OFFSET 0x06c
+#define OMAP2430_CONTROL_PADCONF_GPMC_D1_OFFSET 0x06d
+#define OMAP2430_CONTROL_PADCONF_GPMC_D0_OFFSET 0x06e
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA0_OFFSET 0x06f
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA1_OFFSET 0x070
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA2_OFFSET 0x071
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA3_OFFSET 0x072
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA4_OFFSET 0x073
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA5_OFFSET 0x074
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA6_OFFSET 0x075
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA7_OFFSET 0x076
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA8_OFFSET 0x077
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA9_OFFSET 0x078
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA10_OFFSET 0x079
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA11_OFFSET 0x07a
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA12_OFFSET 0x07b
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA13_OFFSET 0x07c
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA14_OFFSET 0x07d
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA15_OFFSET 0x07e
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA16_OFFSET 0x07f
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA17_OFFSET 0x080
+#define OMAP2430_CONTROL_PADCONF_UART1_CTS_OFFSET 0x081
+#define OMAP2430_CONTROL_PADCONF_UART1_RTS_OFFSET 0x082
+#define OMAP2430_CONTROL_PADCONF_UART1_TX_OFFSET 0x083
+#define OMAP2430_CONTROL_PADCONF_UART1_RX_OFFSET 0x084
+#define OMAP2430_CONTROL_PADCONF_MCBSP2_DR_OFFSET 0x085
+#define OMAP2430_CONTROL_PADCONF_MCBSP2_CLKX_OFFSET 0x086
+#define OMAP2430_CONTROL_PADCONF_DSS_PCLK_OFFSET 0x087
+#define OMAP2430_CONTROL_PADCONF_DSS_VSYNC_OFFSET 0x088
+#define OMAP2430_CONTROL_PADCONF_DSS_HSYNC_OFFSET 0x089
+#define OMAP2430_CONTROL_PADCONF_DSS_ACBIAS_OFFSET 0x08a
+#define OMAP2430_CONTROL_PADCONF_SYS_NRESPWRON_OFFSET 0x08b
+#define OMAP2430_CONTROL_PADCONF_SYS_NRESWARM_OFFSET 0x08c
+#define OMAP2430_CONTROL_PADCONF_SYS_NIRQ0_OFFSET 0x08d
+#define OMAP2430_CONTROL_PADCONF_SYS_NIRQ1_OFFSET 0x08e
+#define OMAP2430_CONTROL_PADCONF_SYS_VMODE_OFFSET 0x08f
+#define OMAP2430_CONTROL_PADCONF_GPIO_128_OFFSET 0x090
+#define OMAP2430_CONTROL_PADCONF_GPIO_129_OFFSET 0x091
+#define OMAP2430_CONTROL_PADCONF_GPIO_130_OFFSET 0x092
+#define OMAP2430_CONTROL_PADCONF_GPIO_131_OFFSET 0x093
+#define OMAP2430_CONTROL_PADCONF_SYS_32K_OFFSET 0x094
+#define OMAP2430_CONTROL_PADCONF_SYS_XTALIN_OFFSET 0x095
+#define OMAP2430_CONTROL_PADCONF_SYS_XTALOUT_OFFSET 0x096
+#define OMAP2430_CONTROL_PADCONF_GPIO_132_OFFSET 0x097
+#define OMAP2430_CONTROL_PADCONF_SYS_CLKREQ_OFFSET 0x098
+#define OMAP2430_CONTROL_PADCONF_SYS_CLKOUT_OFFSET 0x099
+#define OMAP2430_CONTROL_PADCONF_GPIO_151_OFFSET 0x09a
+#define OMAP2430_CONTROL_PADCONF_GPIO_133_OFFSET 0x09b
+#define OMAP2430_CONTROL_PADCONF_JTAG_EMU1_OFFSET 0x09c
+#define OMAP2430_CONTROL_PADCONF_JTAG_EMU0_OFFSET 0x09d
+#define OMAP2430_CONTROL_PADCONF_JTAG_NTRST_OFFSET 0x09e
+#define OMAP2430_CONTROL_PADCONF_JTAG_TCK_OFFSET 0x09f
+#define OMAP2430_CONTROL_PADCONF_JTAG_RTCK_OFFSET 0x0a0
+#define OMAP2430_CONTROL_PADCONF_JTAG_TMS_OFFSET 0x0a1
+#define OMAP2430_CONTROL_PADCONF_JTAG_TDI_OFFSET 0x0a2
+#define OMAP2430_CONTROL_PADCONF_JTAG_TDO_OFFSET 0x0a3
+#define OMAP2430_CONTROL_PADCONF_CAM_D9_OFFSET 0x0a4
+#define OMAP2430_CONTROL_PADCONF_CAM_D8_OFFSET 0x0a5
+#define OMAP2430_CONTROL_PADCONF_CAM_D7_OFFSET 0x0a6
+#define OMAP2430_CONTROL_PADCONF_CAM_D6_OFFSET 0x0a7
+#define OMAP2430_CONTROL_PADCONF_CAM_D5_OFFSET 0x0a8
+#define OMAP2430_CONTROL_PADCONF_CAM_D4_OFFSET 0x0a9
+#define OMAP2430_CONTROL_PADCONF_CAM_D3_OFFSET 0x0aa
+#define OMAP2430_CONTROL_PADCONF_CAM_D2_OFFSET 0x0ab
+#define OMAP2430_CONTROL_PADCONF_CAM_D1_OFFSET 0x0ac
+#define OMAP2430_CONTROL_PADCONF_CAM_D0_OFFSET 0x0ad
+#define OMAP2430_CONTROL_PADCONF_CAM_HS_OFFSET 0x0ae
+#define OMAP2430_CONTROL_PADCONF_CAM_VS_OFFSET 0x0af
+#define OMAP2430_CONTROL_PADCONF_CAM_LCLK_OFFSET 0x0b0
+#define OMAP2430_CONTROL_PADCONF_CAM_XCLK_OFFSET 0x0b1
+#define OMAP2430_CONTROL_PADCONF_CAM_D11_OFFSET 0x0b2
+#define OMAP2430_CONTROL_PADCONF_CAM_D10_OFFSET 0x0b3
+#define OMAP2430_CONTROL_PADCONF_GPIO_134_OFFSET 0x0b4
+#define OMAP2430_CONTROL_PADCONF_GPIO_135_OFFSET 0x0b5
+#define OMAP2430_CONTROL_PADCONF_GPIO_136_OFFSET 0x0b6
+#define OMAP2430_CONTROL_PADCONF_GPIO_137_OFFSET 0x0b7
+#define OMAP2430_CONTROL_PADCONF_GPIO_138_OFFSET 0x0b8
+#define OMAP2430_CONTROL_PADCONF_GPIO_139_OFFSET 0x0b9
+#define OMAP2430_CONTROL_PADCONF_GPIO_140_OFFSET 0x0ba
+#define OMAP2430_CONTROL_PADCONF_GPIO_141_OFFSET 0x0bb
+#define OMAP2430_CONTROL_PADCONF_GPIO_142_OFFSET 0x0bc
+#define OMAP2430_CONTROL_PADCONF_GPIO_154_OFFSET 0x0bd
+#define OMAP2430_CONTROL_PADCONF_GPIO_148_OFFSET 0x0be
+#define OMAP2430_CONTROL_PADCONF_GPIO_149_OFFSET 0x0bf
+#define OMAP2430_CONTROL_PADCONF_GPIO_150_OFFSET 0x0c0
+#define OMAP2430_CONTROL_PADCONF_GPIO_152_OFFSET 0x0c1
+#define OMAP2430_CONTROL_PADCONF_GPIO_153_OFFSET 0x0c2
+#define OMAP2430_CONTROL_PADCONF_SDMMC1_CLKO_OFFSET 0x0c3
+#define OMAP2430_CONTROL_PADCONF_SDMMC1_CMD_OFFSET 0x0c4
+#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT0_OFFSET 0x0c5
+#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT1_OFFSET 0x0c6
+#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT2_OFFSET 0x0c7
+#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT3_OFFSET 0x0c8
+#define OMAP2430_CONTROL_PADCONF_SDMMC2_CLKO_OFFSET 0x0c9
+#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT3_OFFSET 0x0ca
+#define OMAP2430_CONTROL_PADCONF_SDMMC2_CMD_OFFSET 0x0cb
+#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT0_OFFSET 0x0cc
+#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT2_OFFSET 0x0cd
+#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT1_OFFSET 0x0ce
+#define OMAP2430_CONTROL_PADCONF_UART2_CTS_OFFSET 0x0cf
+#define OMAP2430_CONTROL_PADCONF_UART2_RTS_OFFSET 0x0d0
+#define OMAP2430_CONTROL_PADCONF_UART2_TX_OFFSET 0x0d1
+#define OMAP2430_CONTROL_PADCONF_UART2_RX_OFFSET 0x0d2
+#define OMAP2430_CONTROL_PADCONF_MCBSP3_CLKX_OFFSET 0x0d3
+#define OMAP2430_CONTROL_PADCONF_MCBSP3_FSX_OFFSET 0x0d4
+#define OMAP2430_CONTROL_PADCONF_MCBSP3_DR_OFFSET 0x0d5
+#define OMAP2430_CONTROL_PADCONF_MCBSP3_DX_OFFSET 0x0d6
+#define OMAP2430_CONTROL_PADCONF_SSI1_DAT_TX_OFFSET 0x0d7
+#define OMAP2430_CONTROL_PADCONF_SSI1_FLAG_TX_OFFSET 0x0d8
+#define OMAP2430_CONTROL_PADCONF_SSI1_RDY_TX_OFFSET 0x0d9
+#define OMAP2430_CONTROL_PADCONF_SSI1_DAT_RX_OFFSET 0x0da
+#define OMAP2430_CONTROL_PADCONF_GPIO_63_OFFSET 0x0db
+#define OMAP2430_CONTROL_PADCONF_SSI1_FLAG_RX_OFFSET 0x0dc
+#define OMAP2430_CONTROL_PADCONF_SSI1_RDY_RX_OFFSET 0x0dd
+#define OMAP2430_CONTROL_PADCONF_SSI1_WAKE_OFFSET 0x0de
+#define OMAP2430_CONTROL_PADCONF_SPI1_CLK_OFFSET 0x0df
+#define OMAP2430_CONTROL_PADCONF_SPI1_SIMO_OFFSET 0x0e0
+#define OMAP2430_CONTROL_PADCONF_SPI1_SOMI_OFFSET 0x0e1
+#define OMAP2430_CONTROL_PADCONF_SPI1_CS0_OFFSET 0x0e2
+#define OMAP2430_CONTROL_PADCONF_SPI1_CS1_OFFSET 0x0e3
+#define OMAP2430_CONTROL_PADCONF_SPI1_CS2_OFFSET 0x0e4
+#define OMAP2430_CONTROL_PADCONF_SPI1_CS3_OFFSET 0x0e5
+#define OMAP2430_CONTROL_PADCONF_SPI2_CLK_OFFSET 0x0e6
+#define OMAP2430_CONTROL_PADCONF_SPI2_SIMO_OFFSET 0x0e7
+#define OMAP2430_CONTROL_PADCONF_SPI2_SOMI_OFFSET 0x0e8
+#define OMAP2430_CONTROL_PADCONF_SPI2_CS0_OFFSET 0x0e9
+#define OMAP2430_CONTROL_PADCONF_MCBSP1_CLKR_OFFSET 0x0ea
+#define OMAP2430_CONTROL_PADCONF_MCBSP1_FSR_OFFSET 0x0eb
+#define OMAP2430_CONTROL_PADCONF_MCBSP1_DX_OFFSET 0x0ec
+#define OMAP2430_CONTROL_PADCONF_MCBSP1_DR_OFFSET 0x0ed
+#define OMAP2430_CONTROL_PADCONF_MCBSP_CLKS_OFFSET 0x0ee
+#define OMAP2430_CONTROL_PADCONF_MCBSP1_FSX_OFFSET 0x0ef
+#define OMAP2430_CONTROL_PADCONF_MCBSP1_CLKX_OFFSET 0x0f0
+#define OMAP2430_CONTROL_PADCONF_I2C1_SCL_OFFSET 0x0f1
+#define OMAP2430_CONTROL_PADCONF_I2C1_SDA_OFFSET 0x0f2
+#define OMAP2430_CONTROL_PADCONF_I2C2_SCL_OFFSET 0x0f3
+#define OMAP2430_CONTROL_PADCONF_I2C2_SDA_OFFSET 0x0f4
+#define OMAP2430_CONTROL_PADCONF_HDQ_SIO_OFFSET 0x0f5
+#define OMAP2430_CONTROL_PADCONF_UART3_CTS_RCTX_OFFSET 0x0f6
+#define OMAP2430_CONTROL_PADCONF_UART3_RTS_SD_OFFSET 0x0f7
+#define OMAP2430_CONTROL_PADCONF_UART3_TX_IRTX_OFFSET 0x0f8
+#define OMAP2430_CONTROL_PADCONF_UART3_RX_IRRX_OFFSET 0x0f9
+#define OMAP2430_CONTROL_PADCONF_GPIO_7_OFFSET 0x0fa
+#define OMAP2430_CONTROL_PADCONF_GPIO_78_OFFSET 0x0fb
+#define OMAP2430_CONTROL_PADCONF_GPIO_79_OFFSET 0x0fc
+#define OMAP2430_CONTROL_PADCONF_GPIO_80_OFFSET 0x0fd
+#define OMAP2430_CONTROL_PADCONF_GPIO_113_OFFSET 0x0fe
+#define OMAP2430_CONTROL_PADCONF_GPIO_114_OFFSET 0x0ff
+#define OMAP2430_CONTROL_PADCONF_GPIO_115_OFFSET 0x100
+#define OMAP2430_CONTROL_PADCONF_GPIO_116_OFFSET 0x101
+#define OMAP2430_CONTROL_PADCONF_SYS_DRM_MSECURE_OFFSET 0x102
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA3_OFFSET 0x103
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA4_OFFSET 0x104
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA5_OFFSET 0x105
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA6_OFFSET 0x106
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA2_OFFSET 0x107
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA0_OFFSET 0x108
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA1_OFFSET 0x109
+#define OMAP2430_CONTROL_PADCONF_USB0HS_CLK_OFFSET 0x10a
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DIR_OFFSET 0x10b
+#define OMAP2430_CONTROL_PADCONF_USB0HS_STP_OFFSET 0x10c
+#define OMAP2430_CONTROL_PADCONF_USB0HS_NXT_OFFSET 0x10d
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA7_OFFSET 0x10e
+#define OMAP2430_CONTROL_PADCONF_TV_OUT_OFFSET 0x10f
