From mboxrd@z Thu Jan 1 00:00:00 1970 From: w.sang@pengutronix.de (Wolfram Sang) Date: Mon, 18 Oct 2010 13:36:35 +0200 Subject: [PATCH 0/6] SD/MMC driver for MX25/35/51 In-Reply-To: References: <4CB56A88.2040101@eukrea.com> <20101013082930.GA11286@pengutronix.de> <8762x6xx00.fsf@lechat.rtp-net.org> <20101013100632.GC11286@pengutronix.de> <4CB58565.5020806@eukrea.com> <20101013102055.GD11286@pengutronix.de> <20101015102729.GB4276@pengutronix.de> Message-ID: <20101018113635.GA15440@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Richard, On Mon, Oct 18, 2010 at 04:48:07PM +0800, Zhu Richard-R65037 wrote: > The debug msg "mmc0: mmc_rescan: trying to init card at 400000 Hz..." are dumped out repeatedly. > ROOT: There are pr_info codes in the mmc_rescan func. There was already a patch on this list fixing it. > The other: > Encounter the Timeout and CRC error when the sandisk 4G SDHC card are used as the ROOTFS storage media > When I boot up the BBG board. > > It seems that the "SDHCI_QUIRK_BROKEN_TIMEOUT_VAL" is mandatory required at my side when I did the tests > on BBG3.0 board, and the i.MX51 board can support the "MULTI-BLOCK". Okay, this can be fixed... > BTW, I still can't fetch out the latest codes out, that means I still can't found the V5 patches, although I run > the git fetch and git rebase. :( My branch gets rebased because I can't mainline the driver with all my incremental improvements. Does just taking the branch and cherry-pick your additions work? (BTW meanwhile you can also just use mmc-next) Regards, Wolfram -- Pengutronix e.K. | Wolfram Sang | Industrial Linux Solutions | http://www.pengutronix.de/ | -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 197 bytes Desc: Digital signature URL: