From: u.kleine-koenig@pengutronix.de (Uwe Kleine-König)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: imx: change mx51.h into mx5x.h
Date: Wed, 20 Oct 2010 11:01:22 +0200 [thread overview]
Message-ID: <20101020090122.GH28166@pengutronix.de> (raw)
In-Reply-To: <1287525423-22329-1-git-send-email-Dinh.Nguyen@freescale.com>
Hello Dinh,
On Tue, Oct 19, 2010 at 04:57:03PM -0500, Dinh.Nguyen at freescale.com wrote:
> From: Dinh Nguyen <Dinh.Nguyen@freescale.com>
>
> In preparation for submitting i.MX53 support, change mx51.h to
> mx5x.h so that mx5x.h can contain MX53 information as well.
Last time I found time to clean up the imx ports I worked hard that e.g.
mx27 machines only used MX27_ prefixed symbols, not the MX2x_ ones. (I
don't remember off-hand if I was done, so there might be a few users
left.)
I'd prefer to just add an mx53.h instead.
> Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
> ---
> arch/arm/mach-mx5/devices-imx51.h | 2 +-
> arch/arm/plat-mxc/include/mach/debug-macro.S | 2 +-
> arch/arm/plat-mxc/include/mach/hardware.h | 2 +-
> arch/arm/plat-mxc/include/mach/{mx51.h => mx5x.h} | 0
BTW, this is wrong, at least the header guard needs updating when you
rename the file.
> 4 files changed, 3 insertions(+), 3 deletions(-)
> rename arch/arm/plat-mxc/include/mach/{mx51.h => mx5x.h} (100%)
>
> diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h
> index 5cc910e..f6abe2d 100644
> --- a/arch/arm/mach-mx5/devices-imx51.h
> +++ b/arch/arm/mach-mx5/devices-imx51.h
> @@ -6,7 +6,7 @@
> * the terms of the GNU General Public License version 2 as published by the
> * Free Software Foundation.
> */
> -#include <mach/mx51.h>
> +#include <mach/mx5x.h>
> #include <mach/devices-common.h>
>
> extern const struct imx_fec_data imx51_fec_data __initconst;
> diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
> index 2560640..ac8a2bf 100644
> --- a/arch/arm/plat-mxc/include/mach/debug-macro.S
> +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
> @@ -49,7 +49,7 @@
> #ifdef UART_PADDR
> #error "CONFIG_DEBUG_LL is incompatible with multiple archs"
> #endif
> -#include <mach/mx51.h>
> +#include <mach/mx5x.h>
> #define UART_PADDR MX51_UART1_BASE_ADDR
> #define UART_VADDR MX51_AIPS1_IO_ADDRESS(MX51_UART1_BASE_ADDR)
> #endif
> diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
> index ebadf4a..5a7395a 100644
> --- a/arch/arm/plat-mxc/include/mach/hardware.h
> +++ b/arch/arm/plat-mxc/include/mach/hardware.h
> @@ -28,7 +28,7 @@
> (addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0))
>
> #ifdef CONFIG_ARCH_MX5
> -#include <mach/mx51.h>
> +#include <mach/mx5x.h>
> #endif
>
> #ifdef CONFIG_ARCH_MX3
> diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx5x.h
> similarity index 100%
> rename from arch/arm/plat-mxc/include/mach/mx51.h
> rename to arch/arm/plat-mxc/include/mach/mx5x.h
> --
> 1.6.0.4
--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | http://www.pengutronix.de/ |
next prev parent reply other threads:[~2010-10-20 9:01 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-19 21:57 [PATCH] ARM: imx: change mx51.h into mx5x.h Dinh.Nguyen at freescale.com
2010-10-20 9:01 ` Uwe Kleine-König [this message]
2010-10-20 11:35 ` Amit Kucheria
2010-10-20 13:03 ` Nguyen Dinh-R00091
2010-10-20 13:09 ` Uwe Kleine-König
2010-10-20 13:15 ` Nguyen Dinh-R00091
2010-10-20 13:25 ` Uwe Kleine-König
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101020090122.GH28166@pengutronix.de \
--to=u.kleine-koenig@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).