From: u.kleine-koenig@pengutronix.de (Uwe Kleine-König)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] mx31: add support for the bugbase 1.3 from buglabs
Date: Fri, 11 Feb 2011 22:39:54 +0100 [thread overview]
Message-ID: <20110211213954.GK27982@pengutronix.de> (raw)
In-Reply-To: <1297458816.18578.5.camel@gnutoo-laptop>
On Fri, Feb 11, 2011 at 10:13:36PM +0100, Denis 'GNUtoo' Carikli wrote:
> > diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
> > index e634d6c..b45f534 100644
> > --- a/arch/arm/plat-mxc/include/mach/uncompress.h
> > +++ b/arch/arm/plat-mxc/include/mach/uncompress.h
> > @@ -62,6 +62,7 @@ static inline void flush(void)
> > #define MX2X_UART1_BASE_ADDR 0x1000a000
> > #define MX3X_UART1_BASE_ADDR 0x43F90000
> > #define MX3X_UART2_BASE_ADDR 0x43F94000
> > +#define MX3X_UART5_BASE_ADDR 0x43FB4000
> > #define MX51_UART1_BASE_ADDR 0x73fbc000
> > #define MX50_UART1_BASE_ADDR 0x53fbc000
> > #define MX53_UART1_BASE_ADDR 0x53fbc000
> > @@ -102,6 +103,9 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
> > case MACH_TYPE_MAGX_ZN5:
> > uart_base = MX3X_UART2_BASE_ADDR;
> > break;
> > + case MACH_TYPE_BUG:
> > + uart_base = MX3X_UART5_BASE_ADDR;
> > + break;
> > case MACH_TYPE_MX51_BABBAGE:
> > case MACH_TYPE_EUKREA_CPUIMX51SD:
> > case MACH_TYPE_MX51_3DS:
> That seem not to crash, but I wonder if it's really useful:
> Basically I see u-boot loading the kernel, then I have
> > Uncompressing Linux...
> Then I wait some seconds
> Then I see that line beeing complretted with:
> > done, booting the kernel.
> Then the rest of the messages are displayed very fast,
> along with initramfs loading messages and I finally get a shell.
That means you'd prefer no output? Some time ago we even got some more
dots during decompression, I'd like to get these back.
The only downside of these outputs I can imagine is to save the time it
takes to get them out of the serial. But if you really care, you might
want to evaluate the possibility to let U-Boot uncompress your kernel.
(Depending on some parameters of your hardware this might or might not
be faster for you.)
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | http://www.pengutronix.de/ |
next prev parent reply other threads:[~2011-02-11 21:39 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-10 21:15 [PATCH] mx31: add support for the bugbase 1.3 from buglabs Denis 'GNUtoo' Carikli
2011-02-10 21:41 ` Marc Kleine-Budde
2011-02-11 2:42 ` Fabio Estevam
2011-02-11 8:10 ` Uwe Kleine-König
2011-02-11 9:21 ` [PATCH 1/3] ARM: mx3+mx5: rename to ${machine}_init Uwe Kleine-König
2011-02-11 9:23 ` [PATCH 1/3 v2] ARM: mx3+mx5: rename mxc_board_init " Uwe Kleine-König
2011-02-11 9:21 ` [PATCH 2/3] ARM: mx3: remove some useless comments Uwe Kleine-König
2011-02-11 9:21 ` [PATCH 3/3] ARM: mx3/mx31ads: fix comments of irq callbacks Uwe Kleine-König
2011-02-11 21:06 ` [PATCH] mx31: add support for the bugbase 1.3 from buglabs Denis 'GNUtoo' Carikli
2011-02-11 21:09 ` Denis 'GNUtoo' Carikli
2011-02-11 21:13 ` Denis 'GNUtoo' Carikli
2011-02-11 21:39 ` Uwe Kleine-König [this message]
2011-02-11 23:06 ` Denis 'GNUtoo' Carikli
2011-02-13 21:12 ` Uwe Kleine-König
2011-02-11 21:30 ` Marc Kleine-Budde
2011-02-12 20:15 ` Denis 'GNUtoo' Carikli
2011-02-11 21:33 ` Uwe Kleine-König
2011-02-12 21:16 ` [PATCHv3] " Denis 'GNUtoo' Carikli
2011-02-13 21:18 ` Uwe Kleine-König
2011-02-14 1:12 ` Denis 'GNUtoo' Carikli
2011-02-17 15:23 ` Denis 'GNUtoo' Carikli
2011-02-17 22:53 ` Uwe Kleine-König
2011-02-18 5:47 ` [bug-dev] " Ken Gilmer
2011-02-18 21:22 ` [PATCH] " Denis 'GNUtoo' Carikli
2011-02-18 21:38 ` Uwe Kleine-König
-- strict thread matches above, loose matches on Subject: below --
2011-01-22 20:42 Denis 'GNUtoo' Carikli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110211213954.GK27982@pengutronix.de \
--to=u.kleine-koenig@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).