[PATCH v3 2/5] OMAP: mailbox: fix rx interrupt disable in omap4

[balbi@ti.com (Felipe Balbi)]

On Thu, Nov 18, 2010 at 01:15:39PM -0600, Hari Kanigeri wrote:
>disabling rx interrupt on omap4 is different than its pre-decessors.
>The bit in OMAP4_MAILBOX_IRQENABLE_CLR should be set to disable the
>interrupts instead of clearing the bit.

How nasty :-p

>Signed-off-by: Hari Kanigeri <h-kanigeri2@ti.com>
>---
> arch/arm/mach-omap2/mailbox.c |    5 ++++-
> 1 files changed, 4 insertions(+), 1 deletions(-)
>
>diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
>index 42dbfa4..82b5ced 100644
>--- a/arch/arm/mach-omap2/mailbox.c
>+++ b/arch/arm/mach-omap2/mailbox.c
>@@ -195,7 +195,10 @@ static void omap2_mbox_disable_irq(struct omap_mbox *mbox,
> 	struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
> 	u32 l, bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
> 	l = mbox_read_reg(p->irqdisable);
>-	l &= ~bit;
>+	if (cpu_is_omap44xx())
>+		l |= bit;
>+	else
>+		l &= ~bit;

you should not use cpu_is_* checks on drivers. Even though this is
located under mach-omap2, it's still a normal driver and you should not
use those checks. Pass a flag like "has_twisted_rx_irq_disable" via
platform_data and use that instead.

-- 
balbi