[PATCH v1 4/9] OMAP2430: hwmod data: add system DMA

[manjugk@ti.com (G, Manjunath Kondaiah)]

On Tue, Dec 14, 2010 at 07:27:33PM -0700, Paul Walmsley wrote:
> On Sat, 4 Dec 2010, G, Manjunath Kondaiah wrote:
> 
> > Add OMAP2430 DMA hwmod data and also add required
> > DMA device attributes.
> 
> ...
> 
> > +/* dma_system -> L3 */
> > +static struct omap_hwmod_ocp_if omap2430_dma_system__l3 = {
> > +	.master		= &omap2430_dma_system_hwmod,
> > +	.slave		= &omap2430_l3_main_hwmod,
> > +	.clk		= "l3_div_ck",
> 
> This clock does not exist on OMAP2430.  Did you test this on OMAP2430?

Yes. I have tested this on SDP2430. For confirmation, I tested again now.
It boots up without any issues and all DMA test cases are passing.

> 
> > +/* l4_cfg -> dma_system */
> > +static struct omap_hwmod_ocp_if omap2430_l4_core__dma_system = {
> > +	.master		= &omap2430_l4_core_hwmod,
> > +	.slave		= &omap2430_dma_system_hwmod,
> > +	.clk		= "l4_div_ck",
> 
> This clock also does not exist on OMAP2430.

ok. I will replace with "sdma_ick" here.

> 
> > +static struct omap_hwmod omap2430_dma_system_hwmod = {
> > +	.name		= "dma",
> > +	.class		= &omap2430_dma_hwmod_class,
> > +	.mpu_irqs	= omap2430_dma_system_irqs,
> > +	.mpu_irqs_cnt	= ARRAY_SIZE(omap2430_dma_system_irqs),
> > +	.main_clk	= "l3_div_ck",
> 
> Nor does this one.

ok. will be replaced with "sdma_fck"

> 
> Please fix these and test on OMAP2430 before resending.

Thanks. I will test again with above changes on SDP2430.

-Manjunath