From: jamie@jamieiles.com (Jamie Iles)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V4 05/62] ST SPEAr: Formalized timer support
Date: Tue, 18 Jan 2011 23:50:29 +0000 [thread overview]
Message-ID: <20110118235029.GA2209@gallagher> (raw)
In-Reply-To: <b14dc485b365aa736f07bf0f684198e66ef06e16.1295333958.git.viresh.kumar@st.com>
Hi,
On Tue, Jan 18, 2011 at 12:41:33PM +0530, Viresh Kumar wrote:
> --- a/arch/arm/mach-spear3xx/spear3xx.c
> +++ b/arch/arm/mach-spear3xx/spear3xx.c
> @@ -523,5 +523,35 @@ struct pmx_dev pmx_plgpio_45_46_49_50 = {
> .mode_count = ARRAY_SIZE(pmx_plgpio_45_46_49_50_modes),
> .enb_on_reset = 1,
> };
> +#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
>
> -#endif
> +static void __init spear3xx_timer_init(void)
> +{
> + char pclk_name[] = "pll3_48m_clk";
> + struct clk *gpt_clk, *pclk;
> +
> + /* get the system timer clock */
> + gpt_clk = clk_get_sys("gpt0", NULL);
> + if (!gpt_clk) {
> + pr_err("%s:couldn't get clk for gpt\n", __func__);
> + BUG();
> + }
> +
> + /* get the suitable parent clock for timer*/
> + pclk = clk_get(NULL, pclk_name);
> + if (!pclk) {
> + pr_err("%s:couldn't get %s as parent for gpt\n",
> + __func__, pclk_name);
> + BUG();
> + }
These should probably be using IS_ERR() rather than checking against NULL to
be consistent with the API.
[...]
> diff --git a/arch/arm/mach-spear6xx/spear600_evb.c b/arch/arm/mach-spear6xx/spear600_evb.c
> index daff8d0..bdd5b76 100644
> --- a/arch/arm/mach-spear6xx/spear600_evb.c
> +++ b/arch/arm/mach-spear6xx/spear600_evb.c
> @@ -42,10 +42,11 @@ static void __init spear600_evb_init(void)
> amba_device_register(amba_devs[i], &iomem_resource);
> }
>
> +
Nitpick, why the extra newline?
> MACHINE_START(SPEAR600, "ST-SPEAR600-EVB")
> .boot_params = 0x00000100,
> .map_io = spear6xx_map_io,
> .init_irq = spear6xx_init_irq,
> - .timer = &spear_sys_timer,
> + .timer = &spear6xx_timer,
> .init_machine = spear600_evb_init,
> MACHINE_END
> diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
> index f2fe14e..ea4c356 100644
> --- a/arch/arm/mach-spear6xx/spear6xx.c
> +++ b/arch/arm/mach-spear6xx/spear6xx.c
> @@ -155,3 +155,34 @@ void __init spear6xx_map_io(void)
> /* This will initialize clock framework */
> clk_init();
> }
> +
> +static void __init spear6xx_timer_init(void)
> +{
> + char pclk_name[] = "pll3_48m_clk";
> + struct clk *gpt_clk, *pclk;
> +
> + /* get the system timer clock */
> + gpt_clk = clk_get_sys("gpt0", NULL);
> + if (!gpt_clk) {
> + pr_err("%s:couldn't get clk for gpt\n", __func__);
> + BUG();
> + }
> +
> + /* get the suitable parent clock for timer*/
> + pclk = clk_get(NULL, pclk_name);
> + if (!pclk) {
> + pr_err("%s:couldn't get %s as parent for gpt\n",
> + __func__, pclk_name);
> + BUG();
> + }
As above, IS_ERR() would be better here.
