[PATCH 9/10] ASoC: SAMSUNG: Add S/PDIF CPU driver

[broonie@opensource.wolfsonmicro.com (Mark Brown)]

On Mon, Oct 04, 2010 at 09:13:17PM +0900, Seungwhan Youn wrote:

> +static int spdif_set_sysclk(struct snd_soc_dai *cpu_dai,
> +				int clk_id, unsigned int freq, int dir)
> +{

If you save the clock rate here...

> +	case SND_SOC_SPDIF_MAIN_AUDIO_CLK:
> +		switch (div) {
> +		case 256:
> +			con |= CON_MCLKDIV_256FS;
> +			break;
> +		case 384:
> +			con |= CON_MCLKDIV_384FS;
> +			break;
> +		case 512:
> +			con |= CON_MCLKDIV_512FS;
> +			break;

...then you can calculate this dynamically at runtime in hw_params which
makes life easier for users.

> +/**
> + * struct samsung_spdif_info - Samsung S/PDIF Controller information
> + * @lock: Spin lock for S/PDIF.
> + * @dev: The parent device passed to use from the probe.
> + * @regs: The pointer to the device register block.
> + * @pclk: The peri-clock pointer for spdif master operation.
> + * @sclk: The source clock pointer for making sync signals.
> + * @save_clkcon: Backup clkcon reg. in suspend.
> + * @save_con: Backup con reg. in suspend.
> + * @save_cstas: Backup cstas reg. in suspend.
> + * @dma_playback: DMA information for playback channel.
> + */
> +struct samsung_spdif_info {
> +	spinlock_t	lock;

No need to have this in the headers.

> +/* Registers */
> +#define CLKCON				0x00
> +#define CON				0x04
> +#define BSTAS				0x08

These should all be namespaced or in the driver file to avoid collisoons
with other things - even if only used in this driver things like CON are
risky for collisions with normal kernel headers the driver needs.