From: paul@pwsan.com (Paul Walmsley)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx
Date: Tue, 15 Feb 2011 23:52:39 -0700 [thread overview]
Message-ID: <20110216065030.22089.61217.stgit@twilight.localdomain> (raw)
Hello,
This patch series adds clock framework-controlled autoidle support for
the OMAP2xxx DPLL, APLLs, and OMAP2/3 interface clocks. The old
direct register writes in the PM code to enable clock autoidle have been
removed.
This series also ensures that all clock autoidle is disabled during
boot and only re-enabled if CONFIG_PM is enabled.
The series applies on the 'clk_autoidle_a_2.6.39' branch of
git://git.pwsan.com/linux-2.6.
Boot-tested on N800, and dynamic idle-tested on OMAP3430 Beagleboard.
Compile-tested with omap1_defconfig, omap2plus_defconfig, a 5912
OSK-only config, an N8x0-only config, an OMAP3-only config, and an OMAP4-only
config.
- Paul
---
clk_autoidle_b_2.6.39
text data bss dec hex filename
5530703 330544 5594520 11455767 aecd17 vmlinux.omap2plus_defconfig.orig
5531167 330544 5594520 11456231 aecee7 vmlinux.omap2plus_defconfig.patched
Paul Walmsley (11):
OMAP2+: clock: disable autoidle on all clocks during clock init
OMAP2: clock: add DPLL autoidle support
OMAP2xxx: clock: add clockfw autoidle support for APLLs
OMAP2+: clock: comment that osc_ck/osc_sys_ck should use clockfw autoidle control
OMAP2+: clock: add interface clock type code with autoidle support
OMAP2420: clock: add sdrc_ick
OMAP2420: clock: use autoidle clkops for all autoidle-controllable interface clocks
OMAP2430/3xxx: clock: add modem clock autoidle support
OMAP2430: clock: use autoidle clkops for all autoidle-controllable interface clocks
OMAP3: clock: use autoidle clkops for all autoidle-controllable interface clocks
OMAP2/3: PM: remove manual CM_AUTOIDLE bit setting in mach-omap2/pm*xx.c
arch/arm/mach-omap2/Makefile | 7 +
arch/arm/mach-omap2/clkt2xxx_apll.c | 24 +++++
arch/arm/mach-omap2/clkt2xxx_dpll.c | 63 +++++++++++++
arch/arm/mach-omap2/clkt2xxx_osc.c | 14 +++
arch/arm/mach-omap2/clkt_iclk.c | 82 +++++++++++++++++
arch/arm/mach-omap2/clock.h | 11 ++
arch/arm/mach-omap2/clock2420_data.c | 130 +++++++++++++++++-----------
arch/arm/mach-omap2/clock2430_data.c | 130 ++++++++++++++++------------
arch/arm/mach-omap2/clock34xx.c | 29 ++++++
arch/arm/mach-omap2/clock34xx.h | 5 +
arch/arm/mach-omap2/clock3517.c | 4 +
arch/arm/mach-omap2/clock3xxx.c | 3 -
arch/arm/mach-omap2/clock3xxx_data.c | 155 +++++++++++++++++----------------
arch/arm/mach-omap2/clock44xx_data.c | 3 +
arch/arm/mach-omap2/cm-regbits-24xx.h | 3 +
arch/arm/mach-omap2/cm2xxx_3xxx.c | 69 +++++++++++++++
arch/arm/mach-omap2/cm2xxx_3xxx.h | 8 ++
arch/arm/mach-omap2/pm24xx.c | 69 +--------------
arch/arm/mach-omap2/pm34xx.c | 105 ----------------------
19 files changed, 557 insertions(+), 357 deletions(-)
create mode 100644 arch/arm/mach-omap2/clkt2xxx_dpll.c
create mode 100644 arch/arm/mach-omap2/clkt_iclk.c
next reply other threads:[~2011-02-16 6:52 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-16 6:52 Paul Walmsley [this message]
2011-02-16 6:52 ` [PATCH 01/11] OMAP2+: clock: disable autoidle on all clocks during clock init Paul Walmsley
2011-02-16 6:52 ` [PATCH 02/11] OMAP2: clock: add DPLL autoidle support Paul Walmsley
2011-02-16 6:52 ` [PATCH 03/11] OMAP2xxx: clock: add clockfw autoidle support for APLLs Paul Walmsley
2011-02-16 6:52 ` [PATCH 04/11] OMAP2+: clock: comment that osc_ck/osc_sys_ck should use clockfw autoidle control Paul Walmsley
2011-02-16 6:52 ` [PATCH 05/11] OMAP2+: clock: add interface clock type code with autoidle support Paul Walmsley
2011-02-16 6:52 ` [PATCH 06/11] OMAP2420: clock: add sdrc_ick Paul Walmsley
2011-02-16 6:52 ` [PATCH 07/11] OMAP2420: clock: use autoidle clkops for all autoidle-controllable interface clocks Paul Walmsley
2011-02-16 6:52 ` [PATCH 08/11] OMAP2430/3xxx: clock: add modem clock autoidle support Paul Walmsley
2011-02-16 6:52 ` [PATCH 09/11] OMAP2430: clock: use autoidle clkops for all autoidle-controllable interface clocks Paul Walmsley
2011-02-16 6:52 ` [PATCH 10/11] OMAP3: " Paul Walmsley
2011-02-16 6:52 ` [PATCH 11/11] OMAP2/3: PM: remove manual CM_AUTOIDLE bit setting in mach-omap2/pm*xx.c Paul Walmsley
2011-02-16 9:37 ` [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx Rajendra Nayak
2011-02-16 22:14 ` Paul Walmsley
2011-02-18 5:33 ` Rajendra Nayak
2011-02-16 11:15 ` Rajendra Nayak
2011-02-16 23:05 ` Paul Walmsley
2011-02-18 5:35 ` Rajendra Nayak
2011-03-01 20:58 ` Kevin Hilman
2011-03-08 3:06 ` Paul Walmsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110216065030.22089.61217.stgit@twilight.localdomain \
--to=paul@pwsan.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).