From: trenn@suse.de (Thomas Renninger)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] perf: add OMAP support for the new power events
Date: Mon, 10 Jan 2011 15:14:31 +0100 [thread overview]
Message-ID: <201101101514.32355.trenn@suse.de> (raw)
In-Reply-To: <AANLkTi=3pek3+Vv+c1TCxBH2RJcoSXq8TL8CyK9ABMeu@mail.gmail.com>
On Wednesday 05 January 2011 12:05:18 Jean Pihet wrote:
> Hi Paul,
>
> On Tue, Jan 4, 2011 at 7:48 PM, Paul Walmsley <paul@pwsan.com> wrote:
> > Hello Jean,
> >
> > On Tue, 4 Jan 2011, jean.pihet at newoldbits.com wrote:
> >
> >> From: Jean Pihet <j-pihet@ti.com>
> >>
> >> The patch adds the new power management trace points for
> >> the OMAP architecture.
> >>
> >> The trace points are for:
> >> - default idle handler. Since the cpuidle framework is
> >> instrumented in the generic way there is no need to
> >> add trace points in the OMAP specific cpuidle handler;
> >> - cpufreq (DVFS),
> >> - clocks changes (enable, disable, set_rate),
> >
> > A question about these. Are these only meant to track calls to these
> > functions from outside the clock code? Or meant to track actual hardware
> > clock changes?
> The former: this is used to track the clock requests from outside the
> clock framework.
>
> > If the latter, then it might make sense to put these
> > trace points into the functions that actually change the hardware
> > registers, e.g., omap2_dflt_clk_{enable,disable}(), etc., since a
> > clk_enable() on a leaf clock may result in many internal system clocks
> > being enabled up the clock tree.
> I agree with you it is better to track the actual clock changes instead.
> I propose to move the tracepoints to omap2_clk_{enable...} which
> enables all the clocks irrespectively of the installed handler.
> Note about the clock handlers: omap2_dflt_clk_enable happens to be the
> handler for all controllable clocks but could that change in the
> future?
Looks like there is cpuidle34xx using cpuidle framework on specific boards
only.
And pm34xx.c and others override pm_idle and use the same low level
functions to reduce power consumption as cpuidle34xx.
Ideally pm34xx.c (and others) would not override pm_idle, but register as
a cpuidle driver. Then the idle events would be tracked by the
cpuidle subsystem automatically (with my latest patches).
But this would be a more intrusive change (are there efforts to do that?).
Even if it should happen at some point, adding some additional events for
people to better debug/monitor the stuff now does not hurt.
Thomas
next prev parent reply other threads:[~2011-01-10 14:14 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1294136263-24020-1-git-send-email-j-pihet@ti.com>
2011-01-04 10:54 ` [PATCH 2/3] perf: add OMAP support for the new power events jean.pihet at newoldbits.com
2011-01-04 18:48 ` Paul Walmsley
2011-01-05 11:05 ` Jean Pihet
2011-01-10 14:14 ` Thomas Renninger [this message]
2011-01-11 1:24 ` Kevin Hilman
2011-01-10 19:06 ` Paul Walmsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201101101514.32355.trenn@suse.de \
--to=trenn@suse.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).