+#define OMAP2430_CONTROL_PADCONF_TV_VREF_OFFSET 0x110
+#define OMAP2430_CONTROL_PADCONF_TV_RSET_OFFSET 0x111
+#define OMAP2430_CONTROL_PADCONF_TV_VFB_OFFSET 0x112
+#define OMAP2430_CONTROL_PADCONF_TV_DACOUT_OFFSET 0x113
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD0_OFFSET 0x114
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD1_OFFSET 0x115
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD2_OFFSET 0x116
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD3_OFFSET 0x117
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD4_OFFSET 0x118
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD5_OFFSET 0x119
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD6_OFFSET 0x11a
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD7_OFFSET 0x11b
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD8_OFFSET 0x11c
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD9_OFFSET 0x11d
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD10_OFFSET 0x11e
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD11_OFFSET 0x11f
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD12_OFFSET 0x120
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD13_OFFSET 0x121
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD14_OFFSET 0x122
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD15_OFFSET 0x123
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD16_OFFSET 0x124
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD17_OFFSET 0x125
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD18_OFFSET 0x126
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD19_OFFSET 0x127
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD20_OFFSET 0x128
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD21_OFFSET 0x129
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD22_OFFSET 0x12a
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD23_OFFSET 0x12b
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD24_OFFSET 0x12c
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD25_OFFSET 0x12d
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD26_OFFSET 0x12e
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD27_OFFSET 0x12f
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD28_OFFSET 0x130
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD29_OFFSET 0x131
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD30_OFFSET 0x132
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD31_OFFSET 0x133
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD32_OFFSET 0x134
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD33_OFFSET 0x135
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD34_OFFSET 0x136
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD35_OFFSET 0x137
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD36_OFFSET 0x138
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD37_OFFSET 0x139
+#define OMAP2430_CONTROL_PADCONF_AD2DMWRITE_OFFSET 0x13a
+#define OMAP2430_CONTROL_PADCONF_D2DCLK26MI_OFFSET 0x13b
+#define OMAP2430_CONTROL_PADCONF_D2DNRESPWRON1_OFFSET 0x13c
+#define OMAP2430_CONTROL_PADCONF_D2DNRESWARM_OFFSET 0x13d
+#define OMAP2430_CONTROL_PADCONF_D2DARM9NIRQ_OFFSET 0x13e
+#define OMAP2430_CONTROL_PADCONF_D2DUMA2P6FIQ_OFFSET 0x13f
+#define OMAP2430_CONTROL_PADCONF_D2DSPINT_OFFSET 0x140
+#define OMAP2430_CONTROL_PADCONF_D2DFRINT_OFFSET 0x141
+#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ0_OFFSET 0x142
+#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ1_OFFSET 0x143
+#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ2_OFFSET 0x144
+#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ3_OFFSET 0x145
+#define OMAP2430_CONTROL_PADCONF_D2DN3GTRST_OFFSET 0x146
+#define OMAP2430_CONTROL_PADCONF_D2DN3GTDI_OFFSET 0x147
+#define OMAP2430_CONTROL_PADCONF_D2DN3GTDO_OFFSET 0x148
+#define OMAP2430_CONTROL_PADCONF_D2DN3GTMS_OFFSET 0x149
+#define OMAP2430_CONTROL_PADCONF_D2DN3GTCK_OFFSET 0x14a
+#define OMAP2430_CONTROL_PADCONF_D2DN3GRTCK_OFFSET 0x14b
+#define OMAP2430_CONTROL_PADCONF_D2DMSTDBY_OFFSET 0x14c
+#define OMAP2430_CONTROL_PADCONF_AD2DSREAD_OFFSET 0x14d
+#define OMAP2430_CONTROL_PADCONF_D2DSWAKEUP_OFFSET 0x14e
+#define OMAP2430_CONTROL_PADCONF_D2DIDLEREQ_OFFSET 0x14f
+#define OMAP2430_CONTROL_PADCONF_D2DIDLEACK_OFFSET 0x150
+#define OMAP2430_CONTROL_PADCONF_D2DSPARE0_OFFSET 0x151
+#define OMAP2430_CONTROL_PADCONF_AD2DSWRITE_OFFSET 0x152
+#define OMAP2430_CONTROL_PADCONF_AD2DMREAD_OFFSET 0x153
+
+#define OMAP2430_CONTROL_PADCONF_MUX_SIZE \
+ (OMAP2430_CONTROL_PADCONF_AD2DMREAD_OFFSET + 0x1)
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 07/16] omap: mux: Select SIP package for H4
2010-06-30 12:06 [PATCH 00/16] omap mux updates for 2.6.36 merge window Tony Lindgren
` (5 preceding siblings ...)
2010-06-30 12:06 ` [PATCH 06/16] omap: mux: Add data for 2430 Tony Lindgren
@ 2010-06-30 12:06 ` Tony Lindgren
2010-06-30 12:06 ` [PATCH 08/16] omap: mux: Select POP package for Apollon Tony Lindgren
` (8 subsequent siblings)
15 siblings, 0 replies; 23+ messages in thread
From: Tony Lindgren @ 2010-06-30 12:06 UTC (permalink / raw)
To: linux-arm-kernel
Select SIP package for H4
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/Kconfig | 1 +
arch/arm/mach-omap2/board-h4.c | 12 ++++++++++++
2 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index d3932d3..b59cdb7 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -50,6 +50,7 @@ config MACH_OMAP2_TUSB6010
config MACH_OMAP_H4
bool "OMAP 2420 H4 board"
depends on ARCH_OMAP2
+ select OMAP_PACKAGE_ZAF
select OMAP_DEBUG_DEVICES
config MACH_OMAP_APOLLON
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 54a231c..8c58f51 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -42,6 +42,8 @@
#include <plat/dma.h>
#include <plat/gpmc.h>
+#include "mux.h"
+
#define H4_FLASH_CS 0
#define H4_SMC91X_CS 1
@@ -338,8 +340,18 @@ static struct i2c_board_info __initdata h4_i2c_board_info[] = {
},
};
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init omap_h4_init(void)
{
+ omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAF);
+
/*
* Make sure the serial ports are muxed on at this point.
* You have to mux them off in device drivers later on
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 08/16] omap: mux: Select POP package for Apollon
2010-06-30 12:06 [PATCH 00/16] omap mux updates for 2.6.36 merge window Tony Lindgren
` (6 preceding siblings ...)
2010-06-30 12:06 ` [PATCH 07/16] omap: mux: Select SIP package for H4 Tony Lindgren
@ 2010-06-30 12:06 ` Tony Lindgren
2010-06-30 12:07 ` [PATCH 09/16] omap: mux: Select POP package for N8X0 Tony Lindgren
` (7 subsequent siblings)
15 siblings, 0 replies; 23+ messages in thread
From: Tony Lindgren @ 2010-06-30 12:06 UTC (permalink / raw)
To: linux-arm-kernel
Select POP package for Apollon
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/Kconfig | 1 +
arch/arm/mach-omap2/board-apollon.c | 12 ++++++++++++
2 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index b59cdb7..269f84f 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -56,6 +56,7 @@ config MACH_OMAP_H4
config MACH_OMAP_APOLLON
bool "OMAP 2420 Apollon board"
depends on ARCH_OMAP2
+ select OMAP_PACKAGE_ZAC
config MACH_OMAP_2430SDP
bool "OMAP 2430 SDP board"
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 987b24d..b86a879 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -42,6 +42,8 @@
#include <plat/gpmc.h>
#include <plat/control.h>
+#include "mux.h"
+
/* LED & Switch macros */
#define LED0_GPIO13 13
#define LED1_GPIO14 14
@@ -309,10 +311,20 @@ static void __init apollon_usb_init(void)
omap2_usbfs_init(&apollon_usb_config);
}
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init omap_apollon_init(void)
{
u32 v;
+ omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
+
apollon_led_init();
apollon_flash_init();
apollon_usb_init();
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 09/16] omap: mux: Select POP package for N8X0
2010-06-30 12:06 [PATCH 00/16] omap mux updates for 2.6.36 merge window Tony Lindgren
` (7 preceding siblings ...)
2010-06-30 12:06 ` [PATCH 08/16] omap: mux: Select POP package for Apollon Tony Lindgren
@ 2010-06-30 12:07 ` Tony Lindgren
2010-06-30 12:07 ` [PATCH 10/16] omap: mux: Select POP package for 2430SDP Tony Lindgren
` (6 subsequent siblings)
15 siblings, 0 replies; 23+ messages in thread
From: Tony Lindgren @ 2010-06-30 12:07 UTC (permalink / raw)
To: linux-arm-kernel
Select POP package for N8X0
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/Kconfig | 1 +
arch/arm/mach-omap2/board-n8x0.c | 11 +++++++++++
2 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 269f84f..4158368 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -120,6 +120,7 @@ config MACH_NOKIA_N810_WIMAX
config MACH_NOKIA_N8X0
bool "Nokia N800/N810"
depends on ARCH_OMAP2420
+ select OMAP_PACKAGE_ZAC
select MACH_NOKIA_N800
select MACH_NOKIA_N810
select MACH_NOKIA_N810_WIMAX
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 3ccc34e..5b9bbdc 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -33,6 +33,8 @@
#include <plat/mmc.h>
#include <plat/serial.h>
+#include "mux.h"
+
static int slot1_cover_open;
static int slot2_cover_open;
static struct device *mmc_device;
@@ -649,8 +651,17 @@ static void __init n8x0_init_irq(void)
omap_gpio_init();
}
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init n8x0_init_machine(void)
{
+ omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
/* FIXME: add n810 spi devices */
spi_register_board_info(n800_spi_board_info,
ARRAY_SIZE(n800_spi_board_info));
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 10/16] omap: mux: Select POP package for 2430SDP
2010-06-30 12:06 [PATCH 00/16] omap mux updates for 2.6.36 merge window Tony Lindgren
` (8 preceding siblings ...)
2010-06-30 12:07 ` [PATCH 09/16] omap: mux: Select POP package for N8X0 Tony Lindgren
@ 2010-06-30 12:07 ` Tony Lindgren
2010-06-30 12:07 ` [PATCH 11/16] omap: mux: Make omap2 FS USB code use new mux functions Tony Lindgren
` (5 subsequent siblings)
15 siblings, 0 replies; 23+ messages in thread
From: Tony Lindgren @ 2010-06-30 12:07 UTC (permalink / raw)
To: linux-arm-kernel
Select POP package for 2430SDP
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/Kconfig | 1 +
arch/arm/mach-omap2/board-2430sdp.c | 11 +++++++++++
2 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 4158368..f67f037 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -61,6 +61,7 @@ config MACH_OMAP_APOLLON
config MACH_OMAP_2430SDP
bool "OMAP 2430 SDP board"
depends on ARCH_OMAP2
+ select OMAP_PACKAGE_ZAC
config MACH_OMAP3_BEAGLE
bool "OMAP3 BEAGLE board"
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index ec920c9..281aa13 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -38,6 +38,7 @@
#include <plat/usb.h>
#include <plat/gpmc-smc91x.h>
+#include "mux.h"
#include "hsmmc.h"
#define SDP2430_CS0_BASE 0x04000000
@@ -217,10 +218,20 @@ static struct omap_usb_config sdp2430_usb_config __initdata = {
.pins[0] = 3,
};
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init omap_2430sdp_init(void)
{
int ret;
+ omap2430_mux_init(board_mux, OMAP_PACKAGE_ZAC);
+
omap2430_i2c_init();
platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 11/16] omap: mux: Make omap2 FS USB code use new mux functions
2010-06-30 12:06 [PATCH 00/16] omap mux updates for 2.6.36 merge window Tony Lindgren
` (9 preceding siblings ...)
2010-06-30 12:07 ` [PATCH 10/16] omap: mux: Select POP package for 2430SDP Tony Lindgren
@ 2010-06-30 12:07 ` Tony Lindgren
2010-06-30 12:07 ` [PATCH 12/16] omap: mux: Do keypad muxing in board-*.c files Tony Lindgren
` (4 subsequent siblings)
15 siblings, 0 replies; 23+ messages in thread
From: Tony Lindgren @ 2010-06-30 12:07 UTC (permalink / raw)
To: linux-arm-kernel
Make omap2 FS USB code use new mux functions. Do not mux usb2_tllse0
as it has multiple options.
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/usb-fs.c | 33 ++++++++++++++++++---------------
1 files changed, 18 insertions(+), 15 deletions(-)
diff --git a/arch/arm/mach-omap2/usb-fs.c b/arch/arm/mach-omap2/usb-fs.c
index a445519..a216d88 100644
--- a/arch/arm/mach-omap2/usb-fs.c
+++ b/arch/arm/mach-omap2/usb-fs.c
@@ -30,7 +30,6 @@
#include <asm/irq.h>
#include <plat/control.h>
-#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
@@ -40,6 +39,8 @@
#define INT_USB_IRQ_HGEN INT_24XX_USB_IRQ_HGEN
#define INT_USB_IRQ_OTG INT_24XX_USB_IRQ_OTG
+#include "mux.h"
+
#if defined(CONFIG_ARCH_OMAP2)
#ifdef CONFIG_USB_GADGET_OMAP
@@ -209,13 +210,13 @@ static u32 __init omap2_usb0_init(unsigned nwires, unsigned is_device)
return 0;
if (is_device)
- omap_cfg_reg(J20_24XX_USB0_PUEN);
+ omap_mux_init_signal("usb0_puen", 0);
- omap_cfg_reg(K18_24XX_USB0_DAT);
- omap_cfg_reg(K19_24XX_USB0_TXEN);
- omap_cfg_reg(J14_24XX_USB0_SE0);
+ omap_mux_init_signal("usb0_dat", 0);
+ omap_mux_init_signal("usb0_txen", 0);
+ omap_mux_init_signal("usb0_se0", 0);
if (nwires != 3)
- omap_cfg_reg(J18_24XX_USB0_RCV);
+ omap_mux_init_signal("usb0_rcv", 0);
switch (nwires) {
case 3:
@@ -228,8 +229,8 @@ static u32 __init omap2_usb0_init(unsigned nwires, unsigned is_device)
break;
case 6:
syscon1 = 3;
- omap_cfg_reg(J19_24XX_USB0_VP);
- omap_cfg_reg(K20_24XX_USB0_VM);
+ omap_mux_init_signal("usb0_vp", 0);
+ omap_mux_init_signal("usb0_vm", 0);
omap2_usb_devconf_set(0, USB_UNIDIR);
break;
default:
@@ -289,12 +290,12 @@ static u32 __init omap2_usb2_init(unsigned nwires, unsigned alt_pingroup)
if (alt_pingroup || nwires == 0)
return 0;
- omap_cfg_reg(Y11_24XX_USB2_DAT);
- omap_cfg_reg(AA10_24XX_USB2_SE0);
+ omap_mux_init_signal("usb2_dat", 0);
+ omap_mux_init_signal("usb2_se0", 0);
if (nwires > 2)
- omap_cfg_reg(AA12_24XX_USB2_TXEN);
+ omap_mux_init_signal("usb2_txen", 0);
if (nwires > 3)
- omap_cfg_reg(AA6_24XX_USB2_RCV);
+ omap_mux_init_signal("usb2_rcv", 0);
switch (nwires) {
case 2:
@@ -313,11 +314,13 @@ static u32 __init omap2_usb2_init(unsigned nwires, unsigned alt_pingroup)
omap2_usb_devconf_set(2, USB_BIDIR);
break;
case 5:
- omap_cfg_reg(AA4_24XX_USB2_TLLSE0);
- /* NOTE: board-specific code must override this setting if
- * this TLL link is not using DP/DM. Something must also
+ /* NOTE: board-specific code must mux this setting depending
+ * on TLL link using DP/DM. Something must also
* set up OTG_SYSCON2.HMC_TLL{ATTACH,SPEED}
+ * 2420: hdq_sio.usb2_tllse0 or vlynq_rx0.usb2_tllse0
+ * 2430: hdq_sio.usb2_tllse0 or sdmmc2_dat0.usb2_tllse0
*/
+
syscon1 = 3;
omap2_usb2_enable_5pinunitll();
break;
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 12/16] omap: mux: Do keypad muxing in board-*.c files
2010-06-30 12:06 [PATCH 00/16] omap mux updates for 2.6.36 merge window Tony Lindgren
` (10 preceding siblings ...)
2010-06-30 12:07 ` [PATCH 11/16] omap: mux: Make omap2 FS USB code use new mux functions Tony Lindgren
@ 2010-06-30 12:07 ` Tony Lindgren
2010-06-30 12:07 ` [PATCH 13/16] omap: mux: Mux Apollon LCD power in board-apollon.c Tony Lindgren
` (3 subsequent siblings)
15 siblings, 0 replies; 23+ messages in thread
From: Tony Lindgren @ 2010-06-30 12:07 UTC (permalink / raw)
To: linux-arm-kernel
This way we get pin muxing out of plat-omap and can convert H4 to use the
new mux functions.
Note that it should be safe to assume we can mux all the keypad pins
except on H4 which may have Menelaus connected.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap1/board-fsample.c | 12 +++++++
arch/arm/mach-omap1/board-h2.c | 13 +++++++
arch/arm/mach-omap1/board-h3.c | 13 +++++++
arch/arm/mach-omap1/board-perseus2.c | 12 +++++++
arch/arm/mach-omap2/board-h4.c | 17 +++++++++
arch/arm/plat-omap/devices.c | 61 ----------------------------------
6 files changed, 67 insertions(+), 61 deletions(-)
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 096f2ed..405ff7a 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -292,6 +292,18 @@ static void __init omap_fsample_init(void)
omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
+ /* Mux pins for keypad */
+ omap_cfg_reg(E2_7XX_KBR0);
+ omap_cfg_reg(J7_7XX_KBR1);
+ omap_cfg_reg(E1_7XX_KBR2);
+ omap_cfg_reg(F3_7XX_KBR3);
+ omap_cfg_reg(D2_7XX_KBR4);
+ omap_cfg_reg(C2_7XX_KBC0);
+ omap_cfg_reg(D3_7XX_KBC1);
+ omap_cfg_reg(E4_7XX_KBC2);
+ omap_cfg_reg(F4_7XX_KBC3);
+ omap_cfg_reg(E3_7XX_KBC4);
+
platform_add_devices(devices, ARRAY_SIZE(devices));
omap_board_config = fsample_config;
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 5f30188..ee46974 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -437,6 +437,19 @@ static void __init h2_init(void)
/* omap_cfg_reg(U19_ARMIO1); */ /* CD */
omap_cfg_reg(BALLOUT_V8_ARMIO3); /* WP */
+ /* Mux pins for keypad */
+ omap_cfg_reg(F18_1610_KBC0);
+ omap_cfg_reg(D20_1610_KBC1);
+ omap_cfg_reg(D19_1610_KBC2);
+ omap_cfg_reg(E18_1610_KBC3);
+ omap_cfg_reg(C21_1610_KBC4);
+ omap_cfg_reg(G18_1610_KBR0);
+ omap_cfg_reg(F19_1610_KBR1);
+ omap_cfg_reg(H14_1610_KBR2);
+ omap_cfg_reg(E20_1610_KBR3);
+ omap_cfg_reg(E19_1610_KBR4);
+ omap_cfg_reg(N19_1610_KBR5);
+
/* Irda */
#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE)
omap_writel(omap_readl(FUNC_MUX_CTRL_A) | 7, FUNC_MUX_CTRL_A);
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 0be1d3b..a228e9d 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -397,6 +397,19 @@ static void __init h3_init(void)
/* GPIO10 pullup/down register, Enable pullup on GPIO10 */
omap_cfg_reg(V2_1710_GPIO10);
+ /* Mux pins for keypad */
+ omap_cfg_reg(F18_1610_KBC0);
+ omap_cfg_reg(D20_1610_KBC1);
+ omap_cfg_reg(D19_1610_KBC2);
+ omap_cfg_reg(E18_1610_KBC3);
+ omap_cfg_reg(C21_1610_KBC4);
+ omap_cfg_reg(G18_1610_KBR0);
+ omap_cfg_reg(F19_1610_KBR1);
+ omap_cfg_reg(H14_1610_KBR2);
+ omap_cfg_reg(E20_1610_KBR3);
+ omap_cfg_reg(E19_1610_KBR4);
+ omap_cfg_reg(N19_1610_KBR5);
+
platform_add_devices(devices, ARRAY_SIZE(devices));
spi_register_board_info(h3_spi_board_info,
ARRAY_SIZE(h3_spi_board_info));
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index e854d57..5069034 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -260,6 +260,18 @@ static void __init omap_perseus2_init(void)
omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
+ /* Mux pins for keypad */
+ omap_cfg_reg(E2_7XX_KBR0);
+ omap_cfg_reg(J7_7XX_KBR1);
+ omap_cfg_reg(E1_7XX_KBR2);
+ omap_cfg_reg(F3_7XX_KBR3);
+ omap_cfg_reg(D2_7XX_KBR4);
+ omap_cfg_reg(C2_7XX_KBC0);
+ omap_cfg_reg(D3_7XX_KBC1);
+ omap_cfg_reg(E4_7XX_KBC2);
+ omap_cfg_reg(F4_7XX_KBC3);
+ omap_cfg_reg(E3_7XX_KBC4);
+
platform_add_devices(devices, ARRAY_SIZE(devices));
omap_board_config = perseus2_config;
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 8c58f51..cdcd4fb 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -363,11 +363,28 @@ static void __init omap_h4_init(void)
#endif
#if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE)
+ omap_mux_init_gpio(88, OMAP_PULL_ENA | OMAP_PULL_UP);
+ omap_mux_init_gpio(89, OMAP_PULL_ENA | OMAP_PULL_UP);
+ omap_mux_init_gpio(124, OMAP_PULL_ENA | OMAP_PULL_UP);
+ omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
if (omap_has_menelaus()) {
+ omap_mux_init_signal("sdrc_a14.gpio0",
+ OMAP_PULL_ENA | OMAP_PULL_UP);
+ omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
+ omap_mux_init_signal("gpio_98", 0);
row_gpios[5] = 0;
col_gpios[2] = 15;
col_gpios[6] = 18;
+ } else {
+ omap_mux_init_signal("gpio_96", OMAP_PULL_ENA | OMAP_PULL_UP);
+ omap_mux_init_signal("gpio_100", 0);
+ omap_mux_init_signal("gpio_98", 0);
}
+ omap_mux_init_signal("gpio_90", 0);
+ omap_mux_init_signal("gpio_91", 0);
+ omap_mux_init_signal("gpio_36", 0);
+ omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
+ omap_mux_init_signal("gpio_97", 0);
#endif
i2c_register_board_info(1, h4_i2c_board_info,
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 95677d1..ca5b229 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -24,7 +24,6 @@
#include <plat/control.h>
#include <plat/board.h>
#include <plat/mmc.h>
-#include <plat/mux.h>
#include <mach/gpio.h>
#include <plat/menelaus.h>
#include <plat/mcbsp.h>
@@ -93,66 +92,7 @@ static inline void omap_init_dsp(void) { }
#endif /* CONFIG_OMAP_DSP */
/*-------------------------------------------------------------------------*/
-#if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE)
-static void omap_init_kp(void)
-{
- /* 2430 and 34xx keypad is on TWL4030 */
- if (cpu_is_omap2430() || cpu_is_omap34xx())
- return;
-
- if (machine_is_omap_h2() || machine_is_omap_h3()) {
- omap_cfg_reg(F18_1610_KBC0);
- omap_cfg_reg(D20_1610_KBC1);
- omap_cfg_reg(D19_1610_KBC2);
- omap_cfg_reg(E18_1610_KBC3);
- omap_cfg_reg(C21_1610_KBC4);
-
- omap_cfg_reg(G18_1610_KBR0);
- omap_cfg_reg(F19_1610_KBR1);
- omap_cfg_reg(H14_1610_KBR2);
- omap_cfg_reg(E20_1610_KBR3);
- omap_cfg_reg(E19_1610_KBR4);
- omap_cfg_reg(N19_1610_KBR5);
- } else if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
- omap_cfg_reg(E2_7XX_KBR0);
- omap_cfg_reg(J7_7XX_KBR1);
- omap_cfg_reg(E1_7XX_KBR2);
- omap_cfg_reg(F3_7XX_KBR3);
- omap_cfg_reg(D2_7XX_KBR4);
-
- omap_cfg_reg(C2_7XX_KBC0);
- omap_cfg_reg(D3_7XX_KBC1);
- omap_cfg_reg(E4_7XX_KBC2);
- omap_cfg_reg(F4_7XX_KBC3);
- omap_cfg_reg(E3_7XX_KBC4);
- } else if (machine_is_omap_h4()) {
- omap_cfg_reg(T19_24XX_KBR0);
- omap_cfg_reg(R19_24XX_KBR1);
- omap_cfg_reg(V18_24XX_KBR2);
- omap_cfg_reg(M21_24XX_KBR3);
- omap_cfg_reg(E5__24XX_KBR4);
- if (omap_has_menelaus()) {
- omap_cfg_reg(B3__24XX_KBR5);
- omap_cfg_reg(AA4_24XX_KBC2);
- omap_cfg_reg(B13_24XX_KBC6);
- } else {
- omap_cfg_reg(M18_24XX_KBR5);
- omap_cfg_reg(H19_24XX_KBC2);
- omap_cfg_reg(N19_24XX_KBC6);
- }
- omap_cfg_reg(R20_24XX_KBC0);
- omap_cfg_reg(M14_24XX_KBC1);
- omap_cfg_reg(V17_24XX_KBC3);
- omap_cfg_reg(P21_24XX_KBC4);
- omap_cfg_reg(L14_24XX_KBC5);
- }
-}
-#else
-static inline void omap_init_kp(void) {}
-#endif
-
-/*-------------------------------------------------------------------------*/
#if defined(CONFIG_OMAP_MCBSP) || defined(CONFIG_OMAP_MCBSP_MODULE)
static struct platform_device **omap_mcbsp_devices;
@@ -420,7 +360,6 @@ static int __init omap_init_devices(void)
* in alphabetical order so they're easier to sort through.
