linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: ben-i2c@fluff.org (Ben Dooks)
To: linux-arm-kernel@lists.infradead.org
Subject: I2C support for CE4100, v3
Date: Wed, 5 Jan 2011 21:51:59 +0000	[thread overview]
Message-ID: <20110105215159.GU817@trinity.fluff.org> (raw)
In-Reply-To: <1294246263-31960-1-git-send-email-bigeasy@linutronix.de>

On Wed, Jan 05, 2011 at 05:50:57PM +0100, Sebastian Andrzej Siewior wrote:
> The I2C core inside CE4100 is very much the same as in PXA25x.
> I Cc the ARM folks because patch 2 reorganizes some files so that they
> can be accessed from x86.
> The I2C device is behind a PCI bus. The PCI probe code simply creates
> three platform devices so we don't have much changes to the platform
> driver. There is no clock framework on x86 and the peripherals don't
> support changing their clocks or to enable/disable them. So I provided
> dummy function which keep the driver happy.
> This series indirectly depends on the SPI series because both modify
> include files and spi & i2c includes are sometimes too close to each
> other.
> 
> History:
> v1: Initial post
> v2: - ISAR is still touched if not in SLAVE mode except on X86 where it
>       is not touched at all.
>     - There are no files created in include/asm
>     - register defines are in common code
>     - the PCI controller now requires a device tree. It is used to obtain
>       an id (which is used as device & i2c bus id).
>     - the PCI part now uses ARRAY_SIZE(). As it turns out pci_select_bars()
>       is not useable.
>     - the patch which resetted the chip if the i2c bus was not available
>       has been dropped.
> v3: - introduced dynamic register mapping. With this change I can avoid
>       accessing the unavailable ISAR register without an #ifdef around
>       it.
>     - modified the DT part of the pci driver to address latest DT review
>       comments.
> 
> The patch series has been created with the -M option so file moves can
> be easily noticed. The whole series (including the spi rename) is also
> available at
>   git://git.linutronix.de/users/bigeasy/soda.git spi-i2c
> 
> Sebastian Andrzej Siewior (6):
>       i2c/pxa: use dynamic register layout
>       arm/pxa2xx: reorganize I2C files
>       i2c/pxa2xx: Add PCI support for PXA I2C controller
>       i2c/pxa2xx: add support for shared IRQ handler
>       i2c/pxa2xx: check timeout correctly
>       i2c/pxa2xx: pass of_node from platform driver to adapter and publish

please rename these i2c-pxa2xx
and for the ARM, use ARM: pxa2xx as the prefix
 
>  arch/arm/mach-mmp/include/mach/mmp2.h              |    2 +-
>  arch/arm/mach-mmp/include/mach/pxa168.h            |    2 +-
>  arch/arm/mach-mmp/include/mach/pxa910.h            |    2 +-
>  arch/arm/mach-pxa/balloon3.c                       |    3 +-
>  arch/arm/mach-pxa/cm-x300.c                        |    2 +-
>  arch/arm/mach-pxa/colibri-pxa270-income.c          |    3 +-
>  arch/arm/mach-pxa/corgi.c                          |    2 +-
>  arch/arm/mach-pxa/csb726.c                         |    2 +-
>  arch/arm/mach-pxa/devices.c                        |    2 +-
>  arch/arm/mach-pxa/em-x270.c                        |    2 +-
>  arch/arm/mach-pxa/ezx.c                            |    2 +-
>  arch/arm/mach-pxa/hx4700.c                         |    2 +-
>  arch/arm/mach-pxa/littleton.c                      |    2 +-
>  arch/arm/mach-pxa/magician.c                       |    2 +-
>  arch/arm/mach-pxa/mainstone.c                      |    2 +-
>  arch/arm/mach-pxa/mioa701.c                        |    2 +-
>  arch/arm/mach-pxa/mxm8x10.c                        |    2 +-
>  arch/arm/mach-pxa/palm27x.c                        |    3 +-
>  arch/arm/mach-pxa/pcm990-baseboard.c               |    2 +-
>  arch/arm/mach-pxa/poodle.c                         |    2 +-
>  arch/arm/mach-pxa/pxa27x.c                         |    2 +-
>  arch/arm/mach-pxa/pxa3xx.c                         |    2 +-
>  arch/arm/mach-pxa/raumfeld.c                       |    2 +-
>  arch/arm/mach-pxa/saar.c                           |    2 +-
>  arch/arm/mach-pxa/spitz.c                          |    3 +-
>  arch/arm/mach-pxa/stargate2.c                      |    2 +-
>  arch/arm/mach-pxa/tavorevb3.c                      |    3 +-
>  arch/arm/mach-pxa/tosa.c                           |    2 +-
>  arch/arm/mach-pxa/trizeps4.c                       |    2 +-
>  arch/arm/mach-pxa/viper.c                          |    2 +-
>  arch/arm/mach-pxa/vpac270.c                        |    3 +-
>  arch/arm/mach-pxa/xcep.c                           |    3 +-
>  arch/arm/mach-pxa/z2.c                             |    3 +-
>  arch/arm/mach-pxa/zeus.c                           |    3 +-
>  arch/arm/mach-pxa/zylonite_pxa300.c                |    2 +-
>  drivers/i2c/busses/Kconfig                         |    7 +-
>  drivers/i2c/busses/Makefile                        |    1 +
>  drivers/i2c/busses/i2c-pxa-pci.c                   |  173 ++++++++++++++++++++
>  drivers/i2c/busses/i2c-pxa.c                       |  116 ++++++++++---
>  .../plat/i2c.h => include/linux/i2c/pxa-i2c.h      |    0
>  40 files changed, 304 insertions(+), 72 deletions(-)
>  create mode 100644 drivers/i2c/busses/i2c-pxa-pci.c
>  rename arch/arm/plat-pxa/include/plat/i2c.h => include/linux/i2c/pxa-i2c.h (100%)
> 
> Sebastian
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
Ben Dooks, ben at fluff.org, http://www.fluff.org/ben/

Large Hadron Colada: A large Pina Colada that makes the universe disappear.

  parent reply	other threads:[~2011-01-05 21:51 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-01-05 16:50 I2C support for CE4100, v3 Sebastian Andrzej Siewior
2011-01-05 16:50 ` [PATCH 1/6] i2c/pxa: use dynamic register layout Sebastian Andrzej Siewior
2011-01-05 16:50 ` [PATCH 2/6] arm/pxa2xx: reorganize I2C files Sebastian Andrzej Siewior
2011-01-05 16:51 ` [PATCH 3/6] i2c/pxa2xx: Add PCI support for PXA I2C controller Sebastian Andrzej Siewior
2011-01-05 20:21   ` Ben Dooks
2011-01-05 22:18     ` Sebastian Andrzej Siewior
2011-01-14 14:31     ` Sebastian Andrzej Siewior
2011-02-07 17:56       ` Sebastian Andrzej Siewior
2011-02-23  1:14         ` Ben Dooks
2011-01-05 23:03   ` Russell King - ARM Linux
2011-01-05 23:08     ` Greg KH
2011-01-06  9:20       ` Russell King - ARM Linux
2011-01-06 21:57         ` Greg KH
2011-01-07 12:31           ` [PATCH] i2c-pxa2xx: " Sebastian Andrzej Siewior
2011-01-06 10:50       ` [PATCH 3/6] i2c/pxa2xx: " Sebastian Andrzej Siewior
2011-01-06 11:12         ` Russell King - ARM Linux
2011-01-06 11:50           ` Sebastian Andrzej Siewior
2011-01-07 15:57             ` Grant Likely
2011-01-05 16:51 ` [PATCH 4/6] i2c/pxa2xx: add support for shared IRQ handler Sebastian Andrzej Siewior
2011-01-05 16:51 ` [PATCH 5/6] i2c/pxa2xx: check timeout correctly Sebastian Andrzej Siewior
2011-01-05 16:51 ` [PATCH 6/6] i2c/pxa2xx: pass of_node from platform driver to adapter and publish Sebastian Andrzej Siewior
2011-01-21 19:32   ` Grant Likely
2011-01-05 21:51 ` Ben Dooks [this message]
2011-01-07 11:20   ` I2C support for CE4100, v3 Sebastian Andrzej Siewior
  -- strict thread matches above, loose matches on Subject: below --
2011-02-23 11:38 Sebastian Andrzej Siewior

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110105215159.GU817@trinity.fluff.org \
    --to=ben-i2c@fluff.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).