* [GIT PULL] OMAP: clock, hwmod, omap_device, PM constraints: patches for 2.6.36
@ 2010-07-03 21:50 Paul Walmsley
2010-07-06 11:09 ` Tony Lindgren
0 siblings, 1 reply; 4+ messages in thread
From: Paul Walmsley @ 2010-07-03 21:50 UTC (permalink / raw)
To: linux-arm-kernel
Hi Tony,
here's the pull request for some clock, hwmod, omap_device, PM constraints
patches for 2.6.36.
- Paul
The following changes since commit 7e27d6e778cd87b6f2415515d7127eba53fe5d02:
Linux 2.6.35-rc3 (2010-06-11 19:14:04 -0700)
are available in the git repository at:
git://git.pwsan.com/linux-2.6 for_2.6.36
Anand Gadiyar (1):
OMAP3: wait on IDLEST after enabling USBTLL fclk
Benoit Cousson (1):
OMAP2&3: hwmod: Remove _hwmod prefix in name string
Kevin Hilman (8):
OMAP24xx: CM: fix mask used for checking IDLEST status
OMAP2/3: hwmod: L3 and L4 CORE/PER/WKUP hwmods don't have IDLEST
OMAP: hwmod: add non-locking versions of enable and idle functions
OMAP: omap_device: ensure hwmod tracks attached omap_device pointer
OMAP: PM: create omap_devices for MPU, DSP, L3
OMAP: hwmod data: add class for IVA hwmods
OMAP2&3: hwmod: Replace l3 -> l3_main
OMAP3: hwmod data: add data for OMAP3 IVA2
Paul Walmsley (9):
OMAP: clock: add kerneldoc for structures; move flags closer to structs
OMAP1: OPP: add KConfig entry for 96MHz ARM rate (using a 12MHz oscillator)
OMAP1: clock: some cleanup
OMAP: hwmod: allow omap_hwmod_late_init() caller to skip module idle in _setup()
OMAP2: hwmod data: add IVA1 (2420), IVA2 (2430) hwmods
OMAP: hwmod/device: add omap_{device,hwmod}_get_mpu_rt_va
OMAP2+: hwmod/device: update documentation and copyright
OMAP: PM constraints: add return values; add requesting device param to omap_pm_set_max_dev_wakeup_lat()
OMAP: PM constraints: add omap_pm_set_min_clk_rate()
Rajendra Nayak (1):
OMAP4: hwmod: Enable omap_device build for OMAP4
arch/arm/mach-omap1/Kconfig | 6 +
arch/arm/mach-omap1/clock.c | 22 +++--
arch/arm/mach-omap1/clock.h | 2 +-
arch/arm/mach-omap1/clock_data.c | 129 +++++++++++++++++++-----
arch/arm/mach-omap2/Makefile | 4 +-
arch/arm/mach-omap2/clock3xxx_data.c | 2 +-
arch/arm/mach-omap2/cm.c | 6 +-
arch/arm/mach-omap2/io.c | 11 ++-
arch/arm/mach-omap2/omap_hwmod.c | 106 +++++++++++++++-----
arch/arm/mach-omap2/omap_hwmod_2420_data.c | 79 +++++++++++-----
arch/arm/mach-omap2/omap_hwmod_2430_data.c | 81 +++++++++++-----
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 92 ++++++++++++------
arch/arm/mach-omap2/omap_hwmod_common_data.c | 3 +
arch/arm/mach-omap2/omap_hwmod_common_data.h | 1 +
arch/arm/mach-omap2/pm.c | 84 ++++++++++++++++
arch/arm/plat-omap/Makefile | 1 +
arch/arm/plat-omap/i2c.c | 12 ++-
arch/arm/plat-omap/include/plat/clock.h | 130 ++++++++++++++++++++-----
arch/arm/plat-omap/include/plat/common.h | 4 +
arch/arm/plat-omap/include/plat/omap-pm.h | 130 +++++++++++++++++++------
arch/arm/plat-omap/include/plat/omap_device.h | 2 +
arch/arm/plat-omap/include/plat/omap_hwmod.h | 14 ++-
arch/arm/plat-omap/omap-pm-noop.c | 61 +++++++++---
arch/arm/plat-omap/omap_device.c | 33 ++++++-
24 files changed, 790 insertions(+), 225 deletions(-)
create mode 100644 arch/arm/mach-omap2/pm.c
^ permalink raw reply [flat|nested] 4+ messages in thread
* [GIT PULL] OMAP: clock, hwmod, omap_device, PM constraints: patches for 2.6.36
2010-07-03 21:50 [GIT PULL] OMAP: clock, hwmod, omap_device, PM constraints: patches for 2.6.36 Paul Walmsley
@ 2010-07-06 11:09 ` Tony Lindgren
2010-08-03 22:28 ` Kevin Hilman
0 siblings, 1 reply; 4+ messages in thread
From: Tony Lindgren @ 2010-07-06 11:09 UTC (permalink / raw)
To: linux-arm-kernel
* Paul Walmsley <paul@pwsan.com> [100704 00:43]:
>
> Hi Tony,
>
> here's the pull request for some clock, hwmod, omap_device, PM constraints
> patches for 2.6.36.
