From: ynezz@true.cz (Petr Štetiar)
To: linux-arm-kernel@lists.infradead.org
Subject: ep93xx/ts72xx: Kernel 2.6.36 problems introduced with commit 5bc23d32d
Date: Sun, 31 Oct 2010 20:08:33 +0100 [thread overview]
Message-ID: <20101031190833.GA15069@ibawizard.net> (raw)
In-Reply-To: <20101031190034.GZ15069@ibawizard.net>
Petr ?tetiar <ynezz@true.cz> [2010-10-31 20:00:34]:
> root at ts72xx:~# ifup ra0
> WPA: Configuring Interface
> [ 30.900000] arm_vmregion_alloc() size: 33000
> [ 30.910000] arm_vmregion_alloc() found: start: 4291297280 end: 4291506176 size: 33000
> [ 30.920000] arm_vmregion_alloc() size: 33000
> [ 30.930000] arm_vmregion_alloc() found: start: 4291821568 end: 4292030464 size: 33000
> [ 30.940000] arm_vmregion_alloc() size: 33000
> [ 30.950000] arm_vmregion_alloc() found: start: 4292345856 end: 4292554752 size: 33000
> [ 30.960000] arm_vmregion_alloc() size: 33000
> [ 30.970000] arm_vmregion_alloc() no space!
> [ 30.970000] <-- ERROR in Alloc TX TxContext[3] HTTX_BUFFER !!
Adding vmregion allocs in boot:
[ 2.270000] Registering the dns_resolver key type
[ 2.780000] arm_vmregion_alloc() size: 1000
[ 2.780000] arm_vmregion_alloc() found: start: 4290772992 end: 4290777088 size: 1000
[ 3.810000] IP-Config: Guessing netmask 255.255.255.0
[ 3.810000] IP-Config: Complete:
[ 3.810000] device=eth0, addr=192.168.1.10, mask=255.255.255.0, gw=255.255.255.255,
[ 3.830000] host=192.168.1.10, domain=, nis-domain=(none),
[ 3.840000] bootserver=255.255.255.255, rootserver=192.168.1.90, rootpath=
[ 3.850000] Looking up port of RPC 100003/2 on 192.168.1.90
[ 3.860000] Looking up port of RPC 100005/1 on 192.168.1.90
[ 3.870000] VFS: Mounted root (nfs filesystem) on device 0:13.
[ 3.890000] devtmpfs: mounted
[ 3.890000] Freeing init memory: 112K
[ 4.210000] PHY: 0:01 - Link is Up - 100/Full
INIT: version 2.86 booting
Please wait: booting...
Starting udev
[ 7.040000] udevd (48): /proc/48/oom_adj is deprecated, please use /proc/48/oom_score_adj instead.
[ 11.080000] ep93xx-rtc ep93xx-rtc: rtc core: registered ep93xx-rtc as rtc0
[ 12.840000] rtc-m48t86 rtc-m48t86: rtc core: registered m48t86 as rtc1
[ 12.950000] rtc-m48t86 rtc-m48t86: battery ok
[ 14.410000] usbcore: registered new interface driver usbfs
[ 14.410000] usbcore: registered new interface driver hub
[ 14.470000] usbcore: registered new device driver usb
[ 14.560000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 14.580000] ep93xx-ohci ep93xx-ohci: EP93xx OHCI
[ 14.580000] ep93xx-ohci ep93xx-ohci: new USB bus registered, assigned bus number 1
[ 14.600000] ep93xx-ohci ep93xx-ohci: irq 56, io mem 0x80020000
[ 14.610000] arm_vmregion_alloc() size: 1000
[ 14.610000] arm_vmregion_alloc() found: start: 4290781184 end: 4290785280 size: 1000
[ 14.680000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.690000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.690000] usb usb1: Product: EP93xx OHCI
[ 14.710000] usb usb1: Manufacturer: Linux 2.6.36+ ohci_hcd
[ 14.710000] usb usb1: SerialNumber: ep93xx
[ 14.720000] hub 1-0:1.0: USB hub found
[ 14.730000] hub 1-0:1.0: 3 ports detected
[ 15.070000] usb 1-1: new full speed USB device using ep93xx-ohci and address 2
[ 15.070000] arm_vmregion_alloc() size: 1000
[ 15.070000] arm_vmregion_alloc() found: start: 4290789376 end: 4290793472 size: 1000
[ 15.070000] arm_vmregion_alloc() size: 1000
[ 15.070000] arm_vmregion_alloc() found: start: 4290797568 end: 4290801664 size: 1000
Remounting root file system...
-- ynezz
next prev parent reply other threads:[~2010-10-31 19:08 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-31 18:21 ep93xx/ts72xx: Kernel 2.6.36 problems introduced with commit 5bc23d32d Petr Štetiar
2010-10-31 18:31 ` Russell King - ARM Linux
2010-10-31 19:00 ` Petr Štetiar
2010-10-31 19:08 ` Petr Štetiar [this message]
2010-10-31 20:52 ` Russell King - ARM Linux
2010-10-31 22:30 ` Petr Štetiar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101031190833.GA15069@ibawizard.net \
--to=ynezz@true.cz \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox