From mboxrd@z Thu Jan  1 00:00:00 1970
From: linuxzsc@gmail.com (Richard Zhao)
Date: Thu, 27 Jan 2011 20:19:28 +0800
Subject: [PATCH 1/3] ARM: mach-mx5: Fix build for mx53_loco and mx53_smd
In-Reply-To: <4D415BA2.2020207@freescale.com>
References: <1295968115-11447-1-git-send-email-fabio.estevam@freescale.com>
	<20110127073009.GR9041@pengutronix.de>
	<20110127093044.GA30756@shlinux1.ap.freescale.net>
	<4D415BA2.2020207@freescale.com>
Message-ID: <20110127121928.GA1948@richard-laptop>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Thu, Jan 27, 2011 at 09:48:50AM -0200, Fabio Estevam wrote:
> Hi Richard,
> 
> On 1/27/2011 7:30 AM, Richard Zhao wrote:
> ....
> >>>  static iomux_v3_cfg_t mx53_loco_pads[] = {
> >>> -	MX53_PAD_CSI0_D10__UART1_TXD,
> >>> -	MX53_PAD_CSI0_D11__UART1_RXD,
> >>> -	MX53_PAD_ATA_DIOW__UART1_TXD,
> >>> -	MX53_PAD_ATA_DMACK__UART1_RXD,
> >>> -
> >>> -	MX53_PAD_ATA_BUFFER_EN__UART2_RXD,
> >>> -	MX53_PAD_ATA_DMARQ__UART2_TXD,
> >>> -	MX53_PAD_ATA_DIOR__UART2_RTS,
> >>> -	MX53_PAD_ATA_INTRQ__UART2_CTS,
> >>> -
> >>> -	MX53_PAD_ATA_CS_0__UART3_TXD,
> >>> -	MX53_PAD_ATA_CS_1__UART3_RXD,
> >>> -	MX53_PAD_ATA_DA_1__UART3_CTS,
> >>> -	MX53_PAD_ATA_DA_2__UART3_RTS,
> >>> +	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
> >>> +	MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
> >>> +	MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
> >>> +	MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
> > So many Pad configured to uart1?
> 
> As per the subject the intention of this patch is to fix the build for mx53_loco and mx53_smd.
> 
> In this patch I just changed the pad names to fix the build issue. 
> 
> 
> >>> +
> >>> +	MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
> >>> +	MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
> >>> +	MX53_PAD_PATA_DIOR__UART2_RTS,
> >>> +	MX53_PAD_PATA_INTRQ__UART2_CTS,
> >>> +
> >>> +	MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
> >>> +	MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
> >>> +	MX53_PAD_PATA_DA_1__UART3_CTS,
> >>> +	MX53_PAD_PATA_DA_2__UART3_RTS,
> > LoCo don't have uart2 and uart3.
> 
> Right, these are removed later in my patch series.
I didn't see your patch series in my freescale mailbox, until Sascha replied. 
> 
> After my patch series is applied we have a working UART1 console.
> 
> Can we apply them? 
Sure. My two coins, why don't you squash patch 2 and 3. They're both small and
modifying the same thing. It don't matter much. If you choose to send it again,
you can merge my second patch.
> 
> Regards,
> 
> Fabio Estevam
> >>> +
> >>>  };
> >>>  
> >>>  static const struct imxuart_platform_data mx53_loco_uart_data __initconst = {
> >>> diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
> >>> index 7970f7a..06070c5 100644
> >>> --- a/arch/arm/mach-mx5/board-mx53_smd.c
> >>> +++ b/arch/arm/mach-mx5/board-mx53_smd.c
> >>> @@ -39,20 +39,20 @@
> >>>  #define SMD_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
> >>>  
> >>>  static iomux_v3_cfg_t mx53_smd_pads[] = {
> >>> -	MX53_PAD_CSI0_D10__UART1_TXD,
> >>> -	MX53_PAD_CSI0_D11__UART1_RXD,
> >>> -	MX53_PAD_ATA_DIOW__UART1_TXD,
> >>> -	MX53_PAD_ATA_DMACK__UART1_RXD,
> >>> -
> >>> -	MX53_PAD_ATA_BUFFER_EN__UART2_RXD,
> >>> -	MX53_PAD_ATA_DMARQ__UART2_TXD,
> >>> -	MX53_PAD_ATA_DIOR__UART2_RTS,
> >>> -	MX53_PAD_ATA_INTRQ__UART2_CTS,
> >>> -
> >>> -	MX53_PAD_ATA_CS_0__UART3_TXD,
> >>> -	MX53_PAD_ATA_CS_1__UART3_RXD,
> >>> -	MX53_PAD_ATA_DA_1__UART3_CTS,
> >>> -	MX53_PAD_ATA_DA_2__UART3_RTS,
> >>> +	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
> >>> +	MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
> >>> +	MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
> >>> +	MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
> > same as above.
will you fix iomux issue here? I didn't see any other fix in your patch series.

Thanks
Richard
> > 
> > Thanks
> > Richard
> >>> +
> >>> +	MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
> >>> +	MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
> >>> +	MX53_PAD_PATA_DIOR__UART2_RTS,
> >>> +	MX53_PAD_PATA_INTRQ__UART2_CTS,
> >>> +
> >>> +	MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
> >>> +	MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
> >>> +	MX53_PAD_PATA_DA_1__UART3_CTS,
> >>> +	MX53_PAD_PATA_DA_2__UART3_RTS,
> >>>  };
> >>>  
> >>>  static const struct imxuart_platform_data mx53_smd_uart_data __initconst = {
> >>> -- 
> >>> 1.6.0.4
> >>>
> >>>
> >>>
> >>
> >> -- 
> >> Pengutronix e.K.                           |                             |
> >> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> >> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> >> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> >>
> >> _______________________________________________
> >> linux-arm-kernel mailing list
> >> linux-arm-kernel at lists.infradead.org
> >> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> >>
> 
> 
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel