[PATCH 0/3] Few omap1 patches for v2.6.37 merge window

[PATCH 0/3] Few omap1 patches for v2.6.37 merge window

[Tony Lindgren]

Hi all,

Here are some omap1 related patches I've picked up for the upcoming
merge window.

Regards,

Tony

---

Janusz Krzysztofik (3):
      OMAP1: Add support for SoC camera interface
      OMAP1: Amstrad Delta: add support for camera
      OMAP1: Amstrad Delta: add camera controlled LEDS trigger


 arch/arm/mach-omap1/board-ams-delta.c     |   69 +++++++++++++++++++++++++++++
 arch/arm/mach-omap1/devices.c             |   43 ++++++++++++++++++
 arch/arm/mach-omap1/include/mach/camera.h |   11 +++++
 3 files changed, 123 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-omap1/include/mach/camera.h

-- 
Signature

[PATCH 1/3] OMAP1: Add support for SoC camera interface

[Tony Lindgren]

From: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>

This patch adds a definition of the OMAP1 camera interface platform device,
and a function that allows for providing a board specific platform data.
The device will be used with the upcoming OMAP1 SoC camera interface driver.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/devices.c             |   43 +++++++++++++++++++++++++++++
 arch/arm/mach-omap1/include/mach/camera.h |   11 +++++++
 2 files changed, 54 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-omap1/include/mach/camera.h

diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index aa07256..2c9a030 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -9,6 +9,7 @@
  * (at your option) any later version.
  */
 
+#include <linux/dma-mapping.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -191,6 +192,48 @@ static inline void omap_init_spi100k(void)
 }
 #endif
 
+
+#define OMAP1_CAMERA_BASE	0xfffb6800
+#define OMAP1_CAMERA_IOSIZE	0x1c
+
+static struct resource omap1_camera_resources[] = {
+	[0] = {
+		.start	= OMAP1_CAMERA_BASE,
+		.end	= OMAP1_CAMERA_BASE + OMAP1_CAMERA_IOSIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= INT_CAMERA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 omap1_camera_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device omap1_camera_device = {
+	.name		= "omap1-camera",
+	.id		= 0, /* This is used to put cameras on this interface */
+	.dev		= {
+		.dma_mask		= &omap1_camera_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(omap1_camera_resources),
+	.resource	= omap1_camera_resources,
+};
+
+void __init omap1_camera_init(void *info)
+{
+	struct platform_device *dev = &omap1_camera_device;
+	int ret;
+
+	dev->dev.platform_data = info;
+
+	ret = platform_device_register(dev);
+	if (ret)
+		dev_err(&dev->dev, "unable to register device: %d\n", ret);
+}
+
+
 /*-------------------------------------------------------------------------*/
 
 static inline void omap_init_sti(void) {}
diff --git a/arch/arm/mach-omap1/include/mach/camera.h b/arch/arm/mach-omap1/include/mach/camera.h
new file mode 100644
index 0000000..fd54b45
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/camera.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_ARCH_CAMERA_H_
+#define __ASM_ARCH_CAMERA_H_
+
+void omap1_camera_init(void *);
+
+static inline void omap1_set_camera_info(struct omap1_cam_platform_data *info)
+{
+	omap1_camera_init(info);
+}
+
+#endif /* __ASM_ARCH_CAMERA_H_ */

[PATCH 2/3] OMAP1: Amstrad Delta: add support for camera

[Tony Lindgren]

From: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>

This patch adds configuration data and initialization code required for camera
support to the Amstrad Delta board.

Three devices are declared: SoC camera, OMAP1 camera interface and OV6650
sensor.

Default 12MHz clock has been selected for driving the sensor. Pixel clock has
been limited to get reasonable frame rates, not exceeding the board
capabilities. Since both devices (interface and sensor) support both pixel
clock polarities, decision on polarity selection has been left to drivers.
Interface GPIO line has been found not functional, thus not configured.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/board-ams-delta.c |   45 +++++++++++++++++++++++++++++++++
 1 files changed, 45 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 41992ab..12f7f60 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -19,6 +19,8 @@
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 
+#include <media/soc_camera.h>
+
 #include <asm/serial.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -32,6 +34,7 @@
 #include <plat/usb.h>
 #include <plat/board.h>
 #include <plat/common.h>
+#include <mach/camera.h>
 
 #include <mach/ams-delta-fiq.h>
 
@@ -213,10 +216,37 @@ static struct platform_device ams_delta_led_device = {
 	.id	= -1
 };
 
