[PATCH 0/6] debug macro fixups

[PATCH 0/6] debug macro fixups

[Jeremy Kerr]

As part of the DEBUG_LL mapping changes, I ran all of the defconfigs
with DEBUG_LL=y. Some of the configs are broken, so I'm posting the
fixups.

mx1 is still broken, as IMX_IO_ADDRESS() (used by the mx1 debug macros)
uses C syntax, and so it not suitable for asm.

These changes are on top of the DEBUG_LL mapping changes.

Cheers,


Jeremy

---
Jeremy Kerr (6):
      arm/clps711x: fix debug macro compilation failure
      arm/h720x: fix debug macro compilation failure
      arm/l7200: fix debug macro compilation failure
      arm/plat-spear: fix debug macro compilation failure
      arm/ns9xxx: fix debug macro compilation failure
      arm/shark: fix debug macro compilation failure

[PATCH 3/6] arm/l7200: fix debug macro compilation failure

[Jeremy Kerr]

We need mach/hardware.h for IO_BASE and IO_START.

Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>

---
 arch/arm/mach-l7200/include/mach/debug-macro.S |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S
index b0a2db7..31be104 100644
--- a/arch/arm/mach-l7200/include/mach/debug-macro.S
+++ b/arch/arm/mach-l7200/include/mach/debug-macro.S
@@ -11,6 +11,8 @@
  *
 */
 
+#include <mach/hardware.h>
+
 		.equ	io_virt, IO_BASE
 		.equ	io_phys, IO_START
 

[PATCH 6/6] arm/shark: fix debug macro compilation failure

[Jeremy Kerr]

We need a waituart macro.

Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>

---
 arch/arm/mach-shark/include/mach/debug-macro.S |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
index 269281f..3c46860 100644
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -21,6 +21,9 @@
 		strb	\rd, [\rx]
 		.endm
 
+		.macro waituart,rd,rx
+		.endm
+
 		.macro	busyuart,rd,rx
 		mov	\rd, #0
 1001:		add	\rd, \rd, #1
@@ -28,3 +31,5 @@
 		bne	1001b
 		.endm
 
+
+

[PATCH 6/6] arm/shark: fix debug macro compilation failure

[Russell King - ARM Linux]

On Wed, Jul 14, 2010 at 10:32:39AM +0800, Jeremy Kerr wrote:
> We need a waituart macro.
> 
> Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>
> 
> ---
>  arch/arm/mach-shark/include/mach/debug-macro.S |    5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
> index 269281f..3c46860 100644
> --- a/arch/arm/mach-shark/include/mach/debug-macro.S
> +++ b/arch/arm/mach-shark/include/mach/debug-macro.S
> @@ -21,6 +21,9 @@
>  		strb	\rd, [\rx]
>  		.endm
>  
> +		.macro waituart,rd,rx
> +		.endm
> +
>  		.macro	busyuart,rd,rx
>  		mov	\rd, #0
>  1001:		add	\rd, \rd, #1
> @@ -28,3 +31,5 @@
>  		bne	1001b
>  		.endm
>  
> +
> +

This last hunk isn't required!

[PATCH 5/6] arm/ns9xxx: fix debug macro compilation failure

[Jeremy Kerr]

We need mach/memory.h for NS9XXX_CSxSTAT_PHYS, and mach/memory.h needs
asm/memory.h for UL().

Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>

---
 arch/arm/mach-ns9xxx/include/mach/debug-macro.S |    1 +
 arch/arm/mach-ns9xxx/include/mach/memory.h      |    2 ++
 2 files changed, 3 insertions(+)

diff --git a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
index ae770fd..06f41f7 100644
--- a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
@@ -8,6 +8,7 @@
  * the Free Software Foundation.
  */
 #include <mach/hardware.h>
+#include <mach/memory.h>
 
 #include <mach/regs-board-a9m9750dev.h>
 
diff --git a/arch/arm/mach-ns9xxx/include/mach/memory.h b/arch/arm/mach-ns9xxx/include/mach/memory.h
index 6107193..b5bbda5 100644
--- a/arch/arm/mach-ns9xxx/include/mach/memory.h
+++ b/arch/arm/mach-ns9xxx/include/mach/memory.h
@@ -11,6 +11,8 @@
 #ifndef __ASM_ARCH_MEMORY_H
 #define __ASM_ARCH_MEMORY_H
 
+#include <asm/memory.h>
+
 /* x in [0..3] */
 #define NS9XXX_CSxSTAT_PHYS(x)	UL(((x) + 4) << 28)
 

[PATCH 5/6] arm/ns9xxx: fix debug macro compilation failure

[Russell King - ARM Linux]

On Wed, Jul 14, 2010 at 10:32:39AM +0800, Jeremy Kerr wrote:
> We need mach/memory.h for NS9XXX_CSxSTAT_PHYS, and mach/memory.h needs
> asm/memory.h for UL().

