[PATCH 8/8] ARM: OMAP2: Switch to generic SCU routines

[avorontsov@mvista.com (Anton Vorontsov)]

This shrinks platform-specific code a little bit.

Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
---
 arch/arm/mach-omap2/omap-smp.c |   64 ++--------------------------------------
 1 files changed, 3 insertions(+), 61 deletions(-)

diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 56a8bce..52379c7 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -29,16 +29,6 @@
 /* SCU base address */
 static void __iomem *scu_base;
 
-/*
- * Use SCU config register to count number of cores
- */
-static inline unsigned int get_core_count(void)
-{
-	if (scu_base)
-		return scu_get_core_count(scu_base);
-	return 1;
-}
-
 static DEFINE_SPINLOCK(boot_lock);
 
 void __cpuinit platform_secondary_init(unsigned int cpu)
@@ -112,65 +102,17 @@ static void __init wakeup_secondary(void)
  */
 void __init smp_init_cpus(void)
 {
-	unsigned int i, ncores;
-
 	/* Never released */
 	scu_base = ioremap(OMAP44XX_SCU_BASE, SZ_256);
 	BUG_ON(!scu_base);
 
-	ncores = get_core_count();
-
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
+	scu_init_cpus(scu_base);
 }
 
 void __init smp_prepare_cpus(unsigned int max_cpus)
 {
-	unsigned int ncores = get_core_count();
-	unsigned int cpu = smp_processor_id();
-	int i;
-
-	/* sanity check */
-	if (ncores == 0) {
-		printk(KERN_ERR
-		       "OMAP4: strange core count of 0? Default to 1\n");
-		ncores = 1;
-	}
-
-	if (ncores > NR_CPUS) {
-		printk(KERN_WARNING
-		       "OMAP4: no. of cores (%d) greater than configured "
-		       "maximum of %d - clipping\n",
-		       ncores, NR_CPUS);
-		ncores = NR_CPUS;
-	}
-	smp_store_cpu_info(cpu);
-
-	/*
-	 * are we trying to boot more cores than exist?
-	 */
-	if (max_cpus > ncores)
-		max_cpus = ncores;
+	scu_prepare_cpus(scu_base, max_cpus);
 
-	/*
-	 * Initialise the present map, which describes the set of CPUs
-	 * actually populated at the present time.
-	 */
-	for (i = 0; i < max_cpus; i++)
-		set_cpu_present(i, true);
-
-	if (max_cpus > 1) {
-		/*
-		 * Enable the local timer or broadcast device for the
-		 * boot CPU, but only if we have more than one CPU.
-		 */
-		percpu_timer_setup();
-
-		/*
-		 * Initialise the SCU and wake up the secondary core using
-		 * wakeup_secondary().
-		 */
-		scu_enable(scu_base);
+	if (max_cpus > 1)
 		wakeup_secondary();
-	}
 }
-- 
1.7.0.5