+static struct i2c_board_info ams_delta_camera_board_info[] = {
+	{
+		I2C_BOARD_INFO("ov6650", 0x60),
+	},
+};
+
+static struct soc_camera_link __initdata ams_delta_iclink = {
+	.bus_id         = 0,	/* OMAP1 SoC camera bus */
+	.i2c_adapter_id = 1,
+	.board_info     = &ams_delta_camera_board_info[0],
+	.module_name    = "ov6650",
+};
+
+static struct platform_device ams_delta_camera_device = {
+	.name   = "soc-camera-pdrv",
+	.id     = 0,
+	.dev    = {
+		.platform_data = &ams_delta_iclink,
+	},
+};
+
+static struct omap1_cam_platform_data ams_delta_camera_platform_data = {
+	.camexclk_khz	= 12000,	/* default 12MHz clock, no extra DPLL */
+	.lclk_khz_max	= 1334,		/* results in 5fps CIF, 10fps QCIF */
+};
+
 static struct platform_device *ams_delta_devices[] __initdata = {
 	&ams_delta_kp_device,
 	&ams_delta_lcd_device,
 	&ams_delta_led_device,
+	&ams_delta_camera_device,
 };
 
 static void __init ams_delta_init(void)
@@ -225,6 +255,20 @@ static void __init ams_delta_init(void)
 	omap_cfg_reg(UART1_TX);
 	omap_cfg_reg(UART1_RTS);
 
+	/* parallel camera interface */
+	omap_cfg_reg(H19_1610_CAM_EXCLK);
+	omap_cfg_reg(J15_1610_CAM_LCLK);
+	omap_cfg_reg(L18_1610_CAM_VS);
+	omap_cfg_reg(L15_1610_CAM_HS);
+	omap_cfg_reg(L19_1610_CAM_D0);
+	omap_cfg_reg(K14_1610_CAM_D1);
+	omap_cfg_reg(K15_1610_CAM_D2);
+	omap_cfg_reg(K19_1610_CAM_D3);
+	omap_cfg_reg(K18_1610_CAM_D4);
+	omap_cfg_reg(J14_1610_CAM_D5);
+	omap_cfg_reg(J19_1610_CAM_D6);
+	omap_cfg_reg(J18_1610_CAM_D7);
+
 	iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
 
 	omap_board_config = ams_delta_config;
@@ -236,6 +280,7 @@ static void __init ams_delta_init(void)
 	ams_delta_latch2_write(~0, 0);
 
 	omap1_usb_init(&ams_delta_usb_config);
+	omap1_set_camera_info(&ams_delta_camera_platform_data);
 	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
 
 #ifdef CONFIG_AMS_DELTA_FIQ

[PATCH 3/3] OMAP1: Amstrad Delta: add camera controlled LEDS trigger

[Tony Lindgren]

From: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>

This patch extends the Amstrad Delta camera support with LEDS trigger that can
be used for automatic control of the on-board camera LED. The led turns on
automatically on camera device open and turns off on camera device close.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/board-ams-delta.c |   24 ++++++++++++++++++++++++
 1 files changed, 24 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 12f7f60..248e8bb 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
+#include <linux/leds.h>
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 
@@ -222,11 +223,30 @@ static struct i2c_board_info ams_delta_camera_board_info[] = {
 	},
 };
 
+#ifdef CONFIG_LEDS_TRIGGERS
+DEFINE_LED_TRIGGER(ams_delta_camera_led_trigger);
+
+static int ams_delta_camera_power(struct device *dev, int power)
+{
+	/*
+	 * turn on camera LED
+	 */
+	if (power)
+		led_trigger_event(ams_delta_camera_led_trigger, LED_FULL);
+	else
+		led_trigger_event(ams_delta_camera_led_trigger, LED_OFF);
+	return 0;
+}
+#else
+#define ams_delta_camera_power	NULL
+#endif
+
 static struct soc_camera_link __initdata ams_delta_iclink = {
 	.bus_id         = 0,	/* OMAP1 SoC camera bus */
 	.i2c_adapter_id = 1,
 	.board_info     = &ams_delta_camera_board_info[0],
 	.module_name    = "ov6650",
+	.power		= ams_delta_camera_power,
 };
 
 static struct platform_device ams_delta_camera_device = {
@@ -281,6 +301,10 @@ static void __init ams_delta_init(void)
 
 	omap1_usb_init(&ams_delta_usb_config);
 	omap1_set_camera_info(&ams_delta_camera_platform_data);
+#ifdef CONFIG_LEDS_TRIGGERS
+	led_trigger_register_simple("ams_delta_camera",
+			&ams_delta_camera_led_trigger);
+#endif
 	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
 
 #ifdef CONFIG_AMS_DELTA_FIQ