From mboxrd@z Thu Jan 1 00:00:00 1970 From: cbouatmailru@gmail.com (Anton Vorontsov) Date: Fri, 5 Nov 2010 10:44:18 +0300 Subject: Booting CNS3420 EVB v 1.3 failed with 2.6.36 (and 2.6.35) In-Reply-To: References: Message-ID: <20101105074418.GA5864@oksana.dev.rtsoft.ru> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, Nov 05, 2010 at 11:08:25AM +0800, Lin Mac wrote: > Here's the my summary: > 1. Booting CNS3420 EVB v 1.3 failed with linux 2.6.36 and .35 I see you use zImage (bootpImage) for booting. The stock U-Boot image from Cavium has incorrect (non-mainline) machid. You have to specify a correct one and thus use uImage. So, you need to build the kernel with the following command: make LOADADDR=0x200000 uImage And boot with these commands: setenv machid ad8 setenv bootargs console=ttyS0,38400 ip=on tftp 100000 uImage bootm 100000 Thanks, -- Anton Vorontsov email: cbouatmailru at gmail.com irc://irc.freenode.net/bd2