From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/4] omap1: Add initcall checks for omap1 and booted board
Date: Sat, 04 Dec 2010 13:36:55 -0800 [thread overview]
Message-ID: <20101204213655.32208.23030.stgit@baageli.muru.com> (raw)
In-Reply-To: <20101204213358.32208.4195.stgit@baageli.muru.com>
Otherwise multi-omap1 configurations will fail.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap1/board-ams-delta.c | 3 +++
arch/arm/mach-omap1/board-voiceblue.c | 6 ++++++
arch/arm/mach-omap1/devices.c | 3 +++
arch/arm/mach-omap1/lcd_dma.c | 3 +++
arch/arm/mach-omap1/leds.c | 3 +++
arch/arm/mach-omap1/mcbsp.c | 3 +++
arch/arm/mach-omap1/pm.c | 3 +++
arch/arm/mach-omap1/pm_bus.c | 3 +++
arch/arm/mach-omap1/serial.c | 3 +++
9 files changed, 30 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index ce4d69c..e143950 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -338,6 +338,9 @@ static int __init ams_delta_modem_init(void)
{
int err;
+ if (!machine_is_ams_delta())
+ return -ENODEV;
+
omap_cfg_reg(M14_1510_GPIO2);
ams_delta_modem_ports[0].irq =
gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 789f5ba..815a69c 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -83,6 +83,9 @@ static struct platform_device serial_device = {
static int __init ext_uart_init(void)
{
+ if (!machine_is_voiceblue())
+ return -ENODEV;
+
return platform_device_register(&serial_device);
}
arch_initcall(ext_uart_init);
@@ -235,6 +238,9 @@ static struct notifier_block panic_block = {
static int __init voiceblue_setup(void)
{
+ if (!machine_is_voiceblue())
+ return -ENODEV;
+
/* Setup panic notifier */
atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 86ad38a..b0f4c23 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -288,6 +288,9 @@ static inline void omap_init_audio(void) {}
*/
static int __init omap1_init_devices(void)
{
+ if (!cpu_class_is_omap1())
+ return -ENODEV;
+
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/
diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c
index 3be11af..c9088d8 100644
--- a/arch/arm/mach-omap1/lcd_dma.c
+++ b/arch/arm/mach-omap1/lcd_dma.c
@@ -424,6 +424,9 @@ static int __init omap_init_lcd_dma(void)
{
int r;
+ if (!cpu_class_is_omap1())
+ return -ENODEV;
+
if (cpu_is_omap16xx()) {
u16 w;
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
index 277f356..22eb11d 100644
--- a/arch/arm/mach-omap1/leds.c
+++ b/arch/arm/mach-omap1/leds.c
@@ -17,6 +17,9 @@
static int __init
omap_leds_init(void)
{
+ if (!cpu_class_is_omap1())
+ return -ENODEV;
+
if (machine_is_omap_innovator())
leds_event = innovator_leds_event;
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index 372ea71..8209736 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -176,6 +176,9 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
static int __init omap1_mcbsp_init(void)
{
+ if (!cpu_class_is_omap1())
+ return -ENODEV;
+
if (cpu_is_omap7xx()) {
omap_mcbsp_count = OMAP7XX_MCBSP_PDATA_SZ;
omap_mcbsp_cache_size = OMAP7XX_MCBSP_REG_NUM * sizeof(u16);
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index b1d3f9f..0cca23a 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -661,6 +661,9 @@ static int __init omap_pm_init(void)
int error;
#endif
+ if (!cpu_class_is_omap1())
+ return -ENODEV;
+
printk("Power Management for TI OMAP.\n");
/*
diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c
index 8b66392..3266447 100644
--- a/arch/arm/mach-omap1/pm_bus.c
+++ b/arch/arm/mach-omap1/pm_bus.c
@@ -73,6 +73,9 @@ static int __init omap1_pm_runtime_init(void)
const struct dev_pm_ops *pm;
struct dev_pm_ops *omap_pm;
+ if (!cpu_class_is_omap1())
+ return -ENODEV;
+
pm = platform_bus_get_pm_ops();
if (!pm) {
pr_err("%s: unable to get dev_pm_ops from platform_bus\n",
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 9e1c4d4..550ca9d 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -258,6 +258,9 @@ late_initcall(omap_serial_wakeup_init);
static int __init omap_init(void)
{
+ if (!cpu_class_is_omap1())
+ return -ENODEV;
+
return platform_device_register(&serial_device);
}
arch_initcall(omap_init);
next prev parent reply other threads:[~2010-12-04 21:36 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-04 21:36 [PATCH 0/4] Create omap1_defconfig, remove other omap1 configs Tony Lindgren
2010-12-04 21:36 ` [PATCH 1/4] omap: Disable omap_read/write functions for omap2+ Tony Lindgren
2010-12-08 1:29 ` Tony Lindgren
2010-12-08 4:17 ` Tony Lindgren
2010-12-04 21:36 ` Tony Lindgren [this message]
2010-12-10 16:02 ` [PATCH 2/4] omap1: Add initcall checks for omap1 and booted board Janusz Krzysztofik
2010-12-10 19:26 ` Tony Lindgren
2010-12-04 21:36 ` [PATCH 3/4] omap1: Add omap1_defconfig Tony Lindgren
2010-12-07 12:38 ` Felipe Contreras
2010-12-08 2:00 ` Tony Lindgren
2010-12-04 21:37 ` [PATCH 4/4] omap1: Delete old defconfigs Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101204213655.32208.23030.stgit@baageli.muru.com \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).