* [GITT PULL] AT91: second pull for 2.6.37 merge window
@ 2010-10-20 11:06 Nicolas Ferre
2010-10-20 19:11 ` Russell King - ARM Linux
0 siblings, 1 reply; 3+ messages in thread
From: Nicolas Ferre @ 2010-10-20 11:06 UTC (permalink / raw)
To: linux-arm-kernel
Hi Russell,
Could you please pull the following:
git://github.com/at91linux/linux-2.6-at91.git for_rmk_bis
This contains second set of AT91 update for 2.6.37
merge window. All has been discussed on the list.
It is based on latest linus' git tree:
commit 51ea8a88aae425915b458bfe295f1f10a3d52781
Nicolas Ferre (3):
AT91: trivial: align comment of at91sam9g20_reset with one more tab
AT91: reset routine cleanup, remove not needed icache flush
AT91: reset: extend alternate reset procedure to several chips
Peter Gsellmann (1):
AT91: add board support for Pcontrol_G20
Peter Horton (1):
AT91: Fix AT91SAM9G20 reset as per the errata in the data sheet
arch/arm/configs/pcontrol_g20_defconfig | 175 +++++++++++++++++
arch/arm/mach-at91/Kconfig | 6 +
arch/arm/mach-at91/Makefile | 13 +-
arch/arm/mach-at91/at91sam9260.c | 7 +-
arch/arm/mach-at91/at91sam9261.c | 7 +-
arch/arm/mach-at91/at91sam9263.c | 7 +-
arch/arm/mach-at91/at91sam9_alt_reset.S | 48 +++++
arch/arm/mach-at91/at91sam9rl.c | 7 +-
arch/arm/mach-at91/board-pcontrol-g20.c | 322 +++++++++++++++++++++++++++++++
arch/arm/mach-at91/generic.h | 3 +
10 files changed, 565 insertions(+), 30 deletions(-)
create mode 100644 arch/arm/configs/pcontrol_g20_defconfig
create mode 100644 arch/arm/mach-at91/at91sam9_alt_reset.S
create mode 100644 arch/arm/mach-at91/board-pcontrol-g20.c
Thanks a lot, best regards,
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 3+ messages in thread
* [GITT PULL] AT91: second pull for 2.6.37 merge window
2010-10-20 11:06 [GITT PULL] AT91: second pull for 2.6.37 merge window Nicolas Ferre
@ 2010-10-20 19:11 ` Russell King - ARM Linux
2010-10-21 10:05 ` Nicolas Ferre
0 siblings, 1 reply; 3+ messages in thread
From: Russell King - ARM Linux @ 2010-10-20 19:11 UTC (permalink / raw)
To: linux-arm-kernel
Did you miss this?
| Tuesday evening my time (BST, so UTC+1h) is the last time I'm merging
| anything into my git tree.
|
| With the upcoming change to the debug macro infrastructure, there are
| two options for people who have new board support code external to my
| tree:
|
| 1. Send me a pull request (based on Linus' tree not mine) by Tuesday.
|
| 2. Eat merge conflicts and build breakage for breakfast when my tree
| merges into mainline. ;)
|
| No further complaints about this please - there's been plenty of warning
| about these debug macro changes.
On Wed, Oct 20, 2010 at 01:06:42PM +0200, Nicolas Ferre wrote:
> Hi Russell,
>
> Could you please pull the following:
>
> git://github.com/at91linux/linux-2.6-at91.git for_rmk_bis
>
> This contains second set of AT91 update for 2.6.37
> merge window. All has been discussed on the list.
