* [PATCH v2] babbage: esdhc device registration @ 2010-10-21 16:55 Shawn Guo 2010-10-21 16:55 ` [PATCH] " Shawn Guo 0 siblings, 1 reply; 3+ messages in thread From: Shawn Guo @ 2010-10-21 16:55 UTC (permalink / raw) To: linux-arm-kernel Update commit message to address Amit Kucheria's review comment. This patch is to add esdhc device registration for babbage board. And it depends on Eric B?nard's patchset below. - cpuimx51: update board support - clock-mx51: factorize clk_set_parent and clk_get_rate - imx-esdhc: update devices registration ^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH] babbage: esdhc device registration 2010-10-21 16:55 [PATCH v2] babbage: esdhc device registration Shawn Guo @ 2010-10-21 16:55 ` Shawn Guo 2010-10-22 6:52 ` Amit Kucheria 0 siblings, 1 reply; 3+ messages in thread From: Shawn Guo @ 2010-10-21 16:55 UTC (permalink / raw) To: linux-arm-kernel Update babbage board support to register esdhc device Signed-off-by: Shawn Guo <shawn.gsc@gmail.com> --- arch/arm/mach-mx5/Kconfig | 1 + arch/arm/mach-mx5/board-mx51_babbage.c | 19 +++++++++++++++++++ 2 files changed, 20 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index a2df9ac..fe96cd2 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -13,6 +13,7 @@ config MACH_MX51_BABBAGE bool "Support MX51 BABBAGE platforms" select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_ESDHC help Include support for MX51 Babbage platform, also known as MX51EVK in u-boot. This includes specific configurations for the board and its diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index 23ee4a4..39304b4 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -112,6 +112,22 @@ static struct pad_desc mx51babbage_pads[] = { /* FEC PHY reset line */ MX51_PAD_EIM_A20__GPIO_2_14, + + /* SD 1 */ + MX51_PAD_SD1_CMD__SD1_CMD, + MX51_PAD_SD1_CLK__SD1_CLK, + MX51_PAD_SD1_DATA0__SD1_DATA0, + MX51_PAD_SD1_DATA1__SD1_DATA1, + MX51_PAD_SD1_DATA2__SD1_DATA2, + MX51_PAD_SD1_DATA3__SD1_DATA3, + + /* SD 2 */ + MX51_PAD_SD2_CMD__SD2_CMD, + MX51_PAD_SD2_CLK__SD2_CLK, + MX51_PAD_SD2_DATA0__SD2_DATA0, + MX51_PAD_SD2_DATA1__SD2_DATA1, + MX51_PAD_SD2_DATA2__SD2_DATA2, + MX51_PAD_SD2_DATA3__SD2_DATA3, }; /* Serial ports */ @@ -304,6 +320,9 @@ static void __init mxc_board_init(void) /* setback USBH1_STP to be function */ mxc_iomux_v3_setup_pad(&usbh1stp); babbage_usbhub_reset(); + + imx51_add_esdhc(0, NULL); + imx51_add_esdhc(1, NULL); } static void __init mx51_babbage_timer_init(void) -- 1.7.1 ^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH] babbage: esdhc device registration 2010-10-21 16:55 ` [PATCH] " Shawn Guo @ 2010-10-22 6:52 ` Amit Kucheria 0 siblings, 0 replies; 3+ messages in thread From: Amit Kucheria @ 2010-10-22 6:52 UTC (permalink / raw) To: linux-arm-kernel On 10 Oct 22, Shawn Guo wrote: > Update babbage board support to register esdhc device > > Signed-off-by: Shawn Guo <shawn.gsc@gmail.com> This looks OK. Acked-by: Amit Kucheria <amit.kucheria@linaro.org> > --- > arch/arm/mach-mx5/Kconfig | 1 + > arch/arm/mach-mx5/board-mx51_babbage.c | 19 +++++++++++++++++++ > 2 files changed, 20 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig > index a2df9ac..fe96cd2 100644 > --- a/arch/arm/mach-mx5/Kconfig > +++ b/arch/arm/mach-mx5/Kconfig > @@ -13,6 +13,7 @@ config MACH_MX51_BABBAGE > bool "Support MX51 BABBAGE platforms" > select IMX_HAVE_PLATFORM_IMX_I2C > select IMX_HAVE_PLATFORM_IMX_UART > + select IMX_HAVE_PLATFORM_ESDHC > help > Include support for MX51 Babbage platform, also known as MX51EVK in > u-boot. This includes specific configurations for the board and its > diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c > index 23ee4a4..39304b4 100644 > --- a/arch/arm/mach-mx5/board-mx51_babbage.c > +++ b/arch/arm/mach-mx5/board-mx51_babbage.c > @@ -112,6 +112,22 @@ static struct pad_desc mx51babbage_pads[] = { > > /* FEC PHY reset line */ > MX51_PAD_EIM_A20__GPIO_2_14, > + > + /* SD 1 */ > + MX51_PAD_SD1_CMD__SD1_CMD, > + MX51_PAD_SD1_CLK__SD1_CLK, > + MX51_PAD_SD1_DATA0__SD1_DATA0, > + MX51_PAD_SD1_DATA1__SD1_DATA1, > + MX51_PAD_SD1_DATA2__SD1_DATA2, > + MX51_PAD_SD1_DATA3__SD1_DATA3, > + > + /* SD 2 */ > + MX51_PAD_SD2_CMD__SD2_CMD, > + MX51_PAD_SD2_CLK__SD2_CLK, > + MX51_PAD_SD2_DATA0__SD2_DATA0, > + MX51_PAD_SD2_DATA1__SD2_DATA1, > + MX51_PAD_SD2_DATA2__SD2_DATA2, > + MX51_PAD_SD2_DATA3__SD2_DATA3, > }; > > /* Serial ports */ > @@ -304,6 +320,9 @@ static void __init mxc_board_init(void) > /* setback USBH1_STP to be function */ > mxc_iomux_v3_setup_pad(&usbh1stp); > babbage_usbhub_reset(); > + > + imx51_add_esdhc(0, NULL); > + imx51_add_esdhc(1, NULL); > } > > static void __init mx51_babbage_timer_init(void) > -- > 1.7.1 > ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2010-10-22 6:52 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2010-10-21 16:55 [PATCH v2] babbage: esdhc device registration Shawn Guo 2010-10-21 16:55 ` [PATCH] " Shawn Guo 2010-10-22 6:52 ` Amit Kucheria
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).