*/
omap_init_dsp();
- omap_init_kp();
omap_init_rng();
omap_init_mcpdm();
omap_init_uwire();
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 13/16] omap: mux: Mux Apollon LCD power in board-apollon.c
2010-06-30 12:06 [PATCH 00/16] omap mux updates for 2.6.36 merge window Tony Lindgren
` (11 preceding siblings ...)
2010-06-30 12:07 ` [PATCH 12/16] omap: mux: Do keypad muxing in board-*.c files Tony Lindgren
@ 2010-06-30 12:07 ` Tony Lindgren
2010-07-01 7:05 ` Tomi Valkeinen
2010-06-30 12:07 ` [PATCH 14/16] omap: mux: Mux 2430 USB0HS_STP in board-2430.c Tony Lindgren
` (2 subsequent siblings)
15 siblings, 1 reply; 23+ messages in thread
From: Tony Lindgren @ 2010-06-30 12:07 UTC (permalink / raw)
To: linux-arm-kernel
Use the new mux function for that.
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/board-apollon.c | 3 +++
drivers/video/omap/lcd_apollon.c | 3 ---
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index b86a879..bc67026 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -332,6 +332,9 @@ static void __init omap_apollon_init(void)
/* REVISIT: where's the correct place */
omap_cfg_reg(W19_24XX_SYS_NIRQ);
+ /* LCD PWR_EN */
+ omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
+
/* Use Interal loop-back in MMC/SDIO Module Input Clock selection */
v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
v |= (1 << 24);
diff --git a/drivers/video/omap/lcd_apollon.c b/drivers/video/omap/lcd_apollon.c
index 2be94eb..10459d8 100644
--- a/drivers/video/omap/lcd_apollon.c
+++ b/drivers/video/omap/lcd_apollon.c
@@ -25,7 +25,6 @@
#include <linux/platform_device.h>
#include <mach/gpio.h>
-#include <plat/mux.h>
#include "omapfb.h"
@@ -34,8 +33,6 @@
static int apollon_panel_init(struct lcd_panel *panel,
struct omapfb_device *fbdev)
{
- /* configure LCD PWR_EN */
- omap_cfg_reg(M21_242X_GPIO11);
return 0;
}
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 14/16] omap: mux: Mux 2430 USB0HS_STP in board-2430.c
2010-06-30 12:06 [PATCH 00/16] omap mux updates for 2.6.36 merge window Tony Lindgren
` (12 preceding siblings ...)
2010-06-30 12:07 ` [PATCH 13/16] omap: mux: Mux Apollon LCD power in board-apollon.c Tony Lindgren
@ 2010-06-30 12:07 ` Tony Lindgren
2010-06-30 12:28 ` Felipe Balbi
2010-06-30 12:07 ` [PATCH 15/16] omap: mux: Convert 2420 platform init code to use new mux code Tony Lindgren
2010-06-30 12:07 ` [PATCH 16/16] omap: mux: Remove old " Tony Lindgren
15 siblings, 1 reply; 23+ messages in thread
From: Tony Lindgren @ 2010-06-30 12:07 UTC (permalink / raw)
To: linux-arm-kernel
Use new mux functions for that. There are no other known 2430 boards
that need this mux.
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/board-2430sdp.c | 4 +++-
drivers/usb/musb/omap2430.c | 4 ----
2 files changed, 3 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 281aa13..71bf509 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -31,7 +31,6 @@
#include <asm/mach/map.h>
#include <mach/gpio.h>
-#include <plat/mux.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/gpmc.h>
@@ -238,7 +237,10 @@ static void __init omap_2430sdp_init(void)
omap_serial_init();
omap2_hsmmc_init(mmc);
omap2_usbfs_init(&sdp2430_usb_config);
+
+ omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP);
usb_musb_init(&musb_board_data);
+
board_smc91x_init();
/* Turn off secondary LCD backlight */
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index e06d65e..5f04d3f 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -194,10 +194,6 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
u32 l;
struct omap_musb_board_data *data = board_data;
-#if defined(CONFIG_ARCH_OMAP2430)
- omap_cfg_reg(AE5_2430_USB0HS_STP);
-#endif
-
/* We require some kind of external transceiver, hooked
* up through ULPI. TWL4030-family PMICs include one,
* which needs a driver, drivers aren't always needed.
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 15/16] omap: mux: Convert 2420 platform init code to use new mux code
2010-06-30 12:06 [PATCH 00/16] omap mux updates for 2.6.36 merge window Tony Lindgren
` (13 preceding siblings ...)
2010-06-30 12:07 ` [PATCH 14/16] omap: mux: Mux 2430 USB0HS_STP in board-2430.c Tony Lindgren
@ 2010-06-30 12:07 ` Tony Lindgren
2010-06-30 12:07 ` [PATCH 16/16] omap: mux: Remove old " Tony Lindgren
15 siblings, 0 replies; 23+ messages in thread
From: Tony Lindgren @ 2010-06-30 12:07 UTC (permalink / raw)
To: linux-arm-kernel
Convert 2420 platform init code to use new mux code
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/board-apollon.c | 13 ++++++-------
arch/arm/mach-omap2/board-h4.c | 7 +++----
arch/arm/mach-omap2/devices.c | 25 ++++++++++++-------------
arch/arm/mach-omap2/i2c.c | 27 +++++++--------------------
arch/arm/mach-omap2/mcbsp.c | 13 +++++++------
arch/arm/mach-omap2/usb-tusb6010.c | 14 +++++++-------
6 files changed, 42 insertions(+), 57 deletions(-)
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index bc67026..8cea623 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -35,7 +35,6 @@
#include <mach/gpio.h>
#include <plat/led.h>
-#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/common.h>
@@ -246,7 +245,7 @@ static inline void __init apollon_init_smc91x(void)
apollon_smc91x_resources[0].end = base + 0x30f;
udelay(100);
- omap_cfg_reg(W4__24XX_GPIO74);
+ omap_mux_init_gpio(74, 0);
if (gpio_request(APOLLON_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
APOLLON_ETHR_GPIO_IRQ);
@@ -288,15 +287,15 @@ static void __init omap_apollon_init_irq(void)
static void __init apollon_led_init(void)
{
/* LED0 - AA10 */
- omap_cfg_reg(AA10_242X_GPIO13);
+ omap_mux_init_signal("vlynq_clk.gpio_13", 0);
gpio_request(LED0_GPIO13, "LED0");
gpio_direction_output(LED0_GPIO13, 0);
/* LED1 - AA6 */
- omap_cfg_reg(AA6_242X_GPIO14);
+ omap_mux_init_signal("vlynq_rx1.gpio_14", 0);
gpio_request(LED1_GPIO14, "LED1");
gpio_direction_output(LED1_GPIO14, 0);
/* LED2 - AA4 */
- omap_cfg_reg(AA4_242X_GPIO15);
+ omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
gpio_request(LED2_GPIO15, "LED2");
gpio_direction_output(LED2_GPIO15, 0);
}
@@ -305,7 +304,7 @@ static void __init apollon_usb_init(void)
{
/* USB device */
/* DEVICE_SUSPEND */
- omap_cfg_reg(P21_242X_GPIO12);
+ omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
gpio_request(12, "USB suspend");
gpio_direction_output(12, 0);
omap2_usbfs_init(&apollon_usb_config);
@@ -330,7 +329,7 @@ static void __init omap_apollon_init(void)
apollon_usb_init();
/* REVISIT: where's the correct place */
- omap_cfg_reg(W19_24XX_SYS_NIRQ);
+ omap_mux_init_signal("sys_nirq", OMAP_PULL_ENA | OMAP_PULL_UP);
/* LCD PWR_EN */
omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index cdcd4fb..2d9ff0f 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -33,7 +33,6 @@
#include <plat/control.h>
#include <mach/gpio.h>
-#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/common.h>
@@ -248,7 +247,7 @@ static inline void __init h4_init_debug(void)
udelay(100);
- omap_cfg_reg(M15_24XX_GPIO92);
+ omap_mux_init_gpio(92, 0);
if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0)
gpmc_cs_free(eth_cs);
@@ -358,8 +357,8 @@ static void __init omap_h4_init(void)
* if not needed.