> It is based on latest linus' git tree:
> commit 51ea8a88aae425915b458bfe295f1f10a3d52781
>
> Nicolas Ferre (3):
> AT91: trivial: align comment of at91sam9g20_reset with one more tab
> AT91: reset routine cleanup, remove not needed icache flush
> AT91: reset: extend alternate reset procedure to several chips
>
> Peter Gsellmann (1):
> AT91: add board support for Pcontrol_G20
>
> Peter Horton (1):
> AT91: Fix AT91SAM9G20 reset as per the errata in the data sheet
>
> arch/arm/configs/pcontrol_g20_defconfig | 175 +++++++++++++++++
> arch/arm/mach-at91/Kconfig | 6 +
> arch/arm/mach-at91/Makefile | 13 +-
> arch/arm/mach-at91/at91sam9260.c | 7 +-
> arch/arm/mach-at91/at91sam9261.c | 7 +-
> arch/arm/mach-at91/at91sam9263.c | 7 +-
> arch/arm/mach-at91/at91sam9_alt_reset.S | 48 +++++
> arch/arm/mach-at91/at91sam9rl.c | 7 +-
> arch/arm/mach-at91/board-pcontrol-g20.c | 322 +++++++++++++++++++++++++++++++
> arch/arm/mach-at91/generic.h | 3 +
> 10 files changed, 565 insertions(+), 30 deletions(-)
> create mode 100644 arch/arm/configs/pcontrol_g20_defconfig
> create mode 100644 arch/arm/mach-at91/at91sam9_alt_reset.S
> create mode 100644 arch/arm/mach-at91/board-pcontrol-g20.c
>
> Thanks a lot, best regards,
> --
> Nicolas Ferre
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* [GITT PULL] AT91: second pull for 2.6.37 merge window
2010-10-20 19:11 ` Russell King - ARM Linux
@ 2010-10-21 10:05 ` Nicolas Ferre
0 siblings, 0 replies; 3+ messages in thread
From: Nicolas Ferre @ 2010-10-21 10:05 UTC (permalink / raw)
To: linux-arm-kernel
Le 20/10/2010 21:11, Russell King - ARM Linux :
> Did you miss this?
>
> | Tuesday evening my time (BST, so UTC+1h) is the last time I'm merging
> | anything into my git tree.
> |
> | With the upcoming change to the debug macro infrastructure, there are
> | two options for people who have new board support code external to my
> | tree:
> |
> | 1. Send me a pull request (based on Linus' tree not mine) by Tuesday.
> |
> | 2. Eat merge conflicts and build breakage for breakfast when my tree
> | merges into mainline. ;)
> |
> | No further complaints about this please - there's been plenty of warning
> | about these debug macro changes.
Well, no. I had chosen the second option - and I am quite confident with
breakage as I think I have anticipated them...
So, will you do another pull round during Linus' merge window? Reading
your answer I suspect that you will not ;-)
If not I will then directly send the pull request to Linus.
Thanks, bye,
> On Wed, Oct 20, 2010 at 01:06:42PM +0200, Nicolas Ferre wrote:
>> Hi Russell,
>>
>> Could you please pull the following:
>>
>> git://github.com/at91linux/linux-2.6-at91.git for_rmk_bis
>>
>> This contains second set of AT91 update for 2.6.37
>> merge window. All has been discussed on the list.
>> It is based on latest linus' git tree:
>> commit 51ea8a88aae425915b458bfe295f1f10a3d52781
>>
>> Nicolas Ferre (3):
>> AT91: trivial: align comment of at91sam9g20_reset with one more tab
>> AT91: reset routine cleanup, remove not needed icache flush
>> AT91: reset: extend alternate reset procedure to several chips
>>
>> Peter Gsellmann (1):
>> AT91: add board support for Pcontrol_G20
>>
>> Peter Horton (1):
>> AT91: Fix AT91SAM9G20 reset as per the errata in the data sheet
>>
>> arch/arm/configs/pcontrol_g20_defconfig | 175 +++++++++++++++++
>> arch/arm/mach-at91/Kconfig | 6 +
>> arch/arm/mach-at91/Makefile | 13 +-
>> arch/arm/mach-at91/at91sam9260.c | 7 +-
>> arch/arm/mach-at91/at91sam9261.c | 7 +-
>> arch/arm/mach-at91/at91sam9263.c | 7 +-
>> arch/arm/mach-at91/at91sam9_alt_reset.S | 48 +++++
>> arch/arm/mach-at91/at91sam9rl.c | 7 +-
>> arch/arm/mach-at91/board-pcontrol-g20.c | 322 +++++++++++++++++++++++++++++++
>> arch/arm/mach-at91/generic.h | 3 +
>> 10 files changed, 565 insertions(+), 30 deletions(-)
>> create mode 100644 arch/arm/configs/pcontrol_g20_defconfig
>> create mode 100644 arch/arm/mach-at91/at91sam9_alt_reset.S
>> create mode 100644 arch/arm/mach-at91/board-pcontrol-g20.c
>>
>> Thanks a lot, best regards,
>> --
>> Nicolas Ferre
>>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2010-10-21 10:05 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-10-20 11:06 [GITT PULL] AT91: second pull for 2.6.37 merge window Nicolas Ferre
2010-10-20 19:11 ` Russell King - ARM Linux
2010-10-21 10:05 ` Nicolas Ferre
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).