[PATCH 1/2] ARM: imx53_loco: remove inavailable uart device and remove rts/cts support

[s.hauer@pengutronix.de (Sascha Hauer)]

Richard,

Fabio posted a very similar patch. Please coordinate what should be done
here.

Sascha

On Thu, Jan 27, 2011 at 05:19:03PM +0800, Richard Zhao wrote:
> imx53_loco board only have one uart and the uart don't export rts/cts lines.
> 
> Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
> ---
>  arch/arm/mach-mx5/board-mx53_loco.c |   20 +-------------------
>  1 files changed, 1 insertions(+), 19 deletions(-)
> 
> diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
> index d1348e0..d0ca65b 100644
> --- a/arch/arm/mach-mx5/board-mx53_loco.c
> +++ b/arch/arm/mach-mx5/board-mx53_loco.c
> @@ -41,29 +41,11 @@
>  static iomux_v3_cfg_t mx53_loco_pads[] = {
>  	MX53_PAD_CSI0_D10__UART1_TXD,
>  	MX53_PAD_CSI0_D11__UART1_RXD,
> -	MX53_PAD_ATA_DIOW__UART1_TXD,
> -	MX53_PAD_ATA_DMACK__UART1_RXD,
> -
> -	MX53_PAD_ATA_BUFFER_EN__UART2_RXD,
> -	MX53_PAD_ATA_DMARQ__UART2_TXD,
> -	MX53_PAD_ATA_DIOR__UART2_RTS,
> -	MX53_PAD_ATA_INTRQ__UART2_CTS,
> -
> -	MX53_PAD_ATA_CS_0__UART3_TXD,
> -	MX53_PAD_ATA_CS_1__UART3_RXD,
> -	MX53_PAD_ATA_DA_1__UART3_CTS,
> -	MX53_PAD_ATA_DA_2__UART3_RTS,
> -};
> -
> -static const struct imxuart_platform_data mx53_loco_uart_data __initconst = {
> -	.flags = IMXUART_HAVE_RTSCTS,
>  };
>  
>  static inline void mx53_loco_init_uart(void)
>  {
> -	imx53_add_imx_uart(0, &mx53_loco_uart_data);
> -	imx53_add_imx_uart(1, &mx53_loco_uart_data);
> -	imx53_add_imx_uart(2, &mx53_loco_uart_data);
> +	imx53_add_imx_uart(0, NULL);
>  }
>  
>  static inline void mx53_loco_fec_reset(void)
> -- 
> 1.6.3.3
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |