[PATCH 07/11] [ARM] pxa/balloon3: Machine file cleanup

[marek.vasut@gmail.com (Marek Vasut)]

Dne P? 6. srpna 2010 01:25:06 Jonathan McDowell napsal(a):
> On Wed, Aug 04, 2010 at 01:22:09PM +0200, Marek Vasut wrote:
> > Modularize components of the Balloon3 board.
> 
> NAK.
> 
> That's not what a large portion of this patch does.

Oh, really ?

> You have put all of
> the pin definitions into balloon3_pin_config and negated the work that
> was done to ensure that a single kernel could run on different variants
> of the balloon3.

I have only this one, but read on.

> If a feature isn't configured on the board you
> shouldn't configure the MFPs for that feature.

That's not true. You should configure them as inputs. The big plan (in another 
patch) is to do this the same way colibri270 is done (balloon3 baseboard + 
expansion boards).
> 
> > Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> > ---
> > 
> >  arch/arm/mach-pxa/balloon3.c |  354
> >  +++++++++++++++++++++++++++--------------- 1 files changed, 231
> >  insertions(+), 123 deletions(-)
> > 
> > diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
> > index 8adb87a..572525c 100644
> > --- a/arch/arm/mach-pxa/balloon3.c
> > +++ b/arch/arm/mach-pxa/balloon3.c
> > @@ -22,6 +22,7 @@
> > 
> >  #include <linux/fb.h>
> >  #include <linux/gpio.h>
> >  #include <linux/ioport.h>
> > 
> > +#include <linux/ucb1400.h>
> > 
> >  #include <linux/mtd/mtd.h>
> >  #include <linux/mtd/partitions.h>
> >  #include <linux/types.h>
> > 
> > @@ -61,35 +62,136 @@ static unsigned long balloon3_pin_config[]
> > __initdata = {
> > 
> >  	GPIO44_BTUART_CTS,
> >  	GPIO45_BTUART_RTS,
> > 
> > -	/* Wakeup GPIO */
> > +	/* Reset, configured as GPIO wakeup source */
> > 
> >  	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
> > 
> > -	/* NAND & IDLE LED GPIOs */
> > -	GPIO9_GPIO,
> > -	GPIO10_GPIO,
> > -};
> > +	/* LEDs */
> > +	GPIO9_GPIO,	/* NAND activity LED */
> > +	GPIO10_GPIO,	/* Heartbeat LED */
> > 
> > -/***********************************************************************
> > ******* - * Audio and Touchscreen
> > -
> > ************************************************************************
> > ******/ -static unsigned long balloon3_ac97_pin_config[] = {
> > +	/* AC97 */
> > 
> >  	GPIO28_AC97_BITCLK,
> >  	GPIO29_AC97_SDATA_IN_0,
> >  	GPIO30_AC97_SDATA_OUT,
> >  	GPIO31_AC97_SYNC,
> >  	GPIO113_AC97_nRESET,
> > 
> > +	GPIO95_GPIO,
> > +
> > +	/* MMC */
> > +	GPIO32_MMC_CLK,
> > +	GPIO92_MMC_DAT_0,
> > +	GPIO109_MMC_DAT_1,
> > +	GPIO110_MMC_DAT_2,
> > +	GPIO111_MMC_DAT_3,
> > +	GPIO112_MMC_CMD,
> > +
> > +	/* USB Host */
> > +	GPIO88_USBH1_PWR,
> > +	GPIO89_USBH1_PEN,
> > 
> >  };
> 
> J.