linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: paul@pwsan.com (Paul Walmsley)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 17/20] OMAP: hwmod/device: add omap_{device, hwmod}_get_mpu_rt_va
Date: Fri, 02 Jul 2010 09:29:48 -0600	[thread overview]
Message-ID: <20100702152943.6221.96850.stgit@localhost.localdomain> (raw)
In-Reply-To: <20100702152703.6221.33529.stgit@localhost.localdomain>

Add omap_device_get_mpu_rt_va().  This is intended to be used by
device drivers (currently, via a struct platform_data function
pointer) to retrieve their corresponding device's virtual base address
that the MPU should use to access the device.  This is needed because
the omap_hwmod code does its own ioremap(), in order to gain access to
the module's OCP_SYSCONFIG register.

Add omap_hwmod_get_mpu_rt_va().  omap_device_get_mpu_rt_va() calls this
function to do the real work.

While here, rename struct omap_hwmod._rt_va to struct
omap_hwmod._mpu_rt_va, to reinforce that it refers to the MPU's
register target virtual address base (as opposed to, for example, the
L3's).

In the future, this belongs as a function in an omap_bus, so it is not
necessary to call this through a platform_data function pointer.

The use-case for this function was originally presented by Santosh
Shilimkar <santosh.shilimkar@ti.com>.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod.c              |   33 +++++++++++++++++++++----
 arch/arm/plat-omap/include/plat/omap_device.h |    2 ++
 arch/arm/plat-omap/include/plat/omap_hwmod.h  |    7 +++--
 arch/arm/plat-omap/omap_device.c              |   19 ++++++++++++++
 4 files changed, 53 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index d9e96fa..b012057 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1,7 +1,7 @@
 /*
  * omap_hwmod implementation for OMAP2/3/4
  *
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009-2010 Nokia Corporation
  *
  * Paul Walmsley, Beno?t Cousson, Kevin Hilman
  *
@@ -1066,12 +1066,12 @@ static int _setup(struct omap_hwmod *oh, void *data)
 
 u32 omap_hwmod_readl(struct omap_hwmod *oh, u16 reg_offs)
 {
-	return __raw_readl(oh->_rt_va + reg_offs);
+	return __raw_readl(oh->_mpu_rt_va + reg_offs);
 }
 
 void omap_hwmod_writel(u32 v, struct omap_hwmod *oh, u16 reg_offs)
 {
-	__raw_writel(v, oh->_rt_va + reg_offs);
+	__raw_writel(v, oh->_mpu_rt_va + reg_offs);
 }
 
 int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode)
@@ -1128,7 +1128,7 @@ int omap_hwmod_register(struct omap_hwmod *oh)
 	ms_id = _find_mpu_port_index(oh);
 	if (!IS_ERR_VALUE(ms_id)) {
 		oh->_mpu_port_index = ms_id;
-		oh->_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index);
+		oh->_mpu_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index);
 	} else {
 		oh->_int_flags |= _HWMOD_NO_MPU_PORT;
 	}
@@ -1280,7 +1280,7 @@ int omap_hwmod_unregister(struct omap_hwmod *oh)
 	pr_debug("omap_hwmod: %s: unregistering\n", oh->name);
 
 	mutex_lock(&omap_hwmod_mutex);
-	iounmap(oh->_rt_va);
+	iounmap(oh->_mpu_rt_va);
 	list_del(&oh->node);
 	mutex_unlock(&omap_hwmod_mutex);
 
@@ -1541,6 +1541,29 @@ struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh)
 }
 
 /**
+ * omap_hwmod_get_mpu_rt_va - return the module's base address (for the MPU)
+ * @oh: struct omap_hwmod *
+ *
+ * Returns the virtual address corresponding to the beginning of the
+ * module's register target, in the address range that is intended to
+ * be used by the MPU.  Returns the virtual address upon success or NULL
+ * upon error.
+ */
+void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh)
+{
+	if (!oh)
+		return NULL;
+
+	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
+		return NULL;
+
+	if (oh->_state == _HWMOD_STATE_UNKNOWN)
+		return NULL;
+
+	return oh->_mpu_rt_va;
+}
+
+/**
  * omap_hwmod_add_initiator_dep - add sleepdep from @init_oh to @oh
  * @oh: struct omap_hwmod *
  * @init_oh: struct omap_hwmod * (initiator)
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index 3694b62..25cd9ac 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -101,6 +101,8 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
 int omap_device_register(struct omap_device *od);
 int omap_early_device_register(struct omap_device *od);
 
+void __iomem *omap_device_get_rt_va(struct omap_device *od);
+
 /* OMAP PM interface */
 int omap_device_align_pm_lat(struct platform_device *pdev,
 			     u32 new_wakeup_lat_limit);
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index aebfacb..a4e508d 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -1,7 +1,7 @@
 /*
  * omap_hwmod macros, structures
  *
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009-2010 Nokia Corporation
  * Paul Walmsley
  *
  * Created in collaboration with (alphabetical order): Beno?t Cousson,
@@ -419,7 +419,7 @@ struct omap_hwmod_class {
  * @slaves: ptr to array of OCP ifs that this hwmod can respond on
  * @dev_attr: arbitrary device attributes that can be passed to the driver
  * @_sysc_cache: internal-use hwmod flags
- * @_rt_va: cached register target start address (internal use)
+ * @_mpu_rt_va: cached register target start address (internal use)
  * @_mpu_port_index: cached MPU register target slave ID (internal use)
  * @msuspendmux_reg_id: CONTROL_MSUSPENDMUX register ID (1-6)
  * @msuspendmux_shift: CONTROL_MSUSPENDMUX register bit shift
@@ -460,7 +460,7 @@ struct omap_hwmod {
 	struct omap_hwmod_ocp_if	**slaves;  /* connect to *_TA */
 	void				*dev_attr;
 	u32				_sysc_cache;
-	void __iomem			*_rt_va;
+	void __iomem			*_mpu_rt_va;
 	struct list_head		node;
 	u16				flags;
 	u8				_mpu_port_index;
@@ -507,6 +507,7 @@ int omap_hwmod_count_resources(struct omap_hwmod *oh);
 int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
 
 struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh);
+void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh);
 
 int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
 				 struct omap_hwmod *init_oh);
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index f9dec0d..dee4629 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -655,6 +655,25 @@ struct powerdomain *omap_device_get_pwrdm(struct omap_device *od)
 	return omap_hwmod_get_pwrdm(od->hwmods[0]);
 }
 
+/**
+ * omap_device_get_mpu_rt_va - return the MPU's virtual addr for the hwmod base
+ * @od: struct omap_device *
+ *
+ * Return the MPU's virtual address for the base of the hwmod, from
+ * the ioremap() that the hwmod code does.  Only valid if there is one
+ * hwmod associated with this device.  Returns NULL if there are zero
+ * or more than one hwmods associated with this omap_device;
+ * otherwise, passes along the return value from
+ * omap_hwmod_get_mpu_rt_va().
+ */
+void __iomem *omap_device_get_rt_va(struct omap_device *od)
+{
+	if (od->hwmods_cnt != 1)
+		return NULL;
+
+	return omap_hwmod_get_mpu_rt_va(od->hwmods[0]);
+}
+
 /*
  * Public functions intended for use in omap_device_pm_latency
  * .activate_func and .deactivate_func function pointers

  parent reply	other threads:[~2010-07-02 15:29 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-07-02 15:29 [PATCH 00/20] OMAP: clock, hwmod, omap_device, PM constraints: patches for 2.6.36 Paul Walmsley
2010-07-02 15:29 ` [PATCH 01/20] OMAP3: wait on IDLEST after enabling USBTLL fclk Paul Walmsley
2010-07-02 15:29 ` [PATCH 02/20] OMAP: clock: add kerneldoc for structures; move flags closer to structs Paul Walmsley
2010-07-02 15:29 ` [PATCH 03/20] OMAP1: OPP: add KConfig entry for 96MHz ARM rate (using a 12MHz oscillator) Paul Walmsley
2010-07-02 15:29 ` [PATCH 04/20] OMAP1: clock: some cleanup Paul Walmsley
2010-07-02 15:29 ` [PATCH 05/20] OMAP24xx: CM: fix mask used for checking IDLEST status Paul Walmsley
2010-07-02 15:29 ` [PATCH 06/20] OMAP2/3: hwmod: L3 and L4 CORE/PER/WKUP hwmods don't have IDLEST Paul Walmsley
2010-07-02 15:29 ` [PATCH 07/20] OMAP2&3: hwmod: Remove _hwmod prefix in name string Paul Walmsley
2010-07-02 15:29 ` [PATCH 08/20] OMAP: hwmod: add non-locking versions of enable and idle functions Paul Walmsley
2010-07-02 15:29 ` [PATCH 09/20] OMAP: hwmod: allow omap_hwmod_late_init() caller to skip module idle in _setup() Paul Walmsley
2010-07-02 15:29 ` [PATCH 10/20] OMAP4: hwmod: Enable omap_device build for OMAP4 Paul Walmsley
2010-07-02 15:29 ` [PATCH 11/20] OMAP: omap_device: ensure hwmod tracks attached omap_device pointer Paul Walmsley
2010-07-02 15:29 ` [PATCH 12/20] OMAP: PM: create omap_devices for MPU, DSP, L3 Paul Walmsley
2010-07-15  5:25   ` Gopinath, Thara
2010-07-24  6:43     ` Gopinath, Thara
2010-07-27  7:22       ` Paul Walmsley
2010-07-27  7:37   ` Basak, Partha
2010-07-27  8:14     ` Gopinath, Thara
2010-07-02 15:29 ` [PATCH 13/20] OMAP: hwmod data: add class for IVA hwmods Paul Walmsley
2010-07-02 15:29 ` [PATCH 14/20] OMAP2&3: hwmod: Replace l3 -> l3_main Paul Walmsley
2010-07-02 15:29 ` [PATCH 15/20] OMAP3: hwmod data: add data for OMAP3 IVA2 Paul Walmsley
2010-07-02 15:29 ` [PATCH 16/20] OMAP2: hwmod data: add IVA1 (2420), IVA2 (2430) hwmods Paul Walmsley
2010-07-02 15:29 ` Paul Walmsley [this message]
2010-07-03  9:21   ` [PATCH 17/20] OMAP: hwmod/device: add omap_{device, hwmod}_get_mpu_rt_va Shilimkar, Santosh
2010-07-02 15:29 ` [PATCH 18/20] OMAP2+: hwmod/device: update documentation and copyright Paul Walmsley
2010-07-02 15:29 ` [PATCH 19/20] OMAP: PM constraints: add return values; add requesting device param to omap_pm_set_max_dev_wakeup_lat() Paul Walmsley
2010-07-02 15:30 ` [PATCH 20/20] OMAP: PM constraints: add omap_pm_set_min_clk_rate() Paul Walmsley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100702152943.6221.96850.stgit@localhost.localdomain \
    --to=paul@pwsan.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).