Thanks, pulled into omap-for-linus.
Tony
>
> - Paul
>
> The following changes since commit 7e27d6e778cd87b6f2415515d7127eba53fe5d02:
>
> Linux 2.6.35-rc3 (2010-06-11 19:14:04 -0700)
>
> are available in the git repository at:
> git://git.pwsan.com/linux-2.6 for_2.6.36
>
> Anand Gadiyar (1):
> OMAP3: wait on IDLEST after enabling USBTLL fclk
>
> Benoit Cousson (1):
> OMAP2&3: hwmod: Remove _hwmod prefix in name string
>
> Kevin Hilman (8):
> OMAP24xx: CM: fix mask used for checking IDLEST status
> OMAP2/3: hwmod: L3 and L4 CORE/PER/WKUP hwmods don't have IDLEST
> OMAP: hwmod: add non-locking versions of enable and idle functions
> OMAP: omap_device: ensure hwmod tracks attached omap_device pointer
> OMAP: PM: create omap_devices for MPU, DSP, L3
> OMAP: hwmod data: add class for IVA hwmods
> OMAP2&3: hwmod: Replace l3 -> l3_main
> OMAP3: hwmod data: add data for OMAP3 IVA2
>
> Paul Walmsley (9):
> OMAP: clock: add kerneldoc for structures; move flags closer to structs
> OMAP1: OPP: add KConfig entry for 96MHz ARM rate (using a 12MHz oscillator)
> OMAP1: clock: some cleanup
> OMAP: hwmod: allow omap_hwmod_late_init() caller to skip module idle in _setup()
> OMAP2: hwmod data: add IVA1 (2420), IVA2 (2430) hwmods
> OMAP: hwmod/device: add omap_{device,hwmod}_get_mpu_rt_va
> OMAP2+: hwmod/device: update documentation and copyright
> OMAP: PM constraints: add return values; add requesting device param to omap_pm_set_max_dev_wakeup_lat()
> OMAP: PM constraints: add omap_pm_set_min_clk_rate()
>
> Rajendra Nayak (1):
> OMAP4: hwmod: Enable omap_device build for OMAP4
>
> arch/arm/mach-omap1/Kconfig | 6 +
> arch/arm/mach-omap1/clock.c | 22 +++--
> arch/arm/mach-omap1/clock.h | 2 +-
> arch/arm/mach-omap1/clock_data.c | 129 +++++++++++++++++++-----
> arch/arm/mach-omap2/Makefile | 4 +-
> arch/arm/mach-omap2/clock3xxx_data.c | 2 +-
> arch/arm/mach-omap2/cm.c | 6 +-
> arch/arm/mach-omap2/io.c | 11 ++-
> arch/arm/mach-omap2/omap_hwmod.c | 106 +++++++++++++++-----
> arch/arm/mach-omap2/omap_hwmod_2420_data.c | 79 +++++++++++-----
> arch/arm/mach-omap2/omap_hwmod_2430_data.c | 81 +++++++++++-----
> arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 92 ++++++++++++------
> arch/arm/mach-omap2/omap_hwmod_common_data.c | 3 +
> arch/arm/mach-omap2/omap_hwmod_common_data.h | 1 +
> arch/arm/mach-omap2/pm.c | 84 ++++++++++++++++
> arch/arm/plat-omap/Makefile | 1 +
> arch/arm/plat-omap/i2c.c | 12 ++-
> arch/arm/plat-omap/include/plat/clock.h | 130 ++++++++++++++++++++-----
> arch/arm/plat-omap/include/plat/common.h | 4 +
> arch/arm/plat-omap/include/plat/omap-pm.h | 130 +++++++++++++++++++------
> arch/arm/plat-omap/include/plat/omap_device.h | 2 +
> arch/arm/plat-omap/include/plat/omap_hwmod.h | 14 ++-