Jamie
next prev parent reply other threads:[~2011-01-18 23:50 UTC|newest]
Thread overview: 90+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-18 7:11 [PATCH V4 00/62] Updating SPEAr Support Viresh Kumar
2011-01-18 7:11 ` [PATCH V4 01/62] spear/vmalloc.h: Appending UL to VMALLOC_END Viresh Kumar
2011-01-18 7:11 ` [PATCH V4 02/62] sp810 Fix: Switch to slow mode before sysctl_soft_reset Viresh Kumar
2011-01-18 7:11 ` [PATCH V4 03/62] ST SPEAr: Padmux code Updated Viresh Kumar
2011-01-18 7:11 ` [PATCH V4 04/62] ST SPEAr: Making clock functions more generic Viresh Kumar
2011-01-18 15:56 ` Russell King - ARM Linux
2011-01-19 4:03 ` viresh kumar
2011-01-18 7:11 ` [PATCH V4 05/62] ST SPEAr: Formalized timer support Viresh Kumar
2011-01-18 23:50 ` Jamie Iles [this message]
2011-01-19 3:53 ` viresh kumar
2011-01-18 7:11 ` [PATCH V4 06/62] ST SPEAr13XX: Adding machine specific header files Viresh Kumar
2011-01-18 16:00 ` Russell King - ARM Linux
2011-01-19 4:38 ` viresh kumar
2011-01-19 9:02 ` viresh kumar
2011-01-18 7:11 ` [PATCH V4 07/62] ST SPEAr13XX: Adding machine specific src files Viresh Kumar
2011-01-18 16:06 ` Russell King - ARM Linux
2011-01-19 6:03 ` Shiraz Hashim
2011-01-19 8:52 ` Russell King - ARM Linux
2011-01-19 9:20 ` Shiraz Hashim
2011-01-18 7:11 ` [PATCH V4 08/62] ST SPEAr: Adding support for SPEAr13xx SoC in spear generic plat/ Viresh Kumar
2011-01-18 7:11 ` [PATCH V4 09/62] ST SPEAr13XX: Added compilation support in arch/arm/ Viresh Kumar
2011-01-18 7:11 ` [PATCH V4 10/62] ST SPEAr13xx: Adding default config file Viresh Kumar
2011-01-18 7:11 ` [PATCH V4 11/62] ST SPEAr: Adding support for CLCD on SPEAr3xx/6xx Viresh Kumar
2011-01-18 7:11 ` [PATCH V4 12/62] ST SPEAr: Updating Clock Support Viresh Kumar
2011-01-18 7:11 ` [PATCH V4 13/62] ST SPEAr: Adding Debugfs support on clock framework Viresh Kumar
2011-01-18 7:11 ` [PATCH V4 14/62] ST SPEAr: Correcting SOC Config base address for spear320 Viresh Kumar
2011-01-18 7:11 ` [PATCH V4 15/62] ST SPEAr: Adding PLGPIO driver for spear platform Viresh Kumar
2011-01-18 7:11 ` [PATCH V4 17/62] ST SPEAr: Adding machine support for rtc-spear Viresh Kumar
2011-01-18 7:11 ` [PATCH V4 18/62] ST SPEAr: adding support for synopsis i2c designware Viresh Kumar
2011-01-18 7:11 ` [PATCH V4 19/62] ST SPEAr: Adding machine support for USB host Viresh Kumar
2011-01-18 7:11 ` [PATCH V4 20/62] ST SPEAr: Adding machine support for keyboard Viresh Kumar
2011-01-18 7:11 ` [PATCH V4 21/62] ST SPEAr: Added ARM PL061 GPIO Support on SPEAr13xx and modified resource size Viresh Kumar
2011-01-18 7:11 ` [PATCH V4 22/62] ST SPEAr: Adding support for ST's PWM IP Viresh Kumar
2011-01-18 7:11 ` [PATCH V4 23/62] ST SPEAr: Adding Watchdog support Viresh Kumar
2011-01-18 7:11 ` [PATCH V4 24/62] ST SPEAr: Adding machine support for nand Viresh Kumar
2011-01-18 7:11 ` [PATCH V4 25/62] ST SPEAr: Added PCIE host controller base driver support Viresh Kumar
2011-01-19 0:05 ` Russell King - ARM Linux
2011-01-19 4:17 ` viresh kumar
2011-01-18 7:11 ` [PATCH V4 26/62] ST SPEAr: Adding support for SSP PL022 Viresh Kumar
2011-01-18 16:18 ` Russell King - ARM Linux
2011-01-19 4:16 ` viresh kumar
2011-01-18 7:11 ` [PATCH V4 27/62] ST SPEAr: Adding support for SDHCI (SDIO) Viresh Kumar
2011-01-18 7:11 ` [PATCH V4 28/62] ST SPEAr: Changing resource size of amba devices to SZ_4K Viresh Kumar
2011-01-18 7:11 ` [PATCH V4 29/62] ST SPEAr: Replacing SIZE macro's with actual required size Viresh Kumar
2011-01-18 7:11 ` [PATCH V4 30/62] SPEAr: defines base addresses as ulong Viresh Kumar
2011-01-18 7:11 ` [PATCH V4 31/62] ST SPEAr: Adding miscellaneous devices Viresh Kumar
2011-01-18 7:11 ` [PATCH V4 32/62] ST SPEAr 13xx : Adding support for SPEAr1310 Viresh Kumar
