From mboxrd@z Thu Jan 1 00:00:00 1970 From: tony@atomide.com (Tony Lindgren) Date: Thu, 16 Sep 2010 10:53:18 -0700 Subject: [PATCH 1/5] omap3: Introduce CompuLab CM-T3517 module. In-Reply-To: <1284627281-26059-2-git-send-email-grinberg@compulab.co.il> References: <1284627281-26059-1-git-send-email-grinberg@compulab.co.il> <1284627281-26059-2-git-send-email-grinberg@compulab.co.il> Message-ID: <20100916175317.GF29610@atomide.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org * Igor Grinberg [100916 01:46]: > Add basic suppot, enable uart and led. > > Signed-off-by: Igor Grinberg > --- > arch/arm/mach-omap2/Kconfig | 7 ++ > arch/arm/mach-omap2/Makefile | 1 + > arch/arm/mach-omap2/board-cm-t3517.c | 109 ++++++++++++++++++++++++++++++++++ > 3 files changed, 117 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/mach-omap2/board-cm-t3517.c Looks like you're missing the debug uart entry for arch/arm/plat-omap/include/plat/uncompress.h? You can test this by enabling DEBUG_LL and EARLY_PRINTK in your .config, then pass earlyprintk in the kernel cmdline. Might become handy for debugging the early init process for your board. Regards, Tony