From: linux@arm.linux.org.uk (Russell King - ARM Linux)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/6] ARM: mx5: use config to define boot related addresses
Date: Thu, 9 Dec 2010 08:44:30 +0000 [thread overview]
Message-ID: <20101209084430.GS9777@n2100.arm.linux.org.uk> (raw)
In-Reply-To: <20101209070411.GH17441@pengutronix.de>
On Thu, Dec 09, 2010 at 08:04:11AM +0100, Uwe Kleine-K?nig wrote:
> Hello,
>
> On Thu, Dec 09, 2010 at 10:08:31PM +0800, Richard Zhao wrote:
> > Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
> > ---
> > This series of patch support mx50 reference design board. I've tested it using
> > initramfs on the board.
> >
> > arch/arm/mach-mx5/Makefile.boot | 6 +++---
> > 1 files changed, 3 insertions(+), 3 deletions(-)
> >
> > diff --git a/arch/arm/mach-mx5/Makefile.boot b/arch/arm/mach-mx5/Makefile.boot
> > index 9939a19..388d2e8 100644
> > --- a/arch/arm/mach-mx5/Makefile.boot
> > +++ b/arch/arm/mach-mx5/Makefile.boot
> > @@ -1,3 +1,3 @@
> > - zreladdr-y := 0x90008000
> > -params_phys-y := 0x90000100
> > -initrd_phys-y := 0x90800000
> > + zreladdr-$(CONFIG_SOC_IMX51) := 0x90008000
> > +params_phys-$(CONFIG_SOC_IMX51) := 0x90000100
> > +initrd_phys-$(CONFIG_SOC_IMX51) := 0x90800000
> That is one of the places that is not multi-soc capable. You can make
> it 66% less worse by just removing params_phys and initrd_phys.
Which then destroys the ability to use the bootp veneer which combines
a kernel and initrd.
next prev parent reply other threads:[~2010-12-09 8:44 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-09 14:08 [PATCH 1/6] ARM: mx5: use config to define boot related addresses Richard Zhao
2010-12-09 7:04 ` Uwe Kleine-König
2010-12-09 7:28 ` Richard Zhao
2010-12-09 8:44 ` Russell King - ARM Linux [this message]
2010-12-09 8:52 ` Uwe Kleine-König
2010-12-09 9:00 ` Russell King - ARM Linux
2010-12-10 5:21 ` Richard Zhao
2010-12-10 8:00 ` Uwe Kleine-König
2010-12-09 14:08 ` [PATCH 2/6] arm: plat-mxc: add full parameter macro to define gpio port Richard Zhao
2010-12-09 7:12 ` Uwe Kleine-König
2010-12-09 14:08 ` [PATCH 3/6] arm: mx51: define mx51's own MXC_GPIO_IRQS Richard Zhao
2010-12-09 14:08 ` [PATCH 4/6] arm: mx5: always use __mxc_cpu_type to check cpu type Richard Zhao
2010-12-09 7:10 ` Uwe Kleine-König
2010-12-09 7:52 ` Richard Zhao
2010-12-09 8:31 ` Uwe Kleine-König
2010-12-09 14:08 ` [PATCH 5/6] arm: mx50: add core functions support Richard Zhao
2010-12-09 8:25 ` Uwe Kleine-König
2010-12-10 7:08 ` Richard Zhao
2010-12-10 8:42 ` Uwe Kleine-König
2010-12-10 9:30 ` Richard Zhao
2010-12-10 10:56 ` Uwe Kleine-König
2010-12-10 12:51 ` Richard Zhao
2010-12-09 9:02 ` Sascha Hauer
2010-12-10 8:03 ` Richard Zhao
2010-12-09 14:08 ` [PATCH 6/6] arm: mx50: add mx50 reference design board support Richard Zhao
2010-12-09 8:29 ` Uwe Kleine-König
2010-12-09 8:51 ` Richard Zhao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101209084430.GS9777@n2100.arm.linux.org.uk \
--to=linux@arm.linux.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).