> arch/arm/plat-omap/omap-pm-noop.c | 61 +++++++++---
> arch/arm/plat-omap/omap_device.c | 33 ++++++-
> 24 files changed, 790 insertions(+), 225 deletions(-)
> create mode 100644 arch/arm/mach-omap2/pm.c
^ permalink raw reply [flat|nested] 4+ messages in thread
* [GIT PULL] OMAP: clock, hwmod, omap_device, PM constraints: patches for 2.6.36
2010-07-06 11:09 ` Tony Lindgren
@ 2010-08-03 22:28 ` Kevin Hilman
2010-08-04 5:51 ` Tony Lindgren
0 siblings, 1 reply; 4+ messages in thread
From: Kevin Hilman @ 2010-08-03 22:28 UTC (permalink / raw)
To: linux-arm-kernel
Tony Lindgren <tony@atomide.com> writes:
> * Paul Walmsley <paul@pwsan.com> [100704 00:43]:
>>
>> Hi Tony,
>>
>> here's the pull request for some clock, hwmod, omap_device, PM constraints
>> patches for 2.6.36.
>
> Thanks, pulled into omap-for-linus.
>
Hmm, I don't see this in current omap-for-linus. Is it still planned
for 2.6.36?
Once this is merged, the all the hwmod/omap_device conversions will only
have a dependency on the OMAP runtime PM core.
Kevin
>
>
>>
>> - Paul
>>
>> The following changes since commit 7e27d6e778cd87b6f2415515d7127eba53fe5d02:
>>
>> Linux 2.6.35-rc3 (2010-06-11 19:14:04 -0700)
>>
>> are available in the git repository at:
>> git://git.pwsan.com/linux-2.6 for_2.6.36
>>
>> Anand Gadiyar (1):
>> OMAP3: wait on IDLEST after enabling USBTLL fclk
>>
>> Benoit Cousson (1):
>> OMAP2&3: hwmod: Remove _hwmod prefix in name string
>>
>> Kevin Hilman (8):
>> OMAP24xx: CM: fix mask used for checking IDLEST status
>> OMAP2/3: hwmod: L3 and L4 CORE/PER/WKUP hwmods don't have IDLEST
>> OMAP: hwmod: add non-locking versions of enable and idle functions
>> OMAP: omap_device: ensure hwmod tracks attached omap_device pointer
>> OMAP: PM: create omap_devices for MPU, DSP, L3
>> OMAP: hwmod data: add class for IVA hwmods
>> OMAP2&3: hwmod: Replace l3 -> l3_main
>> OMAP3: hwmod data: add data for OMAP3 IVA2
>>
>> Paul Walmsley (9):
>> OMAP: clock: add kerneldoc for structures; move flags closer to structs
>> OMAP1: OPP: add KConfig entry for 96MHz ARM rate (using a 12MHz oscillator)
>> OMAP1: clock: some cleanup
>> OMAP: hwmod: allow omap_hwmod_late_init() caller to skip module idle in _setup()
>> OMAP2: hwmod data: add IVA1 (2420), IVA2 (2430) hwmods
>> OMAP: hwmod/device: add omap_{device,hwmod}_get_mpu_rt_va
>> OMAP2+: hwmod/device: update documentation and copyright
>> OMAP: PM constraints: add return values; add requesting device param to omap_pm_set_max_dev_wakeup_lat()
>> OMAP: PM constraints: add omap_pm_set_min_clk_rate()
>>
>> Rajendra Nayak (1):
>> OMAP4: hwmod: Enable omap_device build for OMAP4
>>
>> arch/arm/mach-omap1/Kconfig | 6 +
>> arch/arm/mach-omap1/clock.c | 22 +++--