*/
#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE)
- omap_cfg_reg(K15_24XX_UART3_TX);
- omap_cfg_reg(K14_24XX_UART3_RX);
+ omap_mux_init_signal("uart3_tx_irtx.uart3_tx_irtx", 0);
+ omap_mux_init_signal("uart3_rx_irrx.uart3_rx_irrx", 0);
#endif
#if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE)
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 03e6c9e..3ae9d0a 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -25,7 +25,6 @@
#include <plat/control.h>
#include <plat/tc.h>
#include <plat/board.h>
-#include <plat/mux.h>
#include <mach/gpio.h>
#include <plat/mmc.h>
#include <plat/dma.h>
@@ -672,19 +671,19 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
OMAP_PIN_INPUT_PULLUP);
if (cpu_is_omap2420() && controller_nr == 0) {
- omap_cfg_reg(H18_24XX_MMC_CMD);
- omap_cfg_reg(H15_24XX_MMC_CLKI);
- omap_cfg_reg(G19_24XX_MMC_CLKO);
- omap_cfg_reg(F20_24XX_MMC_DAT0);
- omap_cfg_reg(F19_24XX_MMC_DAT_DIR0);
- omap_cfg_reg(G18_24XX_MMC_CMD_DIR);
+ omap_mux_init_signal("sdmmc_cmd", 0);
+ omap_mux_init_signal("sdmmc_clki", 0);
+ omap_mux_init_signal("sdmmc_clko", 0);
+ omap_mux_init_signal("sdmmc_dat0", 0);
+ omap_mux_init_signal("sdmmc_dat_dir0", 0);
+ omap_mux_init_signal("sdmmc_cmd_dir", 0);
if (mmc_controller->slots[0].wires == 4) {
- omap_cfg_reg(H14_24XX_MMC_DAT1);
- omap_cfg_reg(E19_24XX_MMC_DAT2);
- omap_cfg_reg(D19_24XX_MMC_DAT3);
- omap_cfg_reg(E20_24XX_MMC_DAT_DIR1);
- omap_cfg_reg(F18_24XX_MMC_DAT_DIR2);
- omap_cfg_reg(E18_24XX_MMC_DAT_DIR3);
+ omap_mux_init_signal("sdmmc_dat1", 0);
+ omap_mux_init_signal("sdmmc_dat2", 0);
+ omap_mux_init_signal("sdmmc_dat3", 0);
+ omap_mux_init_signal("sdmmc_dat_dir1", 0);
+ omap_mux_init_signal("sdmmc_dat_dir2", 0);
+ omap_mux_init_signal("sdmmc_dat_dir3", 0);
}
/*
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index 7951ae1..79c478c 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -21,32 +21,19 @@
#include <plat/cpu.h>
#include <plat/i2c.h>
-#include <plat/mux.h>
#include "mux.h"
void __init omap2_i2c_mux_pins(int bus_id)
{
- if (cpu_is_omap24xx()) {
- const int omap24xx_pins[][2] = {
- { M19_24XX_I2C1_SCL, L15_24XX_I2C1_SDA },
- { J15_24XX_I2C2_SCL, H19_24XX_I2C2_SDA },
- };
- int scl, sda;
-
- scl = omap24xx_pins[bus_id - 1][0];
- sda = omap24xx_pins[bus_id - 1][1];
- omap_cfg_reg(sda);
- omap_cfg_reg(scl);
- }
+ char mux_name[sizeof("i2c2_scl.i2c2_scl")];
/* First I2C bus is not muxable */
- if (cpu_is_omap34xx() && bus_id > 1) {
- char mux_name[sizeof("i2c2_scl.i2c2_scl")];
+ if (bus_id == 1)
+ return;
- sprintf(mux_name, "i2c%i_scl.i2c%i_scl", bus_id, bus_id);
- omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
- sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id);
- omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
- }
+ sprintf(mux_name, "i2c%i_scl.i2c%i_scl", bus_id, bus_id);
+ omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
+ sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id);
+ omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
}
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index c293370..87aa4c9 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -20,17 +20,18 @@
#include <mach/irqs.h>
#include <plat/dma.h>
-#include <plat/mux.h>
#include <plat/cpu.h>
#include <plat/mcbsp.h>
+#include "mux.h"
+
static void omap2_mcbsp2_mux_setup(void)
{
- omap_cfg_reg(Y15_24XX_MCBSP2_CLKX);
- omap_cfg_reg(R14_24XX_MCBSP2_FSX);
- omap_cfg_reg(W15_24XX_MCBSP2_DR);
- omap_cfg_reg(V15_24XX_MCBSP2_DX);
- omap_cfg_reg(V14_24XX_GPIO117);
+ omap_mux_init_signal("eac_ac_sclk.mcbsp2_clkx", OMAP_PULL_ENA);
+ omap_mux_init_signal("eac_ac_fs.mcbsp2_fsx", OMAP_PULL_ENA);
+ omap_mux_init_signal("eac_ac_din.mcbsp2_dr", OMAP_PULL_ENA);
+ omap_mux_init_signal("eac_ac_dout.mcbsp2_dx", OMAP_PULL_ENA);
+ omap_mux_init_gpio(117, OMAP_PULL_ENA);
/*
* TODO: Need to add MUX settings for OMAP 2430 SDP
*/
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 10a2013..64a0112 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -17,8 +17,8 @@
#include <linux/usb/musb.h>
#include <plat/gpmc.h>
-#include <plat/mux.h>
+#include "mux.h"
static u8 async_cs, sync_cs;
static unsigned refclk_psec;
@@ -325,17 +325,17 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
else {
/* assume OMAP 2420 ES2.0 and later */
if (dmachan & (1 << 0))
- omap_cfg_reg(AA10_242X_DMAREQ0);
+ omap_mux_init_signal("sys_ndmareq0", 0);
if (dmachan & (1 << 1))
- omap_cfg_reg(AA6_242X_DMAREQ1);
+ omap_mux_init_signal("sys_ndmareq1", 0);
if (dmachan & (1 << 2))
- omap_cfg_reg(E4_242X_DMAREQ2);
+ omap_mux_init_signal("sys_ndmareq2", 0);
if (dmachan & (1 << 3))
- omap_cfg_reg(G4_242X_DMAREQ3);
+ omap_mux_init_signal("sys_ndmareq3", 0);
if (dmachan & (1 << 4))
- omap_cfg_reg(D3_242X_DMAREQ4);
+ omap_mux_init_signal("sys_ndmareq4", 0);
if (dmachan & (1 << 5))
- omap_cfg_reg(E3_242X_DMAREQ5);
+ omap_mux_init_signal("sys_ndmareq5", 0);
}
/* so far so good ... register the device */
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 16/16] omap: mux: Remove old mux code
2010-06-30 12:06 [PATCH 00/16] omap mux updates for 2.6.36 merge window Tony Lindgren
` (14 preceding siblings ...)
2010-06-30 12:07 ` [PATCH 15/16] omap: mux: Convert 2420 platform init code to use new mux code Tony Lindgren
@ 2010-06-30 12:07 ` Tony Lindgren
15 siblings, 0 replies; 23+ messages in thread
From: Tony Lindgren @ 2010-06-30 12:07 UTC (permalink / raw)
To: linux-arm-kernel
All mach-omap2 omaps should now use the new mux code.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/board-3630sdp.c | 1
arch/arm/mach-omap2/board-generic.c | 1
arch/arm/mach-omap2/board-rx51-peripherals.c | 1
arch/arm/mach-omap2/board-rx51-video.c | 1
arch/arm/mach-omap2/io.c | 2
arch/arm/mach-omap2/mux.c | 298 --------------------------
arch/arm/mach-omap2/pm24xx.c | 1
arch/arm/mach-omap2/usb-ehci.c | 1
arch/arm/mach-omap2/usb-musb.c | 1
arch/arm/plat-omap/include/plat/mux.h | 220 -------------------
arch/arm/plat-omap/mux.c | 2
11 files changed, 1 insertions(+), 528 deletions(-)
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 504d2bd..f267dc0 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -18,7 +18,6 @@
#include <plat/common.h>
#include <plat/board.h>
#include <plat/gpmc-smc91x.h>
-#include <plat/mux.h>
#include <plat/usb.h>
#include <mach/board-zoom.h>
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 16cc068..9a7f790 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -26,7 +26,6 @@
#include <asm/mach/map.h>
#include <mach/gpio.h>
-#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/common.h>
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index abdf321..5ddf156 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -25,7 +25,6 @@
#include <linux/mmc/host.h>
#include <plat/mcspi.h>
-#include <plat/mux.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/dma.h>
diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
index b743a4f..5a1005b 100644
--- a/arch/arm/mach-omap2/board-rx51-video.c
+++ b/arch/arm/mach-omap2/board-rx51-video.c
@@ -16,7 +16,6 @@
#include <linux/mm.h>
#include <asm/mach-types.h>
-#include <plat/mux.h>
#include <plat/display.h>
#include <plat/vram.h>
#include <plat/mcspi.h>
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 3cfb425..b12d715 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -28,7 +28,6 @@
#include <asm/mach/map.h>
-#include <plat/mux.h>
#include <plat/sram.h>
#include <plat/sdrc.h>
#include <plat/gpmc.h>
@@ -324,7 +323,6 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
omap2430_hwmod_init();
else if (cpu_is_omap34xx())
omap3xxx_hwmod_init();
- omap2_mux_init();
/* The OPP tables have to be registered before a clk init */
omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 197e295..be52fab 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -37,7 +37,6 @@
#include <asm/system.h>
#include <plat/control.h>
-#include <plat/mux.h>
#include "mux.h"
@@ -78,301 +77,6 @@ void omap_mux_write_array(struct omap_board_mux *board_mux)
}
}
-#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_OMAP_MUX)
-
-static struct omap_mux_cfg arch_mux_cfg;
-
-/* NOTE: See mux.h for the enumeration */
-
-static struct pin_config __initdata_or_module omap24xx_pins[] = {
-/*
- * description mux mux pull pull debug
- * offset mode ena type
- */
-
-/* 24xx I2C */
-MUX_CFG_24XX("M19_24XX_I2C1_SCL", 0x111, 0, 0, 0, 1)
-MUX_CFG_24XX("L15_24XX_I2C1_SDA", 0x112, 0, 0, 0, 1)
-MUX_CFG_24XX("J15_24XX_I2C2_SCL", 0x113, 0, 0, 1, 1)
-MUX_CFG_24XX("H19_24XX_I2C2_SDA", 0x114, 0, 0, 0, 1)
-
-/* Menelaus interrupt */
-MUX_CFG_24XX("W19_24XX_SYS_NIRQ", 0x12c, 0, 1, 1, 1)
-
-/* 24xx clocks */
-MUX_CFG_24XX("W14_24XX_SYS_CLKOUT", 0x137, 0, 1, 1, 1)
-
-/* 24xx GPMC chipselects, wait pin monitoring */
-MUX_CFG_24XX("E2_GPMC_NCS2", 0x08e, 0, 1, 1, 1)
