From mboxrd@z Thu Jan 1 00:00:00 1970 From: marek.vasut@gmail.com (Marek Vasut) Date: Wed, 11 Aug 2010 23:25:55 +0200 Subject: [PATCH] ARM: COLIBRI PXA320: fix UCB1400 irq autoprobing In-Reply-To: References: Message-ID: <201008112325.56019.marek.vasut@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Dne St 11. srpna 2010 14:54:13 Yuri Ludkevich napsal(a): > Ads properly initialization to GPIO4 ( alt. fn. #1, nCS3; because GPIO4 and > GPIO4_2 cannot be > configured as GPIO simultaneously ) so GPIO4_2 which used as irq line from > UCB1400 may be > detected while irq autoprobing routine. > > Signed-off by: Yuri Ludkevich > --- > > --- linux-next/arch/arm/mach-pxa/colibri-pxa320.c.orig 2010-08-11 > 16:01:46.000000000 +0400 > +++ linux-next/arch/arm/mach-pxa/colibri-pxa320.c 2010-08-11 > 16:23:30.000000000 +0400 > @@ -236,6 +236,19 @@ static void __init colibri_pxa320_init_u > pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_uart_pin_config)); > } > > + > +static mfp_cfg_t colibri_pxa320_cpld_pin_config[] __initdata = { > + /* init GPIO4 as nCS3 (AF1). If GPIO4 stay as GPIO > + touchscreen irq (GPIO4_2 pin) autoprobing will not work. > + See Marvell PXA320 datasheet for more details */ > + GPIO4_nCS3, > +}; > + > +static void __init colibri_pxa320_init_cpld(void) > +{ > + pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_cpld_pin_config)); > +} > + > void __init colibri_pxa320_init(void) > { > pxa_set_ffuart_info(NULL); > @@ -252,6 +265,7 @@ void __init colibri_pxa320_init(void) > mfp_to_gpio(MFP_PIN_GPIO28)); > colibri_pxa320_init_uart(); > colibri_pxa320_init_udc(); > + colibri_pxa320_init_cpld(); > } > > MACHINE_START(COLIBRI320, "Toradex Colibri PXA320") Do we even have a touchscreen init routine on 320? Maybe you could supply us with such a patch too? Thanks :)