>> arch/arm/mach-omap1/clock.h | 2 +-
>> arch/arm/mach-omap1/clock_data.c | 129 +++++++++++++++++++-----
>> arch/arm/mach-omap2/Makefile | 4 +-
>> arch/arm/mach-omap2/clock3xxx_data.c | 2 +-
>> arch/arm/mach-omap2/cm.c | 6 +-
>> arch/arm/mach-omap2/io.c | 11 ++-
>> arch/arm/mach-omap2/omap_hwmod.c | 106 +++++++++++++++-----
>> arch/arm/mach-omap2/omap_hwmod_2420_data.c | 79 +++++++++++-----
>> arch/arm/mach-omap2/omap_hwmod_2430_data.c | 81 +++++++++++-----
>> arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 92 ++++++++++++------
>> arch/arm/mach-omap2/omap_hwmod_common_data.c | 3 +
>> arch/arm/mach-omap2/omap_hwmod_common_data.h | 1 +
>> arch/arm/mach-omap2/pm.c | 84 ++++++++++++++++
>> arch/arm/plat-omap/Makefile | 1 +
>> arch/arm/plat-omap/i2c.c | 12 ++-
>> arch/arm/plat-omap/include/plat/clock.h | 130 ++++++++++++++++++++-----
>> arch/arm/plat-omap/include/plat/common.h | 4 +
>> arch/arm/plat-omap/include/plat/omap-pm.h | 130 +++++++++++++++++++------
>> arch/arm/plat-omap/include/plat/omap_device.h | 2 +
>> arch/arm/plat-omap/include/plat/omap_hwmod.h | 14 ++-
>> arch/arm/plat-omap/omap-pm-noop.c | 61 +++++++++---
>> arch/arm/plat-omap/omap_device.c | 33 ++++++-
>> 24 files changed, 790 insertions(+), 225 deletions(-)
>> create mode 100644 arch/arm/mach-omap2/pm.c
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 4+ messages in thread
* [GIT PULL] OMAP: clock, hwmod, omap_device, PM constraints: patches for 2.6.36
2010-08-03 22:28 ` Kevin Hilman
@ 2010-08-04 5:51 ` Tony Lindgren
0 siblings, 0 replies; 4+ messages in thread
From: Tony Lindgren @ 2010-08-04 5:51 UTC (permalink / raw)
To: linux-arm-kernel
* Kevin Hilman <khilman@deeprootsystems.com> [100804 01:21]:
> Tony Lindgren <tony@atomide.com> writes:
>
> > * Paul Walmsley <paul@pwsan.com> [100704 00:43]:
> >>
> >> Hi Tony,
> >>
> >> here's the pull request for some clock, hwmod, omap_device, PM constraints
> >> patches for 2.6.36.
> >
> > Thanks, pulled into omap-for-linus.
> >
>
> Hmm, I don't see this in current omap-for-linus. Is it still planned
> for 2.6.36?
Thanks for checking. Paul asked me to redo the pull after fixing some
credits, and looks like then I forgot to pull.
> Once this is merged, the all the hwmod/omap_device conversions will only
> have a dependency on the OMAP runtime PM core.
Yeah that's good!
Tony
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2010-08-04 5:51 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-07-03 21:50 [GIT PULL] OMAP: clock, hwmod, omap_device, PM constraints: patches for 2.6.36 Paul Walmsley
2010-07-06 11:09 ` Tony Lindgren
2010-08-03 22:28 ` Kevin Hilman
2010-08-04 5:51 ` Tony Lindgren
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).