-MUX_CFG_24XX("L2_GPMC_NCS7", 0x093, 0, 1, 1, 1)
-MUX_CFG_24XX("L3_GPMC_WAIT0", 0x09a, 0, 1, 1, 1)
-MUX_CFG_24XX("N7_GPMC_WAIT1", 0x09b, 0, 1, 1, 1)
-MUX_CFG_24XX("M1_GPMC_WAIT2", 0x09c, 0, 1, 1, 1)
-MUX_CFG_24XX("P1_GPMC_WAIT3", 0x09d, 0, 1, 1, 1)
-
-/* 24xx McBSP */
-MUX_CFG_24XX("Y15_24XX_MCBSP2_CLKX", 0x124, 1, 1, 0, 1)
-MUX_CFG_24XX("R14_24XX_MCBSP2_FSX", 0x125, 1, 1, 0, 1)
-MUX_CFG_24XX("W15_24XX_MCBSP2_DR", 0x126, 1, 1, 0, 1)
-MUX_CFG_24XX("V15_24XX_MCBSP2_DX", 0x127, 1, 1, 0, 1)
-
-/* 24xx GPIO */
-MUX_CFG_24XX("M21_242X_GPIO11", 0x0c9, 3, 1, 1, 1)
-MUX_CFG_24XX("P21_242X_GPIO12", 0x0ca, 3, 0, 0, 1)
-MUX_CFG_24XX("AA10_242X_GPIO13", 0x0e5, 3, 0, 0, 1)
-MUX_CFG_24XX("AA6_242X_GPIO14", 0x0e6, 3, 0, 0, 1)
-MUX_CFG_24XX("AA4_242X_GPIO15", 0x0e7, 3, 0, 0, 1)
-MUX_CFG_24XX("Y11_242X_GPIO16", 0x0e8, 3, 0, 0, 1)
-MUX_CFG_24XX("AA12_242X_GPIO17", 0x0e9, 3, 0, 0, 1)
-MUX_CFG_24XX("AA8_242X_GPIO58", 0x0ea, 3, 0, 0, 1)
-MUX_CFG_24XX("Y20_24XX_GPIO60", 0x12c, 3, 0, 0, 1)
-MUX_CFG_24XX("W4__24XX_GPIO74", 0x0f2, 3, 0, 0, 1)
-MUX_CFG_24XX("N15_24XX_GPIO85", 0x103, 3, 0, 0, 1)
-MUX_CFG_24XX("M15_24XX_GPIO92", 0x10a, 3, 0, 0, 1)
-MUX_CFG_24XX("P20_24XX_GPIO93", 0x10b, 3, 0, 0, 1)
-MUX_CFG_24XX("P18_24XX_GPIO95", 0x10d, 3, 0, 0, 1)
-MUX_CFG_24XX("M18_24XX_GPIO96", 0x10e, 3, 0, 0, 1)
-MUX_CFG_24XX("L14_24XX_GPIO97", 0x10f, 3, 0, 0, 1)
-MUX_CFG_24XX("J15_24XX_GPIO99", 0x113, 3, 1, 1, 1)
-MUX_CFG_24XX("V14_24XX_GPIO117", 0x128, 3, 1, 0, 1)
-MUX_CFG_24XX("P14_24XX_GPIO125", 0x140, 3, 1, 1, 1)
-
-/* 242x DBG GPIO */
-MUX_CFG_24XX("V4_242X_GPIO49", 0xd3, 3, 0, 0, 1)
-MUX_CFG_24XX("W2_242X_GPIO50", 0xd4, 3, 0, 0, 1)
-MUX_CFG_24XX("U4_242X_GPIO51", 0xd5, 3, 0, 0, 1)
-MUX_CFG_24XX("V3_242X_GPIO52", 0xd6, 3, 0, 0, 1)
-MUX_CFG_24XX("V2_242X_GPIO53", 0xd7, 3, 0, 0, 1)
-MUX_CFG_24XX("V6_242X_GPIO53", 0xcf, 3, 0, 0, 1)
-MUX_CFG_24XX("T4_242X_GPIO54", 0xd8, 3, 0, 0, 1)
-MUX_CFG_24XX("Y4_242X_GPIO54", 0xd0, 3, 0, 0, 1)
-MUX_CFG_24XX("T3_242X_GPIO55", 0xd9, 3, 0, 0, 1)
-MUX_CFG_24XX("U2_242X_GPIO56", 0xda, 3, 0, 0, 1)
-
-/* 24xx external DMA requests */
-MUX_CFG_24XX("AA10_242X_DMAREQ0", 0x0e5, 2, 0, 0, 1)
-MUX_CFG_24XX("AA6_242X_DMAREQ1", 0x0e6, 2, 0, 0, 1)
-MUX_CFG_24XX("E4_242X_DMAREQ2", 0x074, 2, 0, 0, 1)
-MUX_CFG_24XX("G4_242X_DMAREQ3", 0x073, 2, 0, 0, 1)
-MUX_CFG_24XX("D3_242X_DMAREQ4", 0x072, 2, 0, 0, 1)
-MUX_CFG_24XX("E3_242X_DMAREQ5", 0x071, 2, 0, 0, 1)
-
-/* UART3 */
-MUX_CFG_24XX("K15_24XX_UART3_TX", 0x118, 0, 0, 0, 1)
-MUX_CFG_24XX("K14_24XX_UART3_RX", 0x119, 0, 0, 0, 1)
-
-/* MMC/SDIO */
-MUX_CFG_24XX("G19_24XX_MMC_CLKO", 0x0f3, 0, 0, 0, 1)
-MUX_CFG_24XX("H18_24XX_MMC_CMD", 0x0f4, 0, 0, 0, 1)
-MUX_CFG_24XX("F20_24XX_MMC_DAT0", 0x0f5, 0, 0, 0, 1)
-MUX_CFG_24XX("H14_24XX_MMC_DAT1", 0x0f6, 0, 0, 0, 1)
-MUX_CFG_24XX("E19_24XX_MMC_DAT2", 0x0f7, 0, 0, 0, 1)
-MUX_CFG_24XX("D19_24XX_MMC_DAT3", 0x0f8, 0, 0, 0, 1)
-MUX_CFG_24XX("F19_24XX_MMC_DAT_DIR0", 0x0f9, 0, 0, 0, 1)
-MUX_CFG_24XX("E20_24XX_MMC_DAT_DIR1", 0x0fa, 0, 0, 0, 1)
-MUX_CFG_24XX("F18_24XX_MMC_DAT_DIR2", 0x0fb, 0, 0, 0, 1)
-MUX_CFG_24XX("E18_24XX_MMC_DAT_DIR3", 0x0fc, 0, 0, 0, 1)
-MUX_CFG_24XX("G18_24XX_MMC_CMD_DIR", 0x0fd, 0, 0, 0, 1)
-MUX_CFG_24XX("H15_24XX_MMC_CLKI", 0x0fe, 0, 0, 0, 1)
-
-/* Full speed USB */
-MUX_CFG_24XX("J20_24XX_USB0_PUEN", 0x11d, 0, 0, 0, 1)
-MUX_CFG_24XX("J19_24XX_USB0_VP", 0x11e, 0, 0, 0, 1)
-MUX_CFG_24XX("K20_24XX_USB0_VM", 0x11f, 0, 0, 0, 1)
-MUX_CFG_24XX("J18_24XX_USB0_RCV", 0x120, 0, 0, 0, 1)
-MUX_CFG_24XX("K19_24XX_USB0_TXEN", 0x121, 0, 0, 0, 1)
-MUX_CFG_24XX("J14_24XX_USB0_SE0", 0x122, 0, 0, 0, 1)
-MUX_CFG_24XX("K18_24XX_USB0_DAT", 0x123, 0, 0, 0, 1)
-
-MUX_CFG_24XX("N14_24XX_USB1_SE0", 0x0ed, 2, 0, 0, 1)
-MUX_CFG_24XX("W12_24XX_USB1_SE0", 0x0dd, 3, 0, 0, 1)
-MUX_CFG_24XX("P15_24XX_USB1_DAT", 0x0ee, 2, 0, 0, 1)
-MUX_CFG_24XX("R13_24XX_USB1_DAT", 0x0e0, 3, 0, 0, 1)
-MUX_CFG_24XX("W20_24XX_USB1_TXEN", 0x0ec, 2, 0, 0, 1)
-MUX_CFG_24XX("P13_24XX_USB1_TXEN", 0x0df, 3, 0, 0, 1)
-MUX_CFG_24XX("V19_24XX_USB1_RCV", 0x0eb, 2, 0, 0, 1)
-MUX_CFG_24XX("V12_24XX_USB1_RCV", 0x0de, 3, 0, 0, 1)
-
-MUX_CFG_24XX("AA10_24XX_USB2_SE0", 0x0e5, 2, 0, 0, 1)
-MUX_CFG_24XX("Y11_24XX_USB2_DAT", 0x0e8, 2, 0, 0, 1)
-MUX_CFG_24XX("AA12_24XX_USB2_TXEN", 0x0e9, 2, 0, 0, 1)
-MUX_CFG_24XX("AA6_24XX_USB2_RCV", 0x0e6, 2, 0, 0, 1)
-MUX_CFG_24XX("AA4_24XX_USB2_TLLSE0", 0x0e7, 2, 0, 0, 1)
-
-/* Keypad GPIO*/
-MUX_CFG_24XX("T19_24XX_KBR0", 0x106, 3, 1, 1, 1)
-MUX_CFG_24XX("R19_24XX_KBR1", 0x107, 3, 1, 1, 1)
-MUX_CFG_24XX("V18_24XX_KBR2", 0x139, 3, 1, 1, 1)
-MUX_CFG_24XX("M21_24XX_KBR3", 0xc9, 3, 1, 1, 1)
-MUX_CFG_24XX("E5__24XX_KBR4", 0x138, 3, 1, 1, 1)
-MUX_CFG_24XX("M18_24XX_KBR5", 0x10e, 3, 1, 1, 1)
-MUX_CFG_24XX("R20_24XX_KBC0", 0x108, 3, 0, 0, 1)
-MUX_CFG_24XX("M14_24XX_KBC1", 0x109, 3, 0, 0, 1)
-MUX_CFG_24XX("H19_24XX_KBC2", 0x114, 3, 0, 0, 1)
-MUX_CFG_24XX("V17_24XX_KBC3", 0x135, 3, 0, 0, 1)
-MUX_CFG_24XX("P21_24XX_KBC4", 0xca, 3, 0, 0, 1)
-MUX_CFG_24XX("L14_24XX_KBC5", 0x10f, 3, 0, 0, 1)
-MUX_CFG_24XX("N19_24XX_KBC6", 0x110, 3, 0, 0, 1)
-
-/* 24xx Menelaus Keypad GPIO */
-MUX_CFG_24XX("B3__24XX_KBR5", 0x30, 3, 1, 1, 1)
-MUX_CFG_24XX("AA4_24XX_KBC2", 0xe7, 3, 0, 0, 1)
-MUX_CFG_24XX("B13_24XX_KBC6", 0x110, 3, 0, 0, 1)
-
-/* 2430 USB */
-MUX_CFG_24XX("AD9_2430_USB0_PUEN", 0x133, 4, 0, 0, 1)
-MUX_CFG_24XX("Y11_2430_USB0_VP", 0x134, 4, 0, 0, 1)
-MUX_CFG_24XX("AD7_2430_USB0_VM", 0x135, 4, 0, 0, 1)
-MUX_CFG_24XX("AE7_2430_USB0_RCV", 0x136, 4, 0, 0, 1)
-MUX_CFG_24XX("AD4_2430_USB0_TXEN", 0x137, 4, 0, 0, 1)
-MUX_CFG_24XX("AF9_2430_USB0_SE0", 0x138, 4, 0, 0, 1)
-MUX_CFG_24XX("AE6_2430_USB0_DAT", 0x139, 4, 0, 0, 1)
-MUX_CFG_24XX("AD24_2430_USB1_SE0", 0x107, 2, 0, 0, 1)
-MUX_CFG_24XX("AB24_2430_USB1_RCV", 0x108, 2, 0, 0, 1)
-MUX_CFG_24XX("Y25_2430_USB1_TXEN", 0x109, 2, 0, 0, 1)
-MUX_CFG_24XX("AA26_2430_USB1_DAT", 0x10A, 2, 0, 0, 1)
-
-/* 2430 HS-USB */
-MUX_CFG_24XX("AD9_2430_USB0HS_DATA3", 0x133, 0, 0, 0, 1)
-MUX_CFG_24XX("Y11_2430_USB0HS_DATA4", 0x134, 0, 0, 0, 1)
-MUX_CFG_24XX("AD7_2430_USB0HS_DATA5", 0x135, 0, 0, 0, 1)
-MUX_CFG_24XX("AE7_2430_USB0HS_DATA6", 0x136, 0, 0, 0, 1)
-MUX_CFG_24XX("AD4_2430_USB0HS_DATA2", 0x137, 0, 0, 0, 1)
-MUX_CFG_24XX("AF9_2430_USB0HS_DATA0", 0x138, 0, 0, 0, 1)
-MUX_CFG_24XX("AE6_2430_USB0HS_DATA1", 0x139, 0, 0, 0, 1)
-MUX_CFG_24XX("AE8_2430_USB0HS_CLK", 0x13A, 0, 0, 0, 1)
-MUX_CFG_24XX("AD8_2430_USB0HS_DIR", 0x13B, 0, 0, 0, 1)
-MUX_CFG_24XX("AE5_2430_USB0HS_STP", 0x13c, 0, 1, 1, 1)
-MUX_CFG_24XX("AE9_2430_USB0HS_NXT", 0x13D, 0, 0, 0, 1)
-MUX_CFG_24XX("AC7_2430_USB0HS_DATA7", 0x13E, 0, 0, 0, 1)
-
-/* 2430 McBSP */
-MUX_CFG_24XX("AD6_2430_MCBSP_CLKS", 0x011E, 0, 0, 0, 1)
-
-MUX_CFG_24XX("AB2_2430_MCBSP1_CLKR", 0x011A, 0, 0, 0, 1)
-MUX_CFG_24XX("AD5_2430_MCBSP1_FSR", 0x011B, 0, 0, 0, 1)
-MUX_CFG_24XX("AA1_2430_MCBSP1_DX", 0x011C, 0, 0, 0, 1)
-MUX_CFG_24XX("AF3_2430_MCBSP1_DR", 0x011D, 0, 0, 0, 1)
-MUX_CFG_24XX("AB3_2430_MCBSP1_FSX", 0x011F, 0, 0, 0, 1)
-MUX_CFG_24XX("Y9_2430_MCBSP1_CLKX", 0x0120, 0, 0, 0, 1)
-
-MUX_CFG_24XX("AC10_2430_MCBSP2_FSX", 0x012E, 1, 0, 0, 1)
-MUX_CFG_24XX("AD16_2430_MCBSP2_CLX", 0x012F, 1, 0, 0, 1)
-MUX_CFG_24XX("AE13_2430_MCBSP2_DX", 0x0130, 1, 0, 0, 1)
-MUX_CFG_24XX("AD13_2430_MCBSP2_DR", 0x0131, 1, 0, 0, 1)
-MUX_CFG_24XX("AC10_2430_MCBSP2_FSX_OFF",0x012E, 0, 0, 0, 1)
-MUX_CFG_24XX("AD16_2430_MCBSP2_CLX_OFF",0x012F, 0, 0, 0, 1)
-MUX_CFG_24XX("AE13_2430_MCBSP2_DX_OFF", 0x0130, 0, 0, 0, 1)
-MUX_CFG_24XX("AD13_2430_MCBSP2_DR_OFF", 0x0131, 0, 0, 0, 1)
-
-MUX_CFG_24XX("AC9_2430_MCBSP3_CLKX", 0x0103, 0, 0, 0, 1)
-MUX_CFG_24XX("AE4_2430_MCBSP3_FSX", 0x0104, 0, 0, 0, 1)
-MUX_CFG_24XX("AE2_2430_MCBSP3_DR", 0x0105, 0, 0, 0, 1)
-MUX_CFG_24XX("AF4_2430_MCBSP3_DX", 0x0106, 0, 0, 0, 1)
-
-MUX_CFG_24XX("N3_2430_MCBSP4_CLKX", 0x010B, 1, 0, 0, 1)
-MUX_CFG_24XX("AD23_2430_MCBSP4_DR", 0x010C, 1, 0, 0, 1)
-MUX_CFG_24XX("AB25_2430_MCBSP4_DX", 0x010D, 1, 0, 0, 1)
-MUX_CFG_24XX("AC25_2430_MCBSP4_FSX", 0x010E, 1, 0, 0, 1)
-
-MUX_CFG_24XX("AE16_2430_MCBSP5_CLKX", 0x00ED, 1, 0, 0, 1)
-MUX_CFG_24XX("AF12_2430_MCBSP5_FSX", 0x00ED, 1, 0, 0, 1)
-MUX_CFG_24XX("K7_2430_MCBSP5_DX", 0x00EF, 1, 0, 0, 1)
-MUX_CFG_24XX("M1_2430_MCBSP5_DR", 0x00F0, 1, 0, 0, 1)
-
-/* 2430 MCSPI1 */
-MUX_CFG_24XX("Y18_2430_MCSPI1_CLK", 0x010F, 0, 0, 0, 1)
-MUX_CFG_24XX("AD15_2430_MCSPI1_SIMO", 0x0110, 0, 0, 0, 1)
-MUX_CFG_24XX("AE17_2430_MCSPI1_SOMI", 0x0111, 0, 0, 0, 1)
-MUX_CFG_24XX("U1_2430_MCSPI1_CS0", 0x0112, 0, 0, 0, 1)
-
-/* Touchscreen GPIO */
-MUX_CFG_24XX("AF19_2430_GPIO_85", 0x0113, 3, 0, 0, 1)
-
-};
-
-#define OMAP24XX_PINS_SZ ARRAY_SIZE(omap24xx_pins)
-
-#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
-
-static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 reg)
-{
- u16 orig;
- u8 warn = 0, debug = 0;
-
- orig = omap_mux_read(cfg->mux_reg - OMAP_MUX_BASE_OFFSET);
-
-#ifdef CONFIG_OMAP_MUX_DEBUG
- debug = cfg->debug;
-#endif
- warn = (orig != reg);