2011-01-19 0:09 ` Jamie Iles
2011-01-19 4:39 ` viresh kumar
2011-01-19 6:40 ` viresh kumar
2011-01-19 8:29 ` Jamie Iles
2011-01-18 7:12 ` [PATCH V4 33/62] SPEAr320: Adding support for CAN Viresh Kumar
2011-01-18 7:12 ` [PATCH V4 34/62] ST SPEAr: Adding support for DDR in clock framework Viresh Kumar
2011-01-18 7:12 ` [PATCH V4 35/62] ST SPEAr : EMI (Extrenal Memory Interface) controller driver Viresh Kumar
2011-01-18 7:12 ` [PATCH V4 36/62] SPEAr Clock Framework: Adding support for PLL frequency change Viresh Kumar
2011-01-18 7:12 ` [PATCH V4 37/62] SPEAr Power Management: Added the support for Standby mode Viresh Kumar
2011-01-18 7:12 ` [PATCH V4 38/62] SPEAr CPU freq: Adding support for CPU Freq framework Viresh Kumar
2011-01-19 0:20 ` Jamie Iles
2011-01-19 2:13 ` deepaksi
2011-01-19 8:35 ` Jamie Iles
2011-01-19 9:00 ` Shiraz Hashim
2011-01-19 9:39 ` Shiraz Hashim
2011-01-19 9:53 ` Russell King - ARM Linux
2011-01-19 11:14 ` viresh kumar
2011-01-18 7:12 ` [PATCH V4 39/62] ST SPEAr13xx: Adding CPU hotplug support added for SMP platforms Viresh Kumar
2011-01-18 7:12 ` [PATCH V4 40/62] ST SPEAr: replace readl, writel with readl_relaxed, writel_relaxed in uncompress.h Viresh Kumar
2011-01-18 7:12 ` [PATCH V4 41/62] ST SPEAr13xx: add L2 cache support Viresh Kumar
2011-01-18 7:12 ` [PATCH V4 42/62] ST SPEAr13xx: Modified static mappings Viresh Kumar
2011-01-18 7:12 ` [PATCH V4 43/62] SPEAr1310: Adding Static Mapping for RAS Area Viresh Kumar
2011-01-18 7:12 ` [PATCH V4 44/62] SPEAr: Adding and Updating Clock definitions Viresh Kumar
2011-01-18 7:12 ` [PATCH V4 45/62] SPEAr : Pad multiplexing handling modified Viresh Kumar
2011-01-18 7:12 ` [PATCH V4 46/62] SPEAr13xx : Fixed part devices in SPEAr13xx addded to the generic implementation Viresh Kumar
2011-01-18 7:12 ` [PATCH V4 47/62] SPEAr : Updating pad multiplexing support Viresh Kumar
2011-01-18 7:12 ` [PATCH V4 48/62] ST SPEAr3xx: Passing pmx devices address from machine *.c files Viresh Kumar
2011-01-18 7:12 ` [PATCH V4 49/62] ST SPEAr Clock Framework: Updating for single image solution Viresh Kumar
2011-01-18 7:12 ` [PATCH V4 50/62] SPEAr3xx: Make local structures static Viresh Kumar
2011-01-18 7:12 ` [PATCH V4 51/62] SPEAR3xx: Rename register/irq defines to remove naming conflicts Viresh Kumar
2011-01-18 7:12 ` [PATCH V4 52/62] SPEAr3xx: Rework pmx_dev code to remove conflicts Viresh Kumar
2011-01-18 7:12 ` [PATCH V4 53/62] SPEAr3xx: Rework KConfig to allow all boards to be compiled in Viresh Kumar
2011-01-18 7:12 ` [PATCH V4 54/62] SPEAr3xx: Replace defconfigs with single unified defconfig Viresh Kumar
2011-01-18 7:12 ` [PATCH V4 55/62] ST SPEAr: Appending spear3** with global structures Viresh Kumar
2011-01-18 7:12 ` [PATCH V4 56/62] ST SPEAr3xx: Updating plgpio and emi source to make it compliant with single image strategy Viresh Kumar
2011-01-18 7:12 ` [PATCH V4 57/62] SPEAr6xx: Rework Kconfig for single image solution Viresh Kumar
2011-01-18 7:12 ` [PATCH V4 58/62] ST SPEAR6xx: renaming spear600_defconfig as spear6xx_defconfig Viresh Kumar
2011-01-18 7:12 ` [PATCH V4 59/62] ST SPEAr13xx: Pass default padmux settings as parameter to spear13**_init routine Viresh Kumar
2011-01-18 7:12 ` [PATCH V4 60/62] ST SPEAr: Adding devices & clocks Viresh Kumar
2011-01-18 7:12 ` [PATCH V4 61/62] ST SPEAr: Adding information in Documentation/ and MAINTAINERS Viresh Kumar
2011-01-18 7:12 ` [PATCH V4 62/62] ST SPEAr: Updating defconfigs Viresh Kumar
2011-01-18 15:53 ` [PATCH V4 00/62] Updating SPEAr Support Russell King - ARM Linux
2011-01-19 3:49 ` viresh kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110118235029.GA2209@gallagher \
--to=jamie@jamieiles.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).