NAK.  Definitely NAK.  You haven't checked what includes whatelse.

asm/memory.h includes mach/memory.h to pick up the platform specific
parts, and provides mach/memory.h with its pre-requisits.  Use asm/memory.h
_everywhere_ rather than mach/memory.h.

Doing otherwise will create include loops, which leads to unreliability
in defined symbols.

[PATCH 5/6] arm/ns9xxx: fix debug macro compilation failure

[Eric Miao]

On Thu, Jul 22, 2010 at 12:38 PM, Russell King - ARM Linux
<linux@arm.linux.org.uk> wrote:
> On Wed, Jul 14, 2010 at 10:32:39AM +0800, Jeremy Kerr wrote:
>> We need mach/memory.h for NS9XXX_CSxSTAT_PHYS, and mach/memory.h needs
>> asm/memory.h for UL().
>
> NAK. ?Definitely NAK. ?You haven't checked what includes whatelse.
>
> asm/memory.h includes mach/memory.h to pick up the platform specific
> parts, and provides mach/memory.h with its pre-requisits. ?Use asm/memory.h
> _everywhere_ rather than mach/memory.h.
>

I think it would be just fine to encode PHYS_OFFSET as 0xNNNNNNNNUL
instead of using UL() if there is no specific reason. So we don't need
to include
asm/memory.h any more in machine specific code.

> Doing otherwise will create include loops, which leads to unreliability
> in defined symbols.
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>

[PATCH 5/6] arm/ns9xxx: fix debug macro compilation failure

[Russell King - ARM Linux]

On Thu, Jul 22, 2010 at 12:50:28PM +0200, Eric Miao wrote:
> On Thu, Jul 22, 2010 at 12:38 PM, Russell King - ARM Linux
> <linux@arm.linux.org.uk> wrote:
> > On Wed, Jul 14, 2010 at 10:32:39AM +0800, Jeremy Kerr wrote:
> >> We need mach/memory.h for NS9XXX_CSxSTAT_PHYS, and mach/memory.h needs
> >> asm/memory.h for UL().
> >
> > NAK. ?Definitely NAK. ?You haven't checked what includes whatelse.
> >
> > asm/memory.h includes mach/memory.h to pick up the platform specific
> > parts, and provides mach/memory.h with its pre-requisits. ?Use asm/memory.h
> > _everywhere_ rather than mach/memory.h.
> >
> 
> I think it would be just fine to encode PHYS_OFFSET as 0xNNNNNNNNUL
> instead of using UL() if there is no specific reason. So we don't need
> to include asm/memory.h any more in machine specific code.

No it's not.  0xNNNNNNNNUL isn't able to be parsed by the assembler.
That's the whole reason for UL() existing.

[PATCH v2] arm/ns9xxx: fix debug macro compilation failure

[Jeremy Kerr]

We need asm/memory.h for NS9XXX_CSxSTAT_PHYS (via mach/memory.h).

Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>

---
v2: use asm/memory.h directly

---
 arch/arm/mach-ns9xxx/include/mach/debug-macro.S |    1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
index 0859336..5c934bd 100644
--- a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
@@ -8,6 +8,7 @@
  * the Free Software Foundation.
  */
 #include <mach/hardware.h>
+#include <asm/memory.h>
 
 #include <mach/regs-board-a9m9750dev.h>
 

[PATCH v2] arm/ns9xxx: fix debug macro compilation failure

[Russell King - ARM Linux]

On Thu, Jul 22, 2010 at 04:05:50PM +0200, Jeremy Kerr wrote:
> We need asm/memory.h for NS9XXX_CSxSTAT_PHYS (via mach/memory.h).

Ok.

[PATCH 4/6] arm/plat-spear: fix debug macro compilation failure

[Jeremy Kerr]

mov rx, =<immediate> isn't valid, use #<immediate> instead.

Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>

---
 arch/arm/plat-spear/include/plat/debug-macro.S |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S
index d922310..e91270e 100644
--- a/arch/arm/plat-spear/include/plat/debug-macro.S
+++ b/arch/arm/plat-spear/include/plat/debug-macro.S
@@ -15,8 +15,8 @@
 #include <mach/spear.h>
 
 		.macro	addruart, rp, rv
-		mov	\rp, =SPEAR_DBG_UART_BASE		@ Physical base
-		mov	\rv, =VA_SPEAR_DBG_UART_BASE		@ Virtual base
+		mov	\rp, #SPEAR_DBG_UART_BASE		@ Physical base
+		mov	\rv, #VA_SPEAR_DBG_UART_BASE		@ Virtual base
 		.endm
 
 		.macro	senduart, rd, rx

[PATCH 2/6] arm/h720x: fix debug macro compilation failure

[Jeremy Kerr]

IO_BASE shoule be IO_VIRT, and IO_START should be IO_PHYS. We also need
mach/hardware.h for these definitions.

Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>

---
 arch/arm/mach-h720x/include/mach/debug-macro.S |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S
index 60c0c43..c2093e8 100644
--- a/arch/arm/mach-h720x/include/mach/debug-macro.S
+++ b/arch/arm/mach-h720x/include/mach/debug-macro.S
@@ -11,8 +11,10 @@
  *
 */
 
-		.equ    io_virt, IO_BASE
-		.equ    io_phys, IO_START
+#include <mach/hardware.h>
+
+		.equ    io_virt, IO_VIRT
+		.equ    io_phys, IO_PHYS
 
 		.macro  addruart, rp, rv
 		mov     \rp, #0x00020000	@ UART1

[PATCH 1/6] arm/clps711x: fix debug macro compilation failure

[Jeremy Kerr]

We need mach/hardware.h for CLPS7111_VIRT_BASE.

Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>

---
 arch/arm/mach-clps711x/include/mach/debug-macro.S |    1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
index 2d61679..507c687 100644
--- a/arch/arm/mach-clps711x/include/mach/debug-macro.S
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -11,6 +11,7 @@
  *
 */
 
+#include <mach/hardware.h>
 #include <asm/hardware/clps7111.h>
 
 		.macro	addruart, rp, rv

[PATCH 0/6] debug macro fixups

[Jeremy Kerr]

Hi all,

> These changes are on top of the DEBUG_LL mapping changes.

Let me know if these would be better off the other way around - fixes
first, then the mapping changes on top of that.

Cheers,


Jeremy

[PATCH 0/6] debug macro fixups

[Nicolas Pitre]

On Wed, 14 Jul 2010, Jeremy Kerr wrote:

> Hi all,
> 
> > These changes are on top of the DEBUG_LL mapping changes.
> 
> Let me know if these would be better off the other way around - fixes
> first, then the mapping changes on top of that.

Having fixes first would be preferable indeed.


Nicolas

[PATCH 0/6] debug macro fixups

[Jeremy Kerr]

Hi Nicolas,

> > Let me know if these would be better off the other way around - fixes
> > first, then the mapping changes on top of that.
> 
> Having fixes first would be preferable indeed.

OK, done & sent. I'll hold off on re-sending the (rebased) addruart
changes, as I expect there'll be more feedback on those that I can roll
into one update.

Cheers,


Jeremy

[PATCH 0/6] debug macro fixups

[Baruch Siach]

Hi Jeremy,

On Wed, Jul 14, 2010 at 10:32:39AM +0800, Jeremy Kerr wrote:
> As part of the DEBUG_LL mapping changes, I ran all of the defconfigs
> with DEBUG_LL=y. Some of the configs are broken, so I'm posting the
> fixups.
> 
> mx1 is still broken, as IMX_IO_ADDRESS() (used by the mx1 debug macros)
> uses C syntax, and so it not suitable for asm.

You can use the patches from 
http://thread.gmane.org/gmane.linux.ports.arm.kernel/75691 to make mx1 (and 
mx25) pass your tests.

baruch

> These changes are on top of the DEBUG_LL mapping changes.
> 
> Cheers,
> 
> 
> Jeremy
> 
> ---
> Jeremy Kerr (6):
>       arm/clps711x: fix debug macro compilation failure
>       arm/h720x: fix debug macro compilation failure
>       arm/l7200: fix debug macro compilation failure
>       arm/plat-spear: fix debug macro compilation failure
>       arm/ns9xxx: fix debug macro compilation failure
>       arm/shark: fix debug macro compilation failure

-- 
                                                     ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -

[PATCH 0/6] debug macro fixups

[Russell King - ARM Linux]

On Wed, Jul 14, 2010 at 10:32:39AM +0800, Jeremy Kerr wrote:
> As part of the DEBUG_LL mapping changes, I ran all of the defconfigs
> with DEBUG_LL=y. Some of the configs are broken, so I'm posting the
> fixups.

Apart from the two comments, the rest is fine, and should be merged
in -rc.  Please send the fixed patches to the patch system.

[PATCH 0/6] debug macro fixups

[Jeremy Kerr]

Hi Russell,

> Apart from the two comments, the rest is fine, and should be merged
> in -rc.  Please send the fixed patches to the patch system.

OK, done. Do you want a pull request for the 'debug maping via
addruart'?

Cheers,


Jeremy