From: anarsoul@gmail.com (Vasily Khoruzhick)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] h1940-leds: Fix compile issue introduced by latch-related changes
Date: Mon, 6 Dec 2010 18:43:13 +0200 [thread overview]
Message-ID: <201012061843.13558.anarsoul@gmail.com> (raw)
In-Reply-To: <1289248308-21272-2-git-send-email-anarsoul@gmail.com>
On Monday 08 November 2010 22:31:48 Vasily Khoruzhick wrote:
> Latch API was converted to gpiolib API as result we got this compile
> error:
>
> drivers/leds/leds-h1940.c: In function 'h1940_greenled_set':
> drivers/leds/leds-h1940.c:33: error: implicit declaration of function
> 'h1940_latch_control
>
> Adapt h1940-leds driver to new changes and fix compile issue.
>
> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
> ---
> drivers/leds/leds-h1940.c | 67
> ++++++++++++++++++++++++++++++++------------- 1 files changed, 48
> insertions(+), 19 deletions(-)
>
> diff --git a/drivers/leds/leds-h1940.c b/drivers/leds/leds-h1940.c
> index 173d104..d9c2729 100644
> --- a/drivers/leds/leds-h1940.c
> +++ b/drivers/leds/leds-h1940.c
> @@ -30,18 +30,18 @@ static void h1940_greenled_set(struct led_classdev
> *led_dev, {
> switch (value) {
> case LED_HALF:
> - h1940_latch_control(0, H1940_LATCH_LED_FLASH);
> - s3c2410_gpio_setpin(S3C2410_GPA7, 1);
> + gpio_set_value(H1940_LATCH_LED_FLASH, 1);
> + gpio_set_value(S3C2410_GPA(7), 1);
> break;
> case LED_FULL:
> - h1940_latch_control(0, H1940_LATCH_LED_GREEN);
> - s3c2410_gpio_setpin(S3C2410_GPA7, 1);
> + gpio_set_value(H1940_LATCH_LED_GREEN, 1);
> + gpio_set_value(S3C2410_GPA(7), 1);
> break;
> default:
> case LED_OFF:
> - h1940_latch_control(H1940_LATCH_LED_FLASH, 0);
> - h1940_latch_control(H1940_LATCH_LED_GREEN, 0);
> - s3c2410_gpio_setpin(S3C2410_GPA7, 0);
> + gpio_set_value(H1940_LATCH_LED_FLASH, 0);
> + gpio_set_value(H1940_LATCH_LED_GREEN, 0);
> + gpio_set_value(S3C2410_GPA(7), 0);
> break;
> }
> }
> @@ -60,18 +60,18 @@ static void h1940_redled_set(struct led_classdev
> *led_dev, {
> switch (value) {
> case LED_HALF:
> - h1940_latch_control(0, H1940_LATCH_LED_FLASH);
> - s3c2410_gpio_setpin(S3C2410_GPA1, 1);
> + gpio_set_value(H1940_LATCH_LED_FLASH, 1);
> + gpio_set_value(S3C2410_GPA(1), 1);
> break;
> case LED_FULL:
> - h1940_latch_control(0, H1940_LATCH_LED_RED);
> - s3c2410_gpio_setpin(S3C2410_GPA1, 1);
> + gpio_set_value(H1940_LATCH_LED_RED, 1);
> + gpio_set_value(S3C2410_GPA(1), 1);
> break;
> default:
> case LED_OFF:
> - h1940_latch_control(H1940_LATCH_LED_FLASH, 0);
> - h1940_latch_control(H1940_LATCH_LED_RED, 0);
> - s3c2410_gpio_setpin(S3C2410_GPA1, 0);
> + gpio_set_value(H1940_LATCH_LED_FLASH, 0);
> + gpio_set_value(H1940_LATCH_LED_RED, 0);
> + gpio_set_value(S3C2410_GPA(1), 0);
> break;
> }
> }
> @@ -91,11 +91,11 @@ static void h1940_blueled_set(struct led_classdev
> *led_dev, {
> if (value) {
> /* flashing Blue */
> - h1940_latch_control(0, H1940_LATCH_LED_FLASH);
> - s3c2410_gpio_setpin(S3C2410_GPA3, 1);
> + gpio_set_value(H1940_LATCH_LED_FLASH, 1);
> + gpio_set_value(S3C2410_GPA(3), 1);
> } else {
> - h1940_latch_control(H1940_LATCH_LED_FLASH, 0);
> - s3c2410_gpio_setpin(S3C2410_GPA3, 0);
> + gpio_set_value(H1940_LATCH_LED_FLASH, 0);
> + gpio_set_value(S3C2410_GPA(3), 0);
> }
>
> }
> @@ -108,7 +108,24 @@ static struct led_classdev h1940_blueled = {
>
> static int __devinit h1940leds_probe(struct platform_device *pdev)
> {
> - int ret;
> + int ret, gpioidx = 0;
> + int led_gpios[] = {
> + H1940_LATCH_LED_GREEN,
> + H1940_LATCH_LED_RED,
> + H1940_LATCH_LED_FLASH,
> + S3C2410_GPA(1),
> + S3C2410_GPA(3),
> + S3C2410_GPA(7),
> + };
> +
> + for (gpioidx = 0; gpioidx < ARRAY_SIZE(led_gpios); gpioidx++) {
> + ret = gpio_request(led_gpios[gpioidx], "h1940 leds");
> + if (ret < 0)
> + goto err_gpio;
> + ret = gpio_direction_output(led_gpios[gpioidx], 0);
> + if (ret < 0)
> + goto err_gpio;
> + }
>
> ret = led_classdev_register(&pdev->dev, &h1940_greenled);
> if (ret)
> @@ -129,6 +146,10 @@ err_blue:
> err_red:
> led_classdev_unregister(&h1940_greenled);
> err_green:
> +err_gpio:
> + while (--gpioidx >= 0)
> + gpio_free(led_gpios[gpioidx]);
> +
> return ret;
> }
>
> @@ -137,6 +158,14 @@ static int h1940leds_remove(struct platform_device
> *pdev) led_classdev_unregister(&h1940_greenled);
> led_classdev_unregister(&h1940_redled);
> led_classdev_unregister(&h1940_blueled);
> +
> + gpio_free(H1940_LATCH_LED_GREEN);
> + gpio_free(H1940_LATCH_LED_RED);
> + gpio_free(H1940_LATCH_LED_FLASH);
> + gpio_free(S3C2410_GPA(1));
> + gpio_free(S3C2410_GPA(3));
> + gpio_free(S3C2410_GPA(7));
> +
> return 0;
> }
Added Richard Purdie to CC (it seems he changed email address).
Richard, could you review/merge this patch?
Regards
Vasily
next prev parent reply other threads:[~2010-12-06 16:43 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-08 20:31 [PATCH 1/2] ARM: S3C2410: H1940: Adapt h1940-bluetooth to gpiolib changes Vasily Khoruzhick
2010-11-08 20:31 ` [PATCH 2/2] h1940-leds: Fix compile issue introduced by latch-related changes Vasily Khoruzhick
2010-11-15 3:55 ` Kukjin Kim
2010-11-16 23:12 ` Ben Dooks
2010-11-17 6:55 ` Vasily Khoruzhick
2010-12-06 16:43 ` Vasily Khoruzhick [this message]
2010-11-16 9:20 ` [PATCH 1/2] ARM: S3C2410: H1940: Adapt h1940-bluetooth to gpiolib changes Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201012061843.13558.anarsoul@gmail.com \
--to=anarsoul@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).