- if (debug || warn)
- printk(KERN_WARNING
- "MUX: setup %s (0x%p): 0x%04x -> 0x%04x\n",
- cfg->name, omap_ctrl_base_get() + cfg->mux_reg,
- orig, reg);
-}
-#else
-#define omap2_cfg_debug(x, y) do {} while (0)
-#endif
-
-static int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg)
-{
- static DEFINE_SPINLOCK(mux_spin_lock);
- unsigned long flags;
- u8 reg = 0;
-
- spin_lock_irqsave(&mux_spin_lock, flags);
- reg |= cfg->mask & 0x7;
- if (cfg->pull_val)
- reg |= OMAP2_PULL_ENA;
- if (cfg->pu_pd_val)
- reg |= OMAP2_PULL_UP;
- omap2_cfg_debug(cfg, reg);
- omap_mux_write(reg, cfg->mux_reg - OMAP_MUX_BASE_OFFSET);
- spin_unlock_irqrestore(&mux_spin_lock, flags);
-
- return 0;
-}
-
-int __init omap2_mux_init(void)
-{
- u32 mux_pbase;
-
- if (cpu_is_omap2420())
- mux_pbase = OMAP2420_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
- else if (cpu_is_omap2430())
- mux_pbase = OMAP243X_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
- else
- return -ENODEV;
-
- mux_base = ioremap(mux_pbase, OMAP_MUX_BASE_SZ);
- if (!mux_base) {
- printk(KERN_ERR "mux: Could not ioremap\n");
- return -ENODEV;
- }
-
- if (cpu_is_omap24xx()) {
- arch_mux_cfg.pins = omap24xx_pins;
- arch_mux_cfg.size = OMAP24XX_PINS_SZ;
- arch_mux_cfg.cfg_reg = omap24xx_cfg_reg;
-
- return omap_mux_register(&arch_mux_cfg);
- }
-
- return 0;
-}
-
-#else
-int __init omap2_mux_init(void)
-{
- return 0;
-}
-#endif /* CONFIG_OMAP_MUX */
-
-/*----------------------------------------------------------------------------*/
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
static LIST_HEAD(muxmodes);
static DEFINE_MUTEX(muxmode_mutex);
@@ -1047,5 +751,3 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
return 0;
}
-#endif /* CONFIG_ARCH_OMAP3 */
-
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index e321281..6aeedea 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -39,7 +39,6 @@
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/control.h>
-#include <plat/mux.h>
#include <plat/dma.h>
#include <plat/board.h>
diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c
index d72d1ac..b11bf38 100644
--- a/arch/arm/mach-omap2/usb-ehci.c
+++ b/arch/arm/mach-omap2/usb-ehci.c
@@ -23,7 +23,6 @@
#include <linux/dma-mapping.h>
#include <asm/io.h>
-#include <plat/mux.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 96f6787..33a5cde 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -28,7 +28,6 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <plat/mux.h>
#include <plat/usb.h>
#ifdef CONFIG_USB_MUSB_SOC
diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h
index c7472a2..e1da7b1 100644
--- a/arch/arm/plat-omap/include/plat/mux.h
+++ b/arch/arm/plat-omap/include/plat/mux.h
@@ -114,28 +114,11 @@
PU_PD_REG(NA, 0) \
},
-#define MUX_CFG_24XX(desc, reg_offset, mode, \
- pull_en, pull_mode, dbg) \
-{ \
- .name = desc, \
- .debug = dbg, \
- .mux_reg = reg_offset, \
- .mask = mode, \
- .pull_val = pull_en, \
- .pu_pd_val = pull_mode, \
-},
-
-/* 24xx/34xx mux bit defines */
-#define OMAP2_PULL_ENA (1 << 3)
-#define OMAP2_PULL_UP (1 << 4)
-#define OMAP2_ALTELECTRICALSEL (1 << 5)
-
struct pin_config {
char *name;
const unsigned int mux_reg;
unsigned char debug;
-#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2)
const unsigned char mask_offset;
const unsigned char mask;
@@ -147,7 +130,6 @@ struct pin_config {
const char *pu_pd_name;
const unsigned int pu_pd_reg;
const unsigned char pu_pd_val;
-#endif
#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
const char *mux_reg_name;
@@ -446,208 +428,6 @@ enum omap1xxx_index {
};
-enum omap24xx_index {
- /* 24xx I2C */
- M19_24XX_I2C1_SCL,
- L15_24XX_I2C1_SDA,
- J15_24XX_I2C2_SCL,
- H19_24XX_I2C2_SDA,
-
- /* 24xx Menelaus interrupt */
- W19_24XX_SYS_NIRQ,
-
- /* 24xx clock */
- W14_24XX_SYS_CLKOUT,
-
- /* 24xx GPMC chipselects, wait pin monitoring */
- E2_GPMC_NCS2,
- L2_GPMC_NCS7,
- L3_GPMC_WAIT0,
- N7_GPMC_WAIT1,
- M1_GPMC_WAIT2,
- P1_GPMC_WAIT3,
-
- /* 242X McBSP */
- Y15_24XX_MCBSP2_CLKX,
- R14_24XX_MCBSP2_FSX,
- W15_24XX_MCBSP2_DR,
- V15_24XX_MCBSP2_DX,
-
- /* 24xx GPIO */
- M21_242X_GPIO11,
- P21_242X_GPIO12,
- AA10_242X_GPIO13,
- AA6_242X_GPIO14,
- AA4_242X_GPIO15,
- Y11_242X_GPIO16,
- AA12_242X_GPIO17,
- AA8_242X_GPIO58,
- Y20_24XX_GPIO60,
- W4__24XX_GPIO74,
- N15_24XX_GPIO85,
- M15_24XX_GPIO92,
- P20_24XX_GPIO93,
- P18_24XX_GPIO95,
- M18_24XX_GPIO96,
- L14_24XX_GPIO97,
- J15_24XX_GPIO99,
- V14_24XX_GPIO117,
- P14_24XX_GPIO125,
-
- /* 242x DBG GPIO */
- V4_242X_GPIO49,
- W2_242X_GPIO50,
- U4_242X_GPIO51,
- V3_242X_GPIO52,
- V2_242X_GPIO53,
- V6_242X_GPIO53,
- T4_242X_GPIO54,
- Y4_242X_GPIO54,
- T3_242X_GPIO55,
- U2_242X_GPIO56,
-
- /* 24xx external DMA requests */
- AA10_242X_DMAREQ0,
- AA6_242X_DMAREQ1,
- E4_242X_DMAREQ2,
- G4_242X_DMAREQ3,
- D3_242X_DMAREQ4,
- E3_242X_DMAREQ5,
-
- /* UART3 */
- K15_24XX_UART3_TX,
- K14_24XX_UART3_RX,
-
- /* MMC/SDIO */
- G19_24XX_MMC_CLKO,
- H18_24XX_MMC_CMD,
- F20_24XX_MMC_DAT0,
- H14_24XX_MMC_DAT1,
- E19_24XX_MMC_DAT2,
- D19_24XX_MMC_DAT3,
- F19_24XX_MMC_DAT_DIR0,
- E20_24XX_MMC_DAT_DIR1,
- F18_24XX_MMC_DAT_DIR2,
- E18_24XX_MMC_DAT_DIR3,
- G18_24XX_MMC_CMD_DIR,
- H15_24XX_MMC_CLKI,
-
- /* Full speed USB */
- J20_24XX_USB0_PUEN,
- J19_24XX_USB0_VP,
- K20_24XX_USB0_VM,
- J18_24XX_USB0_RCV,
- K19_24XX_USB0_TXEN,
- J14_24XX_USB0_SE0,
- K18_24XX_USB0_DAT,
-
- N14_24XX_USB1_SE0,
- W12_24XX_USB1_SE0,
- P15_24XX_USB1_DAT,
- R13_24XX_USB1_DAT,
- W20_24XX_USB1_TXEN,
- P13_24XX_USB1_TXEN,
- V19_24XX_USB1_RCV,
- V12_24XX_USB1_RCV,
-
- AA10_24XX_USB2_SE0,
- Y11_24XX_USB2_DAT,
- AA12_24XX_USB2_TXEN,
- AA6_24XX_USB2_RCV,
- AA4_24XX_USB2_TLLSE0,
-
- /* Keypad GPIO*/
- T19_24XX_KBR0,
- R19_24XX_KBR1,
- V18_24XX_KBR2,
- M21_24XX_KBR3,
- E5__24XX_KBR4,
- M18_24XX_KBR5,
- R20_24XX_KBC0,
- M14_24XX_KBC1,
- H19_24XX_KBC2,
- V17_24XX_KBC3,
- P21_24XX_KBC4,
- L14_24XX_KBC5,
- N19_24XX_KBC6,
-
- /* 24xx Menelaus Keypad GPIO */
- B3__24XX_KBR5,
- AA4_24XX_KBC2,
- B13_24XX_KBC6,
-
- /* 2430 USB */
- AD9_2430_USB0_PUEN,
- Y11_2430_USB0_VP,
- AD7_2430_USB0_VM,
- AE7_2430_USB0_RCV,
- AD4_2430_USB0_TXEN,
- AF9_2430_USB0_SE0,
- AE6_2430_USB0_DAT,
- AD24_2430_USB1_SE0,
- AB24_2430_USB1_RCV,
- Y25_2430_USB1_TXEN,
- AA26_2430_USB1_DAT,
-
- /* 2430 HS-USB */
- AD9_2430_USB0HS_DATA3,
- Y11_2430_USB0HS_DATA4,
- AD7_2430_USB0HS_DATA5,
- AE7_2430_USB0HS_DATA6,
- AD4_2430_USB0HS_DATA2,
- AF9_2430_USB0HS_DATA0,
- AE6_2430_USB0HS_DATA1,
- AE8_2430_USB0HS_CLK,
- AD8_2430_USB0HS_DIR,
- AE5_2430_USB0HS_STP,
- AE9_2430_USB0HS_NXT,
- AC7_2430_USB0HS_DATA7,
-
- /* 2430 McBSP */
- AD6_2430_MCBSP_CLKS,
-
- AB2_2430_MCBSP1_CLKR,
- AD5_2430_MCBSP1_FSR,
- AA1_2430_MCBSP1_DX,
- AF3_2430_MCBSP1_DR,
- AB3_2430_MCBSP1_FSX,
- Y9_2430_MCBSP1_CLKX,
-
- AC10_2430_MCBSP2_FSX,
- AD16_2430_MCBSP2_CLX,
- AE13_2430_MCBSP2_DX,
- AD13_2430_MCBSP2_DR,
- AC10_2430_MCBSP2_FSX_OFF,
- AD16_2430_MCBSP2_CLX_OFF,
- AE13_2430_MCBSP2_DX_OFF,
- AD13_2430_MCBSP2_DR_OFF,
-
- AC9_2430_MCBSP3_CLKX,
- AE4_2430_MCBSP3_FSX,
- AE2_2430_MCBSP3_DR,
- AF4_2430_MCBSP3_DX,
-
- N3_2430_MCBSP4_CLKX,
- AD23_2430_MCBSP4_DR,
- AB25_2430_MCBSP4_DX,
- AC25_2430_MCBSP4_FSX,
-
- AE16_2430_MCBSP5_CLKX,
- AF12_2430_MCBSP5_FSX,
- K7_2430_MCBSP5_DX,
- M1_2430_MCBSP5_DR,
-
- /* 2430 McSPI*/
- Y18_2430_MCSPI1_CLK,
- AD15_2430_MCSPI1_SIMO,
- AE17_2430_MCSPI1_SOMI,
- U1_2430_MCSPI1_CS0,
-
- /* Touchscreen GPIO */
- AF19_2430_GPIO_85,
-
-};
-
struct omap_mux_cfg {
struct pin_config *pins;
unsigned long size;
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 0670363..0d4aa0d 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -54,7 +54,7 @@ int __init_or_module omap_cfg_reg(const unsigned long index)
{
struct pin_config *reg;
- if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
+ if (!cpu_class_is_omap1()) {
printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n",
index);
WARN_ON(1);
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 14/16] omap: mux: Mux 2430 USB0HS_STP in board-2430.c
2010-06-30 12:07 ` [PATCH 14/16] omap: mux: Mux 2430 USB0HS_STP in board-2430.c Tony Lindgren
@ 2010-06-30 12:28 ` Felipe Balbi
2010-06-30 12:40 ` Tony Lindgren
0 siblings, 1 reply; 23+ messages in thread
From: Felipe Balbi @ 2010-06-30 12:28 UTC (permalink / raw)
To: linux-arm-kernel
hi,
On Wed, Jun 30, 2010 at 02:07:23PM +0200, ext Tony Lindgren wrote:
>diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
>index e06d65e..5f04d3f 100644
>--- a/drivers/usb/musb/omap2430.c
>+++ b/drivers/usb/musb/omap2430.c
>@@ -194,10 +194,6 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
> u32 l;
> struct omap_musb_board_data *data = board_data;
>
>-#if defined(CONFIG_ARCH_OMAP2430)
>- omap_cfg_reg(AE5_2430_USB0HS_STP);
>-#endif
there's a patch from Anand taking care of this hunk, could you send only
the hunk on board-2430sdp.c ?
