From: pieterg@gmx.com (pieterg)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 5/5] colibri-pxa3xx: add touchscreen support
Date: Fri, 9 Jul 2010 09:03:50 +0200 [thread overview]
Message-ID: <201007090903.50318.pieterg@gmx.com> (raw)
In-Reply-To: <201007090103.14418.marek.vasut@gmail.com>
On Friday 09 July 2010 01:03:14 Marek Vasut wrote:
> Dne ?t 8. ?ervence 2010 22:49:59 pieterg napsal(a):
> > Signed-off-by: pieter <p.grimmerink@inepro.com>
> > ---
> > arch/arm/mach-pxa/colibri-pxa300.c | 2 +
> > arch/arm/mach-pxa/colibri-pxa320.c | 1 +
> > arch/arm/mach-pxa/colibri-pxa3xx.c | 31
> > ++++++++++++++++++++++++++++++
> > arch/arm/mach-pxa/include/mach/colibri.h | 6 +++++
> > 4 files changed, 40 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/mach-pxa/colibri-pxa300.c
> > b/arch/arm/mach-pxa/colibri-pxa300.c
> > index 27f403d..3e50466 100644
> > --- a/arch/arm/mach-pxa/colibri-pxa300.c
> > +++ b/arch/arm/mach-pxa/colibri-pxa300.c
> > @@ -229,6 +229,8 @@ void __init colibri_pxa300_init(void)
> > mfp_to_gpio(MFP_PIN_GPIO13));
> > colibri_pxa300_init_uart();
> > colibri_pxa300_init_i2c();
> > + if (cpu_is_pxa310())
> > + colibri_pxa3xx_init_touchscreen();
> > }
> >
> > MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
> > diff --git a/arch/arm/mach-pxa/colibri-pxa320.c
> > b/arch/arm/mach-pxa/colibri-pxa320.c
> > index 0755087..43fadf6 100644
> > --- a/arch/arm/mach-pxa/colibri-pxa320.c
> > +++ b/arch/arm/mach-pxa/colibri-pxa320.c
> > @@ -229,6 +229,7 @@ void __init colibri_pxa320_init(void)
> > mfp_to_gpio(MFP_PIN_GPIO28));
> > colibri_pxa320_init_uart();
> > colibri_pxa320_init_i2c();
> > + colibri_pxa3xx_init_touchscreen();
> > }
> >
> > MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
> > diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c
> > b/arch/arm/mach-pxa/colibri-pxa3xx.c
> > index 199afa2..097aef5 100644
> > --- a/arch/arm/mach-pxa/colibri-pxa3xx.c
> > +++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
> > @@ -198,3 +198,34 @@ void __init colibri_pxa3xx_init_nand(void)
> > }
> > #endif
> >
> > +#if defined(CONFIG_INPUT_TOUCHSCREEN)
> > +
> > +#if defined(CONFIG_TOUCHSCREEN_WM97XX) || \
> > + defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
> > +static struct platform_device colibri_ts_wm97xx_device = {
> > + .name = "wm97xx-ts",
> > + .id = -1,
> > +};
> > +#endif
> > +
> > +#if defined(CONFIG_TOUCHSCREEN_UCB1400) || \
> > + defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
> > +static struct platform_device colibri_ts_ucb1400_device = {
> > + .name = "ucb1400_core",
> > + .id = -1,
> > +};
> > +#endif
> > +
> > +void __init colibri_pxa3xx_init_touchscreen(void)
> > +{
> > +#if defined(CONFIG_TOUCHSCREEN_WM97XX) || \
> > + defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
> > + platform_device_register(&colibri_ts_wm97xx_device);
> > +#endif
> > +#if defined(CONFIG_TOUCHSCREEN_UCB1400) || \
> > + defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
> > + platform_device_register(&colibri_ts_ucb1400_device);
> > +#endif
> > +}
> > +
> > +#endif
> > diff --git a/arch/arm/mach-pxa/include/mach/colibri.h
> > b/arch/arm/mach-pxa/include/mach/colibri.h
> > index 5f2ba8d..299dab9 100644
> > --- a/arch/arm/mach-pxa/include/mach/colibri.h
> > +++ b/arch/arm/mach-pxa/include/mach/colibri.h
> > @@ -30,6 +30,12 @@ extern void colibri_pxa3xx_init_nand(void);
> > static inline void colibri_pxa3xx_init_nand(void) {}
> > #endif
> >
> > +#if defined(CONFIG_INPUT_TOUCHSCREEN)
> > +extern void colibri_pxa3xx_init_touchscreen(void);
> > +#else
> > +static inline void colibri_pxa3xx_init_touchscreen(void) {}
> > +#endif
> > +
> > /* physical memory regions */
> > #define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */
>
> What will happen if both of the TS devices are selected?
That's no problem.
I actually have both configs enabled, so I can run the same kernel on the
310 (which is using wm97 for a while now) and the 320 (which still has
ucb1400 at the moment)
Rgds, Pieter
next prev parent reply other threads:[~2010-07-09 7:03 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-08 20:49 [PATCH v2 5/5] colibri-pxa3xx: add touchscreen support pieterg
2010-07-08 23:03 ` Marek Vasut
2010-07-09 7:03 ` pieterg [this message]
2010-07-09 13:32 ` Marek Vasut
2010-07-09 16:14 ` Arnd Bergmann
2010-07-09 16:47 ` pieterg
2010-07-09 16:53 ` Arnd Bergmann
2010-07-09 17:21 ` pieterg
2010-07-09 17:25 ` Arnd Bergmann
2010-07-09 7:18 ` Daniel Mack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201007090903.50318.pieterg@gmx.com \
--to=pieterg@gmx.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).