From: paul@pwsan.com (Paul Walmsley)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 10/20] OMAP4: hwmod: Enable omap_device build for OMAP4
Date: Fri, 02 Jul 2010 09:29:27 -0600 [thread overview]
Message-ID: <20100702152925.6221.36970.stgit@localhost.localdomain> (raw)
In-Reply-To: <20100702152703.6221.33529.stgit@localhost.localdomain>
From: Rajendra Nayak <rnayak@ti.com>
Enable omap_device layer support for OMAP4, so that drivers can
use them to enable/idle/shutdown devices.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/plat-omap/Makefile | 1 +
2 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 6c6d7c6..2fa3418 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -15,7 +15,7 @@ clock-common = clock.o clock_common_data.o \
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(hwmod-common)
-obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common)
+obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common) $(hwmod-common)
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 98f0191..9405831 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
# omap_device support (OMAP2+ only at the moment)
obj-$(CONFIG_ARCH_OMAP2) += omap_device.o
obj-$(CONFIG_ARCH_OMAP3) += omap_device.o
+obj-$(CONFIG_ARCH_OMAP4) += omap_device.o
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o
next prev parent reply other threads:[~2010-07-02 15:29 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-02 15:29 [PATCH 00/20] OMAP: clock, hwmod, omap_device, PM constraints: patches for 2.6.36 Paul Walmsley
2010-07-02 15:29 ` [PATCH 01/20] OMAP3: wait on IDLEST after enabling USBTLL fclk Paul Walmsley
2010-07-02 15:29 ` [PATCH 02/20] OMAP: clock: add kerneldoc for structures; move flags closer to structs Paul Walmsley
2010-07-02 15:29 ` [PATCH 03/20] OMAP1: OPP: add KConfig entry for 96MHz ARM rate (using a 12MHz oscillator) Paul Walmsley
2010-07-02 15:29 ` [PATCH 04/20] OMAP1: clock: some cleanup Paul Walmsley
2010-07-02 15:29 ` [PATCH 05/20] OMAP24xx: CM: fix mask used for checking IDLEST status Paul Walmsley
2010-07-02 15:29 ` [PATCH 06/20] OMAP2/3: hwmod: L3 and L4 CORE/PER/WKUP hwmods don't have IDLEST Paul Walmsley
2010-07-02 15:29 ` [PATCH 07/20] OMAP2&3: hwmod: Remove _hwmod prefix in name string Paul Walmsley
2010-07-02 15:29 ` [PATCH 08/20] OMAP: hwmod: add non-locking versions of enable and idle functions Paul Walmsley
2010-07-02 15:29 ` [PATCH 09/20] OMAP: hwmod: allow omap_hwmod_late_init() caller to skip module idle in _setup() Paul Walmsley
2010-07-02 15:29 ` Paul Walmsley [this message]
2010-07-02 15:29 ` [PATCH 11/20] OMAP: omap_device: ensure hwmod tracks attached omap_device pointer Paul Walmsley
2010-07-02 15:29 ` [PATCH 12/20] OMAP: PM: create omap_devices for MPU, DSP, L3 Paul Walmsley
2010-07-15 5:25 ` Gopinath, Thara
2010-07-24 6:43 ` Gopinath, Thara
2010-07-27 7:22 ` Paul Walmsley
2010-07-27 7:37 ` Basak, Partha
2010-07-27 8:14 ` Gopinath, Thara
2010-07-02 15:29 ` [PATCH 13/20] OMAP: hwmod data: add class for IVA hwmods Paul Walmsley
2010-07-02 15:29 ` [PATCH 14/20] OMAP2&3: hwmod: Replace l3 -> l3_main Paul Walmsley
2010-07-02 15:29 ` [PATCH 15/20] OMAP3: hwmod data: add data for OMAP3 IVA2 Paul Walmsley
2010-07-02 15:29 ` [PATCH 16/20] OMAP2: hwmod data: add IVA1 (2420), IVA2 (2430) hwmods Paul Walmsley
2010-07-02 15:29 ` [PATCH 17/20] OMAP: hwmod/device: add omap_{device, hwmod}_get_mpu_rt_va Paul Walmsley
2010-07-03 9:21 ` Shilimkar, Santosh
2010-07-02 15:29 ` [PATCH 18/20] OMAP2+: hwmod/device: update documentation and copyright Paul Walmsley
2010-07-02 15:29 ` [PATCH 19/20] OMAP: PM constraints: add return values; add requesting device param to omap_pm_set_max_dev_wakeup_lat() Paul Walmsley
2010-07-02 15:30 ` [PATCH 20/20] OMAP: PM constraints: add omap_pm_set_min_clk_rate() Paul Walmsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100702152925.6221.36970.stgit@localhost.localdomain \
--to=paul@pwsan.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).