From mboxrd@z Thu Jan  1 00:00:00 1970
From: zpfeffer@codeaurora.org (Zach Pfeffer)
Date: Tue, 13 Jul 2010 05:14:21 -0700
Subject: [RFC 1/3 v3] mm: iommu: An API to unify IOMMU, CPU and device
	memory management
In-Reply-To: <20100713150311B.fujita.tomonori@lab.ntt.co.jp>
References: <4C366678.60605@codeaurora.org>
	<20100712102435B.fujita.tomonori@lab.ntt.co.jp>
	<4C3C0032.5020702@codeaurora.org>
	<20100713150311B.fujita.tomonori@lab.ntt.co.jp>
Message-ID: <20100713121420.GB4263@codeaurora.org>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Tue, Jul 13, 2010 at 03:03:25PM +0900, FUJITA Tomonori wrote:
> On Mon, 12 Jul 2010 22:57:06 -0700
> Zach Pfeffer <zpfeffer@codeaurora.org> wrote:
> 
> > FUJITA Tomonori wrote:
> > > On Thu, 08 Jul 2010 16:59:52 -0700
> > > Zach Pfeffer <zpfeffer@codeaurora.org> wrote:
> > > 
> > >> The problem I'm trying to solve boils down to this: map a set of
> > >> contiguous physical buffers to an aligned IOMMU address. I need to
> > >> allocate the set of physical buffers in a particular way: use 1 MB
> > >> contiguous physical memory, then 64 KB, then 4 KB, etc. and I need to
> > >> align the IOMMU address in a particular way.
> > > 
> > > Sounds like the DMA API already supports what you want.
> > > 
> > > You can set segment_boundary_mask in struct device_dma_parameters if
> > > you want to align the IOMMU address. See IOMMU implementations that
> > > support dma_get_seg_boundary() properly.
> > 
> > That function takes the wrong argument in a VCM world:
> > 
> > unsigned long dma_get_seg_boundary(struct device *dev);
> > 
> > The boundary should be an attribute of the device side mapping,
> > independent of the device. This would allow better code reuse.
> 
> You mean that you want to specify this alignment attribute every time
> you create an IOMMU mapping? Then you can set segment_boundary_mask
> every time you create an IOMMU mapping. It's odd but it should work.

Kinda. I want to forget about IOMMUs, devices and CPUs. I just want to
create a mapping that has the alignment I specify, regardless of the
mapper. The mapping is created on a VCM and the VCM is associated with
a mapper: a CPU, an IOMMU'd device or a direct mapped device.

> 
> Another possible solution is extending struct dma_attrs. We could add
> the alignment attribute to it.

That may be useful, but in the current DMA-API may be seen as
redundant info.

--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.