this part on omap2430.c will go on next merge window.
--
balbi
DefectiveByDesign.org
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 14/16] omap: mux: Mux 2430 USB0HS_STP in board-2430.c
2010-06-30 12:28 ` Felipe Balbi
@ 2010-06-30 12:40 ` Tony Lindgren
0 siblings, 0 replies; 23+ messages in thread
From: Tony Lindgren @ 2010-06-30 12:40 UTC (permalink / raw)
To: linux-arm-kernel
* Felipe Balbi <felipe.balbi@nokia.com> [100630 15:26]:
> hi,
>
> On Wed, Jun 30, 2010 at 02:07:23PM +0200, ext Tony Lindgren wrote:
> >diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
> >index e06d65e..5f04d3f 100644
> >--- a/drivers/usb/musb/omap2430.c
> >+++ b/drivers/usb/musb/omap2430.c
> >@@ -194,10 +194,6 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
> > u32 l;
> > struct omap_musb_board_data *data = board_data;
> >
> >-#if defined(CONFIG_ARCH_OMAP2430)
> >- omap_cfg_reg(AE5_2430_USB0HS_STP);
> >-#endif
>
> there's a patch from Anand taking care of this hunk, could you send
> only the hunk on board-2430sdp.c ?
>
> this part on omap2430.c will go on next merge window.
OK, updated patch below.
Regards,
Tony
-------------- next part --------------
A non-text attachment was scrubbed...
Name: musb-2430-musb.patch
Type: text/x-diff
Size: 1071 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20100630/c18eef74/attachment.bin>
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 13/16] omap: mux: Mux Apollon LCD power in board-apollon.c
2010-06-30 12:07 ` [PATCH 13/16] omap: mux: Mux Apollon LCD power in board-apollon.c Tony Lindgren
@ 2010-07-01 7:05 ` Tomi Valkeinen
2010-07-01 8:18 ` Kyungmin Park
0 siblings, 1 reply; 23+ messages in thread
From: Tomi Valkeinen @ 2010-07-01 7:05 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, 2010-06-30 at 14:07 +0200, ext Tony Lindgren wrote:
> Use the new mux function for that.
>
> Cc: Kyungmin Park <kyungmin.park@samsung.com>
> Cc: Tomi Valkeinen <tomi.valkeinen@nokia.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---
> arch/arm/mach-omap2/board-apollon.c | 3 +++
> drivers/video/omap/lcd_apollon.c | 3 ---
> 2 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
> index b86a879..bc67026 100644
> --- a/arch/arm/mach-omap2/board-apollon.c
> +++ b/arch/arm/mach-omap2/board-apollon.c
> @@ -332,6 +332,9 @@ static void __init omap_apollon_init(void)
> /* REVISIT: where's the correct place */
> omap_cfg_reg(W19_24XX_SYS_NIRQ);
>
> + /* LCD PWR_EN */
> + omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
LCD_PWR_EN sounds like output pin. However, I don't see lcd_apollon.c
nor board-apollon.c set the gpio.
I don't know what omap_cfg_reg(M21_242X_GPIO11) does, but if it does the
same thing as the line above, then does the apollon LCD work by luck?
OMAP pulling the line up, and by chance the pull is stronger than the
LCDs (possible) pull down, and thus the LCD is powered up...
Tomi
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 13/16] omap: mux: Mux Apollon LCD power in board-apollon.c
2010-07-01 7:05 ` Tomi Valkeinen
@ 2010-07-01 8:18 ` Kyungmin Park
2010-07-01 10:33 ` Tony Lindgren
0 siblings, 1 reply; 23+ messages in thread
From: Kyungmin Park @ 2010-07-01 8:18 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
This value is set from bootloader, and kernel side only change the mode.
Right it runs by luck.
Thank you,
Kyungmin Park
> -----Original Message-----
> From: Tomi Valkeinen [mailto:tomi.valkeinen at nokia.com]
> Sent: Thursday, July 01, 2010 4:06 PM
> To: ext Tony Lindgren
> Cc: linux-arm-kernel at lists.infradead.org; Kyungmin Park; linux-
> omap at vger.kernel.org
> Subject: Re: [PATCH 13/16] omap: mux: Mux Apollon LCD power in board-
> apollon.c
>
> On Wed, 2010-06-30 at 14:07 +0200, ext Tony Lindgren wrote:
> > Use the new mux function for that.
> >
> > Cc: Kyungmin Park <kyungmin.park@samsung.com>
> > Cc: Tomi Valkeinen <tomi.valkeinen@nokia.com>
> > Signed-off-by: Tony Lindgren <tony@atomide.com>
> > ---
> > arch/arm/mach-omap2/board-apollon.c | 3 +++
> > drivers/video/omap/lcd_apollon.c | 3 ---
> > 2 files changed, 3 insertions(+), 3 deletions(-)
> >
> > diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-
> omap2/board-apollon.c
> > index b86a879..bc67026 100644
> > --- a/arch/arm/mach-omap2/board-apollon.c
> > +++ b/arch/arm/mach-omap2/board-apollon.c
> > @@ -332,6 +332,9 @@ static void __init omap_apollon_init(void)
> > /* REVISIT: where's the correct place */
> > omap_cfg_reg(W19_24XX_SYS_NIRQ);
> >
> > + /* LCD PWR_EN */
> > + omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA |
> OMAP_PULL_UP);
>
> LCD_PWR_EN sounds like output pin. However, I don't see lcd_apollon.c
> nor board-apollon.c set the gpio.
>
> I don't know what omap_cfg_reg(M21_242X_GPIO11) does, but if it does the
> same thing as the line above, then does the apollon LCD work by luck?
> OMAP pulling the line up, and by chance the pull is stronger than the
> LCDs (possible) pull down, and thus the LCD is powered up...
>
> Tomi
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 13/16] omap: mux: Mux Apollon LCD power in board-apollon.c
2010-07-01 8:18 ` Kyungmin Park
@ 2010-07-01 10:33 ` Tony Lindgren
2010-07-01 10:41 ` Kyungmin Park
0 siblings, 1 reply; 23+ messages in thread
From: Tony Lindgren @ 2010-07-01 10:33 UTC (permalink / raw)
To: linux-arm-kernel
* Kyungmin Park <kyungmin.park@samsung.com> [100701 11:12]:
> Hi,
>
> This value is set from bootloader, and kernel side only change the mode.
> Right it runs by luck.
So should we just drop the omap_cfg_reg for now, then add it back
later with proper gpio_request etc?
Tony
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 13/16] omap: mux: Mux Apollon LCD power in board-apollon.c
2010-07-01 10:33 ` Tony Lindgren
@ 2010-07-01 10:41 ` Kyungmin Park
0 siblings, 0 replies; 23+ messages in thread
From: Kyungmin Park @ 2010-07-01 10:41 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Jul 1, 2010 at 7:33 PM, Tony Lindgren <tony@atomide.com> wrote:
> * Kyungmin Park <kyungmin.park@samsung.com> [100701 11:12]:
>> Hi,
>>
>> This value is set from bootloader, and kernel side only change the mode.
>> Right it runs by luck.
>
> So should we just drop the omap_cfg_reg for now, then add it back
> later with proper gpio_request etc?
I mean the original patch is okay. Now that's find. I'll send a patch
if require.
Thank you,
Kyungmin Park
^ permalink raw reply [flat|nested] 23+ messages in thread
end of thread, other threads:[~2010-07-01 10:41 UTC | newest]
Thread overview: 23+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-06-30 12:06 [PATCH 00/16] omap mux updates for 2.6.36 merge window Tony Lindgren
2010-06-30 12:06 ` [PATCH 01/16] omap: mux: Fix omap_mux_init_gpio for omap24xx Tony Lindgren
2010-06-30 12:06 ` [PATCH 02/16] omap: mux: Renumber package defines to make room for older 24xx packages Tony Lindgren
2010-06-30 12:06 ` [PATCH 03/16] omap: mux: Allow compiling in new mux code on all mach-omap2 systems Tony Lindgren
2010-06-30 12:06 ` [PATCH 04/16] omap: mux: Remove unncessary parens from mux34xx.c Tony Lindgren
2010-06-30 12:06 ` [PATCH 05/16] omap: mux: Add data for 2420 Tony Lindgren
2010-06-30 12:06 ` [PATCH 06/16] omap: mux: Add data for 2430 Tony Lindgren
2010-06-30 12:06 ` [PATCH 07/16] omap: mux: Select SIP package for H4 Tony Lindgren
2010-06-30 12:06 ` [PATCH 08/16] omap: mux: Select POP package for Apollon Tony Lindgren
2010-06-30 12:07 ` [PATCH 09/16] omap: mux: Select POP package for N8X0 Tony Lindgren
2010-06-30 12:07 ` [PATCH 10/16] omap: mux: Select POP package for 2430SDP Tony Lindgren
2010-06-30 12:07 ` [PATCH 11/16] omap: mux: Make omap2 FS USB code use new mux functions Tony Lindgren
2010-06-30 12:07 ` [PATCH 12/16] omap: mux: Do keypad muxing in board-*.c files Tony Lindgren
2010-06-30 12:07 ` [PATCH 13/16] omap: mux: Mux Apollon LCD power in board-apollon.c Tony Lindgren
2010-07-01 7:05 ` Tomi Valkeinen
2010-07-01 8:18 ` Kyungmin Park
2010-07-01 10:33 ` Tony Lindgren
2010-07-01 10:41 ` Kyungmin Park
2010-06-30 12:07 ` [PATCH 14/16] omap: mux: Mux 2430 USB0HS_STP in board-2430.c Tony Lindgren
2010-06-30 12:28 ` Felipe Balbi
2010-06-30 12:40 ` Tony Lindgren
2010-06-30 12:07 ` [PATCH 15/16] omap: mux: Convert 2420 platform init code to use new mux code Tony Lindgren
2010-06-30 12:07 ` [PATCH 16/16] omap: mux: Remove old " Tony Lindgren
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).